|
ISO 11125-7 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 7: Determination of Moisture First Edition |
|
ISO 11424 |
Rubber Hoses and Tubing for Air and Vacuum Systems for Internal- Combustion Engines - Specification First Edition |
|
ISO 12224-2 |
Flux Cored Solder Wire - Specification and Test Methods - Part 2: Determination of Flux Content-First Edition |
|
ISO 12803 |
Representative Sampling of Plutonium Nitrate Solutions for Determination of Plutonium Concentration-First Edition |
|
ISO 13256-2 |
Water-Source Heat Pumps - Testing and Rating for Performance - Part 2: Water-to-Water and Brine-to-Water Heat Pumps-First Edition |
|
ISO 13261-1 |
Sound Power Rating of Air-Conditioning and Air-Source Heat Pump Equipment - Part 1: Non-Ducted Outdoor Equipment-First Edition |
|
ISO 13465 |
Determination of Neptunium in Nitric Acid Solutions by Molecular Absorption Spectrophotometry-First Edition |
|
ISO 13602-2 |
Technical energy systems - Methods for analysis - Part 2: Weighting and aggregation of energywares-First Edition |
|
ISO 13774 |
Rubber and Plastics Hoses for Fuels for Internal-Combustion Engines - Method of Test for Flammability-First Edition |
|
ISO 14270 |
Specimen Dimensions and Procedure for Mechanized Peel Testing Resistance Spot, Seam and Embossed Projection Welds-First Edition |
|
ISO 14327 |
Resistance welding Procedures for determining the weldability lobe for resistance spot, projection and seam welding-First Edition |
|
ISO 14344 |
Welding and Allied Processes - Flux and Gas Shielded Electronical Welding Processes - Procurement Guidelines for Consumables-First Edition |
|
ISO 14744-6 |
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 6: Measurement of Stability of Spot Position-First Edition |
|
ISO 15012-1 |
Health and safety in welding and allied processes Requirements testing and marking of equipment for air filtration Part 1: Testing of the separation efficiency for welding fume-First Edition |
|
ISO 15387 |
Space systems Single-junction solar cells Measurement and calibration procedures-First edition |
|
ISO 15531-32 |
Industrial automation systems and integration Industrial manufacturing management data: Resources usage management Part 32: Conceptual model for resources usage management data-First Edition |
|
ISO 15531-43 |
Industrial automation systems and integration Industrial manufacturing management data Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange-First Edition |
|
ISO 15636 |
Back-up pads for vulcanized fibre discs-First Edition |
|
ISO 16241 |
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)-First Edition |
|
ISO 16463 |
Polycrystalline diamond inserts, tipped Dimensions, types-First Edition |
|
ISO 16793 |
Nuclear fuel technology Guide for ceramographic preparation of UO2 sintered pellets for microstructure examination-First Edition |
|
ISO 16915 |
Tools for moulding Sprue pullers-First Edition |
|
ISO 1701-2 |
Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy - Part 2: Machines with Horizontal Spindle-Second Edition; Replaces ISO 1701-0: 6/1/1984 and ISO 1701-3: 12/15/1997 |
|
ISO 1708 |
Acceptance Conditions for General Purpose Parallel Lathes - Testing of the Accuracy-Fourth Edition |
|
ISO 17641-1 |
Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 1: General-First Edition |
|
ISO 17654 |
Destructive Tests on Welds in Metallic Materials - Resistance Welding - Pressure Test on Resistance Seam Welds-First Edition |
|
ISO 18629-1 |
Industrial automation systems and integration Process specification language Part 1: Overview and basic principles-First Edition |
|
ISO 18629-11 |
Industrial automation systems and integration - Process specification language - Part 11: PSL core-First Edition |
|
ISO 18629-41 |
Industrial automation systems and integration Process specification language Part 41: Definitional extension: Activity extensions-First Edition |
|
ISO 18629-42 |
Industrial automation systems and integration Process specification language Part 42: Definitional extension: Temporal and state extensions-First Edition |
|
ISO 1984-2 |
Test Conditions for Manually Controlled Milling Machines with Table of Fixed Height - Testing of the Accuracy - Part 2: Machines with Vertical Spindle-First Edition; Together with ISO 1984-1:2001, Cancels and Replaces ISO 1984:1982 and ISO 1984-0:1984 |
|
ISO 21537-2 |
Clamping flanges for superabrasive cutting-off wheels Part 2: Building and construction-First Edition |
|
ISO 21948 |
Coated Abrasives - Plain Sheets-First Edition |
|
ISO 21950 |
Coated Abrasives - Plain Discs-First Edition |
|
ISO 22037 |
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials Dimensions-First Edition |
|
ISO 22829 |
Resistance welding Transformerrectifier for welding guns with integrated transformers Transformer-rectifier units operating at 1 000 Hz frequency-First edition |
|
ISO 2296 |
Metal Slitting Saws with Fine and Coarse Teeth - Metric Series-First Edition |
|
ISO 235 |
Parallel Shank Jobber and Stub Series Drills and Morse Taper Shank Drills-Second Edition; Amendment Slip-1981; Corrigendum 1-1996 |
|
ISO 2423 |
Acceptance Conditions for Radial Drilling Machines with the Arm Adjustable in Height - Testing of Accuracy-Second Edition |
|
ISO 2585 |
Slotting Cutters with Plain Bore and Key Drive - Metric Series-First Edition |
|
ISO 2891 |
Modular Units for Machine Tool Construction - Centre Bases and Columns Second Edition |
|
ISO 2912 |
Modular Units for Machine Tool Construction - Multi-Spindle Heads - Casing and Input Drive Shaft Dimensions-First Edition; Amendment 1: 1982 |
|
ISO 2934 |
Modular Units for Machine Tool Construction - Wing Base for Columns First Edition; (NZS 5220: 1974) |
|
ISO 3190 |
Test Conditions for Turret and Single Spindle Co-Ordinate Drilling Machines with Vertical Spindle - Testing of the Accuracy First Edition |
|
ISO 3211 |
Anodizing of Aluminium and Its Alloys - Assessment of Resistance of Anodic Oxide Coatings to Cracking by Deformation Second Edition |
|
ISO 3253 |
Gas Welding Equipment - Hose Connections for Equipment for Welding, Cutting and Allied Processes-Second Edition |
|
ISO 3366 |
Coated Abrasives - Abrasive Rolls-Second Edition |
|
ISO 3442-2 |
Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 2: Power-operated chucks with tongue and groove type jaws-First Edition; Replaces ISO 3442 and ISO 9401 |
|
ISO 3465 |
Hand Taper Pin Reamers First Edition |
|
ISO 3467 |
Machine Taper Pin Reamers with Morse Taper Shanks First Edition |
|
ISO 3476 |
Modular Units for Machine Tool Construction - Tenon Drive and Flanges for Mounting Multi-Spindle Heads First Edition |
|
ISO 3857-3 |
Compressors, Pneumatic Tools and Machines - Vocabulary - Part 3: Pneumatic Tools and Machines Second Edition |
|
ISO 3919 |
Coated Abrasives - Flap Wheels with Shafts-Fourth edition |
|
ISO 447 |
Machine Tools - Direction of Operation of Controls-Second Edition |
|
ISO 4528 |
Vitreous and Porcelain Enamel Finishes - Selection of Test Methods for Vitreous and Porcelain Enamelled Areas of Articles-First Edition |
|
ISO 4531-2 |
Vitreous and Porcelain Enamels - Release of Lead and Cadmium from Enamelled Ware in Contact with Food - Part 2: Permissible Limits-First Edition |
|
ISO 4543 |
Metallic and Other Non-Organic Coatings - General Rules for Corrosion Tests Applicable for Storage Conditions First Edition; (CEN EN ISO 4543: 1994) |
|
ISO 4875-2 |
Metal-cutting band saw blades Part 2: Characteristics and dimensions-Second Edition |
|
ISO 4875-3 |
Metal Cutting Band Saw Blades - Part 3: Characteristics Relating to Each Type of Blade-First Edition |
|
ISO 5171 |
Pressure Gauges Used in Welding, Cutting and Allied Processes Second Edition |
|
ISO 5413 |
Machine Tools - Positive Drive of Morse Tapers Second Edition |
|
ISO 5749 |
Pliers and nippers Diagonal cutting nippers Dimensions and test values-Third Edition |
|
ISO 603-10 CORR 1 |
Bonded Abrasive Products - Dimensions - Part 10: Stones for Honing and Superfinishings TECHNICAL CORRIGENDUM 1-First Edition |
|
ISO 603-14 |
Bonded Abrasive Products - Dimensions - Part 14: Grinding Wheels for Deburring and Fettling/Snagging on an Angle Grinder-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-13: 1999, ISO 603-15: 1999 and ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 |
|
ISO 603-7 |
Bonded Abrasive Products - Dimensions - Part 7: Grinding Wheels for Manually Guided Grinding-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-6: 1999 and ISO 603-8: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 |
|
ISO 6105-1 |
Blanks for superabrasive cutting-off wheels Part 1: Manually guided cutting-off in building and civil engineering-First Edition; Together with ISO 6105-2 Replaces ISO 6105:1988 |
|
ISO 6106 |
Abrasive products - Checking the grit size of superabrasives-Second edition |
|
ISO 6108 |
Double Equal Angle Cutters with Plain Bore and Key Drive First Edition |
|
ISO 6210-1 |
Cylinders for Robot Resistance Welding Guns - Part 1: General Requirements First Edition |
|
ISO 6370-2 |
Vitreous and Porcelain Enamels - Determination of the Resistance to Abrasion - Part 2: Loss in Mass After Sub-Surface Abrasion First Edition |
|
ISO 6481 |
Acceptance Conditions for Vertical Surface Type Broaching Machines - Testing of Accuracy First Edition |
|
ISO 6752 |
Round Punches with 60 Degrees Conical Head and Straight Shank First Edition |
|
ISO 6847 |
Welding Consumables - Deposition of a Weld Metal Pad for Chemical Analysis-Second Edition |
|
ISO 702-3 |
Machine tools Connecting dimensions of spindle noses and work holding chucks Part 3: Bayonet type-Second Edition |
|
ISO 7287 |
Graphical Symbols for Thermal Cutting Equipment |
|
ISO 7755-12 |
Hardmetal Burrs - Part 12: Inverted Cone Burrs (Style N) First Edition |
|
ISO 7755-2 |
Hardmetal Burrs - Part 2: Cylindrical Burrs (Style A) First Edition |
|
ISO 7755-4 |
Hardmetal Burrs - Part 4: Spherical Burrs (Style D) First Edition |
|
ISO 7755-5 |
Hardmetal Burrs - Part 5: Oval Burrs (Style E) First Edition |
|
ISO 7755-7 |
Hardmetal Burrs - Part 7: Arch Pointed-Nose Burrs (Style G) First Edition |
|
ISO 7759 |
Anodizing of Aluminium and Its Alloys - Measurement of Reflectivity Characteristics of Aluminium Surfaces Using Abridged Goniophotometer or Goniophotometer First Edition |
|
ISO 7931 |
Insulation Caps and Bushes for Resistance Welding Equipment First Edition |
|
ISO 8020 |
Tools for Pressing - Punches with Cylindrical Head and Straight or Reduced Shank-Third Edition |
|
ISO 8252 |
Anodized Aluminium and Aluminium Alloys - Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings with an Abrasive Jet Test Apparatus First Edition |
|
ISO 8298 |
Nuclear Fuel Technology - Determination of Milligram Amounts of Plutonium in Nitric Acid Solutions - Potentiometric Titration with Potassium Dichromate after Oxidation by Ce(IV) and Reduction by Fe(II)-Second Edition |
|
ISO 8373 |
Manipulating Industrial Robots - Vocabulary (CEN EN ISO 8373: 1996)-First Edition; Amendment 1: 1996; Corrigendum 1: 1996 |
|
ISO 8404 |
Tools for moulding Angle pins-Second Edition |
|
ISO 8405 |
Tools for Moulding - Ejector Sleeves with Cylindrical Head - Basic Series for General Purposes-Second Edition |
|
ISO 8425 |
Determination of Plutonium in Pure Plutonium Nitrate Solutions - Gravimetric Method First Edition |
|
ISO 865 |
Slots in Platens for Projection Welding Machines-First Edition |
|
ISO 8662-13 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 13: Die Grinders-First Edition; Technical Corrigendum 1-1998 |
|
ISO 8662-8 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 8: Polishers and Rotary, Orbital and Random Orbital Sanders-First Edition |
|
ISO 8662-9 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 6: Rammers First Edition |
|
ISO 8694 |
Tools for Moulding - Shouldered Ejector Pins-Second Edition |
|
ISO 9138 |
Abrasive Grains - Sampling and Splitting First Edition |
|
ISO 9182-3 |
Tools for Pressing - Guide Pillars - Part 3: Type B, End-Locking Pillars First Edition |
|
ISO 9220 |
Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method First Edition (CEN EN ISO 9220: 1994) |
|
ISO 9251 |
Thermal Insulation - Heat Transfer Conditions and Properties of Materials - Vocabulary First Edition (CEN EN ISO 9251: 1995) |
|
ISO 9270 |
7/24 Tapers for Tool Shanks for Automatic Changing - Tapers for Spindle Noses First Edition |
|
ISO 9312 |
Resistance Welding Equipment - Insulated Pins for Use in Electrode Back-ups First Edition; (EN ISO 9312 : 1994) |
|
ISO 9343 |
Pliers and nippers Slip joint pliers Dimensions and test values-Second Edition |
|
ISO 9455-16 |
Soft Soldering Fluxes - Test Methods - Part 16: Flux Efficacy Tests, Wetting Balance Method-First Edition |
|
ISO 9455-2 |
Soft Soldering Fluxes - Test Methods - Part 2: Determination of Non-Volatile Matter, Ebulliometric Method First Edition (CEN EN ISO 9455-2: 1995) |
|
ISO 9455-3 |
Soft Soldering Fluxes - Test Methods - Part 3: Determination of Acid Value, Potentiometric and Visual Titration Methods First Edition; (CEN EN ISO 9455-3: 1994) |
|
ISO 9455-9 |
Soft Soldering Fluxes - Test Methods - Part 9: Determination of Ammonia Content First Edition (CEN EN ISO 9455-9: 1995) |
|
ISO 9459-1 |
Solar Heating - Domestic Water Heating Systems - Part 1: Performance Rating Procedure Using Indoor Test Methods First Edition-AS/NZS 4445.1:1993 |
|
ISO 9459-2 |
Solar Heating - Domestic Water Heating Systems - Part 2: Outdoor Test Methods for System Performance Characterization and Yearly Performance Prediction of Solar-Only Systems First Edition |
|
ISO 9524 |
Machine Tools - Front Faces of Spindle Holders for Machining Centres - Functional Dimensions First Edition |
|
ISO 9606-5 |
Approval Testing of Welders - Fusion Welding - Part 5: Titanium and Titanium Alloys, Zirconium and Zirconium Alloys-First Edition |
|
ISO 9654 |
Pliers and nippers for electronics Single-purpose nippers Cutting nippers-Second Edition |
|
ISO 9894 |
Subsampling of Uranium Hexafluoride in the Liquid Phase First Edition |
|
ISO TR 13283 |
Industrial Automation - Time-Critical Communications Architectures - User Requirements and Network Management for Time-Critical Communications Systems-First Edition |
|
ISO TR 24857 |
Synthetic industrial diamond grit products Single-particle compressive failure strength DiaTest-SI system-First edition |
|
ISO TS 10303-304 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 304: Abstract Test Suite: Mechanical Design Using Boundary Representation-First Edition |
|
ISO TS 10303-324 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 324: Abstract Test Suite: Mechanical Product Definition for Process Plans Using Machining Features-First Edition |
|
ISO TS 10303-35 |
Industrial automation systems and integration Product data representation and exchange Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations-First Edition |
|
ISO 10051 |
Thermal Insulation - Moisture Effects on Heat Transfer - Determination of Thermal Transmissivity of a Moist Material First Edition |
|
ISO 10073 |
Tools for Moulding - Support Pillars First Edition |
|
ISO 10270 |
Corrosion of Metals and Alloys - Aqueous Corrosion Testing of Zirconium Alloys for Use in Nuclear Power Reactors-First Edition; Corrigendum 1 07-15-1997 |
|
ISO 10303-101 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 101: Intergrated Application Resources: Draughting-First Edition; Corrigendum 1: 04/15/1999 |
|
ISO 10303-105 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 105: Integrated Application Resource: Kinematics-First Edition; Technical Corrigendum 1:03/01/2000; Technical Corrigendum 2: 10/15/2000 |
|
ISO 10303-109 |
Industrial automation systems and integration Product data representation and exchange Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models-First Edition |
|
ISO 10303-202 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 202: Application Protocol: Associative Draughting-First Edition |
|
ISO 10303-47 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 47: Integrated Generic Resource: Shape Variation Tolerances-First Edition; Technical Corrigendum 1: 10/15/2000 |
|
ISO 10303-501 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 501: Application Interpreted Construct: Edge-Based Wireframe-First Edition |
|
ISO 10303-509 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 509: Application Interpreted Construct: Manifold Surface-First Edition |
|
ISO 10303-521 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 521: Application Interpreted Construct: Manifold Subsurface-First Edition |
|
ISO 10308 |
Metallic coatings Review of porosity tests-Second Edition |
|
ISO 1089 |
Electrode Taper Fits for Spot Welding Equipment - Dimensions-First Edition |
|
ISO 10898 |
Spot Drills First Edition (BS 328: Part 8: 1992) (NZS/BS 328: Pt 8: 1992) |
|
ISO 10980 |
Validation of the Strength of Reference Solutions Used for Measuring Concentrations First Edition |
|
ISO 11090-2 |
Machine Tools - Test Conditions for Die Sinking Electro-Discharge Machines (EDM) - Terminology and Testing of Accuracy - Part 2: Two Column Machines (Slide-Head Type and Cross-Slide Table Type)-First Edition |
|
ISO 11125-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 3: Determination of Hardness First Edition |
|
ISO 11125-5 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 5: Determination of Percentage Defective Particles and of Microstructure First Edition |
|
ISO 11415 |
Tools for Pressing - Die Sets-First Edition |
|
ISO 11482 |
Guidelines for Plutonium Dioxide (PuO2) Sampling in a Nuclear Reprocessing Plant First Edition |
|
ISO 11599 |
Determination of Gas Porosity and Gas Permeability of Hydraulic Binders Containing Embedded Radioactive Waste-First Edition |
|
ISO 11900-2 |
Tools for Pressing - Ball-Lock Punch Retainers - Part 2: Types C and D, Reduced for Light Duty-First Edition |
|
ISO 11901-2 |
Tools for pressing Gas springs Part 2: Specification of accessories-Second Edition |
|
ISO 12145 |
Resistance Welding Equipment - Angles for Mounting Spot Welding Electrodes-First Edition |
|
ISO 12165 |
Tools for Moulding - Components of Compression and Injection Moulds and Diecasting Dies - Terms and Symbols-First Edition |
|
ISO 12683 |
Mechanically deposited coatings of zinc Specification and test methods-First Edition |
|
ISO 12687 |
Metallic Coatings - Porosity Tests - Humid Sulfur (Flowers of Sulfur) Test-First Edition |
|
ISO 12800 |
Nuclear fuel technology Guide to the measurement of the specific surface area of uranium oxide powders by the BET method-First Edition |
|
ISO 13041-7 |
Test conditions for numerically controlled turning machines and turning centres Part 7: Evaluation of contouring performance in the coordinate planes-First Edition |
|
ISO 13041-8 |
Test conditions for numerically controlled turning machines and turning centres Part 8: Evaluation of thermal distortions-First Edition |
|
ISO 13253 |
Ducted Air-Conditioners and Air-to-Air Heat Pumps - Testing and Rating for Performance First Edition |
|
ISO 13805 |
Virtreous and Porcelain Enamels for Aluminium - Determination of the Adhesion of Enamels on Aluminium under the Action of Electrolytic Solution (Spall Test)-First Edition |
|
ISO 13806 |
Vitreous and Porcelain Enamels - Corrosion Tests in Closed Systems-First Edition |
|
ISO 14112 |
Gas Welding Equipment - Small Kits for Gas Brazing and Welding First Edition |
|
ISO 14314 |
Reciprocal internal combustion engines Recoil starting equipment General safety requirements-First Edition |
|
ISO 14341 |
Welding consumables Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification-First edition |
|
ISO 14744-2 |
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 2: Measurement of Accelerating Voltage Characteristics-First Edition |
|
ISO 14744-3 |
Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 3: Measurement of Beam Current Characteristics-First Edition |
|
ISO 14918 |
Thermal Spraying - Approval Testing of Thermal Sprayers-First Edition |
|
ISO 14921 |
Thermal Spraying - Procedures for the Application of Thermally Sprayed Coatings for Engineering Components-First Edition |
|
ISO 15531-42 |
Industrial automation systems and integration Industrial manufacturing management data Part 42: Time Model-First Edition |
|
ISO 15721 |
Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings by Sulfurous Acid/Sulfur Dioxide Vapour-First Edition |
|
ISO 16367 |
Tools for Pressing - Guide Plates - U- and V-Blocks-First Edition |
|
ISO 16795 |
Nuclear energy Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry-First Edition |
|
ISO 1709 |
Nuclear Energy - Fissile Materials - Principles of Criticality Safety in Storing, Handling and Processing-Second Edition |
|
ISO 17633 |
Welding consumables Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels Classification-First Edition |
|
ISO 17641-2 |
Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 2: Self-restraint tests-First Edition |
|
ISO 17652-1 |
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 1: General Requirements-First Edition |
|
ISO 17652-2 |
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 2: Welding Properties of Shop Primers-First Edition |
|
ISO 17836 |
Thermal spraying Determination of the deposition efficiency for thermal spraying-First Edition |
|
ISO 17846 |
Welding and allied processes Health and safety Wordless precautionary labels for equipment and consumables used in arc welding and cutting-First Edition |
|
ISO 17925 |
Zinc and/or aluminium based coatings on steel Determination of coating mass per unit area and chemical composition Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry-First Edition |
|
ISO 18629-12 |
Industrial automation systems and integration - Process specification language - Part 12: Outer core-First Edition |
|
ISO 18629-43 |
Industrial automation systems and integration Process specification language Part 43: Definitional extension: Activity ordering and duration extensions-First Edition |
|
ISO 19013-2 |
Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels-First Edition; Together with ISO 19013-1 Replaces ISO 4639-1: 1987, ISO 4639-2: 1995, ISO 4639-3: 1995 |
|
ISO 21537-1 |
Clamping flanges for superabrasive cutting-off wheels Part 1: Natural stone-First Edition |
|
ISO 21538 |
Blanks for superabrasive cutting-off wheels Mounting and fixing bores Building construction and civil engineering-First Edition |
|
ISO 2336-2 |
Hacksaw blades Part 2: Dimensions for machine blades-Second Edition |
|
ISO 23570-2 |
Industrial automation systems and integration Distributed installation in industrial applications Part 2: Hybrid communication bus-First Edition |
|
ISO 23570-3 |
Industrial automation systems and integration Distributed installation in industrial applications Part 3: Power distribution bus-First Edition |
|
ISO 2401 |
Covered Electrodes - Determination of the Efficiency, Metal Recovery and Deposition Coefficient-First Edition; CEN EN 22401: 1994 |
|
ISO 2407 |
Tests Conditions for Internal Cylindrical Grinding Machines with Horizontal Spindle - Testing of Accuracy-Third Edition |
|
ISO 2562 |
Modular Units for Machine Tool Construction - Slide Units-First Edition; Amendment 1-1982 |
|
ISO 2727 |
Modular Units for Machine Tool Construction - Headstocks First Edition; (NZS 5216: 1974) |
|
ISO 2772-1 |
Test Conditions for Box Type Vertical Drilling Machines - Testing of the Accuracy - Part I: Geometrical Tests First Edition |
|
ISO 3070-3 |
Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 3: Machines with movable column and movable table-Third Edition |
|
ISO 3210 |
Anodizing of Aluminium and Its Alloys - Assessment of Quality of Sealed Anodic Oxide Coatings by Measurement of the Loss of Mass After Immersion in Phosphoric-Chromic Acid Solution Second Edition |
|
ISO 3438 |
Subland Twist Drills with Morse Taper Shanks for Holes Prior to Tapping Screw Threads-Second Edition |
|
ISO 3580 |
Covered Electrodes for Manual Arc Welding of Welding consumables Covered electrodes for manual metal arc welding of creep-resisting steels Classification-Second Edition |
|
ISO 3937 |
Cutter Arbors with Tenon Drive - Dimensions Third Edition |
|
ISO 4205 |
Countersinks, 90 Degrees, with Parallel Shanks and Solid Pilots Second Edition; (BS 328: Part 6: 1992) (NZS/BS 328: Pt 6: 1992) |
|
ISO 4206 |
Counterbores with Parallel Shanks and Solid Pilots Second Edition (BS 328: Part 7: 1992) (NZS/BS 328: Pt 7: 1992) |
|
ISO 4248 |
Jig Bushes - Definitions and Nomenclature First Edition |
|
ISO 4530 |
Vitreous and Porcelain Enamelled Manufactured Articles - Determination of Resistance to Heat First Edition |
|
ISO 4535 |
Vitreous and Porcelain Enamels - Apparatus for Determination of Resistance to Hot Detergent Solutions Used for Washing Textiles First Edition |
|
ISO 4539 |
Electrodeposited Chromium Coatings - Electrolytic Corrosion Testing (EC Test) First Edition |
|
ISO 5182 |
Resistance welding Materials for electrodes and ancillary equipment-Third Edition |
|
ISO 5183-2 |
Resistance Spot Welding - Electrode Adaptors, Male Taper 1:10 - Part 2: Parallel Shank Fixing for End-Thrust Electrodes-Second Edition |
|
ISO 5184 |
Straight Resistance Spot Welding Electrodes First Edition; (CEN EN 25184: 1994) |
|
ISO 522 |
Special Tolerances for Reamers-First Edition |
|
ISO 5415 |
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw-Second Edition |
|
ISO 5429 |
Coated abrasives Flap wheels with incorporated flanges or separate flanges-Second edition |
|
ISO 5744 |
Pliers and nippers Methods of test-Third Edition |
|
ISO 603-11 |
Bonded Abrasive Products - Dimensions - Part 11: Hand Finishing Sticks-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-10: 1999 and ISO 603-12: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 |
|
ISO 603-16 |
Bonded Abrasive Products - Dimensions - Part 16: Grinding Wheels for Cutting-Off on Hand Held Power Tools-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-15: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 |
|
ISO 603-4 |
Bonded Abrasive Products - Dimensions - Part 4: Grinding Wheels for Surface Grinding/Peripheral Grinding-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-3: 1999 and ISO 603-5: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 |
|
ISO 603-9 |
Bonded Abrasive Products - Dimensions - Part 9: Grinding Wheels for High-Pressure Grinding-First Edition; Technical Corrigendum 1: 11-15-1999; Together with ISO 603-1: 1999 to ISO 603-8: 1999 and ISO 603-10: 1999 to ISO 603-16: 1999, Cancels and Replaces ISO/R 603: 1967, ISO 603-2: 1981, ISO 1117: 1975, ISO 2220: 1972, ISO 2933: 1974, ISO 3290: 1976, ISO 3920: 1976 and ISO 3921: 1976 |
|
ISO 6258 |
Nuclear Power Plants - Design Against Seismic Hazards First Edition |
|
ISO 6262-1 |
End Mills with Indexable Inserts - Part 1: End Mills with Flatted Parallel Shank First Edition |
|
ISO 6719 |
Anodized Aluminium and Aluminium Alloys - Measurement of Reflectance Characteristics of Aluminium Surfaces Using Integrating-Sphere Instruments First Edition |
|
ISO 6751 |
Tools for Moulding - Ejector Pins with Cylindrical Head-Third Edition |
|
ISO 6899 |
Acceptance Conditions of Open Front Mechanical Power Presses - Testing of the Accuracy First Edition |
|
ISO 7476 |
Nuclear fuel technology Determination of uranium in uranyl nitrate solutions of nuclear grade quality Gravimetric method-Second Edition |
|
ISO 7755-6 |
Hardmetal Burrs - Part 6: Arch Round- (Ball-) Nose Burrs (Style F) First Edition |
|
ISO 7755-8 |
Hardmetal Burrs - Part 8: Flame Burrs (Style H) First Edition |
|
ISO 7755-9 |
Hardmetal Burrs - Part 9: 60 Degrees and 90 Degrees Cone Burrs (Styles J and K) First Edition |
|
ISO 8205-1 |
Water-Cooled Secondary Connection Cables for Resistance Welding - Part 1: Dimensions and Requirements for Double-Conductor Connection Cables-Second Edition |
|
ISO 8406 |
Tools for Moulding - Mould Bases - Round Locating Elements and Spacers-Second Edition |
|
ISO 8430-2 |
Resistance Spot Welding - Electrode Holders - Part 2: Morse Taper Fixing First Edition |
|
ISO 8430-3 |
Resistance Spot Welding - Electrode Holders - Part 3: Parallel Shank Fixing for End Thrust-First Edition; Corrigendum 1: 1990 |
|
ISO 8486-1 |
Bonded Abrasives - Determination and Designation of Grain Size Distribution - Part 1: Macrogrits F4 F220 First Edition; |
|
ISO 8486-2 |
Bonded Abrasives - Determination and Designation of Grain Size Distribution - Part 2: Microgrits F230 to F1200 First Edition; |
|
ISO 8526-2 |
Modular Units for Machine Tools - Workholding Pallets - Part 2: Workholding Pallets of Nominal Size Greater Than 800 mm-First Edition; Corrigendum 1: 1992 |
|
ISO 8636-2 |
Machine tools Test conditions for bridge-type milling machines Testing of the accuracy Part 2: Travelling bridge (gantry-type) machines-Second Edition |
|
ISO 8662-10 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 10: Nibblers and Shears-First Edition |
|
ISO 8977 |
Tools for Pressing - Matrixes-Second Edition |
|
ISO 9059 |
Solar Energy - Calibration of Field Pyrheliometers by Comparison to a Reference Pyrheliometer First Edition |
|
ISO 9136-2 |
Abrasive Grains - Determination of Bulk Density - Part 2: Microgrits-First Edition |
|
ISO 9137 |
Abrasive Grains - Determination of Capillarity First Edition |
|
ISO 9182-4 |
Tools for Pressing - Guide Pillars - Part 4: Type C, Pillars with Taper Lead and Bush First Edition |
|
ISO 9183-1 |
Tools for Pressing - Wear Plates for Press Dies - Part 1: Type A First Edition |
|
ISO 9183-2 |
Tools for Pressing - Wear Plates for Press Dies - Part 2: Type B First Edition |
|
ISO 9188 |
Machine Tools - Straight-Sided Single-Action Mechanical Power Presses from 400 kN up to and Including 4 000 kN Nominal Force - Characteristics and Dimensions First Edition |
|
ISO 9189 |
Machine Tools - Straight-Sided High-Speed Mechanical Power Presses from 250 kN up to and Including 4 000 kN Nominal Force - Characteristics and Dimensions First Edition |
|
ISO 9448-10 |
Tools for Pressing - Guide Bushes - Part 10: Form E, Gliding Bushes, Flanged, Type 2 First Edition |
|
ISO 9455-1 |
Soft Soldering Fluxes - Test Methods - Part 1: Determination of Non- Volatile Matter, Gravimetric Method First Edition (CEN EN 29455-1: 1993) |
|
ISO 9455-10 |
Soft Soldering Fluxes - Test Methods - Part 10: Flux Efficancy Tests, Solder Spread Method-First Edition |
|
ISO 9455-11 |
Soft Soldering Fluxes - Test Methods - Part 11: Solubility of Flux Residues First Edition (CEN EN 29455-11: 1993) |
|
ISO 9455-15 |
Soft Soldering Fluxes - Test Methods - Part 15: Copper Corrosion Test First Edition |
|
ISO 9455-6 |
Soft Soldering Fluxes - Test Methods - Part 6: Determination and Detection of Halide (Excluding Fluoride) Content First Edition |
|
ISO 9455-8 |
Soft Soldering Fluxes - Test Methods - Part 8: Determination of Zinc Content First Edition (CEN EN 29455-8: 1993) |
|
ISO 9459-5 |
Solar heating Domestic water heating systems Part 5: System performance characterization by means of whole-system tests and computer simulation-First Edition |
|
ISO 9553 |
Solar Energy - Methods of Testing Preformed Rubber Seals and Sealing Compounds Used in Collectors-First Edition |
|
ISO 9606-3 |
Approval Testing of Welders - Fusion Welding - Part 3: Copper and Copper Alloys-First Edition |
|
ISO 9606-4 |
Approval Testing of Welders - Fusion Welding - Part 4: Nickel and Nickel Alloys-First Edition |
|
ISO 9655 |
Pliers and nippers for electronics Single-purpose pliers Pliers for gripping and manipulating-Second Edition |
|
ISO 9787 |
Manipulating Industrial Robots - Coordinate Systems and Motion Nomenclatures-Second Edition |
|
ISO 9946 |
Manipulating Industrial Robots - Presentation of Characteristics-Second Edition |
|
ISO DIS 10303-240 |
Industrial automation systems and integration Product data representation and exchange Part 240: Application protocol: Process plans for machined products-2003 |
|
ISO TR 10303-307 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 307: Abstract Test Suite: Sheet Metal Die Planning and Design-First Edition |
|
ISO TR 10314-1 |
Industrial Automation - Shop Floor Production - Part 1: Reference Model for Standardization and a Methodology for Identification of Requirements First Edition |
|
ISO TR 11065 |
Industrial Automation Glossary First Edition |
|
ISO TR 8125 |
Anodizing of Aluminium and Its Alloys - Determination of Colour and Colour Difference of Coloured Anodic Coatings First Edition |
|
ISO TR 9901 |
Solar Energy - Field Pyranometers - Recommended Practice for Use First Edition |
|
ISO TS 10303-1003 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1003: Application Module: Curve Appearance-First Edition |
|
ISO TS 10303-1008 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 1008: Application Module: Layer Assignment-First Edition |
|
ISO 10071-2 |
Tools for Pressing - Ball-Lock Punches - Part 2: Ball-lock punches for heavy duty-First Edition |
|
ISO 10242-3 |
Tools for Pressing - Punch Holder Shanks - Part 3: Type D First Edition |
|
ISO 10303-207 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 207: Application Protocol: Sheet Metal Die Planning and Design-First Edition; Technical Corrigendum 1: 03-01-2001 |
|
ISO 10303-225 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 225: Application Protocol: Building Elements Using Explicit Shape Representation-First Edition |
|
ISO 10303-43 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 43: Integrated Generic Resources: Representation Structures-Technical Corrigendum 2 04/01/2000 |
|
ISO 10303-49 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 49: Integrated Generic Resources: Process Structure and Properties-First Edition |
|
ISO 10303-502 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 502: Application Interpreted Construct: Shell-Based Wireframe-First Edition |
|
ISO 10303-503 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 503: Application Interpreted Construct: Geometrically Bounded 2D Wireframe-First Edition; Technical Corrigendum 1: 12/1/2006 |
|
ISO 10303-510 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 510: Application Interpreted Construct: Geometrically Bounded Wireframe-First Edition |
|
ISO 10303-513 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 513: Application Interpreted Construct: Elementry Boundary Representation-First Edition |
|
ISO 10303-517 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 517: Application Interpreted Construct: Mechanical Design Geometric Presentation-First Edition; Corrigendum 1: 02/01/2002 |
|
ISO 10303-518 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 518: Application Interpreted Construct: Mechanical Design Shaded Presentation-First Edition |
|
ISO 10303-520 |
Industrial Automation Systems and Integration - Product Data Representation and Exchange - Part 520: Application Interpreted Construct: Associative Draughting Elements-First Edition |
|
ISO 10303-523 |
Industrial automation systems and integration Product data representation and exchange Part 523: Application interpreted construct: Curve swept solid-First Edition |
|
ISO 10645 |
Nuclear Energy - Light Water Reactors - Calculation of the Decay Heat Power in Nuclear Fuels First Edition |
|
ISO 1080 |
Machine Tools - Morse Taper Shanks - Cotter Slots with Taper Keys-First Edition |
|
ISO 10889-1 |
Tool Holders with Cylindrical Shank - Part 1: Cylindrical Shank, Location Bore - Technical Delivery Conditions-Second Edition |
|
ISO 10889-3 |
Tool Holders with Cylindrical Shank - Part 3: Type B with Rectangular Radial Seat-Second Edition |
|
ISO 10889-4 |
Tool Holders with Cylindrical Shank - Part 4: Type C with Rectangular Axial Seat-Second Edition |
|
ISO 10889-5 |
Tool Holders with Cylindrical Shank - Part 5: Type D, with More Than One Rectangular Seat-First Edition |
|
ISO 11125-1 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 1: Sampling First Edition |
|
ISO 11125-4 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 4: Determination of Apparent Density First Edition |
|
ISO 11900-3 |
Tools for pressing Ball-lock punch retainers Part 3: Type E, reduced for heavy duty-First Edition |
|
ISO 13041-6 |
Test conditions for numerically controlled turning machines and turning centres Part 6: Accuracy of a finished test piece-First edition |
|
ISO 13256-1 |
Water-Source Heat Pumps - Testing and Rating for Performance - Part 1: Water-to-Air and Brine-to-Air Heat Pumps-First Edition |
|
ISO 13281-2 |
Industrial Automation Systems and Integration - Manufacturing Automation Programming Environment (MAPLE) - Part 2: Services and Interfaces-First Edition |
|
ISO 13463 |
Nuclear-Grade Plutonium Dioxide Powder for Fabrication of Light Water Reactor MOX Fuel - Guidelines to Help in the Definition of a Product Specification-First Edition |
|
ISO 13464 |
Simultaneous Determination of Uranium and Plutonium in Dissolver Solutions from Reprocessing Plants - Combined Method Using K-Absorption Edge and X-ray Fluorescence Spectrometry-First Edition |
|
ISO 13584-20 |
Industrial Automation Systems and Integration - Parts Library - Part 20: Logical Resource: Logical Model of Expressions-First Edition |
|
ISO 13600 |
Technical Energy Systems - Basic Concepts-First Edition; Technical Corrigendum 1-1998 |
|
ISO 13601 |
Technical Energy Systems - Structure for Analysis - Energyware Supply and Demand Sectors-First Edition |
|
ISO 13602-1 |
Technical Energy System - Methods for Analysis - Part 1: General-First Edition |
|
ISO 13807 |
Vitreous and Porcelain Enamels - Determination of Crack Formation Temperature in the Thermal Shock Testing of Enamels for the Chemical Industry-First Edition; Technical Corrigendum 1: 10/15/2000 |
|
ISO 14258 |
Industrial Automation Systems - Concepts and Rules for Enterprise Models-First Edition; Technical Corrigendum 1: 02-15-2000 |
|
ISO 14554-1 |
Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 1: Comprehensive Quality Requirements-First Edition |
|
ISO 14922-1 |
Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 1: Guidance for Selection and Use-First Edition |
|
ISO 14923 |
Thermal spraying Characterization and testing of thermally sprayed coatings-First Edition |
|
ISO 15615 |
Gas Welding Equipment - Acetylene Manifold Systems for Welding, Cutting and Allied Processes - Safety Requirements in High-Pressure Devices-First Edition |
|
ISO 15635 |
Coated Abrasives - Flap Discs-First Edition |
|
ISO 15647 |
Nuclear energy Isotopic analysis of uranium hexafluoride Double-standard gas-source mass spectrometric method-First Edition |
|
ISO 15720 |
Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography-First Edition |
|
ISO 16366 |
Tools for Pressing - L-Shaped Guides-First Edition |
|
ISO 16916 |
Tools for moulding Tool specification sheet for injection moulds-First Edition |
|
ISO 17657-2 |
Resistance welding Welding current measurement for resistance welding Part 2: Welding current meter with current sensing coil-First Edition |
|
ISO 17657-3 |
Resistance welding Welding current measurement for resistance welding Part 3: Current sensing coil-First Edition |
|
ISO 17657-5 |
Resistance welding Welding current measurement for resistance welding Part 5: Verification of welding current measuring system-First Edition |
|
ISO 1929 |
Abrasive Belts - Dimensions, Tolerances and Designation-Second Edition |
|
ISO 1984-1 |
Test Conditions for Manually Controlled Milling Machines with Table of Fixed Height - Testing of the Accuracy - Part 1: Machines with Horizontal Spindle-First Edition; Together with ISO 1984-2:2001, Cancels and Replaces ISO 1984:1982 and ISO 1984-0:1984 |