|
JSA JIS R 1630 |
Test methods for tensile strength of fine ceramic joint |
|
JSA JIS R 2502 |
Testing Method for Grain Size of Refractory Mortar |
|
JSA JIS R 2554 |
Method of Test for Permanent Linear Change on Castable Refractories |
|
JSA JIS R 3213 |
Safety Glass for Railway Rolling Stock |
|
JSA JIS R 3220 |
Glass Mirror, Unworked |
|
JSA JIS R 3221 |
Solar Reflective Glass-FGMAJ |
|
JSA JIS R 5203 |
Testing Method for Heat of Hydration of Cement |
|
JSA JIS R 5211 |
Portland blast-furnace slag cement-(JCA) |
|
JSA JIS R 5212 |
Portland pozzolan cement |
|
JSA JIS R 6130 |
Testing method for bulk density of artificial abrasives-AAIA |
|
JSA JIS S 1031 |
Office Furniture - Desks and Tables-JOIFA; Errata 02/2006 |
|
JSA JIS S 2092 |
General Constructions of Gas Burning Appliances for Domestic Use |
|
JSA JIS S 2103 |
Gas Burning Cooking Appliances for Domestic Use |
|
JSA JIS S 2130 |
Gas Burning Clothes Dryers for Domestic Use |
|
JSA JIS S 2306 |
Method of Fragment Retention Test for Carbonated Beverage Bottles |
|
JSA JIS S 3200-1 |
Equipment for Water Supply Service - Test Methods of Hydrostatic Pressure |
|
JSA JIS S 3200-6 |
Equipment for Water Supply Service - Test Methods of Durability |
|
JSA JIS S 4001 |
Safety Match |
|
JSA JIS S 4100 AMD 1 |
Disposable Body Warmers |
|
JSA JIS T 0101 |
Glossary of Terms Used in Prosthetics and Orthotics |
|
JSA JIS T 0102 |
Glossary of Terms Used in Rehabilitation Equipments for the Physically Disabled or Handicapped Persons |
|
JSA JIS T 0111-1 |
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 1: Test Configurations-(ISO 10328-1:1996) |
|
JSA JIS T 0111-2 |
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 2: Test Samples-(ISO 10328-2:1996) |
|
JSA JIS T 0111-6 |
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 6: Loading Parameters of Supplementary Structural Tests-(ISO 10328-6:1996) |
|
JSA JIS T 0111-8 |
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 8: Test Report-(ISO 10328-8:1996) |
|
JSA JIS T 0601-2-203 |
Medical electrical equipment - Particular requirements for the safety of infrared therapy equipment-JIPT |
|
JSA JIS T 3201 |
Glass Syringes |
|
JSA JIS T 3209 |
Sterile injection needle-JMED |
|
JSA JIS T 3214 |
Urethral catheters-JMED |
|
JSA JIS T 3219 |
Sterile infusion filter-JMED |
|
JSA JIS T 3220 |
Sterile blood collection needle-JMED |
|
JSA JIS T 3222 |
Sterile winged intravenous devices-JMED |
|
JSA JIS T 3226-2 |
Pen-injectors for medical use - Part 2: Needles - Requirements and test methods-ERRATA:September 2006; JMED |
|
JSA JIS T 5109 |
Electric Dental Engines |
|
JSA JIS T 5204 |
Dental Mandrels |
|
JSA JIS T 5206 |
Dental Broaches |
|
JSA JIS T 5209 |
Dental Carborundum Wheels |
|
JSA JIS T 5408 |
Dental Bone Files |
|
JSA JIS T 5415 |
Gingival Applicators |
|
JSA JIS T 5901 |
Dimension for dental handpiece-JDMMA |
|
JSA JIS T 6109 |
Alloys for Dental Amalgam |
|
JSA JIS T 6114 |
Plus Metals for Dental Casting 14K Gold Alloys |
|
JSA JIS T 6505 |
Dental Alginate Impression Material |
|
JSA JIS T 6506 |
Acrylic Resin Teeth |
|
JSA JIS T 6511 |
Porcelain Denture Teeth |
|
JSA JIS T 6513 |
Dental Elastomeric Impression Materials-JDMA |
|
JSA JIS T 7202 |
Oxygen Tents |
|
JSA JIS T 7204 |
Lung Ventilators for Medical Use |
|
JSA JIS T 7316 |
Slit-Lamp Microscopes |
|
JSA JIS T 7402-2 |
Cobalt based alloys for surgical implant applications - part 2: Wrought cobalt-chromium-molybdenum alloy-JSB |
|
JSA JIS T 7402-3 |
Cobalt based alloys for surgical implant applications - part 2: Wrought cobalt-chromium-tungsten-nickel alloy-JSB |
|
JSA JIS T 8151 |
Particlate Respirators |
|
JSA JIS T 9111-1 |
Rubber Condoms- Part 1: Requirements |
|
JSA JIS T 9111-2 |
Rubber Condoms- Part 2: Determination of Length-ISO 4074-2 : 1994 |
|
JSA JIS T 9111-7 |
Rubber Condoms- Part 7: Oven Conditioning-ISO 4074-7 : 1996 |
|
JSA JIS T 9112 |
Feeding Bottles |
|
JSA JIS T 9212 |
Artificial Feet and Ankle Joints |
|
JSA JIS T 9213 |
Artificial Knees |
|
JSA JIS T 9214 |
Metallic Ankle Joints for Lower Extremity Orthoses |
|
JSA JIS T 9215 |
Stirrups for Lower Extremity Othoses |
|
JSA JIS T 9217 |
Voluntary Opening Hooks |
|
JSA JIS T 9218 |
Voluntary Opening Hands |
|
JSA JIS T 9231 |
Urine Collection Systems |
|
JSA JIS T 9253 |
Performance and Test Method of Ultraviolet Ray Hardening Resinous Braille-JSPA |
|
JSA JIS X 6313 |
Prepaid Cards - Shopping Use - Magnetic Recording Characteristics and Information Interchange Edition 1 |
|
JSA JIS X 6910 |
Information technology - Office equipment - Copying machines and Multi-function devices - Information to be included in specification sheets and related test methods-JBMIA |
|
JSA JIS Z 0108 |
Glossary of Terms for Packaging-(JPI/JSA) |
|
JSA JIS Z 0239 |
Kraft Paper Sacks - Method of Specification-(JKPSA/JSA) |
|
JSA JIS Z 0311 |
Metallic Blast-Cleaning Abrasives-JACC |
|
JSA JIS Z 0313 |
Tests and Assessment of Abrasive Blast-Cleaned Substrates Before Application of Paints-JACC |
|
JSA JIS Z 1403 |
Wooden Framed Boxes for Packing-APA |
|
JSA JIS Z 1509 |
Kraft Paper Sacks for Potato Starch-JKPSA |
|
JSA JIS Z 2340 |
Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing-JSNDI |
|
JSA JIS Z 2507 |
Sintered Metal Bearing - Determination of Radial Crushing Strength |
|
JSA JIS Z 8051 |
Safety aspects - Guidelines for their inclusion in standards-ISO/IEC Guide 51: 1999 |
|
JSA JIS Z 8101-2 |
Statistics - Vocabulary and Symbols - Part 2: Statistical Quality Control Terms-Replaces JIS 8101 |
|
JSA JIS Z 8110 |
Colour Specification- Names of Light-source Colour |
|
JSA JIS Z 8123 |
Graphic Arts - Glossary - Fundamental Terms |
|
JSA JIS Z 8125 |
Graphic arts - Glossary - Digital printing terms-JFPI |
|
JSA JIS Z 8315-1 |
Technical Drawings - Projection Methods - Part 1: Synopsis-ISO 5456-1:1996 |
|
JSA JIS Z 8315-3 |
Technical Drawings - Projection Methods - Part 3: Axonometric Representations-ISO 5456-3:1996 |
|
JSA JIS Z 8318 |
Technical Drawings - Tolerancing of Linear and Angular Dimensions-ISO 406:1987 |
|
JSA JIS Z 8322 |
Technical drawings - General principles of presentation - Basic conventions and applications for leader lines and reference lines |
|
JSA JIS Z 8502 |
Ergonomic Principles Related to Mental Work-Load - General Terms and Definitions |
|
JSA JIS Z 8715 |
Whiteness of Near-White Opaque Materials - Specifying Method |
|
JSA JIS Z 8721 |
Colour Specification - Specification According to Their Three Attributes-Errata February 1998 |
|
JSA JIS Z 8725 |
Methods for Determining Distribution Temperature and Colour Temperature or Correlated Colour Temperature of Light Sources |
|
JSA JIS Z 8808 |
Methods of Measuring Dust Concentration in Flue Gas-Errata May, 1998 |
|
JSA JIS Z 8814 |
Low Volume Air Sampler |
|
JSA JIS Z 8820-2 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method-APPIE |
|
JSA JIS Z 8822 |
Determination of Particle Size Distribution by the Weight of Sedimentation in Liquid |
|
JSA JIS Z 8830 |
Determination of the Specific Surface Area of Powders by Gas Adsorption Methods |
|
JSA JIS Z 9041-4 |
Statistical Interpretation of Data - Part 4: Power of Tests Relating to Means and Variances-ISO 3494: 1976 |
|
JSA JIS Z 9103 |
Safety Colours - General Specification |
|
JSA JIS Z 9204 |
General Rules for Energy Evaluation Method by Available Energy |
|
JSA JIS A 0151 |
Symbols for Windows and Doors |
|
JSA JIS A 1102 |
Method of Test for Sieve Analysis of Aggregates |
|
JSA JIS A 1105 |
Method of Test for Organic Impurities in Fine Aggregate |
|
JSA JIS A 1107 |
Method of Obtaining and Testing Drilled Cores and Sawed Beams of Concrete |
|
JSA JIS A 1118 |
Method of Test for Air Content of Fresh Concrete by Volumetric Method |
|
JSA JIS A 1121 |
Method of Test for Abrasion of Coarse Aggregates by Use of the Los Angeles Machine |
|
JSA JIS A 1126 |
Method of Test for Soft Particles in Coarse Aggregates by Use of Scratch Tester |
|
JSA JIS A 1136 |
Method of Test for Compressive Strength of Spun Concrete |
|
JSA JIS A 1156 |
Method of measurement for temperature of fresh concrete-JCI |
|
JSA JIS A 1162 |
Testing methods for volume change of cellular concrete |
|
JSA JIS A 1201 |
Practice for Preparing Disturbed Soil Samples for Soil Testing |
|
JSA JIS A 1215 |
Method of Plate Load Test on Soils for Road |
|
JSA JIS A 1216 |
Method for Unconfined Compression Test of Soils |
|
JSA JIS A 1220 |
Method of Dutch Double-Tube Cone Penetration Test |
|
JSA JIS A 1302 |
Method of Fire Test for Noncombustible Structural Parts of Buildings |
|
JSA JIS A 1313 |
Inspection Standard of Rolling Fire Doors-JSDA |
|
JSA JIS A 1408 |
Test Methods of Bending and Impact for Building Boards-Errata June 2005 |
|
JSA JIS A 1414 |
Methods of Performance Test of Panels for Building Construction |
|
JSA JIS A 1435 |
Test Methods for Frost Resistance of Exterior Wall Materials of Buildings (Freezing and Thawing Method) |
|
JSA JIS A 1470-1 |
Test method of adsorption/desorption effciency for building materials to regulate an indoor humidity - Part 1: Response methods of humidity-JTCCM/JSA |
|
JSA JIS A 1522 |
Windows and Doorsets - Mechanical Deformation Test of Edge Rail |
|
JSA JIS A 1801 |
Methods of Test for Production Control of Concrete (Method of Test for Sand Equivalent Value of Fine Aggregates for Concrete) |
|
JSA JIS A 1902-4 |
Determination of the emission of volatile organic compounds and aldehydes for building products - Sampling, preparation of test specimens and testing condition - Part 4: Heat-Insulating material boards |
|
JSA JIS A 4002 |
Floor Drain with Traps |
|
JSA JIS A 4009 |
Components of Air Duct |
|
JSA JIS A 4101 |
Construction Parts of Glassfiber Reinforced Plastic Water Closet Wastes Disposal Plant |
|
JSA JIS A 4419 |
Prefabricative Pans for Bathrooms |
|
JSA JIS A 4902 |
Fireproof Metal AMADO for Dwellings |
|
JSA JIS A 5015 |
Iron and Steel Slag for Road Construction |
|
JSA JIS A 5032 |
Melt-solidified slag material for road construction derived from municipal solid waste and sewage sludge |
|
JSA JIS A 5207 |
Sanitary Wares-Replaces JIS A 5514 |
|
JSA JIS A 5390 |
Plastics Spacers for Precast Concrete |
|
JSA JIS A 5426 |
Flat Sandwich Boards in Asbestos Cement Sheets-Wood-Wool Cement Boards |
|
JSA JIS A 5451 |
Rock Wool Sheathing Boards |
|
JSA JIS A 5505 |
Metal Lath |
|
JSA JIS A 5506 |
Manhole Covers for Sewerage |
|
JSA JIS A 5522 |
Roof Drains |
|
JSA JIS A 5528 |
Hot Rolled Steel Sheet Piles-JISF |
|
JSA JIS A 5721 |
Plastic Floor Parts |
|
JSA JIS A 5752 |
Putty for Metal Sash Glazing |
|
JSA JIS A 6111 |
House wrapping sheets-FECMI |
|
JSA JIS A 6506 |
Building Components (Wood Panel for Floor) |
|
JSA JIS A 6508 |
Building Components (Concrete Panel for Roof) |
|
JSA JIS A 6517 |
Steel Furrings for Wall and Ceiling in Buildings |
|
JSA JIS A 6604 |
Metal Components for Car Port-First Edition |
|
JSA JIS A 6914 |
Jointing Materials for Gypsum Plasterboards |
|
JSA JIS A 6921 |
Wallpaper and Wallcoverings for Decorative Finish-WACOA/JSA |
|
JSA JIS A 8302 |
Construction Machinery - Access Systems |
|
JSA JIS A 8330-1 |
Earth-moving machinery - Operator enclosure environment - Part 1: General and definitions-ISO 10263-1: 1994;JCMA |
|
JSA JIS A 8330-4 |
Earth-moving machinery - Operator enclosure environment - Part 4: Operator enclosure ventilation, heating and/or air conditioning test method-ISO 10263-4: 1994; JCMA |
|
JSA JIS A 8347 |
Earth-moving machinery - Preservation and storage-ISO 6749: 1984 |
|
JSA JIS A 8501 |
Standard Form of Specifications of Diesel Pile Hammers |
|
JSA JIS A 8603 |
Forced Mixing Type Mixers |
|
JSA JIS A 8611 |
Building Construction Machinery and Equipment - External Vibrators for Concrete-JCMA |
|
JSA JIS A 8652 |
Metal Panels for Concrete Form |
|
JSA JIS A 8915 |
Earth-Moving Machinery- Method for Locating the Centre of Gravity |
|
JSA JIS B 0031 |
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation-ISO 1302: 2002 |
|
JSA JIS B 0139 |
Graphic Symbols for Copying Machines |
|
JSA JIS B 0191 |
Glossary of Terms Relating to Word Processor for Japanese Characters |
|
JSA JIS B 7132 |
Biological Microscopes for Immersion Objectives |
|
JSA JIS B 7203 |
16 mm Motion Picture Projector Alignment Test Films |
|
JSA JIS B 7282 |
Spectacle Frames - Marking |
|
JSA JIS B 7283 |
Method of Endurance Test Under Cyclic Load for Spectacle Frame |
|
JSA JIS B 7953 |
Continuous Analysers for Oxides of Nitrogen in Ambient Air |
|
JSA JIS B 7984 |
Continuous Analyzer for Hydrogen Chloride in Flue Gas-JEMIMA |
|
JSA JIS B 7988 |
Continuous analyzers for dinitrogen monoxide in flue gas |
|
JSA JIS B 8392-1 |
Compressed Air - Part 1: Contaminants and Purity Classes-JFPA; ISO 8573-1:2001 |
|
JSA JIS B 8941 |
Automated Storage and Retrieval System - Vocabulary |
|
JSA JIS B 9121 |
Cocks for Sprayer |
|
JSA JIS B 9209 |
Dimensions of Hitch for Walking Tractors |
|
JSA JIS B 9218 |
Standard Form of Specifications of Head- Feeding Type Combines |
|
JSA JIS B 9220 |
General Code of Safety for Agricultural Machinery (PNS 606:1991) |
|
JSA JIS B 9223 |
Format of Specification for Agricultural Walking Tractors |
|
JSA JIS B 9510 |
Format of Specification for Electronic Cash Registers |
|
JSA JIS B 9651 |
Design Rules for Safety and Sanitation of Baking Machinery |
|
JSA JIS B 9655 |
Design Rules for Safety and Sanitation of Processing Machinery Used in Flouring Mill |
|
JSA JIS B 9704-1 |
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests-JMF; IEC 61496-1:2004 |
|
JSA JIS B 9706-3 |
Safety of Machinery - Indication, Making and Actuation - Part 3: Requirements for the Location and Operation of Actuators-IEC 61310-3:1999 |
|
JSA JIS B 9925 |
Light Scattering Automatic Particle Counter for Liquid |
|
JSA JIS C 0452-2 |
Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 2: Classification of objects and codes for classes-IEC 61346-2:2000 |
|
JSA JIS C 3801-2 |
Testing method for insulators - Part 2: Post insulators for station |
|
JSA JIS C 3810 |
Normal Type and Anti-Pollution Type Suspension Insulators |
|
JSA JIS C 3812 |
Line Post Insulators |
|
JSA JIS C 5070 |
Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide-JEITA |
|
JSA JIS C 60068-2-47 |
Environmental Testing - Part 2-47: Test Methods - Mounting of Components, Equipment and Other Articles for Vibration, Impact and Similar Dynamic Tests-IEC 60068-2-47:1999 |
|
JSA JIS C 60068-2-66 |
Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)-IEC 60068-2-66: 1994; RCJ; Renumbers JIS C 0096: 2001 |
|
JSA JIS C 60068-2-67 |
Environmental testing - Part 2: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components-IEC 60068-2-67: 1995; RCJ; Renumbers JIS C 0097 |
|
JSA JIS C 60068-2-68 |
Environmental testing - Electrotechnical products - Dust and sand test-IEC 60068-2-68:1994; RCJ; Renumbers JIS C 0098 |
|
JSA JIS C 60068-2-78 |
Environmental Testing - Part 2-78: Tests - Test Cab: Damp Heat, Steady State-(IEC 60068-2-78) |
|
JSA JIS C 7523 |
Small Lamps for Household Use-JELMA |
|
JSA JIS C 7525 |
Reflector Incandescent Lamps |
|
JSA JIS C 7528 |
Traffic Signal Lamps |
|
JSA JIS C 7601 |
Fluorescent Lamps for General Lighting Service-Errata February, 1998 |
|
JSA JIS C 7605 |
Low Pressure Mercury Germicidal Discharge Lamps-Edition 1 |
|
JSA JIS C 7607 |
Total Luminous Flux Measurements on Discharge Lamps Used for Photometric Standards |
|
JSA JIS C 7612 |
Illuminance Measurements for Lighting Installations |
|
JSA JIS C 8108 |
Ballasts for Fluorescent Lamps-Errata-1994 |
|
JSA JIS C 9210 AMD 1 |
Electrically Heated Blankets |
|
JSA JIS C 9335-2-24 |
Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Refrigerating Appliances and Ice-Makers |
|
JSA JIS C 9608 |
Tumbler Type Electric Clothes Dryers |
|
JSA JIS D 0105 |
Glossary of Terms for Cargo Type Rear Body of Motor Trucks |
|
JSA JIS D 0108 |
Glossary of Terms Relating to Control of Air Pollutions from Automobile Emissions |
|
JSA JIS D 0117-1 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components-ISO 11841-2:2000; JAPIA |
|
JSA JIS D 0301 |
Measuring Method of Automobile Body Interior Dimensions Edition 1; (Errata - June 1996) |
|
JSA JIS D 1018 |
Long Hill Climbing Test Method of Automobiles |
|
JSA JIS D 1020 |
Sand Ground Test Method of Automobiles |
|
JSA JIS D 1025 |
Minimum Turning Radius Test Procedure of Automobiles |
|
JSA JIS D 1028 |
Measuring Method of Carbon Monoxide in Automobile Exhaust Gas (Idling) |
|
JSA JIS D 1030 |
Automobiles - Analytical Procedure for Measurement of Carbon Monoxide, Carbon Dioxide, Total Hydrocarbons and Oxides of Nitrogen in Exhaust Gas |
|
JSA JIS D 1040 |
Method of Driving Test for Motor Cycles |
|
JSA JIS D 1061 |
Steering Control System Laboratory Impact Test Procedure for Passenger Cars |
|
JSA JIS D 1702 |
Road Vehicles - Test Method for the Direct Driver's Field of View |
|
JSA JIS D 4002 |
Internal Dimensions for Rear Body of Motor Trucks |
|
JSA JIS D 4607 |
Three Dimensional Manikins for Use in Defining Automobile Seating Accommodations |
|
JSA JIS D 6301 |
Standard for Construction and Performance of Truck Cranes, Wheel Cranes and Crawler Cranes |
|
JSA JIS D 6510 |
Standard Form of Specifications of Vehicles with Rotary Snow Plough |
|
JSA JIS D 6703 |
Dimensions of Three-Point Linkages for Agricultural Wheeled Tractors |
|
JSA JIS D 6707 |
Testing Method for Drawbar Performance of Agricultural Tractors |
|
JSA JIS D 8004 |
Reflection Type Smokemeters for Measuring Automobile Diesel Engine |
|
JSA JIS D 9401 |
Frame - Assembly for Bicycles-JBPI/JSA |
|
JSA JIS D 9402 |
Front Forks for Bicycles |
|
JSA JIS D 9420 |
Spokes for Bicycles |
|
JSA JIS D 9428 |
Derailleur for Bicycles |
|
JSA JIS D 9454 |
Chain Cases for Bicycles |
|
JSA JIS E 1102 |
Fish plates for rails-Errata: 08/2005; Amendment 1: 03/25/2006 |
|
JSA JIS E 1110 |
Carbon Steel Tie - Plates |
|
JSA JIS E 1123 |
End Hardened Rails |
|
JSA JIS E 1126 |
Expansion joints |
|
JSA JIS E 1201 |
Prestressed concrete sleepers - Pretensioning type |
|
JSA JIS E 1306 |
Railway crossings - Shape and dimensions |
|
JSA JIS E 3012 |
Graphical Symbols for Railway Signaling |
|
JSA JIS E 3015 |
Parts for Railway Signal - Shock Test Methods |
|
JSA JIS E 3701 |
Safety Colour Code for Railway Crossing Equipment |
|
JSA JIS E 4041 |
General Rules for the Inspection of Electric Railcar on Completion of Construction |
|
JSA JIS E 4207 |
Truck Frames for Railway Rolling Stock - General Rules for Design-JARI |
|
JSA JIS E 4501 |
Design Methods for Strength of Axles of Railway Rolling Stock |
|
JSA JIS E 5401-2 |
Carbon Steel Tyres for Railway Rolling Stock - Wheel Centres and Tyred Wheels - Dimensional, Balancing and Assembly Requirements |
|
JSA JIS F 2025 |
Cable Clenches |
|
JSA JIS F 2251 |
Ships´ Light Load Derrick Booms |
|
JSA JIS F 2304 |
Ships´ Manholes |
|
JSA JIS F 2318 |
Ships´ Steel Weather- Tight Doors |
|
JSA JIS F 2329 |
Marine Small Size Manhole-Errata: January, 2003 |
|
JSA JIS F 2602 |
Ships´ Steel Vertical Ladders |
|
JSA JIS F 2603 |
Steel Deck Ladders |
|
JSA JIS F 2607 |
Ships´ Handrail Stanchion |
|
JSA JIS F 3307 |
Anchor Stoppers |
|
JSA JIS F 3907 |
Ships´ S Rings of Chainlet |
|
JSA JIS G 3117 |
Rerolled Steel Bars for Concrete Reinforcement |
|
JSA JIS H 0211 |
Glossary of Terms Used in Surface Treatments by Dry Processing |
|
JSA JIS H 1331 |
General Rules for Chemical Analysis of Magnesium Alloys |
|
JSA JIS H 1699 |
Methods for ICP emission spectrometric analysis of tantalum |
|
JSA JIS H 8683-1 |
Test Methods for Sealing Quality of Anodic Oxide Coatings on Aluminium and Aluminium Alloys - Part 1: Dye Spot Test Method |
|
JSA JIS K 0065 |
Test Method for Freezing Point of Chemical Products |
|
JSA JIS K 0067 |
Test Methods for Loss and Residue of Chemical Products |
|
JSA JIS K 0091 |
Methods for Determination of Carbon Disulfide in Flue Gas |
|
JSA JIS K 0095 |
Methods for sampling of flue gas-ISO 10396:1993 |
|
JSA JIS K 0108 |
Analytical Methods for Determination of Hydrogen Sulfide in Exhaust Gas |
|
JSA JIS K 0119 |
General Rules for X-Ray Fluorescence Spectrometric Analysis |
|
JSA JIS K 0124 |
General Rules for High Performance Liquid Chromatography-JAIMA |
|
JSA JIS K 0131 |
General Rules for X-Ray Diffractometric Analysis |
|
JSA JIS K 0134 |
General rules for near-infrared spectrophotometric analysis-JAIMA |
|
JSA JIS K 0135 |
General Rules for Preparative Liquid Chromatography-(JBA/JSA) |
|
JSA JIS K 0222 |
Methods for Determination of Mercury in Stack Gas |
|
JSA JIS K 0450-40-10 |
Testing method for Hexanedioic acid bis (2-ethylhexl) ester in industrial water and wastewater |
|
JSA JIS K 0555 |
Testing methods for determination of silica in highly purified water |
|
JSA JIS K 0602 |
Methods for Quantitative Analysis of Serum Albumin |
|
JSA JIS K 0605 |
Methods for Quantitative Analysis of Trypsin |
|
JSA JIS K 0608 |
Methods for Quantitative Analysis of Lipase Edition 1 |
|
JSA JIS K 0803 |
Continuous Dissolved Oxygen Analyzer |
|
JSA JIS K 0804 |
Gas Detector Tube Measurement System (Length-Of-Stain Type) |
|
JSA JIS K 1352 |
Acetic Anhydride |
|
JSA JIS K 1353 |
Lactic Acid |
|
JSA JIS K 1501 |
Methanol-MFA |
|
JSA JIS K 1508 |
Trichloroethylene |
|
JSA JIS K 1513 |
Ethyl Acetate |
|
JSA JIS K 1521 |
Perchloroethylene |
|
JSA JIS K 1530 |
Propylene Glycol |
|
JSA JIS K 1570 |
Wood Preservatives-JWPA |
|
JSA JIS K 2536-3 |
Liquid Petroleum Products - Testing Method of components Part 3: Determination of Aromatic Components by Gas Chromatography-PAJ |
|
JSA JIS K 3800 |
Class II Biological Safety Cabinets |
|
JSA JIS K 4112 |
N-Substituted Anilines (N,N-Dimethylaniline.N,N-Diethylaniline.N-Ethylaniline. N-Methylaniline.N-Benzyl-N-Ethylaniline) |
|
JSA JIS K 4114 |
Sulfanilic Acid |
|
JSA JIS K 4129 |
Naphthols (1-Naphthol. 2-Naphthol) |
|
JSA JIS K 4810 |
Testing Methods of Explosives-JEIA |
|
JSA JIS K 5600-1-1 |
Testing Methods for Paints - Part 1: General Rule - Section 1: General Test Methods (Conditions and Methods) |
|
JSA JIS K 5600-1-3 |
Testing Methods for Paints - Part 1: General Rule - Section 3: Examination and Preparation of Samples for Testing-ISO 1513: 1992 |
|
JSA JIS K 5600-2-6 |
Testing Methods for Paints - Part 2: Characteristics and Stability of Paints - Section 6:Pot Life-ISO 9514: 1992 |
|
JSA JIS K 5600-8-3 |
Testing Methods for Paints - Part 8: Evaluation of Degradation of Paint Coatings - Section 3: Designation of Degree of Rusting-ISO 4628-3:1982 |
|
JSA JIS K 5600-8-4 |
Testing Methods for Paints - Part 8: Evaluation of Degradation of Paint Coatings - Section 4: Designation of Degree of Cracking-ISO 4628-4:1982 |
|
JSA JIS K 5600-8-5 |
Testing Methods for Paints - Part 8: Evaluation of Degradation of Paint Coatings - Section 5: Designation of Degree of Flaking-ISO 4628-5:1982 |
|
JSA JIS K 6220-3 |
Rubber compounding ingredients - Test methods - Part 3: Antidegradants-; JRMA |
|
JSA JIS K 8005 |
Reference Materials for Volumetric Analysis |
|
JSA JIS K 8034 |
Acetone |
|
JSA JIS K 8039 |
Acetonitrile for Pesticide Residue and Polychlorinated Biphenyl Analysis-JRA |
|
JSA JIS K 8051 |
Isoamyl Alcohol, 3-Methylbutyl Alcohol |
|
JSA JIS K 8056 |
Alizarin Yellow GG (Salicyl Yellow) |
|
JSA JIS K 8082 |
Anthrone |
|
JSA JIS K 8093 |
Ethanol for Pesticide Residue and Polychlorinated Biphenyl Analysis-JRA |
|
JSA JIS K 8105 |
Ethylene Glycol |
|
JSA JIS K 8110 |
Ethyl acetate for presticide residue and polychlorniated biphenyl analysis-JRA |
|
JSA JIS K 8222 |
Sea Sand (Sand, Washed) |
|
JSA JIS K 8279 |
Quinoline |
|
JSA JIS K 8361 |
Ethyl Acetate |
|
JSA JIS K 8371 |
Sodium Acetate, Trihydrate |
|
JSA JIS K 8461 |
1,4-Dioxane-ADP ISO 6353-3: 1987 |