|
ISO 9346 |
Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary-Second Edition |
|
ISO TR 22824 |
Welding consumables Predicted and measured FN in specifications A position statement of the experts of IIW Commission IX-First Edition |
|
ISO 10303-14 |
Industrial automation systems and integration Product data representation and exchange Part 14: Description methods: The EXPRESS-X language reference manual-First Edition |
|
ISO 10303-238 |
Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers-First Edition |
|
ISO 11529-1 |
Milling Cutters - Designation - Part 1: Shank-type end mills of solid or tipped design-Second Edition |
|
ISO 12164-2 |
Hollow Taper Interface with Flange Contact Surface - Part 2: Receivers - Dimensions-First Edition |
|
ISO 14271 |
Vickers Hardness Testing of Resistance Spot, Projection and Seam Welds (Low Load and Microhardness)-First Edition |
|
ISO 14273 |
Specimen Dimensions and Procedure for Shear Testing Resistance Spot, Seam and Embossed Projection Welds-First Edition |
|
ISO 14324 |
Resistance spot welding Destructive tests of welds Method for the fatigue testing of spot welded joints-First Edition |
|
ISO 15488 |
Collets with 8 ° setting angle for tool shanks Collets, nuts and fitting dimensions-Second Edition |
|
ISO 15609-2 |
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Specification - Part 2: Gas Welding-First Edition |
|
ISO 15614-5 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 5: Arc welding of titanium, zirconium and their alloys-First Edition |
|
ISO 15614-8 |
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 8: Welding of Tubes to Tube-Plate Joints-First Edition |
|
ISO 15792-2 |
Welding Consumables - Test Methods - Part 2: Preparation of Single-Run and Two-Run Technique Test Specimens in Steel-First Edition |
|
ISO 2107 |
Aluminium and aluminium alloys Wrought products Temper designations-Third Edition |
|
ISO 2380-1 |
Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 1: Tips for hand- and machine-operated screwdrivers-Third Edition |
|
ISO 2380-2 |
Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers-Third Edition |
|
ISO 2972 |
Numerical Control of Machines - Symbols Second Edition |
|
ISO 3821 |
Gas Welding Equipment - Rubber Hoses for Welding, Cutting and Allied Processes-Third Edition |
|
ISO 5151 |
Non-Ducted Air Conditioners and Heat Pumps - Testing and Rating for Performance First Edition; |
|
ISO 7388-2 |
Tool shanks with 7/24 taper for automatic tool changers Part 2: Dimensions and designation of shanks of forms J, JD and JF-Second Edition |
|
ISO 8688-1 |
Tool Life Testing in Milling - Part 1: Face Milling First Edition |
|
ISO 8688-2 |
Tool Life Testing in Milling - Part 2: End Milling First Edition |
|
ISO 10303-201 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 201: Application Protocol: Explicit Draughting First Edition |
|
ISO 10303-209 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 209: Application Protocol: Composite and Metallic Structural Analysis and Related Design-First Edition |
|
ISO 10303-22 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 22: Implementation Methods: Standard Data Access Interface-First Edition |
|
ISO 11126-1 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 1: General Introduction and Classification-First Edition; Corrigendum 1-1997, Corrigendum 2-1997 |
|
ISO 11650 |
Performance of Refrigerant Recovery and/or Recycling Equipment-First Edition |
|
ISO 15609-5 |
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding-First Edition |
|
ISO 17655 |
Destructive Tests on Welds in Metallic Materials - Method for Taking Samples for Delta Ferrite Measurement-First Edition |
|
ISO 18273 |
Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification-First edition |
|
ISO 22825 |
Non-destructive testing of welds Ultrasonic testing Testing of welds in austenitic steels and nickel-based alloys-First Edition |
|
ISO 2710-2 |
Reciprocating Internal Combustion Engines - Vocabulary - Part 2: Terms for Engine Maintenance-First Edition |
|
ISO 6462 |
Face Milling Cutters with Indexable Inserts - Dimensions First Edition; (ANSI 6462-1983) |
|
ISO 6520-2 |
Welding and Allied Processes - Classification of Geometric Imperfections in Metallic Materials - Part 2: Welding with Pressure-First Edition |
|
ISO 6759 |
Seamless Steel Tubes for Heat Exchangers First Edition |
|
ISO 9015-2 |
Destructive tests on welds in metallic materials Hardness testing Part 2: Microhardness testing of welded joints-First Edition |
|
ISO 9488 |
Solar Energy - Vocabulary-First Edition |
|
ISO 9692-1 |
Welding and allied processes Recommendations for joint preparation Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels-First Edition; |
|
ISO TS 13399-2 |
Cutting tool data representation and exchange Part 2: Reference dictionary for the cutting items-First Edition |
|
ISO TS 13399-5 |
Cutting tool data representation and exchange Part 5: Reference dictionary for assembly items-First Edition |
|
ISO 1071 |
Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification-Second Edition |
|
ISO 10887 |
Key Type Three-Jaw Drill Chucks - Specification-First Edition |
|
ISO 14137 |
Machine Tools - Test Conditions for Wire Electrical-Discharge Machines (Wire EDM) - Terminology and Testing of the Accuracy-First Edition |
|
ISO 14713 |
Protection Against Corrosion of Iron and Steel in Structures - Zinc and Aluminium Coatings - Guidelines-First Edition |
|
ISO 14916 |
Thermal Spraying - Determination of Tensile Adhesive Strength-First Edition |
|
ISO 15531-1 |
Industrial automation systems and integration Industrial manufacturing management data Part 1: General overview-First Edition |
|
ISO 15601 |
Hammers - Technical Specifications Concerning Steel Hammer Heads - Test Procedures-First Edition |
|
ISO 15614-10 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 10: Hyperbaric dry welding-First Edition |
|
ISO 15616-1 |
Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 1: General Principles, Acceptance Conditions-First Edition |
|
ISO 2780 |
Milling cutters with tenon drive Interchangeability dimensions for cutter arbors Metric series-Third Edition |
|
ISO 3002-5 |
Basic Quantities in Cutting and Grinding - Part 5: Basic Terminology for Grinding Processes Using Grinding Wheels First Edition |
|
ISO 3293 |
Morse Taper Shank Countersinks for Angles 60 Degrees, 90 Degrees and 120 Degrees Inclusive First Edition |
|
ISO 3859 |
Inverse Dovetail Cutters and Dovetail Cutters with Cylindrical Shanks-Third Edition |
|
ISO 5742 |
Pliers and nippers Nomenclature-Second Edition |
|
ISO 6622-1 |
Internal combustion engines Piston rings Part 1: Rectangular rings made of cast iron-Second Edition |
|
ISO 669 |
Resistance Welding - Resistance Welding Equipment - Mechanical and Electrical Requirements-Second Edition * Corrected and Reprinted 03/15/2001 |
|
ISO 6983-1 |
Numerical Control of Machines - Program Format and Definition of Address Words - Part 1: Data Format for Positioning, Line Motion and Contouring Control Systems-First Edition |
|
ISO 6986 |
Side and Face Milling (Slotting) Cutters with Indexable Inserts - Dimensions First Edition; (ANSI 6986-1983) |
|
ISO 7599 |
Anodizing of Aluminium and Its Alloys - General Specifications for Anodic Oxide Coatings on Aluminium First Edition |
|
ISO 7668 |
Anodized Aluminium and Aluminium Alloys - Measurement of Specular Reflectance and Specular Gloss at Angles of 20 Degrees, 45 Degrees, 60 Degrees or 85 Degrees First Edition |
|
ISO 8017 |
Tools for moulding Guide pillars, straight and shouldered, and locating guide pillars, shouldered-Second Edition |
|
ISO 9606-2 |
Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys-Second Edition |
|
ISO 10103 |
Assembly Tools for Screws and Nuts - Double-Headed, Flat and Offset, Box Wrenches - Length of Wrenches and Thickness of the Heads-Second Edition |
|
ISO 10303-104 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 104: Integrated Application Resource: Finite Element Analysis-First Edition |
|
ISO 10791-4 |
Test Conditions for Machining Centres - Part 4: Accuracy and Repeatability of Positioning of Linear and Rotary Axes-First Edition |
|
ISO 10791-8 |
Test Conditions for Machining Centres - Part 8: Evaluation of Contouring Performance in the Three Coordinate Planes-First Edition |
|
ISO 11086 |
Gas Turbines - Vocabulary First Edition |
|
ISO 11126-4 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 4: Coal Furnace Slag First Edition |
|
ISO 11529-2 |
Milling Cutters - Designation - Part 2: Shank-type and bore-type milling cutters with indexable inserts-Second Edition; Replaces ISO 7848: 1986 |
|
ISO 13041-1 |
Test conditions for numerically controlled turning machines and turning centres Part 1: Geometric tests for machines with a horizontal workholding spindle-First Edition |
|
ISO 14232 |
Thermal Spraying - Powders - Composition and Technical Supply Conditions-First Edition |
|
ISO 15616-2 |
Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 2: Measurement of Static and Dynamic Accuracy-First Edition |
|
ISO 16433 |
Resistance welding Procedure for seam welding of uncoated and coated low carbon steels-First Edition |
|
ISO 17634 |
Welding consumables Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels Classification-First Edition |
|
ISO 17659 |
Welding - Multilingual Terms for Welded Joints with Illustrations-First Edition |
|
ISO 17662 |
Welding Calibration, verification and validation of equipment used for welding, including ancillary activities-First Edition |
|
ISO 2082 |
Metallic Coatings - Electroplated Coatings of Cadmium on Iron or Steel-Second Edition |
|
ISO 2135 |
Anodizing of Aluminium and Its Alloys - Accelerated Test of Light Fastness of Coloured Anodic Oxide Coatings Using Artificial Light-Second Edition |
|
ISO 23551-4 |
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves-First Edition |
|
ISO 236-2 |
Long Fluted Machine Reamers, Morse Taper Shanks-First Edition; Amendment 1: 2/15/1977 |
|
ISO 2568 |
Hand- and Machine-Operated Circular Screwing Dies and Hand-Operated Die Stocks-Second Edition |
|
ISO 2747 |
Vitreous and Porcelain Enamels - Enamelled Cooking Utensils - Determination of Resistance to Thermal Shock-Second Edition |
|
ISO 299 |
Machine Tool Tables - T-Slots and Corresponding Bolts-Second Edition |
|
ISO 3070-2 |
Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 2: Machines with movable column and fixed table-Third Edition |
|
ISO 3338-3 |
Cylindrical Shanks for Milling Cutters - Part 3: Dimensional Characteristics of Threaded Shanks-First Edition |
|
ISO 3613 |
Chromate Conversion Coatings on Zinc,Cadmium, Aluminium-Zinc Alloys and Zinc-Aluminium Alloys - Test Methods-Second Edition |
|
ISO 4229 |
Assembly Tools for Screws and Nuts - Single-Head Engineer s Wrenches - Gaps from 50 to 120 mm First Edition |
|
ISO 4524-5 |
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 5: Adhesion Tests First Edition |
|
ISO 4548-3 |
Methods of Test for Full-Flow Lubricating Oil Filters for Internal Combustion Engines - Part 3: Resistance to High Pressure and to Elevated Temperature-Second Edition |
|
ISO 494 |
Parallel Shank Twist Drills - Long Series-First Edition |
|
ISO 5608 |
Turning and Copying Tool Holders and Cartridges for Indexable Inserts - Designation Third Edition |
|
ISO 7345 |
Thermal Insulation - Physical Quantities and Definitions Second Edition; (CEN EN ISO 7345: 1995) |
|
ISO 7967-4 |
Reciprocating internal combustion engines Vocabulary of components and systems Part 4: Pressure charging and air/exhaust gas ducting systems-Second Edition |
|
ISO 8291 |
Vitreous and Porcelain Enamels - Method of Test of Self-Cleaning Properties First Edition |
|
ISO 8540 |
Open Front Mechanical Power Presses - Vocabulary First Edition |
|
ISO 8662-6 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 6: Impact Drills First Edition; (CEN EN ISO 8662-6: 1995) |
|
ISO 9016 |
Destructive Tests on Welds in Metallic Materials - Impact Tests - Test Specimen Location, Notch Orientation and Examination-First Edition |
|
ISO 9288 |
Thermal Insulation - Heat Transfer by Radiation - Physical Quantities and Definitions First Edition (CEN EN ISO 9288: 1996) |
|
ISO 9506-2 |
Industrial Automation Systems - Manufacturing Message Specification - Part 2: Protocol Specification-Second Edition |
|
ISO PAS 26183 |
SASIG Product data quality guidelines for the global automotive industry-First Edition |
|
ISO TR 581 |
Weldability Metallic materials General principles-First Edition; Replaces ISO 581: 1980 |
|
ISO 10303-41 |
Industrial automation systems and integration Product data representation and exchange Part 41: Integrated generic resource: Fundamentals of product description and support-Third Edition |
|
ISO 10564 |
Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis First Edition |
|
ISO 10684 |
Fasteners Hot dip galvanized coatings-First Edition |
|
ISO 10791-6 |
Test Conditions for Machining Centres - Part 6: Accuracy of Feeds, Speeds and Interpolations-First Edition; Technical Corrigendum 1:4/1/2004 |
|
ISO 10981 |
Nuclear fuel technology Determination of uranium in reprocessing-plant dissolver solution Liquid chromatography method-Second Edition |
|
ISO 13584-42 |
Industrial Automation Systems and Integration - Parts Library - Part 42: Description Methodology: Methodology for Structuring Part Families-First Edition; Technical Corrigendum 1: 01/15/2003 |
|
ISO 13919-2 |
Welding - Electron and Laser Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 2: Aluminium and its Weldable Alloys-First Edition |
|
ISO 14174 |
Welding consumables Fluxes for submerged arc welding Classification-First Edition |
|
ISO 14649-12 |
Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 12: Process data for turning-First Edition |
|
ISO 15011-2 |
Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 2: Determination of emission rates of gases, except ozone-First Edition |
|
ISO 15614-13 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Resistance butt and flash welding-First Edition |
|
ISO 15641 |
Milling Cutters for High Speed Machining - Safety Requirements-First Edition |
|
ISO 15745-5 |
Industrial automation systems and integration Open systems application integration framework Part 5: Reference description for HDLC-based control systems-First Edition |
|
ISO 1711-2 |
Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets ( |
|
ISO 17660-2 |
Welding Welding of reinforcing steel Part 2: Non load-bearing welded joints-First Edition |
|
ISO 18278-1 |
Resistance welding Weldability Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials-First Edition |
|
ISO 2093 |
Electroplated Coatings of Tin - Specification and Test Methods-Second Edition |
|
ISO 2177 |
Metallic Coatings - Measurement of Coating Thickness - Coulometric Method by Anodic Dissolution-Third Edition |
|
ISO 22827-2 |
Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism-First Edition |
|
ISO 2586 |
Shell End Mills with Plain Bore and Tenon Drive - Metric Series-Second Edition |
|
ISO 3002-4 |
Basic Quantities in Cutting and Grinding - Part 4: Forces, Energy, Power First Edition |
|
ISO 3286 |
Single Point Cutting Tools - Corner Radii First Edition |
|
ISO 3581 |
Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Stainless and Heat-Resisting Steels - Classification-Second Edition |
|
ISO 866 |
Centre Drills for Centre Holes without Protecting Chamfers - Type A-First Edition |
|
ISO 9018 |
Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints-First Edition |
|
ISO 9506-1 |
Industrial Automation Systems - Manufacturing Message Specification - Part 1: Service Definition-Second Edition |
|
ISO 9692-4 |
Welding and allied processes - Recommendations for joint preparation Part 4: Clad steels-First Edition |
|
ISO 9806-3 |
Test Methods for Solar Collectors - Part 3: Thermal Performance of Unglazed Liquid Heating Collectors (Sensible Heat Transfer Only) Including Pressure Drop First Edition |
|
ISO 9847 |
Solar Energy - Calibration of Field Pyranometers by Comparison to a Reference Pyranometer First Edition |
|
ISO DIS 6983-1 |
Industrial automation systems and integration Numerical control of machines Program format and definitions of address words Part 1: Data format for positioning, line motion and contouring control systems |
|
ISO TR 10303-12 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 12: Description Methods: The EXPRESS-I Language Reference Manual-First Edition |
|
ISO 10303-240 |
Industrial automation systems and integration Product data representation and exchange Part 240: Application protocol: Process plans for machined products-First Edition |
|
ISO 10791-1 |
Test Conditions for Machining Centres - Part 1: Geometric Tests for Machines with Horizontal Spindle and with Accessory Heads (Horizontal Z-Axis)-First Edition; Corrected and Reprinted 05/01/1999 |
|
ISO 10882-1 |
Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator s Breathing Zone - Part 1: Sampling of Airborne Particles-First Edition |
|
ISO 11127-1 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 1: Sampling First Edition |
|
ISO 13584-25 |
Industrial automation systems and integration Parts library Part 25: Logical resource: Logical model of supplier library with aggregate values and explicit content-First Edition |
|
ISO 14231 |
Thermal Spraying - Acceptance Inspection of Thermal Spraying Equipment-First Edition |
|
ISO 1458 |
Metallic coatings Electrodeposited coatings of nickel-Third Edition |
|
ISO 15614-6 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys-First Edition |
|
ISO 15616-3 |
Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting - Part 3: Calibration of Instruments for Measurement of Gas Flow and Pressure-First Edition |
|
ISO 15695 |
Vitreous and Porcelain Enamels - Determination of Scratch Resistance of Enamel Finishes-First Edition; Technical Corrigendum,11/01/2000 |
|
ISO 17658 |
Welding - Imperfections in Oxyfuel Flame Cuts, Laser Beam Cuts and Plasma Cuts - Terminology-First Edition |
|
ISO 19860 |
Gas turbines Data acquisition and trend monitoring system requirements for gas turbine installations-First edition |
|
ISO 2238 |
Machine Bridge Reamers-First Edition |
|
ISO 2376 |
Anodization (Anodic Oxidation) of Aluminium and Its Alloys - Insulation Check by Measurement of Breakdown Potential-First Edition |
|
ISO 297 |
7/24 Tapers for Tool Shanks for Manual Changing-Second Edition |
|
ISO 3002-2 |
Basic Quantities in Cutting and Grinding - Part 2: Geometry of the Active Part of Cutting Tools - General Conversion Formulae to Relate Tool and Working Angles First Edition |
|
ISO 3002-3 |
Basic Quantities in Cutting and Grinding - Part 3: Geometric and Kinematic Quantities in Cutting First Edition |
|
ISO 3408-1 |
Ball screws Part 1: Vocabulary and designation-Second Edition |
|
ISO 4518 |
Metallic Coatings - Measurement of Coating Thickness - Profilometric Method First Edition; (CEN EN ISO 4518: 1995) (PNS 679: 1990) |
|
ISO 4522-1 |
Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 1: Determination of Coating Thickness First Edition |
|
ISO 4548-9 |
Methods of test for full-flow lubricating oil filters for internal combustion engines Part 9: Inlet and outlet anti-drain valve tests-Second Edition |
|
ISO 5179 |
Investigation of Brazeability Using a Varying Gap Test Piece First Edition |
|
ISO 5187 |
Welding and Allied Processes - Assemblies Made with Soft Solders and Brazing Filler Metals - Mechanical Test Methods First Edition |
|
ISO 525 |
Bonded Abrasive Products - General Requirements-Third Edition |
|
ISO 5419 |
Twist Drills - Terms, Definitions and Types-First Edition; Corrigendum 1- 1996 |
|
ISO 6261 |
Boring Bars (Tool Holders with Cylindrical Shank) for Indexable Inserts - Designation Second Edition |
|
ISO 7967-1 |
Reciprocating internal combustion engines Vocabulary of components and systems Part 1: Structure and external covers-Second Edition |
|
ISO 7967-2 |
Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 2: Main Running Gear-First Edition; Amendment 1 12/01/1999 |
|
ISO 7967-3 |
Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 3: Valves, Camshaft Drive and Actuating Mechanisms First Edition |
|
ISO 7967-9 |
Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 9: Control and Monitoring Systems First Edition |
|
ISO 8018 |
Tools for moulding Guide bushes, headed, and locating guide bushes, headed-Second Edition |
|
ISO 8764-1 |
Assembly tools for screws and nuts Screwdrivers for cross-recessed head screws Part 1: Driver tips-Third Edition |
|
ISO 9449 |
Tools for moulding Centring sleeves-Second Edition |
|
ISO 9692-3 |
Welding and Allied Processes - Recommendations for Joint Preparation - Part 3: Metal Inert Gas Welding and Tungsten Inert Gas Welding of Aluminium and its Alloys-First Edition |
|
ISO 9806-1 |
Test Methods for Solar Collectors - Part 1: Thermal Performance of Glazed Liquid Heating Collectors Including Pressure Drop First Edition |
|
ISO 10242-2 |
Tools for Pressing - Punch Holder Shanks - Part 2: Type C First Edition |
|
ISO 10243 |
Tools for Pressing - Compression Springs with Rectangular Section - Housing Dimensions and Colour Coding First Edition |
|
ISO 10303-218 |
Industrial automation systems and integration Product data representation and exchange Part 218: Application protocol: Ship structures-First Edition |
|
ISO 10303-32 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 32: Conformance Testing Methodology and Framework: Requirements on Testing Laboratories and Clients-First Edition |
|
ISO 10303-34 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 34: Conformance Testing Methodology and Framework: Abstract Test Methods for Application Protocol Implementations-First Edition |
|
ISO 10303-43 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic Resource: Representation Structures-Second Edition |
|
ISO 10303-44 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 44: Integrated Generic Resources: Product Structure Configuration-First Edition; Technical Corrigendum 1: 03-15-1999 |
|
ISO 10303-504 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 504: Application Interpreted Construct: Draughting Annotation-First Edition |
|
ISO 10791-9 |
Test Conditions for Machining Centres - Part 9: Evaluation of the Operating Times of Tool Change and Pallet Change-First Edition |
|
ISO 10882-2 |
Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator s Breathing Zone - Part 2: Sampling of Gases-First Edition |
|
ISO 10889-2 |
Tool Holders with Cylindrical Shank - Part 2: Type A, Shanks for Tool Holders of Special Designs-Second Edition |
|
ISO 11127-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 3: Determination of Apparent Density First Edition |
|
ISO 1180 |
Shanks for Pneumatic Tools and Dimensions of Chuck Bushings-First Edition; Addendum 1-1985; NZS/ISO 1180: 1983 |
|
ISO 12166 |
Resistance Welding Equipment - Particular Specifications Applicable to Transformers with One Secondary Winding for Multi-Spot Welding, as Used in the Automobile Industry-First Edition |
|
ISO 13041-5 |
Test conditions for numerically controlled turning machines and turning centres Part 5: Accuracy of feeds, speeds and interpolations-First Edition |
|
ISO 13584-31 |
Industrial Automation Systems and Integration - Parts Library - Part 31: Implementation Resources: Geometric Programming Interface-First Edition |
|
ISO 14272 |
Specimen Dimensions and Procedure for Cross Tension Testing Resistance Spot and Embossed Projection Welds-First Edition |
|
ISO 14343 |
Welding Consumables - Wire Electrodes, Wires and Rods for Arc Welding of Stainless and Heat Resisting Steels - Classification-First Edition |
|
ISO 14539 |
Manipulating Industrial Robots - Object Handling with Grasp-Type Grippers - Vocabulary and Presentation of Characteristics-First Edition |
|
ISO 14917 |
Thermal Spraying - Terminology, Classification-First Edition |
|
ISO 15011-3 |
Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 3: Determination of ozone concentration using fixed point measurements-First Edition |
|
ISO 15744 |
Hand-Held Non-Electric Power Tools - Noise Measurement Code - Engineering Method (Grade 2)-First Edition |
|
ISO 15745-3 |
Industrial automation systems and integration Open systems application integration framework Part 3: Reference description for IEC 61158-based control systems-First Edition |
|
ISO 16100-3 |
Industrial automation systems and integration Manufacturing software capability profiling for interoperability Part 3: Interface services, protocols and capability templates-First Edition |
|
ISO 1641-2 |
End Mills and Slot Drills - Part II: Milling Cutters with Morse Taper Shanks-First Edition |
|
ISO 1651 |
Tube Drawing Mandrels-First Edition; Amendment 1-1982 |
|
ISO 17643 |
Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis-First Edition |
|
ISO 18278-2 |
Resistance welding Weldability Part 2: Alternative procedures for the assessment of sheet steels for spot welding-First Edition |
|
ISO 18594 |
Resistance spot-, projection- and seamwelding Method for determining the transition resistance on aluminium and steel material-First Edition |
|
ISO 18629-14 |
Industrial automation systems and integration Process specification language Part 14: Resource theories-First Edition |
|
ISO 2079 |
Surface Treatment and Metallic Coatings - General Classification of Terms-Second Edition |
|
ISO 22779 |
Metallic coatings Physical vapour-deposited coatings of aluminium Specification and test methods-First Edition |
|
ISO 22827-1 |
Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly-First Edition |
|
ISO 23551-3 |
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 3: Gas/air ratio controls, pneumatic type-First edition |
|
ISO 239 |
Drill Chuck Tapers-Second Edition |
|
ISO 2723 |
Vitreous and Porcelain Enamels for Sheet Steel - Production of Specimens for Testing-Second Edition |
|
ISO 2787 |
Rotary and Percussive Pneumatic Tools - Performance Tests Second Edition |
|
ISO 2940-1 |
Milling Cutters Mounted on Centring Arbors Having a 7/24 Taper - Fitting Dimensions - Centring Arbors First Edition; (Erratum-1977) |
|
ISO 3408-3 |
Ball screws Part 3: Acceptance conditions and acceptance tests-Second Edition |
|
ISO 3439 |
Subland Twist Drills with Cylindrical Shanks for Holes Prior to Tapping Screw Threads-Second Edition |
|
ISO 4521 |
Metallic Coatings - Electrodeposited Silver and Silver Alloy Coatings for Engineering Purposes First Edition |
|
ISO 4522-3 |
Metallic Coatings - Test Methods for Electrodeposited Silver and Silver Alloy Coatings - Part 3: Determination of the Presence of Residual Salts First Edition |
|
ISO 4524-4 |
Metallic Coatings - Test Methods for Electrodeposited Gold and Gold Alloy Coatings - Part 4: Determination of Gold Content First Edition |
|
ISO 4703 |
Test Conditions for Surface Grinding Machines with Two Columns - Machines for Grinding Slideways - Testing of Accuracy-Third Edition |
|
ISO 5172 |
Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests-Third Edition;:1995 |
|
ISO 521 |
Machine Chucking Reamers with Parallel Shanks or Morse Taper Shanks-First Edition |
|
ISO 5414-2 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 2: Connecting dimensions of chucks and designation |
|
ISO 5421 |
Ground High Speed Steel Tool Bits First Edition |
|
ISO 5967 |
Taps and Thread Cutting - Nomenclature of the Main Types and Terminology First Edition |
|
ISO 693 |
Dimensions of Seam Welding Wheel Blanks-First Edition |
|
ISO 6988 |
Metallic and Other Non-Organic Coatings - Sulfur Dioxide Test with General Condensation of Moisture First Edition; (CEN EN ISO 6988: 1994) |
|
ISO 702-4 |
Machine tools Connecting dimensions of spindle noses and work holding chucks Part 4: Cylindrical connection-First Edition |
|
ISO 7587 |
Electroplated Coatings of Tin-Lead Alloys - Specification and Test Methods First Edition |
|
ISO 7967-6 |
Reciprocating internal combustion engines Vocabulary of components and systems Part 6: Lubricating systems-Second Edition |
|
ISO 8167 |
Projections for Resistance Welding First Edition |
|
ISO 8636-1 |
Machine Tools - Test Conditions for Bridge-Type Milling Machines - Testing of the Accuracy - Part 1: Fixed Bridge (Portal-Type) Machines-Second Edition |
|
ISO 8662-11 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 11: Fastener Driving Tools-First Edition; Amendment 1 12/01/2001 |
|
ISO 883 |
Indexable Hardmetal (Carbide) Inserts with Rounded Corners, without Fixing Hole - Dimensions-Third Edition |
|
ISO 8830 |
High-Speed Steel Machine Taps with Ground Threads - Technical Specifications First Edition |
|
ISO 8990 |
Thermal Insulation - Determination of Steady-State Thermal Transmission Properties -Calibrated and Guarded Hot Box First Edition-CEN EN ISO 8990: 1996 |
|
ISO 8994 |
Anodized Aluminium and Aluminium Alloys - Rating System for the Evaluation of Pitting Corrosion - Grid Method First Edition |
|
ISO 9012 |
Gas welding equipment Air-aspirated hand blowpipes Specifications and tests-Third Edition |
|
ISO 9409-1 |
Manipulating industrial robots Mechanical interfaces Part 1: Plates-Third Edition |
|
ISO 9448-11 |
Tools for Pressing - Guide Bushes - Part 11: Form F, Ball Cage Bushes, Flanged, Type 2 First Edition |
|
ISO 9806-2 |
Test Methods for Solar Collectors - Part 2: Qualification Test Procedures First Edition |
|
ISO DIS 10303-28 |
Industrial automation systems and integration Product data representation and exchange Part 28: Implementation methods: XML representations of EXPRESS schemas and data |
|
ISO TR 10217 |
Solar Energy - Water Heating Systems - Guide to Material Selection with Regard to Internal Corrosion First Edition |
|
ISO TR 11728 |
Anodized Aluminium and Aluminium Alloys - Accelerated Test of Weather Fastness of Coloured Anodic Oxide Coatings Using Cyclic Artificial Light and Pollution Gas First Edition |
|
ISO TR 20174 |
Welding Grouping systems for materials Japanese materials-First edition |
|
ISO TS 10303-1009 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1009: Application Module: Shape Appearance and Layers-First Edition |
|
ISO TS 17104 |
Rotary tool for threaded fasteners Hydraulic impulse tools Performance test method-First Edition |
|
ISO TS 21108 |
Hand-held power tools Impulse wrenches Dimensions and tolerances of interface to power socket-First edition |
|
ISO 10074 |
Specification for Hard Anodic Oxidation Coatings on Aluminium and its Alloys First Edition |
|
ISO 10104 |
Assembly Tools for Screws and Nuts - Double-Headed, Deep Offset and Modified Offset, Box Wrenches - Length of Wrenches and Thickness of the Heads-Second Edition |
|
ISO 10303-511 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 511: Application Interpreted Construct: Topologically Bounded Surface-First Edition |
|
ISO 10303-522 |
Industrial automation systems and integration Product data representation and exchange Part 522: Application interpreted construct: Machining features-Second Edition |
|
ISO 10656 |
Electric Resistance Welding - Integrated Transformers for Welding Guns-First Edition; Corrigendum 1: 07/01/2000 |
|
ISO 10888 |
Keyless Type Three-Jaw Drill Chucks - Specification-First Edition |
|
ISO 11126-5 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 5: Nickel Refinery Slag First Edition |
|
ISO 11126-6 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non- Metallic Blast-Cleaning Abrasives - Part 6: Iron Furnace Slag First Edition |
|
ISO 11126-7 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning Abrasives - Part 7: Fused Aluminium Oxide-First Edition; Technical Corrigendum: 02-15-1999 |
|
ISO 11127-4 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non- Metallic Blast-Cleaning Abrasives - Part 4: Assessment of Hardness by a Glass Slide Test First Edition |
|
ISO 1129 |
Steel Tubes for Boilers, Superheaters and Heat Exchangers - Dimensions, Tolerances and Conventional Masses per Unit Length-Second Edition |
|
ISO 12807 |
Safe Transport of Radioactive Materials - Leakage Testing on Packages First Edition |
|
ISO 13041-4 |
Test conditions for numerically controlled turning machines and turning centres Part 4: Accuracy and repeatability of positioning of linear and rotary axes-First Edition |
|
ISO 13584-24 |
Industrial automation systems and integration Parts library Part 24: Logical resource: Logical model of supplier library-First Edition |
|
ISO 13584-26 AMD 1 |
Industrial automation systems and integration Parts library Part 26: Logical resource: Information supplier identification AMENDMENT 1-First Edition |
|
ISO 14647 |
Matallic Coatings - Determination of Porosity in Gold Coatings on Metal Substrates - Nitric Acid Vapour Test-First Edition |
|
ISO 14649-10 |
Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 10: General process data-Second Edition |
|
ISO 15011-4 |
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets-First Edition |
|
ISO 15917 |
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials Dimensions-First Edition |
|
ISO 1641-3 |
End Mills and Slot Drills - Part 3: Milling Cutters with 7/24 Taper Shanks-Second Edition |
|
ISO 16797 |
Nuclear energy Soxhlet-mode chemical durability test Application to vitrified matrixes for high-level radioactive waste-First Edition |
|
ISO 17642-1 |
Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 1: General-First Edition |
|
ISO 17642-2 |
Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes Part 2: Self-restraint tests-First Edition |
|
ISO 17652-3 |
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 3: Thermal Cutting-First Edition |
|
ISO 17652-4 |
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 4: Emission of Fumes and Gases-First Edition |
|
ISO 18084 |
Press tools for tablets Punches and dies-First edition |
|
ISO 18629-13 |
Industrial automation systems and integration Process specification language Part 13: Duration and ordering theories-First Edition |
|
ISO 21968 |
Non-magnetic metallic coatings on metallic and non-metallic basis materials Measurement of coating thickness Phase-sensitive eddycurrent method-First Edition |
|
ISO 2236 |
Assembly Tools for Screws and Nuts - Forged and Tubular Socket Wrenches - Maximum Outside Head Dimensions-Third Edition |
|
ISO 229 |
Machine Tools - Speeds and Feeds-First Edition |
|
ISO 234-2 |
Files and Rasps - Part 2: Characteristics of Cut-First Edition |
|
ISO 2351-2 |
Assembly Tools for Screws and Nuts - Machine-Operated Screwdriver Bits - Part 2: Screwdriver Bits for Cross-Recessed Head Screws-First Edition |
|
ISO 24034 |
Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification-First Edition |
|
ISO 241 |
Shanks for Turning and Planing Tools - Shapes and Dimensions of the Section-Second Edition |
|
ISO 242 |
Carbide Tips for Brazing on Turning Tools-First Edition |
|
ISO 243 |
Turning Tools with Carbide Tips - External Tools |
|
ISO 2540 |
Centre Drills for Centre Holes with Protecting Chamfer - Type B-First Edition |
|
ISO 2742 |
Vitreous and Porcelain Enamels - Determination of Resistance to Boiling Citric Acid-Third Edition |
|
ISO 3408-5 |
Ball screws Part 5: Static and dynamic axial load ratings and operational life-First Edition |
|
ISO 3690 |
Welding and Allied Processes - Determination of Hydrogen Content in Ferritic Steel Arc Weld Metal-Second Edition |
|
ISO 3860 |
Bore Cutters with Key Drive - Form Milling Cutters with Constant Profile First Edition |
|
ISO 504 |
Turning Tools with Carbide Tips - Designation and Marking-First Edition |
|
ISO 513 |
Classification and application of hard cutting materials for metal removal with defined cutting edges Designation of the main groups and groups of application-Third Edition; |
|
ISO 514 |
Turning Tools with Carbide Tips - Internal Tools-First Edition |
|
ISO 5170 |
Machine Tools - Lubrication Systems-First Edition |
|
ISO 5391 |
Pneumatic tools and machines Vocabulary |
|
ISO 5609 |
Boring Bars for Indexable Inserts - Dimensions-Fourth Edition |
|
ISO 5743 |
Pliers and nippers General technical requirements-Third Edition |
|
ISO 5822 |
Spot Welding Equipment - Taper Plug Gauges and Taper Ring Gauges Second Edition |
|
ISO 6104 |
Superabrasive products Rotating grinding tools with diamond or cubic boron nitride General survey, designation and multilingual nomenclature-Second Edition |
|
ISO 6155 |
Machine Tools - Test Conditions for Horizontal Spindle Turret and Single Spindle Automatic Lathes - Testing of the Accuracy-First Edition |
|
ISO 6158 |
Metallic coatings Electrodeposited coatings of chromium for engineering purposes-Second Edition |
|
ISO 6344-2 |
Coated Abrasives - Grain Size Analysis - Part 2: Determination of Grain Size Distribution of Macrogrits P12 to P220-First Edition |
|
ISO 636 |
Welding consumables Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels Classification-Third Edition |
|
ISO 6545 |
Acceptance Conditions for Gear Hobbing Machines - Testing of the Accuracy First Edition |
|
ISO 6806 |
Rubber Hoses and Hose Assemblies for Use in Oil Burners - Specification Second Edition; (CEN EN ISO 6806: 1995) |
|
ISO 6826 |
Reciprocating Internal Combustion Engines - Fire Protection-Second Edition |
|
ISO 7226 |
Hexagonal Dienuts Second Edition |
|
ISO 7289 |
Quick-Action Couplings with Shut-Off Valves for Gas Welding, Cutting and Allied Processes Second Edition |
|
ISO 7753 |
Nuclear Energy - Performance and Testing Requirements for Criticality Detection and Alarm Systems First Edition |