ISO Machinery Collection

Listing of active documents part of the ISO Machinery Collection.

1 2 3 4 5 6 7

ISO 3089	Machine tools Test conditions for self-centring, manually-operated chucks with one-piece jaws-Third Edition
ISO 340	Conveyor belts Laboratory scale flammability characteristics Requirements and test method-Third Edition
ISO 344	Textile Machinery and Accessories - Spinning Machines - Flyer Bobbins-First Edition
ISO 3442-1	Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 1: Manually operated chucks with tongue and groove type jaws-First Edition; Replaces ISO 3442 and ISO 9401
ISO 3552-2	Rotary Core Diamond Drilling Equipment - System B - Part 2: Inch Units First Edition
ISO 3569	Continuous Mechanical Handling Equipment - Classification of Unit Loads First Edition
ISO 363-2	Textile machinery and accessories Flat steel healds with closed end loops Part 2: Dimensions of healds manufactured of hardened strip steel-First Edition
ISO 364	Textile Machinery and Accessories - Twin Wire Healds for Weaving Machines with Heald Frames-First Edition
ISO 366-4	Textile machinery and accessories - Reeds - Part 4: Dimensions and designation of plasticbound metal reeds-Second edition
ISO 3686-1	Test Conditions for High Accuracy Turret and Single Spindle Coorinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle - Testing of the Accuracy - Part 1: Single Column Type Machines-First Edition; this First Edition Together with ISO 3686-2 Replaces ISO 3638: 1976
ISO 3686-2	Test Conditions for High Accuracy Turret and Single Spindle Coorinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle - Testing of the Accuracy - Part 2: Portal Type Machines with Moving Table-First Edition; this First Edition Together with ISO 3686-1 Replaces ISO 3638: 1976
ISO 4102	Equipment for Crop Protection - Sprayers - Connection Threading First Edition
ISO 4123	Belt Conveyors - Impact Rings for Carrying Idlers and Discs for Return Idlers - Main Dimensions First Edition;
ISO 4207	Counterbores with Morse Taper Shanks and Detachable Pilots First Edition
ISO 4230	Hand- and Machine-Operated Circular Screwing Dies for Taper Pipe Threads - R Series Second Edition
ISO 4343	Industrial Automation Systems - Numerical Control of Machines - NC Processor Output - Post-Processor Commands-Second Edition
ISO 441	Textile Machinery and Accessories - Drop Wires for Warp Stop Motions for Weaving Machines without Automatic Drawing-In-Second Edition
ISO 5051	Continuous Mechanical Handling Equipment - Deep Elevator Bucket with Flat Rear Wall - Main Dimensions First Edition
ISO 5183-1	Resistance Welding Equipment - Electrode Adaptors, Male Taper 1:10 - Part 1: Conical Fixing, Taper 1:10-Second Edition
ISO 5249	Textile Machinery and Accessories - Guide Rollers for Dyeing and Finishing Machinery - Main Dimensions First Edition
ISO 5284	Conveyor belts - List of equivalent terms Second Edition-Second edition; Corrigendum 1:2005
ISO 5407	As-Sintered Hardmetal Pellets Used in Heading Dies - Dimensions and Tolerances First Edition
ISO 5612	Mining - Scraper Bars for Chain Conveyors Second Edition
ISO 5682-3	Equipment for Crop Protection - Spraying Equipment - Part 3: Test Method for Volume/Hectare Adjustment Systems of Agricultural Hydraulic Pressure Sprayers-First Edition; Corrected and Reprinted:1997-07-01; BS 6356: Part 10: 1997
ISO 5696	Trailed Agricultural Vehicles - Brakes and Braking Devices - Laboratory Test Method First Edition
ISO 5699	Agricultural Machines, Implements and Equipment - Dimensions for Mechanical Loading with Bulk Goods First Edition
ISO 5707	Milking machine installations Construction and performance-Third edition
ISO 5708	Refrigerated Bulk Milk Tanks First Edition
ISO 5747	Pliers and Nippers - Lever Assisted Side Cutting Pliers, End and Diagonal Cutting Nippers - Dimensions Second Edition
ISO 5821	Resistance Spot Welding Electrode Caps First Edition
ISO 5827	Spot Welding - Electrode Back-Ups and Clamps First Edition; (Corrected and Reprinted - 1985)
ISO 5828	Resistance Welding Equipment - Secondary Connecting Cables with Terminals Connected to Water-Cooled Lugs - Dimensions and Characteristics-Second Edition
ISO 5830	Resistance Spot Welding - Male Electrode Caps First Edition
ISO 603-1	Bonded Abrasive Products - Dimensions - Part 1: Grinding Wheels for External Cylindrical Grinding between Centres-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-2: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976
ISO 603-13	Bonded Abrasive Products - Dimensions - Part 13: Grinding Wheels for Deburring and Fettling on a Vertical Grinder-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-12: 1999 and ISO 603-14: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976
ISO 6103	Bonded abrasive products Permissible unbalances of grinding wheels as delivered Static testing-Third edition
ISO 6178	Centrifuges - Construction and Safety Rules - Method for the Calculation of the Tangential Stress in the Shell of a Cylindrical Centrifuge Rotor First Edition
ISO 6262-2	End Mills with Indexable Inserts - Part 2: End Mills with Morse Taper Shank First Edition
ISO 6483	Earth-Moving Machinery - Dumper Bodies - Volumetric Rating First Edition
ISO 666	Machine tools Mounting of grinding wheels by means of hub flanges-Third Edition
ISO 6779	Acceptance Conditions for Broaching Machines of Vertical Internal Type - Testing of Accuracy First Edition
ISO 6898	Open Front Mechanical Power Presses - Capacity Ratings and Dimensions First Edition
ISO 702-1	Machine Tools - Connecting Dimensions of Spindle Noses and Work Holding Chucks - Part 1: Conical Connection-Second Edition
ISO 7079	Core Drills with Parallel Shanks and with Morse Taper Shanks First Edition
ISO 710-4	Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 4: Representation of Metamorphic Rocks-First Edition
ISO 710-7	Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 7: Tectonic Symbols-First Edition
ISO 7129	Earth-Moving Machinery - Cutting Edges Used on Tractor-Dozers, Graders and Scapers - Principal Shapes and Basic Dimensions-Third Edition
ISO 7149	Continuous Handling Equipment - Safety Code - Special Rules First Edition
ISO 7190	Continuous Mechanical Handling Equipment - Bucket Elevators - Classification First Edition
ISO 7256-1	Sowing Equipment - Test Methods - Part 1: Single Seed Drills (Precision Drills) First Edition
ISO 7285	Pneumatic Cylinders for Mechanized Multiple Spot Welding First Edition
ISO 7506	Textile Machinery and Accessories - Numbering of Harnesses for Drawing-In on Jacquard Machines First Edition; (Corrected and Reprinted - 1992)
ISO 7623	Steel Cord Conveyor Belts - Cord-to-Coating Bond Test - Initial Test and After Thermal Treatment Second Edition
ISO 7752-1	Lifting Appliances - Controls - Layout and Characteristics - Part 1: General Principles First Edition
ISO 7755-11	Hardmetal Burrs - Part 11: Conical Pointed-Nose Burrs (Style M) First Edition
ISO 7918	Forestry Machinery - Portable Brush-Cutters and Grass-Trimmers - Cutting Attachment Guard Dimensions Second Edition
ISO 8088	Equipment for Olive Cultivation and Olive Oil Production - Vocabulary First Edition
ISO 8114	Textile Machinery and Accessories - Spindles for Ring-Spinning and Doubling Machines - List of Equivalent Terms First Edition
ISO 8115-3	Bales - Part 3: Bales of Cotton - Packaging and Labelling First Edition
ISO 8116-3	Textile Machinery and Accessories - Beams for Winding - Part 3: Weaver's Beams Second Edition;
ISO 8116-6	Textile Machinery and Accessories - Beams for Winding - Part 6: Beams for Ribbon Weaving and Ribbon Knitting Second Edition
ISO 8116-7	Textile Machinery and Accessories - Beams for Winding - Part 7: Beams for Dyeing Silvers, Rovings and Yarns First Edition;
ISO 8117	Textile Machinery - Knitting Machines - Nominal Diameters of Circular Machines-Second Edition
ISO 8166	Resistance Welding - Procedure for the Evaluation of the Life of Spot Welding Electrodes Using Constant Machine Settings-First Edition
ISO 8169	Equipment for Crop Protection - Sprayers - Connecting Dimensions for Nozzles and Manometers First Edition
ISO 8206	Acceptance Tests for Oxygen Cutting Machines - Reproducible Accuracy - Operational Characteristics First Edition
ISO 8207	Gas Welding Equipment - Specification for Hose Assemblies for Equipment for Welding, Cutting and Allied Processes First Edition
ISO 8456	Storage Equipment for Loose Bulk Materials - Safety Code First Edition
ISO 8489-1	Textile Machinery and Accessories - Cones for Cross Winding - Part 1: Recommended Main Dimensions Second Edition
ISO 8662-7	Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 7: Wrenches, Screwdrivers and Nut Runners with Impact, Impulse or Ratchet Action-First Edition
ISO 8693	Tools for Moulding - Flat Ejector Pins-Second Edition
ISO 8976	Pliers and nippers Multiple slip joint pliers Dimensions and test values-Second Edition
ISO 9182-2	Tools for Pressing - Guide Pillars - Part 2: Type A, Straight Pillars First Edition
ISO 9182-5	Tools for Pressing - Guide Pillars - Part 5: Type D, End-Locking Pillars with Flange First Edition
ISO 92	Textile Machinery and Accessories - Spinning Machinery - Definition of Side (Left or Right)-First Edition
ISO 9242	Pliers and Nippers - Construction Worker's Pincers - Dimensions and Test Values First Edition (AS/NZS 4056.10: 1992)
ISO 9284	Abrasive Grains - Test- Sieving Machines First Edition
ISO 9285	Abrasive Grains and Crude - Chemical Analysis of Fused Aluminium Oxide-First Edition
ISO 93-2	Textile Machinery and Accessories - Cylindrical Sliver Cans - Part 2: Spring Bottoms-Third Edition
ISO 9357	Equipment for Crop Protection - Agricultural Sprayers - Tank Nominal Volume and Filling Hole Diameter First Edition
ISO 9361-2	Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners - Part 2: Dimensions of Inserts with Cylindrical Fixing Hole First Edition
ISO 9448-9	Tools for Pressing - Guide Bushes - Part 9: Form B, Ball Cage Bushes, Plain, Type 2 First Edition
ISO 9454-2	Soft Soldering Fluxes - Classification and Requirements - Part 2: Performance Requirements-First Edition
ISO 9455-13	Soft Soldering Fluxes - Test Methods - Part 13: Determination of Flux Spattering-First Edition
ISO 9473-1	Textile machinery and accessories Strip steel for dents of reeds Part 1: Cold rolled strip steel-First Edition; Together with ISO 9473-2:2006 Cancels and Replaces ISO 9473:1988
ISO 9518	Forestry Machinery - Portable Chain-Saws - Kickback Test-Second Edition
ISO 9644	Agricultural Irrigation Equipment - Pressure Losses in Irrigation Valves - Test Method-First Edition; Amendment 1-1998
ISO 9656	Pliers and nippers for electronics Test methods-Second Edition
ISO 98	Textile Machinery and Accessories - Spinning Preparatory and Spinning Machinery - Main Dimensions of Coverings for Top Rollers-Third Edition
ISO 9902-1	Textile Machinery - Noise Test Code - Part 1: Common Requirements-First Edition; Together with ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
ISO 9902-7	Textile Machinery - Noise Test Code - Part 7: Dyeing and Finishing Machinery-First Edition; Together with ISO 9902-1, ISO 9902-2, ISO 9902-3, ISO 9902-4, ISO 9902-5 and ISO 9902-6 Cancels and Replaces 9902: 1993
ISO 9904	Textile Machinery and Accessories - Steel Pins for Spinning Preparatory and Spinning Machinery-Second Edition
ISO 9912-1	Agricultural irrigation equipment Filters for micro-irrigation Part 1: Terms, definitions and classification-First Edition
ISO 9912-2	Agricultural Irrigation Equipment - Filters - Part 2: Strainer-Type Filters First Edition
ISO DIS 14649-12	Industrial Automation Systems and Integration - Physical Device Control - Data Model for Computerized Numerical Controllers - Part 12: Process Data for Turning
ISO TR 10314-2	Industrial Automation - Shop Floor Production - Part 2: Application of the Reference Model for Standardization and Methodology First Edition
ISO TR 22521	Portable hand-held forestry machines Vibration emission values at the handles Comparative data in 2002-First Edition
ISO TR 6132	Numerical Control of Machines - Operational Command and Data Format First Edition
ISO TR 9172	Continuous Mechanical Handling Equipment - Safety Code for Screw Conveyors - Examples of Guards for Trapping and Shearing Points First Edition
ISO TS 10303-1005	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1005: Application Module: Elemental Topology-First Edition
ISO TS 10303-1007	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1007: Application Module: General Surface Appearance-First Edition
ISO TS 17845	Welding and allied processes Designation system for imperfections-First Edition
ISO 10071-2	Tools for Pressing - Ball-Lock Punches - Part 2: Ball-lock punches for heavy duty-First Edition
ISO 10190	Motor Cycle Chains - Characteristics and Test Methods First Edition
ISO 10208	Rock Drilling Equipment - Left-Hand Rope Threads First Edition
ISO 10242-3	Tools for Pressing - Punch Holder Shanks - Part 3: Type D First Edition
ISO 10268	Earth-Moving Machinery - Retarders for Dumpers and Tractor-Scrapers - Performance Tests First Edition
ISO 10303-207	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 207: Application Protocol: Sheet Metal Die Planning and Design-First Edition; Technical Corrigendum 1: 03-01-2001
ISO 10303-225	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 225: Application Protocol: Building Elements Using Explicit Shape Representation-First Edition
ISO 10303-43	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic Resources: Representation Structures-Technical Corrigendum 2 04/01/2000
ISO 10303-49	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 49: Integrated Generic Resources: Process Structure and Properties-First Edition
ISO 10303-502	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 502: Application Interpreted Construct: Shell-Based Wireframe-First Edition
ISO 10303-503	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 503: Application Interpreted Construct: Geometrically Bounded 2D Wireframe-First Edition; Technical Corrigendum 1: 12/1/2006
ISO 10303-510	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 510: Application Interpreted Construct: Geometrically Bounded Wireframe-First Edition
ISO 10303-513	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 513: Application Interpreted Construct: Elementry Boundary Representation-First Edition
ISO 10303-517	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 517: Application Interpreted Construct: Mechanical Design Geometric Presentation-First Edition; Corrigendum 1: 02/01/2002
ISO 10303-518	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 518: Application Interpreted Construct: Mechanical Design Shaded Presentation-First Edition
ISO 10303-520	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 520: Application Interpreted Construct: Associative Draughting Elements-First Edition
ISO 10303-523	Industrial automation systems and integration Product data representation and exchange Part 523: Application interpreted construct: Curve swept solid-First Edition
ISO 10457	Textile machinery Dyeing and finishing machines Nominal speeds-Second Edition
ISO 1050	Continuous Mechanical Handling Equipment for Loose Bulk Materials - Screw Conveyors-First Edition
ISO 10518	Powered Walk-Behind and Hand-Held Lawn Trimmers and Lawn Edge Trimmers - Mechanical Safety Requirements and Test Methods First Edition; (Corrected and Reprinted - 1991) (Amendment 1-1994)
ISO 10626	Equipment for Crop Protection - Sprayers - Connecting Dimensions for Nozzles with Bayonet Fixing First Edition
ISO 10787-2	Textile Machinery and Accessories - Heald Frames - Part 2: Heald-Carrying Rod Fixed Directly on the Frame Stave - Coordinated Dimensions First Edition;
ISO 108	Textile Machinery and Accessories - Weaving Looms - Definition of Left and Right Sides-First Edition
ISO 1080	Machine Tools - Morse Taper Shanks - Cotter Slots with Taper Keys-First Edition
ISO 10889-1	Tool Holders with Cylindrical Shank - Part 1: Cylindrical Shank, Location Bore - Technical Delivery Conditions-Second Edition
ISO 10889-3	Tool Holders with Cylindrical Shank - Part 3: Type B with Rectangular Radial Seat-Second Edition
ISO 10889-4	Tool Holders with Cylindrical Shank - Part 4: Type C with Rectangular Axial Seat-Second Edition
ISO 10889-5	Tool Holders with Cylindrical Shank - Part 5: Type D, with More Than One Rectangular Seat-First Edition
ISO 11448	Powered Shredders and Chippers - Definitions, Safety Requirements and Test Procedures-First Edition
ISO 11545	Agricultural Irrigation Equipment - Centre-Pivot and Moving Lateral Irrigation Machines with Sprayer or Sprinkler Nozzles - Determination of Uniformity of Water Distribution-Second Edition
ISO 11677-1	Textile Machinery and Accessories - Main Dimensions of Flat Steel Healds with Open End Loops - Part 1: C-Shaped End Loops First Edition
ISO 11677-3	Textile Machinery and Accessories - Main Dimensions of Open End Loop Flat Steel Healds and Their Corresponding Heald- Carrying Rods - Part 3: Carrying Rods for Healds with C- and J-Shaped End Loops First Edition
ISO 11680-1	Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 1: Units Fitted with an Integral Combustion Engine-First Edition
ISO 11900-3	Tools for pressing Ball-lock punch retainers Part 3: Type E, reduced for heavy duty-First Edition
ISO 12511	Earth-Moving Machinery - Hour Meters-First Edition
ISO 13041-6	Test conditions for numerically controlled turning machines and turning centres Part 6: Accuracy of a finished test piece-First edition
ISO 13256-1	Water-Source Heat Pumps - Testing and Rating for Performance - Part 1: Water-to-Air and Brine-to-Air Heat Pumps-First Edition
ISO 13261-2	Sound Power Rating of Air-Conditioning and Air-Source Heat Pump Equipment - Part 2: Non-Ducted Indoor Equipment-First Edition
ISO 13281-2	Industrial Automation Systems and Integration - Manufacturing Automation Programming Environment (MAPLE) - Part 2: Services and Interfaces-First Edition
ISO 13584-20	Industrial Automation Systems and Integration - Parts Library - Part 20: Logical Resource: Logical Model of Expressions-First Edition
ISO 13754	Textile Machinery and Accessories - Hexagon Nuts and Slotted Nuts for Spinning and Twisting Spindles-First Edition
ISO 14123-1	Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery - Part 1: Principles and Specifications for Machinery Manufacturers-First Edition
ISO 14123-2	Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery - Part 2: Methodology Leading to Verification Procedures-First Edition
ISO 14223-1	Radiofrequency identification of animals Advanced transponders Part 1: Air interface-First Edition
ISO 14258	Industrial Automation Systems - Concepts and Rules for Enterprise Models-First Edition; Technical Corrigendum 1: 02-15-2000
ISO 143	Textile Machinery and Accessories - Weft Pirns for Automatic Looms-First Edition
ISO 14554-1	Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 1: Comprehensive Quality Requirements-First Edition
ISO 14740	Forest Machinery - Backpack Power Units for Brush-Cutters, Grass-Trimmers, Pole-Cutters and Similar Appliances - Safety Requirements and Testing-First Edition
ISO 15003	Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions-First Edition
ISO 15081	Agricultural irrigation equipment Graphical symbols for pressurized irrigation systems-First Edition
ISO 15147	Light Conveyor Belts - Tolerances on Widths and Lengths of Cut Light Conveyor Belts-First Edition
ISO 15615	Gas Welding Equipment - Acetylene Manifold Systems for Welding, Cutting and Allied Processes - Safety Requirements in High-Pressure Devices-First Edition
ISO 15635	Coated Abrasives - Flap Discs-First Edition
ISO 15886-1	Agricultural irrigation equipment Sprinklers Part 1: Definition of terms and classification-First Edition
ISO 16149	Agricultural irrigation equipment PVC above-ground low-pressure pipe for surface irrigation Specifications and test methods-First Edition
ISO 16366	Tools for Pressing - L-Shaped Guides-First Edition
ISO 16916	Tools for moulding Tool specification sheet for injection moulds-First Edition
ISO 17080	Manually portable agricultural and forestry machines and powered lawn and garden equipment Design principles for single-panel product safety labels-First Edition
ISO 17657-2	Resistance welding Welding current measurement for resistance welding Part 2: Welding current meter with current sensing coil-First Edition
ISO 17657-3	Resistance welding Welding current measurement for resistance welding Part 3: Current sensing coil-First Edition
ISO 17657-5	Resistance welding Welding current measurement for resistance welding Part 5: Verification of welding current measuring system-First Edition
ISO 1929	Abrasive Belts - Dimensions, Tolerances and Designation-Second Edition
ISO 1984-1	Test Conditions for Manually Controlled Milling Machines with Table of Fixed Height - Testing of the Accuracy - Part 1: Machines with Horizontal Spindle-First Edition; Together with ISO 1984-2:2001, Cancels and Replaces ISO 1984:1982 and ISO 1984-0:1984
ISO 20242-1	Industrial automation systems and integration Service interface for testing applications Part 1: Overview-First Edition
ISO 2109	Continuous Mechanical Handling Equipment - Light Duty Belt Conveyors for Loose Bulk Materials-First Edition
ISO 22368-2	Crop protection equipment Test methods for the evaluation of cleaning systems Part 2: External cleaning of sprayers-First Edition
ISO 22369-1	Crop protection equipment Drift classification of spraying equipment Part 1: Classes-First Edition
ISO 2284	Hand Taps for Parallel and Taper Pipe Threads - General Dimensions and Marking-Third Edition
ISO 22917	Superabrasives Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride-First Edition
ISO 2584	Cylindrical Cutters with Plain Bore and Key Drive - Metric Series-First Edition
ISO 2772-2	Test Conditions for Box Type Vertical Drilling Machines - Testing of the Accuracy - Part II: Practical Test First Edition
ISO 2773-2	Test Conditions for Pillar Type Vertical Drilling Machines - Testing of the Accuracy - Part II: Practical Test First Edition
ISO 2905	Modular Units for Machine Tool Construction - Spindle Noses and Adjustable Adaptors for Multi-Spindle Heads Second Edition
ISO 2976	Coated abrasives Abrasive belts Selection of width/length combinations-Second Edition
ISO 3155	Stranded Wire Ropes for Mine Hoisting - Fibre Components - Characteristics and Tests First Edition
ISO 3337	T-Slot Cutters with Cylindrical Shanks and with Morse Taper Shanks Having Tapped Hole
ISO 3364	Indexable Hardmetal (Carbide) Inserts with Rounded Corners, with Cylindrical Fixing Hole - Dimensions-Third Edition
ISO 3365	Indexable Hardmetal (Carbide) Inserts with Wiper Edges, without Fixing Hole - Dimensions Second Edition
ISO 3371	Modular Units for Machine Tool Construction - Rotary Tables and Multi-Sided Centre Bases for Rotary Tables First Edition
ISO 3408-2	Ball Screws - Part 2: Nominal Diameters and Nominal Leads - Metric Series First Edition;
ISO 342	Textile Machinery and Accessories - Worsted and Woollen Cards - Width of Cylinder and Width on the Wire-Second Edition
ISO 3551-2	Rotary Core Diamond Drilling Equipment - System A - Part 2: Inch Units First Edition
ISO 3552-1	Rotary Core Diamond Drilling Equipment - System B - Part 1: Metric Units First Edition
ISO 3589	Modular Units for Machine Tool Construction - Integral Way Columns-First Edition; Amendment 1: 1982
ISO 3610	Modular units for machine tool construction - Support brackets-First Edition
ISO 365	Textile Machinery and Accessories - Twin Wire Healds with Inset Mail for Jacquard Weaving-Second Edition
ISO 3857-1	Compressors, Pneumatic Tools and Machines - Vocabulary - Part I: General First Edition
ISO 3875	Machine tools Test conditions for external cylindrical centreless grinding machines Testing of the accuracy-Third Edition
ISO 3936	Reduction Sleeves with Tenon Drive with External and Internal 7/24 Taper - Dimensions Third Edition
ISO 3940	Tapered Die-Sinking Cutters with Parallel Shanks First Edition
ISO 3965	Agricultural Wheeled Tractors - Maximum Speeds - Method of Determination Second Edition
ISO 4195	Conveyor belts with heat-resistant rubber covers Heat resistance of covers Requirements and test methods-First edition
ISO 4197	Equipment for Working the Soil - Hoe Blades - Fixing Dimensions Second Edition
ISO 4202	Reduction Sleeves with External 7/24 Taper for Tools with Morse Taper Shanks Second Edition
ISO 4203	Parallel Shank Tools - Driving Tenons and Sockets - Dimensions First Edition
ISO 4208	Detachable Pilots for Use with Counterbores and 90 Degrees Countersinks - Dimensions First Edition
ISO 4231	Hand- and Machine-Operated Circular Screwing Dies for Parallel Pipe Threads - G Series Second Edition
ISO 433	Conveyor Belts - Marking-Second Edition, Amendment 1: 01/15/2006
ISO 4342	Numerical Control of Machines - NC Processor Input - Basic Part Program Reference Language First Edition
ISO 5232	Graphical Symbols for Textile Machinery-Second Edition
ISO 5233	Textile Machinery and Accessories - Bottom Fluted Rollers for Drafting Systems First Edition
ISO 5238-2	Textile Machinery and Accessories - Packages of Yarns and Intermediate Products - Part 2: Forms of Winding First Edition
ISO 5239	Textile Machinery and Accessories - Winding - Basic Terms First Edition
ISO 5420	Reamers - Terms, Definitions and Types First Edition
ISO 5670	Agricultural Trailers - Single-Acting Telescopic Tipping Cylinders - 25 MPa (250 Bar) Series - Types 1, 2, and 3 - Interchangeability Dimensions First Edition
ISO 5704	Equipment for Vine Cultivation and Wine Making - Grape-Harvesting Machinery - Test Methods First Edition
ISO 5734	Acceptance Conditions of Mechanical Dividing Heads for Machine Tools - Testing of Accuracy Second Edition
ISO 5746	Pliers and nippers Engineer's and Lineman's pliers Dimensions and test values-Third Edition
ISO 5826	Resistance Welding Equipment - Transformers - General Specifications Applicable to All Transformers-Second Edition
ISO 5829	Resistance Spot Welding - Electrode Adaptors, Female Taper 1 : 10 First Edition
ISO 5969	Ground Thread Taps for Pipe Threads G Series and Rp Series - Tolerances on the Threaded Portion-First Edition; Corrigendum 1: 1991
ISO 603-12	Bonded Abrasive Products - Dimensions - Part 12: Grinding Wheels for Deburring and Fettling on a Straight Grinder-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-11: 1999 and ISO 603-13: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976
ISO 603-3	Bonded Abrasive Products - Dimensions - Part 3: Grinding Wheels for Internal Cylindrical Grinding-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999, ISO 603-2: 1999 and ISO 603-4: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976
ISO 603-5	Bonded Abrasive Products - Dimensions - Part 5: Grinding Wheels for Surface Grinding/Face Grinding-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-4: 1999 and ISO 603-6: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976
ISO 603-6	Bonded Abrasive Products - Dimensions - Part 6: Grinding Wheels for Tool and Tool Room Grinding-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-5: 1999 and ISO 603-7: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976
ISO 610	High-Tensile Steel Chains (Round Link) for Chain Conveyors and Coal Ploughs-Second Edition
ISO 6105-2	Blanks for superabrasive cutting-off wheels Part 2: Hand-held cutting-off in building and civil engineering-First Edition; Together with ISO 6105-1 and 6105-2 Replaces ISO 6105:1988
ISO 6480	Conditions of Acceptance for Horizontal Internal Broaching Machines - Testing of the Accuracy Second Edition
ISO 6485	Earth-Moving Machinery - Tractor-Scraper Volumetric Rating First Edition
ISO 6686	Equipment for Crop Protection - Antidrip Devices - Determination of Performance Second Edition
ISO 6753-2	Tools for Pressing and Moulding - Machined Plates - Part 2: Machined Plates for Moulds-First Edition
ISO 6880	Machinery for Agriculture - Trailed Units of Shallow Tillage Equipment - Main Dimensions and Attachment Points First Edition
ISO 6987	Indexable Hard Material Inserts with Rounded Corners, with Partly Cylindrical Fixing Hole - Dimensions-First Edition; Cancels and Replaces ISO 6987-1: 1983, ISO 6987-2:1990 and ISO/TR 6987-3: 1990
ISO 702-2	Machine tools Connecting dimensions of spindle noses and work holding chucks Part 2: Camlock type-Second Edition
ISO 710-5	Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part 5: Representation of Minerals-Second Edition
ISO 710-II	Graphical Symbols for Use on Detailed Maps, Plans and Geological Cross-Sections - Part II: Representation of Sedimentary Rocks-First Edition
ISO 7284	Resistance Welding Equipment - Particular Specifications Applicable to Transformers with Two Separate Secondary Windings for Multi-Spot Welding, as Used in the Automobile Industry Second Edition-CEN EN ISO 7284: 1996
ISO 7286	Graphical Symbols for Resistance Welding Equipment First Edition
ISO 7292	Flowmeter Regulators used on Cylinders for Welding, Cutting and Allied Processes - Classification and Specifications-First Edition
ISO 7590	Steel Cord Conveyor Belts - Methods for the Determination of Total Thickness and Cover Thickness-Fourth Edition
ISO 7755-1	Hardmetal Burrs - Part 1: General Specifications First Edition
ISO 7755-10	Hardmetal Burrs - Part 10: Conical Round- (Ball-) Nose Burrs (Style L) First Edition
ISO 7755-3	Hardmetal Burrs - Part 3: Cylindrical Round- (Ball-) Nose Burrs (Style C) First Edition
ISO 8051	Long Shank Taps with Nominal Diameters from M3 to M10 - Full-Diameter Shank Taps with Recess-Second Edition
ISO 8094	Steel Cord Conveyor Belts - Adhesion Strength Test of the Cover to the Core Layer First Edition; (CEN EN 28094: 1994)
ISO 8116-2	Textile Machinery and Accessories - Beams for Winding - Part 2: Warper's Beams Second Edition
ISO 8116-9	Textile Machinery and Accessories - Beams for Winding - Part 9: Dyeing Beams for Textile Fabrics First Edition
ISO 8118-2	Textile machinery - Weaving machine temples - Part 2: Full-width temples-First Edition; Together with ISO 8118-1:2006 replaces ISO 8118:1986
ISO 8205-2	Water-Cooled Secondary Connection Cables for Resistance Welding - Part 2: Dimensions and Requirements for Single-Conductor Connection Cables-Second Edition
ISO 8230	Safety Requirements for Dry-Cleaning Machines Using Perchloroethylene-First Edition
ISO 8232	Closed-Circuit Dry-Cleaning Machines - Defining and Checking of Machine Characteristics First Edition
ISO 8380	Forestry Machinery - Portable Brush-Cutters and Grass-Trimmers - Cutting Attachment Guard Strength Second Edition
ISO 8489-4	Textile Machinery and Accessories - Cones for Cross Winding - Part 4: Dimensions, Tolerances and Designation of Cones with Half Angle 4 Degrees 20' for Winding for Dyeing Purposes First Edition;
ISO 8526-1	Modular Units for Machine Tools - Workholding Pallets - Part 1: Workholding Pallets up to 800 mm Nominal Size First Edition
ISO 8662-12	Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 12: Saws and Files with Reciprocating Action and Saws with Oscillating or Rotating Action-First Edition
ISO 8662-4	Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 4: Grinders First Edition; (CEN EN ISO 8662-4: 1995)
ISO 8909-2	Forage Harvesters - Part 2: Specification of Characteristics and Performance First Edition
ISO 8956	Acceptance Conditions for Copying Attachments, Integral or Otherwise, for Lathes - Testing of the Accuracy First Edition
ISO 9090	Gas Tightness of Equipment for Gas Welding and Allied Processes First Edition
ISO 9136-1	Abrasive grains Determination of bulk density Part 1: Macrogrits-First Edition; Replaces ISO 9136:1989
ISO 9182-1	Tools for Pressing - Guide Pillars - Part 1: Types First Edition
ISO 9261	Agricultural irrigation equipment Emitters and emitting pipe Specification and test methods-Second Edition
ISO 9286	Abrasive Grains and Crude - Chemical Analysis of Silicon Carbide-First Edition
ISO 93-1	Textile Machinery and Accessories - Cylindrical Sliver Cans - Part 1: Main Dimensions-Fourth Edition
ISO 9313	Resistance Spot Welding Equipment - Cooling Tubes First Edition
ISO 9361-1	Indexable Inserts for Cutting Tools - Ceramic Inserts with Rounded Corners - Part 1: Dimensions of Inserts Without Fixing Hole First Edition
ISO 9409-2	Manipulating industrial robots Mechanical interfaces Part 2: Shafts-Second Edition
ISO 9455-14	Soft Soldering Fluxes - Test Methods - Part 14: Assessment of Tackiness of Flux Residues First Edition (CEN EN 29455-14: 1993)
ISO 9455-5	Soft Soldering Fluxes - Test Methods - Part 5: Copper Mirror Test First Edition (CEN EN 29455-5: 1993)
ISO 9539	Materials for Equipment Used in Gas Welding, Cutting and Allied Processes First Edition
ISO 96-2	Textile Machinery and Accessories - Rings and Travellers for Ring Spinning and Ring Doubling Frames - Part 2: HZCH-, HZ- and J-Rings and Their Appropriate Travellers-First Edition
ISO 9635-1	Agricultural irrigation equipment Irrigation valves Part 1: General requirements-First Edition; Together with ISO 9635-2, ISO 9635-3, ISO 9635-4 and ISO 9635-5 replaces ISO 9635:1990
ISO 9635-4	Agricultural irrigation equipment Irrigation valves Part 4: Air valves-First Edition; Together with ISO 9635-1, ISO 9635-2, ISO 9635-3 and ISO 9635-5 replaces ISO 9635:1990
ISO 9766	Drills with Indexable Inserts - Cylindrical Shanks with a Parallel Flat First Edition
ISO 9898	Equipment for Crop Protection - Test Methods for Air-Assisted Sprayers for Bush and Tree Crops-First Edition
ISO 9902-2	Textile Machinery - Noise Test Code - Part 2: Spinning Preparatory and Spinning Machinery-First Edition; Together with ISO 9902-1, ISO 9902-3, ISO 9902-4, ISO 9902-5, ISO 9902-6 and ISO 9902-7 Cancels and Replaces 9902: 1993
ISO 9903-1	Textile Machinery and Accessories - Main Dimensions for Section Wires for Metallic Card Clothing - Part 1: Foot Without Interlocking or Interchaining-First Edition; Replaces ISO 9903
ISO DIS 8573-2	Compressed air - Part 2: Test methods for aerosol oil content-First Edition
ISO R916	Testing of Refrigerating Systems-First Edition
ISO TR 10450	Industrial Automation Systems and Integration - Operating Conditions for Discrete Part Manufacturing - Equipment in Industrial Environments First Edition
ISO TR 15155	Test facilities for agricultural irrigation equipment-First edition
ISO TR 17641-3	Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 3: Externally loaded tests-First edition
ISO 10073	Tools for Moulding - Support Pillars First Edition
ISO 10207	Rock Drilling Equipment - Rope Threaded Drill Steel Equipment for Percussive Drilling, Nominal Sizes 22 mm to 38 mm-First Edition; Corrigendum 1: 1991
ISO 10303-101	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 101: Intergrated Application Resources: Draughting-First Edition; Corrigendum 1: 04/15/1999
ISO 10303-105	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 105: Integrated Application Resource: Kinematics-First Edition; Technical Corrigendum 1:03/01/2000; Technical Corrigendum 2: 10/15/2000
ISO 10303-109	Industrial automation systems and integration Product data representation and exchange Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models-First Edition
ISO 10303-202	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 202: Application Protocol: Associative Draughting-First Edition
ISO 10303-47	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 47: Integrated Generic Resource: Shape Variation Tolerances-First Edition; Technical Corrigendum 1: 10/15/2000
ISO 10303-501	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 501: Application Interpreted Construct: Edge-Based Wireframe-First Edition
ISO 10303-509	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 509: Application Interpreted Construct: Manifold Surface-First Edition
ISO 10303-521	Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 521: Application Interpreted Construct: Manifold Subsurface-First Edition
ISO 10627-2	Hydraulic Agricultural Sprayers - Data Sheets - Part 2: Technical Specifications Related to Components First Edition
ISO 1089	Electrode Taper Fits for Spot Welding Equipment - Dimensions-First Edition
ISO 10898	Spot Drills First Edition (BS 328: Part 8: 1992) (NZS/BS 328: Pt 8: 1992)
ISO 11090-2	Machine Tools - Test Conditions for Die Sinking Electro-Discharge Machines (EDM) - Terminology and Testing of Accuracy - Part 2: Two Column Machines (Slide-Head Type and Cross-Slide Table Type)-First Edition
ISO 11111-2	Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines-First Edition; ISO 11111-2 together with ISO 11111-1 , -3, -4, -5, -6, and -7, cancels and replaces ISO 11111:1995
ISO 11111-3	Textile machinery Safety requirements Part 3: Nonwoven machinery-First Edition; ISO 11111-3 together with ISO 11111-1 , -2, -4, -5, -6, and -7, cancels and replaces ISO 11111:1995
ISO 11415	Tools for Pressing - Die Sets-First Edition
ISO 11659-1	Textile Machinery and Accessories - Machine Parts in Contact with Textile Processing Oils - Part 1: Determination of Anticorrosive Effect upon Steel First Edition
ISO 11659-2	Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on polymeric materials-First Edition
ISO 11681-2	Machinery for forestry Portable chain-saw safety requirements and testing Part 2: Chain-saws for tree service-Second Edition
ISO 11682	Brush-Cutters and Grass-Trimmers - Technical Data First Edition; (Corrected and Reprinted - 1994)
ISO 11788-1	Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 1: General Description-First Edition
ISO 11788-3	Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 3: Pig Farming-First Edition
ISO 11900-2	Tools for Pressing - Ball-Lock Punch Retainers - Part 2: Types C and D, Reduced for Light Duty-First Edition
ISO 11901-2	Tools for pressing Gas springs Part 2: Specification of accessories-Second Edition
ISO 12145	Resistance Welding Equipment - Angles for Mounting Spot Welding Electrodes-First Edition