|
JSA JIS K 8479 |
2,4-Dinitrofluorobenzene |
|
JSA JIS K 8494 |
Methyl Yellow |
|
JSA JIS K 8624 |
Sodium Carbonate DecaHydrate (Reagent) |
|
JSA JIS K 8625 |
Sodium carbonate (Reagent) |
|
JSA JIS K 8676 |
L - Tryptophan |
|
JSA JIS K 8693 |
p-Naphtholbenzein |
|
JSA JIS K 8738 |
Hydroquinone |
|
JSA JIS K 8800 |
Phenol Red |
|
JSA JIS K 8809 |
Potassium Hydrogen Phthalate |
|
JSA JIS K 8812 |
2 - Butanol |
|
JSA JIS K 8830 |
Uranine (Sodium Fluorescein) |
|
JSA JIS K 8838 |
1-Propanol |
|
JSA JIS K 8840 |
Bromocresol Green |
|
JSA JIS K 8848 |
Hexane |
|
JSA JIS K 8887 |
Phthalic Anhydride |
|
JSA JIS K 8920 |
Iodine |
|
JSA JIS K 8951 |
Sulfuric Acid |
|
JSA JIS K 9103 |
L-Glutamine |
|
JSA JIS K 9107 |
L-Proline |
|
JSA JIS K 9524 |
Arsenazo III |
|
JSA JIS K 9563 |
Xylenol Orange (XO) |
|
JSA JIS L 0112 |
Glossary of Terms on Parts and Measurements of Clothes |
|
JSA JIS L 0202 |
Nomenclature of Hand Knitting Machine |
|
JSA JIS L 0219 |
Glossary of terms used in ropes-ISO 1968:1973 |
|
JSA JIS L 1021 |
Testing Methods for Construction of Textile Floor Coverings |
|
JSA JIS L 4404 |
Woven Carpets |
|
JSA JIS L 5113 |
Weft Bobbins for Cop Change |
|
JSA JIS L 6418 |
Take-Up Strips for Looms |
|
JSA JIS P 8151 |
Paper and board - Determination of roughness/smoothness (air leak methods) - Print-surf method-JAPAN/TAPPI |
|
JSA JIS Q 0031 |
Contents of Certificates of Reference Materials-ISO GUIDE 31:2000 |
|
JSA JIS Q 0067 |
Conformity assessment - Fundamentals of product certification-ISO/IEC GUIDE 66:1999 |
|
JSA JIS Q 1011 |
Conformity assessment - Conformity assessment for Japanese Industrial Standards - Guidance on a third-party certification system for Ready-mixed concrete products |
|
JSA JIS Q 14004 |
Environmental management systems - General guidelines on principles, systems and support techniques-ISO 14004:2004 |
|
JSA JIS Q 17011 |
Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies-ISO/IEC 17011: 2004 |
|
JSA JIS Q 17050-1 |
Conformity Assessment - Supplier´s declaration of conformity - Part 1: General requirements-ISO/IEC 17050-1: 2004 |
|
JSA JIS R 3209 |
Sealed Insulating Glass |
|
JSA JIS R 5214 |
Ecocement-JCA |
|
JSA JIS R 6242 |
Bonded abrasive products - General requirements |
|
JSA JIS S 0021 |
Guidelines for all People Including Elderly and People with Disabilities - Packaging and Receptacles |
|
JSA JIS S 1037 |
Fire-Resistive Containers |
|
JSA JIS S 1061 |
Domestic Furniture - Student Desk-JOIFA |
|
JSA JIS S 2036 |
Open Type Forced Ventilating Oil Burning Space Heaters |
|
JSA JIS S 2043 |
Glass Tumblers |
|
JSA JIS S 2093 |
Test Methods of Gas Burning Appliances for Domestic Use |
|
JSA JIS S 2147 |
Portable Cookers Attached to Liquefied Petroleum Gas Cylinder |
|
JSA JIS S 7001 |
Fishing hooks |
|
JSA JIS S 7027 |
Ski Goggles |
|
JSA JIS T 0111-3 |
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 3: Principal Structural Tests-(ISO 10328-3:1996) |
|
JSA JIS T 0111-4 |
Prosthetics - Structural Testing of Lower-Limb Prostheses - Part 4: Loading Parameters of Principal Structural Tests-(ISO 10328-4:1996) |
|
JSA JIS T 0601-2-202 |
Medical electrical equipment - Particular requirements for the safety of ultraviolet therapy equipment-JIPT |
|
JSA JIS T 1011 |
Glossary of Terms Used in Medical Electrical Equipment (General Terms) |
|
JSA JIS T 3101 |
Injection Needles |
|
JSA JIS T 3223 |
Sterile, single-use intravascular catheters over-needle peripheral catheters-ERRATA:September 2006; JMED |
|
JSA JIS T 3225 |
Sterile transfusion filter-JMED |
|
JSA JIS T 3233 |
Evacuated single-use containers for venous blood specimen collection-JMED |
|
JSA JIS T 3237 |
Sterile devices of endoscopic variceal ligation for single use-JMED |
|
JSA JIS T 3241 |
Sterile over tube for single use-JMED |
|
JSA JIS T 5402 |
Dental Explorers |
|
JSA JIS T 6104 |
Cobalt-Chromium Alloy Wires for Dental Use |
|
JSA JIS T 6106 |
Dental Casting Gold-Silver-Palladium Alloys |
|
JSA JIS T 6110 |
Dental Fusible Alloy |
|
JSA JIS T 6117 |
Dental Gold Alloy Solders |
|
JSA JIS T 6501 |
Acrylic Denture Base Resin |
|
JSA JIS T 6504 |
Dental Impression Compound |
|
JSA JIS T 6510 |
Dental Base Plates |
|
JSA JIS T 6512 |
Dental Agar Impression Material |
|
JSA JIS T 6601 |
Gypsum-Bonded Dental Investments for Casting |
|
JSA JIS T 6602 |
Dental Zinc Phosphate Cement |
|
JSA JIS T 6604 |
Dental Plaster |
|
JSA JIS T 7205 |
Manual (Operator-Powered) Resuscitators |
|
JSA JIS T 7206 |
Gas-Powered Resuscitators |
|
JSA JIS T 7317 |
Operation Microscopes |
|
JSA JIS T 7402-4 |
Cobalt based alloys for surgical implant applications - part 2: Wrought cobalt-chromium-nickel-molybdenum-iron alloy-JSB |
|
JSA JIS T 8133 |
Protective Helmets for Drivers and Passengers of Motorcycle and Mopeds-Errata: February 2002 |
|
JSA JIS T 8159 |
Leakage Rate Testing Method for respiratory protective devices-JSAA |
|
JSA JIS T 8201 |
Oxygen Indicator/Alarm |
|
JSA JIS T 9106 |
Rubber Nipples |
|
JSA JIS T 9111-3 |
Rubber Condoms- Part 3: Determination of Width-ISO 4074-3 : 1994 |
|
JSA JIS T 9205 |
Manually operated hospital gatch bed-HEAJ |
|
JSA JIS T 9206 |
Requirements and Test Methods for Electromagnetic Compatibility of Electrically Powered Wheelchairs and Motorized Scooters-(JBPI/JSA) |
|
JSA JIS T 9216 |
Metallic Knee Joints for Lower Extremity Orthoses |
|
JSA JIS T 9219 |
Functional Elbow Units |
|
JSA JIS T 9221 |
Control Cable System Units |
|
JSA JIS T 9224 |
Cosmetic Hands for Arm Prostheses |
|
JSA JIS TR Q 0003 |
Environmental labels and declarations - Type III Environmental declarations |
|
JSA JIS TR Q 0005 |
Quality management system - Guidelines for sustainable qrowth |
|
JSA JIS TR Q 0006 |
Quality management system - Guidelines for self-assessment |
|
JSA JIS TR Q 0008 |
Risk Management - Vocabulary Guidelines for Use in Standards-ISO/IEC Guide 73:2002 |
|
JSA JIS X 0001 |
Glossary of Terms Used in Information Processing (Fundamental Terms)-ISO/IEC 2382-1: 1993 (MOD) |
|
JSA JIS X 8341-2 |
Guidelines for Older Persons and Persons with Disabilities - Information and Communications Equipment, Software and Services - Part 2: Information Processing Equipment |
|
JSA JIS Z 2382 |
Determination of Pollution for Evaluation of Corrosivity of Atmospheres |
|
JSA JIS Z 2502 |
Metallic Powders - Determination of Flowability by Means of a Calibrated Funnel (Hall Flowmeter) |
|
JSA JIS Z 3011 |
Welding Position Defined by Means of Angles of Slope and Rotation-(JWES/JSA) |
|
JSA JIS Z 3120 |
Method of Inspection for Gas Pressure Welded Joint of Steel Bars for Concrete Reinforcement |
|
JSA JIS Z 3191 |
Method of Wetting Test for Brazing Filler Metals |
|
JSA JIS Z 3253 |
Shielding gases for arc welding and plasma arc cutting-JWES |
|
JSA JIS Z 4606 |
Industrial X-ray apparatus for radiographic testing |
|
JSA JIS Z 4752-2-1 |
Evaluation and routine testing in medical imaging departments - Part 2-1: Constancy tests - Film processors-JSRT |
|
JSA JIS Z 7250 |
Safety Data Sheet for Chemical Products - Part 1: Content and Order of Sections-JCIA |
|
JSA JIS Z 8101-1 |
Statistics - Vocabulary and Symbols - Part 1: Probability and General Statistical Terms-Replaces JIS 8101 |
|
JSA JIS Z 8102 |
Names of Non-Luminous Object Colours |
|
JSA JIS Z 8105 |
Glossary of Colour Terms |
|
JSA JIS Z 8106 |
Glossary of Acoustical Terms (General) |
|
JSA JIS Z 8121 |
Glossary of Terms Used in Operations Research |
|
JSA JIS Z 8201 |
Mathematical Symbols |
|
JSA JIS Z 8312 |
Technical Drawings - General Principles of Presentation - Basic Convention for Lines-ISO 128-20: 1996 |
|
JSA JIS Z 8315-4 |
Technical Drawings - Projection Methods - Part 4: Central Projection-ISO 5456-4:1996 |
|
JSA JIS Z 8513 AMD 1 |
Ergonomics - Office Work with Visual Display Terminals (VDTs) - Visual Display Requirements |
|
JSA JIS Z 8726 |
Method of Specifying Colour Rendering Properties of Light Sources |
|
JSA JIS Z 8813 |
Measuring Methods for Suspended Particulate Matter Concentration in Air-General Requirements |
|
JSA JIS Z 8815 |
Test Sieving |
|
JSA JIS Z 8909-1 |
Test method of filter media for dust collection Part 1: Filter efficiency-(APPIE/JSA) |
|
JSA JIS Z 9020 |
Control Charts - General Guide and Introduction-ISO 7870: 1993 |
|
JSA JIS Z 9041-2 |
Statistical Interpretation of Data - Part 2: Techniques of Estimation and Test Relating to Means and Variances-JIS Z 9042:1962,JIS Z 9043:1962,JIS Z 9044:1962,JIS Z 9045:1962,JIS Z 9046:1965,JIS Z 9047:1979,JIS Z 9048:1979,JIS Z 9049:1965,JIS Z 9050:1963, JIS Z 9051:1963,JIS Z 9052:1963,JIS Z 9053:1963,JIS Z 9054:1966,JIS Z 9055:1966,JIS Z 9056:1979,JIS Z 9057:1966,JIS Z 9058:1966,JIS Z 9059:1966 were withdrawn and replaced with JIS Z 9041-2:1999 |
|
JSA JIS Z 9080 |
Sensory analysis - Methodology-(JSSE/JSA) |
|
JSA JIS Z 9112 |
Classification of Fluorescent Lamps by Chromaticity and Colour Rendering Property |
|
JSA JIS A 1962 |
Indoor air - Determination of formaldehyde and other carbonyl compounds - Active sampling method-(Japanese only) |
|
JSA JIS A 9401 |
Recycled plastics medial strip block |
|
JSA JIS B 9716 |
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
|
JSA JIS C 5070 |
Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide-(Japanese Only) |
|
JSA JIS K 0211 |
Technical Terms for Analytical Chemistry (General Part)-(Japanese Only) |
|
JSA JIS K 1351 |
Acetic Acid |
|
JSA JIS K 2265-3 |
Determination of flash point - Part 3: Pensky-Martens closed cup method |
|
JSA JIS K 8659 |
Starch, soluble (Reagent) |
|
JSA JIS Q 1012 |
Conformity assessment - Conformity assessment for Japanese Industrial Standards - Guidance on a third-party certification system for precast concrete products-Japanese Only |
|
JSA JIS S 0022-4 |
Guidelines for Older Persons and Persons with Disabilities - Packaging and Receptacles - Evaluation Methods by users |
|
JSA JIS T 8030 |
Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation of liquids and gases-Japanese Only |
|
JSA JIS T 8051 |
Protective cloting - Mechanical properties - Determination of resistance to puncture |
|
JSA JIS T 8061 |
Clothing for protection against contact with blood and body fluids - Determination of resistance of protective clothing materials to penetration by blood-borne pathogens - Test method using Phi-X174 bacteriophage |
|
JSA JIS A 1476 |
Measuring Method for Moisture Content of Building Materials by Drying at Elevated Temperature |
|
JSA JIS A 5011-1 |
Slag aggregate for concrete - Part 1: Blast furnace slag aggregate |
|
JSA JIS A 8330-5 |
Earth-moving machinery - Operator enclosure environment - Part 5: Windscreen defrosting system test method |
|
JSA JIS A 8330-6 |
Earth-moving machinery - Operator enclosure environment - Part 6: Determination of effect of solar heating on operator enclosure |
|
JSA JIS B 9714 |
Safety of machinery-Prevention of unexpected start-up |
|
JSA JIS D 0050 |
Load Distribution for Passenger Cars-(Japanese Only); ISO 2416: 1992 |
|
JSA JIS K 0450-60-10 |
Testing method for individual 4-nonylphenol isomers in industrial water and wastewater |
|
JSA JIS K 2265-4 |
Determination of flash point - Part 4: Cleveland open cup method |
|
JSA JIS Q 14063 |
Environmental management - Environmental communication - Guidelines and examples |
|
JSA JIS Q 20000-2 |
Information technology - Service management - Part 2: Code of practice |
|
JSA JIS T 0601-2-203 |
Medical electrical equipment - Particular requirements for the safety of infrared therapy equipment-(Japanese Only) |
|
JSA JIS T 5109 |
Electric Dental Engines-(Japanese Only) |
|
JSA JIS T 8023 |
Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven |
|
JSA JIS T 8032 |
Protective clothing - Protection against gaseous and liquid chemicals - Determination of resistance of protective clothing to penetration by liquids and gases |
|
JSA JIS T 8060 |
Clothing for protection against contact with blood and body fluids - Determination of the resistance of protective clothing materials to penetration by blood and body fluids - Test method using synthetic blood |
|
JSA JIS T 9255 |
Chairs and seats with electrical mechanisms assist standing up and sitting down |
|
JSA JIS Z 8823-2 |
Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method-(Japanese Only) |
|
JSA JIS A 1967 |
Indoor air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Diffusive sampling-Japanese only |
|
JSA JIS B 9715 |
Safety of machinery - Positioning of protective equipment with respect to the approach speeds of parts of the human body |
|
JSA JIS K 8659 |
Starch, soluble (Reagent)-(Japanese Only) |
|
JSA JIS Q 20000-1 |
Information technology - Service management - Part 1: Specification |
|
JSA JIS T 5404 |
Dental Excavators-JDMMA |
|
JSA JIS T 8006 |
Clothing for protection against heat and flame - General recommendations for selection, care and use of protective clothing |
|
JSA JIS A 9402 |
Recycled plastics buffers for parking |
|
JSA JIS S 0022-3 |
Guidelines for older persons and persons with disabilities - Packaging and receptacles - Tactile indication for identification |
|
JSA JIS S 0026 |
Guidelines for older persons and persons with disabilities-shape, colur, and arrangement of toilet opertaion equipment and appliance in public rest room |
|
JSA JIS T 8005 |
Protective clothing - General requirements-Japanese Only |
|
JSA JIS T 8021 |
Protective clothing against heat and flame - Determination of heat transmission on exposure to flame-Japanese Only |
|
JSA JIS T 8022 |
Protective clothing - Protection against heat and flame - Method of test for limited flame spread |
|
JSA JIS Z 8820-2 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method-(Japanese Only) |