|
JSA JIS M 8852 |
Methods for Chemical Analysis of Silicastone |
|
JSA JIS P 0001 |
Glossary of Terms Used in Pulps and Papers Industry |
|
JSA JIS P 3401 |
Kraft Papers |
|
JSA JIS P 3904 |
Corrugating Media |
|
JSA JIS P 8113 |
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method |
|
JSA JIS P 8120 |
Testing Method for Fibre Composition of Paper |
|
JSA JIS P 8142 |
Testing Method for 75 Degree Specular Gloss of Paper and Paperboard |
|
JSA JIS P 8202 |
Method of Testing Water Content of Lot of Paper Pulp |
|
JSA JIS R 0301 |
Heat Balancing of Pottery and Refractory Firing Tunnel Kiln |
|
JSA JIS R 1201 |
Clay Pipes |
|
JSA JIS R 1603 |
Methods for Chemical Analysis of Fine Silicon Nitride Powders for Fine Ceramics |
|
JSA JIS R 1609 |
Testing Methods for Oxidation Resistance of Non-Oxide High Performance Ceramics |
|
JSA JIS R 1610 |
Testing Method for Vickers Hardness of High Performance Ceramics |
|
JSA JIS R 1616 |
Methods for Chemical Analysis of Fine Silicon Carbide Powders for Fine Ceramics |
|
JSA JIS R 1620 |
Testing Methods for Particle Density of Fine Ceramic Powder |
|
JSA JIS R 1624 |
Testing Method for Bending Strength of Fine Ceramic Joint |
|
JSA JIS R 1631 |
Test Method for Tensile Creep of FIne Ceramics |
|
JSA JIS R 1634 |
Test methods for density and apparent porosity of fine ceramics |
|
JSA JIS R 1637 |
Test Method for Resistivity of Conductive Fine Ceramic Thin Films with a Four-Point Probe Array |
|
JSA JIS R 2104 |
Shape and Dimension of Refractory Bricks for Cupola |
|
JSA JIS R 2150 |
Method of Inspection for Dimension of Refractory Bricks |
|
JSA JIS R 2203 |
Method of Measuring Warpage of Refractory Bricks |
|
JSA JIS R 2611 |
Insulating Fire Bricks |
|
JSA JIS R 2619 |
Testing Method for Modulus of Rupture of Insulating Fire Bricks |
|
JSA JIS R 2652 |
Testing Method for Grain Size of Light Weight Castable Refractories |
|
JSA JIS R 3105 |
Methods for Chemical Analysis of Borosilicate Glasses |
|
JSA JIS R 3414 |
Textile Glass Fabrics |
|
JSA JIS R 3425 |
Textile Glass Fabrics for Surfacing |
|
JSA JIS R 7222 |
Test Methods for Physical Properties of Graphite Materials |
|
JSA JIS R 7231 |
Testing Method for Solderberg Paste |
|
JSA JIS T 6117 |
Dental Gold Alloy Solders |
|
JSA JIS Z 1512 |
Gummed Cloth Tapes (for Packaging) |
|
JSA JIS Z 1514 |
Polyethylene Treated Paper |
|
JSA JIS Z 1529 |
Pressure sensitive adhesive films for printing-JATMA |
|
JSA JIS Z 1713 |
Cast Polypropylene Films for Packaging |
|
JSA JIS Z 1901 |
Pressure Sensitive Adhesive Polyvinyl Chloride Tapes for Corrosion Protection-JATMA |
|
JSA JIS Z 1903 |
Petrolatum Paste for Corrosion Protection |
|
JSA JIS Z 9117 |
Retroreflective Sheeting and Tape for Safety |
|
JSA JIS A 1323 |
Flame Retardant Testing Method for Spark Droplets of Welding and Gas Cutting on Fabric Sheets in Construction Works |
|
JSA JIS A 1420 |
Determination of Steady-State Thermal Transmission Properties - Hot Box Method-Errata: 02/2005 |
|
JSA JIS A 5364 AMD 1 |
Precast Concrete Products - General Rules of Materials and Product Methods (Amendment 1) |
|
JSA JIS A 5536 |
Adhesives for Floorcovering - P.V.C.-Edition 1 |
|
JSA JIS A 6322 |
Glass Wool Isolating Material for Floating Floors |
|
JSA JIS A 6930 |
Plastic Films Vapour Barrier for Residential Use |
|
JSA JIS A 6931 |
Paper Cores for Panel |
|
JSA JIS A 9510 |
Inorganic Porous Thermal Insulation Materials |
|
JSA JIS B 9930 |
Determination of Particulate Contamination in Hydraulic Fluids by the Particle Count Method |
|
JSA JIS C 2254 |
Rigid Mica Materials for Electric Heating Equipment-JEIA |
|
JSA JIS C 2315 |
Vulcanized Fibre Sheet |
|
JSA JIS C 2317 |
Polyester Film Lamination for Electrical Insulation |
|
JSA JIS C 2351 |
Varnishes for Enameled Wires |
|
JSA JIS C 60695-10-2 |
Fire Hazard Testing Part 10: Guidance and Test Methods for the Minimization of the Effects of Abnormal Heat on Electrotechnical Products Involved in Fires - Section 2: Method for Testing Products Made from Non-Metallic Materials for Resistance to Heat Using the Ball Pressure Test-IEC 60695-10-2: 1995; RCJ; Renumbers JIS C 0078: 2000 |
|
JSA JIS C 6485 |
Copper-Clad Laminates for Printed Wiring Boards - Paper Base, Phenolic Resin |
|
JSA JIS C 6488 |
Base materials for printed circuits - Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammablity (vertical burning test) |
|
JSA JIS C 6522 |
Prepreg for Multilayer Printed Wiring Boards - Epoxy Resin-Impregnated Glass Cloth Edition 1 |
|
JSA JIS G 3491 |
Asphalt Protective Coatings for Steel Water Pipe |
|
JSA JIS G 5902 |
Molding Natural Sand |
|
JSA JIS H 0603 |
Measurement of Minority Carrier Life Time in Germanium by Photoconductive Decay Method |
|
JSA JIS H 0610 |
Method of Measurement of Etch Pit Density of Germanium Crystal |
|
JSA JIS H 5801 |
Titanium and Titanium Alloy Castings |
|
JSA JIS H 8250 |
Graphical Symbol for Thermal Spraying-JTSS |
|
JSA JIS H 8503 |
Methods of Wear Resistance Test for Metallic Coatings |
|
JSA JIS H 8620 |
Electroplated Coatings of Gold and Gold Alloy for Engineering Purposes |
|
JSA JIS H 8679-1 |
Evaluation Methods for Pitting Corrosion of Anodic Oxide Coatings on Aluminium and Aluminium Alloys - Part 1: Chart Method |
|
JSA JIS H 8681-2 |
Test Methods for Corrosion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys- Part 2: CASS Test |
|
JSA JIS H 8687 |
Test Methods for Dielectric Strength of Anodic Oxidation Coatings on Aluminium and Aluminium Alloys-Edition 1 |
|
JSA JIS K 0042 |
High Accuracy Standards for Carbon Dioxide |
|
JSA JIS K 0229 |
Testing Methods for Determination of the Inhibition of the Mobility of Daphnia by Chemicals |
|
JSA JIS K 0512 |
Hydrogen H2 M=2.0160 |
|
JSA JIS K 0550 |
Testing Methods for Detection and Estimation of Micro-Biological Contaminants in Highly Purified Water |
|
JSA JIS K 0610 |
Tentative Method for Quantitative Analysis by Immunoturbidimetry of Human Serum Albumin Edition 1 |
|
JSA JIS K 2206 |
Aviation Gasoline |
|
JSA JIS K 2235 |
Petroleum Waxes |
|
JSA JIS K 2238 |
Machine Oils |
|
JSA JIS K 2239 |
Bearing Oils |
|
JSA JIS K 2240 |
Liquefied Petroleum Gases |
|
JSA JIS K 2251 |
Crude Petroleum and Petroleum Products - Sampling |
|
JSA JIS K 2254 |
Petroleum Products - Determination of Distillation Characteristics |
|
JSA JIS K 2275 |
Testing Methods for Water Content of Crude Oil and Petroleum Products |
|
JSA JIS K 2279 |
Testing Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter |
|
JSA JIS K 2287 |
Gasoline - Determination of Oxidation Stability - Induction Period Method |
|
JSA JIS K 2408 |
Corrosion Inhibitors for Engine Coolant |
|
JSA JIS K 2519 |
Testing Methods for Load Carrying Capacity of Lubricating Oil |
|
JSA JIS K 2839 |
Glassware for Testing Apparatus of Petroleum Products |
|
JSA JIS K 3302 AMD 1 |
Laundry Bar Soaps |
|
JSA JIS K 3801 |
Test Method of HEPA Filters for Microbiological Use |
|
JSA JIS K 3901 |
Shoe Polish |
|
JSA JIS K 5110 |
Chrome Yellow (Pigment) |
|
JSA JIS K 5113 |
Iron Blue (Pigment) |
|
JSA JIS K 5516 |
Ready Mixed Paint (Synthetic Resin Type)-JPMA; Errata June, 2004 |
|
JSA JIS K 5531 |
Nitrocellulose Lacquer-JPMA |
|
JSA JIS K 5535 |
Lacquer Undercoat |
|
JSA JIS K 5555 |
Epoxy Resin Micaceous Iron Oxide Paint |
|
JSA JIS K 5600-3-6 |
Testing Methods for Paints - Part 3: Film Formability - Section 6: Print Free Test |
|
JSA JIS K 5600-4-7 |
Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 7: Specular Gloss |
|
JSA JIS K 5600-5-10 |
Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 10: Abrasion Resistance (Reciprocating Test Panel Method)-ISO/DIS 7784-3.2: 1997; Errata - 11/2002 |
|
JSA JIS K 5600-6-1 |
Testing Methods for Paints - Part 6: Chemical Property of Film - Section 1: Resistance to Liquids (General Methods)-ISO 2812-1: 1993; Errata - 11/2002 |
|
JSA JIS K 5600-7-3 |
Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 3: Resistance to Humidity (Intermittent Condensation)-ISO 11503:1995; Errata - 11/2002 |
|
JSA JIS K 5600-8-2 |
Testing Methods for Paints - Part 8: Evaluation of Degradation of Paint Coatings - Section 2: Designation of Degree of Blistering-ISO 4628-2:1982 |
|
JSA JIS K 5601-1-1 |
Testing Methods for Paint Components - Part 1: General Rule - Section 1: Common Test Conditions for Paint Components-K 5407 corresponding to this Standard will be withdrawn and replaced with this Standard in April 2002; Errata - 11/2002 |
|
JSA JIS K 5601-2-1 |
Testing Methods for Paint Components - Part 2: Component Analysis in Solvent Soluble Matter - Section 1: Acid Value (Titrimetric Method)-ISO 3682:1983; K 5407 corresponding to this Standard will be withdrawn and replaced with this Standard in April 2002; Errata - 11/2002 |
|
JSA JIS K 5622 |
Red-Lead Anticorrosive Paint |
|
JSA JIS K 5625 |
Lead Cyanamide Anticorrosive Paint |
|
JSA JIS K 5627 |
Zinc Chromate Anticorrosive Paint |
|
JSA JIS K 5629 |
Calcium Plumbate Anticorrosive Paint |
|
JSA JIS K 5639 |
Chlorinated Rubber Paints |
|
JSA JIS K 5641 |
Cashew Resin Paints |
|
JSA JIS K 5646 |
Cashew Resin Undercoats |
|
JSA JIS K 5651 |
Aminoalkyd Resin Paint; (Errata-1994) |
|
JSA JIS K 5654 |
Acrylic Resin Enamel |
|
JSA JIS K 5661 |
Fire-Retardant Paints for Buildings ; (Erratum) |
|
JSA JIS K 5667 |
Multicolor Paint Edition 1; (Erratum - 1996) |
|
JSA JIS K 5960 |
Household Paint for Interior Wall |
|
JSA JIS K 5962 |
Household Paint for Wood and Metal |
|
JSA JIS K 6219-2 |
Carbon black for rubber industry - Characteristics of pelletized carbon black - Part 2: Determination of pour density-JRMA |
|
JSA JIS K 6219-4 |
Carbon black for rubber industry - Characteristics of pelletized carbon black - Part 2: Determination of pellet size distribution-JRMA |
|
JSA JIS K 6250 |
General Rules of Physical Testing Methods for Rubber, Vulcanized or Thermoplastic |
|
JSA JIS K 6264-1 |
Rubber, Vulcanized or Thermoplastic - Determination of Abrasion Resistance - Part 1: Guide |
|
JSA JIS K 6384 |
Testing Methods for Synthetic Rubber NBR |
|
JSA JIS K 6388 |
Testing Methods for Synthetic Rubber CR |
|
JSA JIS K 6395 |
Rubber, Ethylene-Propylene-Diene (EPDM) - General Purpose Types - Evaluation Procedure |
|
JSA JIS K 6503 |
Animal Glues and Gelatins-GGMJ |
|
JSA JIS K 6505 |
Testing Method for Man-Made Upper Material of Shoes |
|
JSA JIS K 6703 |
Industrial Nitrocellulose |
|
JSA JIS K 6735 |
Polycarbonate Sheets |
|
JSA JIS K 6746 |
Plastic Welding Rods |
|
JSA JIS K 6772 |
Polyvinylchloride Coated Fabric |
|
JSA JIS K 6776 |
Chlorinated Poly(vinyl Chloride) (PVC-C) Pipes for Hot and Cold Water Supply |
|
JSA JIS K 6792 |
Polybutene (PB) Pipes for Water Works-JPBPA, JPIF; Errata: 03/2006 |
|
JSA JIS K 6796 |
Pipes and Fitting Made of Crosslinked Polyethylene (PE-X) - Estimation of the Degree of Crosslinking by Determination of the Gel Content-ISO 10147:1994 |
|
JSA JIS K 6804 |
Poly (Vinylacetate) Emulsion Adhesives for Woods |
|
JSA JIS K 6812 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
|
JSA JIS K 6828-2 |
Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature |
|
JSA JIS K 6861 |
Testing Methods for a-Cyanoacrylate Adhesives |
|
JSA JIS K 6862 |
Testing Methods for Melt Viscosity of Hot-Melt Adhesives |
|
JSA JIS K 6873 |
Acrylonitrile-Butadiene-Styrene (ABS) Sheets |
|
JSA JIS K 6885 |
Unsintered polytetrafluoroethylene tapes for thread sealing-JFIA/JPIF |
|
JSA JIS K 6892 |
Testing Methods for Polytetrafluoroethylene Powder for Paste Extrusion |
|
JSA JIS K 6894 |
Fluoroplastic Coating Film on Metal Substrate |
|
JSA JIS K 7011 |
Glass Fiber Reinforced Plastics for Structural Use-Errata: 10/1994; Errata: 11/1994 |
|
JSA JIS K 7013 |
Fibre Reinforced Plastic Pipes |
|
JSA JIS K 7031 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipe and Fitting - Test Methods to Prove the Leaktightness of the Wall Under Short-Term Internal Pressure-ISO/DIS 7511:1996 |
|
JSA JIS K 7035 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Creep Factor Under Wet Conditions and Calculation of the Longterm Specific Ring Stiffness-ISO/DIS 10468.2:1997 |
|
JSA JIS K 7037 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Apparent Initial Circumferential Tensile Strength-ISO/FDIS 8521:1997 |
|
JSA JIS K 7038 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method to Prove the Resistance to Initial Ring Deflection-ISO 10466:1997 |
|
JSA JIS K 7039 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Long-Term Ultimate Bending Strain and Calculation of the Long-Term Ultimate Relative Ring Deflection, Both Under Wet Conditions-ISO/DIS 10471.2:1997 |
|
JSA JIS K 7060 |
Testing Method for Barcol Hardness of Glass Fiber Reinforced Plastics |
|
JSA JIS K 7073 |
Testing Method for Tensile Properties of Carbon Fiber Reinforced Plastics |
|
JSA JIS K 7083 |
Testing Method for Constant-Load Amplitude Tension - Tension Fatigue of Carbon Fibre Reinforced Plastics |
|
JSA JIS K 7084 |
Testing Method for Impact Properties of Carbon Fibre Reinforced Plastics by Instrumented 3-Point Bending Impact Test |
|
JSA JIS K 7085 |
Testing Method for Multiaxial Impact Behaviour of Carbon Fibre Reinforced Plastics |
|
JSA JIS K 7086 |
Testing Methods for Interlaminar Fracture Toughness of Carbon Fibre Reinforced Plastics-Edition 1; Errata - January 1997 |
|
JSA JIS K 7088 |
Testing Methods for Flexural Creep of Carbon Fibre Reinforced Plastics |
|
JSA JIS K 7102 |
Testing Method for Colour Fastness of Plastics upon Exposure to Light of the Carbon Arc |
|
JSA JIS K 7106 |
Testing Method for Stiffness of Plastics by Means of a Cantilever Beam |
|
JSA JIS K 7109 |
General Tolerancing Rules for Plastics Dimensions |
|
JSA JIS K 7112 |
Plastics - Methods of Determining the Density and Relative Density of Non-Cellular Plastics |
|
JSA JIS K 7115 |
Plastics - Determination of Creep Behaviour - Part 1: Tensile Creep |
|
JSA JIS K 7119 |
Testing Method of Flexural Fatigue of Rigid Plastics by Plane Bending |
|
JSA JIS K 7122 |
Testing Methods for Heat of Transitions of Plastics |
|
JSA JIS K 7129 |
Testing Methods for Water Vapor Transmission Rate of Plastic Film and Sheeting (Instrument Method) |
|
JSA JIS K 7160 |
Plastics - Determination of Tensile-Impact Strength-ISO 8256: 1990 |
|
JSA JIS K 7194 |
Testing Method for Resistivity of Conductive Plastics with a Four-Point Probe Array-Errata September 2003 |
|
JSA JIS K 7197 |
Testing Method for Linear Thermal Expansion Coefficient of Plastics by Thermomechanical Analysis |
|
JSA JIS K 7214 |
Testing Methods for Shear Strength of Plastics by Punch Tool |
|
JSA JIS K 7218 |
Testing Methods for Sliding Wear Resistance of Plastics |
|
JSA JIS K 7224 |
Testing Method for Water Absorption Rate of Super Absorbent Polymers |
|
JSA JIS K 7225 ERTA 1 |
Rigid cellular plastics - Determination of water vapour transmission properties |
|
JSA JIS K 7227 |
Plastics - Determination of the Effects of Exposure to Damp Heat, Water Spray and Salt Mist-ISO 4611:1987 |
|
JSA JIS K 7234 |
Testing Methods for Softening Point of Epoxide Resins |
|
JSA JIS K 7236 |
Testing Methods for Epoxy Equivalent of Epoxide Resins |
|
JSA JIS K 7238 |
Designation of Epoxide Resins |
|
JSA JIS K 7244-1 |
Plastics - Determination of Dynamic Mechanical Properties - Part 1: General Principles-ISO 6721-1:1994 |
|
JSA JIS K 7350-4 |
Plastics - Methods of Exposure to Laboratory Light Sources Part 4: Open-Flame Carbon-Arc Lamps-ISO 4892-4: 1994 |
|
JSA JIS K 7361-1 |
Plastics - Determination of the Total Luminous Transmittance of Transparent Materials - Part 1: Single Beam Instrument-ISO 13468-1:1996 |
|
JSA JIS K 8251 |
Glass Wool |
|
JSA JIS K 8736 |
Eriochrome Black T (1-(1-Hydroxy-2-Naphthylazo)-6-Nitro-2-Naphthol-4-Sulfonic Acid Sodium Salt) |
|
JSA JIS L 0101 |
Tex system to designate linear density of fibres, yarn intermediate, yarns and other textile materials-ISO 2947:1973 |
|
JSA JIS L 0216 |
Glossary of Terms Used in Feathers |
|
JSA JIS L 1055 |
Testing Methods for Light Blocking Effect of Curtain Materials |
|
JSA JIS L 1081 |
Testing Methods for Wool Fibres and Hairs |
|
JSA JIS L 1095 |
Testing Methods for Spun Yarn |
|
JSA JIS L 2001 |
Cotton Wadding |
|
JSA JIS L 2310 |
Silk Sewing Thread |
|
JSA JIS L 3405 |
Hessian Cloths |
|
JSA JIS M 8083 |
Methods for Sampling of Non-Ferrous Flotation Concentrates in Bulk |
|
JSA JIS M 8108 |
Chromium, Manganese and Ferruginous Manganese Ores - Sampling and Determination of Moisture Content and Size Distribution |
|
JSA JIS M 8126 |
Methods for Determination of Nickel in Ores |
|
JSA JIS M 8130 |
Methods for Determination of Antimony in Ores |
|
JSA JIS M 8132 |
Methods for Determination of Arsenic in Ores |
|
JSA JIS M 8203 |
General Rules for Chemical Analysis of Manganese Ores |
|
JSA JIS M 8212 |
Methods for Determination of Total Iron in Iron Ores |
|
JSA JIS M 8215 |
Methods for Determination of Manganese in Iron Ores |
|
JSA JIS M 8215-1 |
Iron Ores - Determination Of Manganese Content - Part 1: Flame Atomic Absorption Spectrometric Method |
|
JSA JIS M 8218 |
Iron Ores - Methods for Determination of Copper Content |
|
JSA JIS M 8222 |
Iron Ores - Methods for Determination of Magnesium Content |
|
JSA JIS M 8228 |
Iron Ores - Methods for Determination of Zinc Content |
|
JSA JIS M 8233 |
Methods for Determination of Active Oxygen in Manganese Ores |
|
JSA JIS M 8236 |
Methods for Determination of Phosphorus in Manganese Ores |
|
JSA JIS M 8268 |
Chromium Ores - Determination of Sulfur Content |
|
JSA JIS M 8713 |
Test Methods for Determination of Reducibility of Iron Ores |
|
JSA JIS M 8716 |
Iron Ore Pellets - Determination of Apparent Density and Porosity |
|
JSA JIS M 8719 |
Iron Ore Pellets - Determination of Volume |
|
JSA JIS M 8810 |
General Rules for Sampling, Analysis and Testing of Coal and Coke |
|
JSA JIS M 8850 |
Methods for Chemical Analysis of Limestone |
|
JSA JIS P 8014 |
Testing Method for Density of Pulpwood and Woodchips |
|
JSA JIS P 8112 |
Paper and Board - Determination of Bursting Strength by Mollen Low-Pressure Tester |
|
JSA JIS P 8121 |
Pulps - Determination of Drainability |
|
JSA JIS P 8136 |
Testing Method of Abrasion Resistance of Paperboard |
|
JSA JIS P 8141 |
Paper and Board - Determination of Capillary Rise - Klemm Method-Edition 1 |
|
JSA JIS P 8143 |
Paper-Determination of Stiffness by Clark Stiffness Tester-Edition 1 |
|
JSA JIS P 8147 |
Method for Determining Coefficient of Friction of Paper and Board |
|
JSA JIS P 8201 |
Pulps - Sampling for Testing |
|
JSA JIS R 1501 |
General Rules of Acid Proof Porcelains for Chemical Industry |
|
JSA JIS R 1536 |
Acid and Heat Resisting Bricks for Chemical Industry |
|
JSA JIS R 1601 |
Testing Method for Flexural Strength (Modulus of Rupture) of Fine Ceramics |
|
JSA JIS R 1602 |
Testing Methods for Elastic Modulus of High Performance Ceramics |
|
JSA JIS R 1604 |
Testing Method for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature |
|
JSA JIS R 1605 |
Testing Methods for Elastic Modulus of High Performance Ceramics at Elevated Temperature |
|
JSA JIS R 1607 |
Testing Methods for Fracture Toughness of High Performance Ceramics |
|
JSA JIS R 1611 |
Testing Methods of Thermal Diffusivity, Specific Heat Capacity, and Thermal Conductivity for High Performance Ceramics by Laser Flash Method |
|
JSA JIS R 1612 |
Testing Method for Bending Creep of High Performance Ceramics |
|
JSA JIS R 1613 |
Testing Method for Wear Resistance of High Performance Ceramics by Ball-On-Disk Method |
|
JSA JIS R 1614 |
Testing Method for Corrosion of High Performance Ceramics in Acid and Alkaline Solutions; (Errata-1994) |
|
JSA JIS R 1618 |
Measuring Method of Thermal Expansion of Fine Ceramics by Thermomechanical Analysis |
|
JSA JIS R 1619 |
Testing Method for Size Distribution of Fine Ceramic Particles by Liquid Photosedimentation Method |
|
JSA JIS R 1626 |
Measuring Methods for the Specific Surface Area of Fine Ceramic Powders by Gas Adsorption Using the BET Method-Edition 1 |
|
JSA JIS R 1627 |
Testing Method for Dielectric Properties of Fine Ceramics at Microwave Frequency-Errata: 09/1997; Errata: 11/2006 |
|
JSA JIS R 1629 |
Determination of Particle Size Distributions for Fine Ceramic Raw Powders by Laser Diffraction Method |
|
JSA JIS R 2001 |
Glossary of Terms Used in Refractory |
|
JSA JIS R 2101 |
Shape and Dimension of Refractory Bricks |
|
JSA JIS R 2205 |
Testing Method for Apparent Porosity, Water Absorption and Specific Gravity of Refractory Bricks |
|
JSA JIS R 2301 |
Chrome Brick |
|
JSA JIS R 2553 |
Testing Method for Crushing Strength and Modulus of Rupture of Castable Refractories |
|
JSA JIS R 2614 |
Testing Method for Specific Gravity and True Porosity of Insulating Fire Bricks |
|
JSA JIS R 2615 |
Testing Method for Crushing Strength of Insulating Fire Bricks |
|
JSA JIS R 2655 |
Testing Method for Bulk Specific Gravity of Light Weight Castable Refractories (Method for Molded Goods) |
|
JSA JIS R 3251 |
Measuring Method of the Linear Thermal Expansion Coefficient for Low Expansion Glass by Laser Interferometry |
|
JSA JIS R 3255 |
Test Methods for Adhesion of Thin Films on Glass Substrate |
|
JSA JIS R 3301 |
Glass Beads for Traffic Paint |
|
JSA JIS R 3311 |
Ceramic Fiber Blanket |
|
JSA JIS R 3415 |
Textile Glass Tapes |
|
JSA JIS R 3419 |
Textile Glass Chopped Strands-GFA |
|
JSA JIS R 3645 |
Glass Rods |
|
JSA JIS R 7212 |
Testing Methods for Carbon Blocks |
|
JSA JIS R 9101 |
Methods for Chemical Analysis of Gypsum |
|
JSA JIS R 9111 |
Plaster of Paris Mold for Pottery |
|
JSA JIS T 9107 |
Single-use sterile surgical rubber gloves-GIA |
|
JSA JIS Z 0218 |
Gummed tape - Testing methods for adhesive strength-JPI |
|
JSA JIS Z 1511 |
Gummed Paper Tapes (for Packaging)-JPI |
|
JSA JIS Z 1525 |
Pressure sensitive adhesive polyvinyl chloride tapes for packaging-JATMA |
|
JSA JIS Z 1528 |
Pressure sensitive adhesive double coated tapes-JATMA |
|
JSA JIS Z 1538 |
Pressure Sensitive Adhesive Papers for Printing-JATMA |
|
JSA JIS Z 1702 |
Polyethylene Films for Packaging |
|
JSA JIS A 1415 |
Recommended Practice for Accelerated Artificial Exposure of Plastics Building Materials |
|
JSA JIS A 1611 |
Testing Methods for Bond Strength of Adhesives and of Installed Glue-Joints in Anchoring Wooden Block |
|
JSA JIS A 5537 |
Adhesives for Anchoring Wooden Blocks-Edition 1 |
|
JSA JIS A 5547 |
Adhesives for Plastic Foam Board-Edition 1 |
|
JSA JIS A 5905 |
Fiberboards-Errata September 2003 |
|
JSA JIS A 6301 |
Sound Absorbing Materials Edition 1 |
|
JSA JIS A 9002 |
Preservative Treatments of Woods by Pressure Processes |
|
JSA JIS A 9521 |
Rock Wool Thermal Insulating Material for Dwellings |
|
JSA JIS B 0631 |
Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Motif Parameters-ISO 12085: 1996; JSA |
|
JSA JIS B 8224 |
Testing Methods for Boiler Feed Water and Boiler Water |
|
JSA JIS C 2133 |
Testing Methods of Tubing for Electrical Insulation |
|
JSA JIS C 2141 |
Testing Methods of Ceramic Insulators for Electrical and Electronic Applications |
|
JSA JIS C 2161 |
Test Methods of Coating Powders for Electrical Insulation |
|
JSA JIS C 2250 |
General Rules for Electrical Insulating Mica Products-JEIA |
|
JSA JIS C 2262 |
Post-Impregnatable Mica Paper Materials |
|
JSA JIS C 2330 |
Polypropylene Films for Electrical Purposes |
|
JSA JIS C 2338 |
Pressure-Sensitive Adhesive Polyester Tapes for Electrical Insulation |
|
JSA JIS C 3521 |
Flame Test Method for Flame Retardant Sheath of Telecommunication Cables |
|
JSA JIS C 4003 |
Thermal Evaluation and Classification of the Electrical Insulation |
|
JSA JIS C 6471 |
Test Methods of Copper- Clad Laminates for Flexible Printed Wiring Boards |
|
JSA JIS C 6482 |
Copper-Clad Laminates for Printed Wiring Boards - Paper Base, Epoxy Resin |
|
JSA JIS C 6484 |
Base materials for printed circuits - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test)-JPCA |
|
JSA JIS C 6489 |
Base materials for printed circuits - Epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test) |
|
JSA JIS C 6492 |
Base Materials for Printed Circuits - Bismaleimide/Triazine Modified Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet of Defined Flammability (Vertical Burning Test) |
|
JSA JIS C 6493 |
Base materials for printed circuits - Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed board |
|
JSA JIS C 6494 |
Base materials for printed circuits - Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
|
JSA JIS C 7708 |
Glass Tubing for Fluorescent Lamps |
|
JSA JIS G 5528 |
Epoxy-Powder Coating for Interior of Ductile Iron Pipes and Fittings-Amendment 1: 02/20/2006 |
|
JSA JIS H 0611 |
Methods of Measurement of Thickness, Taper and Bow for Silicon Wafers |
|
JSA JIS H 1183 |
Method for Emission Spectrochemical Analysis of Silver Bullion |
|
JSA JIS H 7005 |
International Electrotechnical Vocabulary - Part 815: Superconductivity-ISTEC |
|
JSA JIS H 7804 |
Method for particle size determination in metal catalysts by electron micorscope |
|
JSA JIS H 7851 |
Testing method for heat resistance under termperature gradient |
|
JSA JIS H 8610 |
Electroplated Coatings of Zinc on Iron or Steel |
|
JSA JIS H 8622 |
Electroplated Coatings of Gold and Gold Alloy for Decorative Purposes |
|
JSA JIS H 8626 |
Electroplated Coatings of Nickel for Engineering Purposes and Electroformings of Nickel |
|
JSA JIS H 8645 |
Autocatalytic Nickel-Phosphorus Coatings on Metals |
|
JSA JIS H 8682-2 |
Test Methods for Abrasion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys Part 2: Abrasive Jet Test |
|
JSA JIS H 8689 |
Test Method for Continuity of Anodic Oxide Coatings on Aluminium and Aluminium Alloys - Copper Sulphate Test |
|
JSA JIS K 0006 |
Methane (Standard Reference Gas) |
|
JSA JIS K 0007 |
Propane (Standard Reference Gas) |
|
JSA JIS K 0058-2 |
Test methods for chemicals in slags - Part 2: Test method for acid extractable contents of chemicals |
|
JSA JIS K 0603 |
Methods for Quantitative Analysis of Immuno Globulin |
|
JSA JIS K 0604 |
Methods for Quantitative Analysis of Monoclonal IgG |
|
JSA JIS K 1102 |
Liquid Chlorine for Industrial Use - Determination of the Chlorine Content |
|
JSA JIS K 1410 |
Zinc White (Zinc Oxide) |