|
JSA JIS K 1474 |
Test Methods for Activated Carbon; Errata - 1996 |
|
JSA JIS K 2001 |
Viscosity Classification for Industrial Liquid Lubricants |
|
JSA JIS K 2209 |
Aviation Turbine Fuels |
|
JSA JIS K 2220 |
Lubricating Grease-JGI; Errata December 20, 2005 |
|
JSA JIS K 2234 |
Engine Antifreeze Coolants |
|
JSA JIS K 2276 |
Testing Methods for Aviation Fuels |
|
JSA JIS K 2503 |
Testing Methods of Lubricating Oil for Aircraft |
|
JSA JIS K 2514 |
Testing Methods for Oxidation Stability of Lubricating Oils |
|
JSA JIS K 2536 |
Liquid Petroleum Products - Testing Method of Components |
|
JSA JIS K 2537 |
Petroleum Products - Aviation Turbine Fuels and Kerosine - Determination of Smoke Point |
|
JSA JIS K 2541-2 |
Crude Oil and Petroleum Products - Determination of Sulfur Content Part 2: Oxidative Microcoulometry-PAJ |
|
JSA JIS K 2541-6 |
Crude Oil and Petroleum Products - Determination of Sulfur Content Part 6: Ultraviolet Fluorescence Method |
|
JSA JIS K 2609 |
Crude Petroleum and Petroleum Products - Determination of Nitrogen Content-Errata: March 1999 |
|
JSA JIS K 3151 |
Phosphatizing Compounds Under Painting |
|
JSA JIS K 3363 |
Testing Method for Biodegradability of Synthetic Detergent-Edition 1; Erratum - 1996 |
|
JSA JIS K 5108 |
Red Lead (Pigment) |
|
JSA JIS K 5421 |
Boiled Oil and Boiled Linseed Oil |
|
JSA JIS K 5492 |
Aluminium Paint Edition 1; (Errata - June 1996) |
|
JSA JIS K 5533 |
Lacquer Sealer |
|
JSA JIS K 5552 |
Zinc Rich Primer |
|
JSA JIS K 5554 |
Phenolic Resin Type Micaceous Iron Oxide Paint |
|
JSA JIS K 5572 |
Phthalic Resin Enamel |
|
JSA JIS K 5582 |
Vinyl Chloride Resin Enamel |
|
JSA JIS K 5600-3-2 |
Testing Methods for Paints - Part 3: Film Formability - Section 2: Surface-Drying Test (Ballotini Method)-ISO 1517: 1973 |
|
JSA JIS K 5600-3-4 |
Testing Methods for Paints - Part 3: Film Formability - Section 4: Evaluation of the Compatibility of Product with a Surface to be Painted-ISO 4627: 1981; Errata - 11/2002 |
|
JSA JIS K 5600-4-3 |
Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 3: Visual Comparison of the Colour of Paints-ISO/FDIS 3668:1998 |
|
JSA JIS K 5600-4-5 |
Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 5: Colorimetry (Measurement)-ISO 7724-2: 1984 |
|
JSA JIS K 5600-5-3 |
Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 3: Falling-Weight Test-Errata - 11/2002 |
|
JSA JIS K 5600-5-4 |
Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 4: Scratch Hardness (Pencil Method)-ISO/DIS 15184: 1996; Errata - 11/2002 |
|
JSA JIS K 5600-6-2 |
Testing Methods for Paints - Part 6: Chemical Property of Film - Section 2: Resistance to Liquids (Water Immersion Method)-ISO 2812-2: 1993 |
|
JSA JIS K 5600-7-4 |
Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 4: Humidity and Cool-Heat Cycling Test-Errata - 11/2002 |
|
JSA JIS K 5600-7-6 |
Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 6: Natural Weathering-JPMA |
|
JSA JIS K 5600-7-7 |
Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 7: Accelerated Weathering (Exposure to Filtered Xenon-Arc Radiation)-ISO 11341:1994 |
|
JSA JIS K 5600-8-6 |
Testing Methods for Paints - Part 8: Evaluation of Degradation of Paint Coatings - Section 6: Rating of Degree of Chalking-ISO 4628-6:1990 |
|
JSA JIS K 5601-1-2 |
Testing Methods for Paint Components- Part 1: General Rule- Section 2: Determination of Non-Volatile Matter-ISO 3251:1993; K 5407 corresponding to this Standard will be withdrawn and replaced with this Standard in April 2002 |
|
JSA JIS K 5601-2-3 |
Testing Methods for Paint Components- Part 2: Component Analysis in Solvent Soluble Matter- Section 3: Boiling Range |
|
JSA JIS K 5601-2-4 |
Testing Methods for Paint Components- Part 2: Component Analysis in Solvent Soluble Matter- Section 4: Alkyd Resin |
|
JSA JIS K 5633 |
Etching Primer |
|
JSA JIS K 5656 |
Polyurethane Resin Paint for Architecture |
|
JSA JIS K 5902 |
Colophonium |
|
JSA JIS K 6218-4 |
Carbon Black for Rubber Industry - Secondary Characteristics - Part 4: Determination of light Transmittance of Toluene Extract-(JRMA/JSA) |
|
JSA JIS K 6231 |
Rubber - Identification of polymers (single polymers and blends) - Pyrolytic gas chromatographic method-ISO 7270:1987; (JRMA) |
|
JSA JIS K 6264-2 |
Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance -- Part 2: Testing methods-JRMA |
|
JSA JIS K 6299 |
Rubber Test Mixes - Preparation, Mixing and Vulcanization - Equipment and Procedures |
|
JSA JIS K 6313 |
Reclaimed Rubbers |
|
JSA JIS K 6316 |
Vulcanizes Particulate Rubber |
|
JSA JIS K 6349-2 |
Wire Reinforced Rubber Hoses for Hydraulic - Part 2: Rubber Hoses and Hose Assemblies - Rubber-Covered, Spiral Wire Reinforced, Hydraulic Type - Specification |
|
JSA JIS K 6383 |
Testing Methods for Synthetic Rubber SBR |
|
JSA JIS K 6387-2 |
Latex, rubber - Determination of total solids content |
|
JSA JIS K 6401 |
Flexible Polyurethane Foam for Cushion |
|
JSA JIS K 6545 |
Testing Method for Flexing Endurance of Light Leathers and Their Surface Finishes |
|
JSA JIS K 6601 |
Man-Made Upper Material of Shoes |
|
JSA JIS K 6725 |
Testing Method for Polyvinyl Acetate |
|
JSA JIS K 6729 |
Testing Methods for Polyvinyl Formal |
|
JSA JIS K 6750 |
Tricresyl Phosphate |
|
JSA JIS K 6766 |
Testing Methods for Polyethylene Coatings on Metals |
|
JSA JIS K 6768 |
Testing Method of Wettability of Polyethylene and Polypropylene Films |
|
JSA JIS K 6774 |
Polyethylene Pipes for the Supply of Gaseous Fuels |
|
JSA JIS K 6780 |
Profile Wall Polyethylene Pipes-HIPPA/JPIF |
|
JSA JIS K 6795 |
Crosslinked Polyethylene (PE-X) Pipes - Effect of Time and Temperature on the Expected Strength-ISO 10146: 1997 |
|
JSA JIS K 6828-1 |
Plastics - Polymer dispersions - Determination of non-volatile matter (residue) at specified temperatures |
|
JSA JIS K 6851 |
Testing Methods for Strength Properties of Adhesives for Wood in Shear by Tension Loading |
|
JSA JIS K 6856 |
Testing Methods for Flexural Strength of Adhesive Bonds |
|
JSA JIS K 6858 |
Testing Methods for Resistance of Adhesive Bonds to Chemical Substances |
|
JSA JIS K 6859 |
Testing Methods for Creep Rupture of Adhesive Bonds |
|
JSA JIS K 6901 |
Testing Methods for Liquid Unsaturated Polyester Resin |
|
JSA JIS K 6915 |
Phenolic Molding Compounds Edition 1; (Errata - 1996) |
|
JSA JIS K 6917 |
Melamine-Formaldehyde Molding Compounds |
|
JSA JIS K 6918 |
Diallyl Phthalate Molding Compounds |
|
JSA JIS K 6930 |
Reclaimed Granular Molding Materials of Agricultural Polyvinyl Chloride Film |
|
JSA JIS K 7033 |
Plastics Piping Systems - Pipes Made of Glass-Reinforced Thermosetting Plastics (GRP) - Determination of Initial Longitudinal Tensile Properties-ISO/DIS 8513:1996 |
|
JSA JIS K 7034 |
Plastics Piping Systems - Pipes Made of Glass-Reinforced Thermosetting Plastics (GRP) - Determination of the Resistance to Chemical Attack for the Inside of a Section in a Deflected Condition-ISO/FDIS 10952:1997 |
|
JSA JIS K 7036 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Method to Prove the Design of Bolted Flange Joints-ISO/FDIS 8483:1997 |
|
JSA JIS K 7051 |
General Rules for Testing Methods of Glass Fiber Reinforced Plastics |
|
JSA JIS K 7072 |
Preparation of Carbon Fibre Reinforced Plastic Panels for Test Purpose |
|
JSA JIS K 7080 |
Testing Methods for Bearing Strength of Carbon Fiber Reinforced Plastics |
|
JSA JIS K 7087 |
Testing Methods for Tensile Creep of Carbon Fibre Reinforced Plastics |
|
JSA JIS K 7089 |
Testing Method for Compression After Impact Properties of Carbon Fibre Reinforced Plastics |
|
JSA JIS K 7108 |
Plastics - Determination of Environmental Stress Cracking (ESC) - Constant-Tensile-Stress Method-ISO 6252: 1992 |
|
JSA JIS K 7120 |
Testing Methods of Plastics by Thermogravimetry |
|
JSA JIS K 7123 |
Testing Methods for Specific Heat Capacity of Plastics |
|
JSA JIS K 7126-1 |
Plastics - Film and sheeting - Determination of gas-transmission rate - Part 1: Differential-pressure method |
|
JSA JIS K 7142 |
Determination of the Refractive Index of Plastics-Edition 1 |
|
JSA JIS K 7161 |
Plastics - Determination of Tensile Properties - Part 1: General Principles-ISO 527-1: 1993 |
|
JSA JIS K 7181 |
Plastics - Determination of Compressive Properties-ISO 604: 1993 |
|
JSA JIS K 7191-1 |
Plastics - Determination of Temperature of Deflection Under Load Part 1: General Test Method-ISO 75-1: 1993 |
|
JSA JIS K 7191-3 |
Plastics - Determination of Temperature of Deflection Under Load - Part 3: High-Strength Thermosetting Laminates and Long-Fibre-Reinforced Plastics-ISO 75-3: 1993 |
|
JSA JIS K 7196 |
Testing Method for Softening Temperature of Thermoplastics Film and Sheeting by Thermomechanical Analysis |
|
JSA JIS K 7204 |
Testing Method for Abrasion Resistance of Plastics by Abrasive Wheels |
|
JSA JIS K 7205 |
Testing Method for Abrasion Resistance of Plastics by Abrasive |
|
JSA JIS K 7215 |
Testing Methods for Durometer Hardness of Plastics |
|
JSA JIS K 7216 |
Testing Method for Brittleness Temperature of Plastics |
|
JSA JIS K 7220 |
Testing Method for Compressive Properties of Rigid Cellular Plastics |
|
JSA JIS K 7222 |
Methods for Determining the Apparent Density of Rigid Cellular Plastics |
|
JSA JIS K 7229 |
Determination of Chlorine in Chlorine-Containing Polymers, Copolymers and Their Compounds |
|
JSA JIS K 7232 |
Testing Methods for Specific Gravity of Epoxide Resins and Hardeners |
|
JSA JIS K 7237 |
Testing Methods for Total Amine Values of Amine-Based Hardeners of Epoxide Resins |
|
JSA JIS K 7312 |
Physical Testing Methods for Molded Products of Thermosetting Polyurethane Elastomers |
|
JSA JIS K 7350-1 |
Plastics - Methods of Exposure to Laboratory Light Sources Part 1: General Guidance-ISO 4892-1:1994 |
|
JSA JIS K 7350-3 |
Plastics - Methods of Exposure to Laboratory Light Sources Part 3: Fluorescent UV Lamps-ISO 4892-3: 1994 |
|
JSA JIS K 9003 |
Liquid Paraffin |
|
JSA JIS L 0858 |
Testing Method for Colour Fastness to Stoving |
|
JSA JIS L 0859 |
Testing Method for Colour Fastness to Bleaching with Sodium Chlorite |
|
JSA JIS L 0875 |
Testing Method for Colour Fastness to Potting |
|
JSA JIS L 1013 |
Testing Methods for Man-Made Filament Yarns |
|
JSA JIS L 1084 |
Testing Methods for Flocked Fabrics |
|
JSA JIS L 2101 |
Cotton Sewing Thread |
|
JSA JIS L 2510 |
Nylon Sewing Thread |
|
JSA JIS M 1001 |
Rules for Estimation of Ore Reserves |
|
JSA JIS M 8010 |
Measuring Methods of Quantity of Natural Gas |
|
JSA JIS M 8121 |
Methods for Determination of Copper in Ores |
|
JSA JIS M 8127 |
Methods for Determination of Tin in Ores |
|
JSA JIS M 8131 |
Methods for Determination of Molybdenum in Ores |
|
JSA JIS M 8134 |
Methods for Determination of Selenium in Ores |
|
JSA JIS M 8202 |
General Rules for Chemical Analysis of Iron Ores |
|
JSA JIS M 8216 |
Methods for Determination of Phosphorus in Iron Ores |
|
JSA JIS M 8226 |
Iron Ores - Methods for Determination of Arsenic Content |
|
JSA JIS M 8232 |
Manganese Ores - Determination of Manganese Content |
|
JSA JIS M 8239 |
Methods for Determination of Aluminium Oxide in Manganese Ores |
|
JSA JIS M 8240 |
Methods for Determination of Calcium Oxide in Manganese Ores |
|
JSA JIS M 8242 |
Methods for Determination of Copper in Manganese Ores |
|
JSA JIS M 8705 |
Iron Ores - Determination of Moisture Content of Consignment |
|
JSA JIS M 8711 |
Test Method for Determination of Shatter Strength of Iron Ore Sinter |
|
JSA JIS M 8715 |
Iron Ore Pellets - Determination of Swelling Index |
|
JSA JIS M 8718 |
Test Method for Determination of Crushing Strength of Iron Ore Pellets |
|
JSA JIS M 8814 |
Determination of Calorific Value of Coal and Coke; (Erratum) |
|
JSA JIS M 8816 |
Methods of Microscopical Measurement for the Macerals and Reflectance of Coal |
|
JSA JIS M 8853 |
Methods for Chemical Analysis of Feldspar |
|
JSA JIS P 8118 |
Testing Method for Thickness and Bulk Density of Paper and Paperboard |
|
JSA JIS P 8127 |
Testing Method for Moisture in Papers and Paperboards |
|
JSA JIS P 8131 |
Paper and Board - Determination of Bursting Strength by Mullen High-Pressure Tester |
|
JSA JIS P 8140 |
Paper and Board - Determination of Water Absorptiveness - Cobb Method |
|
JSA JIS P 8144 |
Analytical Method for Water Soluble Chlorides in Paper and Paperboard |
|
JSA JIS P 8145 |
Testing Method for Dirt in Paper and Paperboard |
|
JSA JIS P 8203 |
Method of Testing Water Content of Sample of Paper Pulp |
|
JSA JIS P 8208 |
Method of Testing Dirt, Shivers and Specks of Paper Pulp |
|
JSA JIS P 8211 |
Pulps - Determination of Kappa Number |
|
JSA JIS R 0302 |
Heat Balancing of Pottery and Refractory Firing Periodic Kiln |
|
JSA JIS R 1621 |
Testing Methods for Bending Fatigue of Fine Ceramics at Room Temperature |
|
JSA JIS R 1622 |
General Rules for the Sample Preparation of Particle Size Analysis of Fine Ceramic Raw Powder |
|
JSA JIS R 1625 |
Weibull Statistics of Strength Data for Fine Ceramics-Edition 1 |
|
JSA JIS R 1635 |
Test Methods for Visible Light Transmittance of Fine Ceramic Thin Films |
|
JSA JIS R 1668 |
Testing method for fracture toughness of porous fine ceramics |
|
JSA JIS R 2115 |
Testing Method for Permeability to Gases of Refractory Bricks |
|
JSA JIS R 2204 |
Testing Method for Refractoriness of Refractory Brick |
|
JSA JIS R 2208 |
Dense Shaped Refactory Products - Determination of Permanent Change in Dimensions on Heating |
|
JSA JIS R 2216 |
Method for X-Ray fluorescence spectrometric analysis of refractory products-TARJ |
|
JSA JIS R 2302 |
Magnesia Brick |
|
JSA JIS R 2304 |
Fireclay Brick |
|
JSA JIS R 2901 |
Chemical Analysis of Chrome Ore for Refractories |
|
JSA JIS R 3101 |
Methods for Chemical Analysis of Soda-Lime- Magnesia-Silica Glasses |
|
JSA JIS R 3102 |
Testing Method for Average Linear Thermal Expansion of Glass |
|
JSA JIS R 3420 |
Testing methods for textile glass products |
|
JSA JIS R 3421 |
Textile Finished Glass Fabrics for Bag Filter |
|
JSA JIS R 3424 |
Glass Fabrics for Membrane Structure |
|
JSA JIS R 3644 |
Glass Tubes |
|
JSA JIS R 7602 |
Testing Methods for Carbon Fibre Woven Fabrics |
|
JSA JIS T 0112 |
Prostheses - Strutural testing of hip units-ISO 15032: 2000 |
|
JSA JIS Z 0104 |
Glossary of Terms Used in Corrugated Fibreboard Industry |
|
JSA JIS Z 0701 |
Silicagel Desiccants for Packaging |
|
JSA JIS Z 1524 |
Pressure Sensitive Adhesive Cloth Tapes for Packaging-JATMA |
|
JSA JIS Z 1708 |
Sprayable and Strippable Protective Plastic Coatings |
|
JSA JIS Z 3284 |
Solder Paste |
|
JSA JIS Z 8908 |
Filter Fabrics for Dust Collection |
|
JSA JIS A 1612 |
Testing Methods for Bond Strength of Adhesives and of Installed Glue-Joints in Wall and Ceiling Boards-Replaces JIS A 1613 |
|
JSA JIS A 6922 |
Adhesives for Wall Paper and Wall Coverings for Decorative Finish |
|
JSA JIS A 9511 |
Preformed Cellular Plastics Thermal Insulation Materials-JTIA |
|
JSA JIS A 9526 |
Spray-applied rigid polyurethane foam for thermal insulation-JUFA, JPIF |
|
JSA JIS B 0632 |
Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Metrological Characteristics of Phase Correct Filters-ISO 11562: 1996 |
|
JSA JIS B 5115 |
Guided Support Pins of Moulds for Plastics |
|
JSA JIS B 7995 |
Automatic Analyzers for Sulphur in Crude Oil and Petroleum Products |
|
JSA JIS B 8392-5 |
Compressed Air - Part 5: Test Methods for Oil Vapour and Organic Solvent Content-JFPA |
|
JSA JIS B 9931 |
Fluid Contamination - Determination of Contaminants by the Gravimetric Method |
|
JSA JIS C 0066 |
Flammability of solid non-metallic materials when exposed to flame sources - list of test methods-IEC 60707: 1999; RCJ |
|
JSA JIS C 0072 |
Fire Hazard Testing Part 2: Test Methods - Section 1/Sheet 0: Glow-Wire Test Methods - General-IEC 60695-2-1/0: 1994; Replaces JIS C 0060: 1993 |
|
JSA JIS C 2103 |
Testing Methods of Varnishes for Electrical Insulation-Replaces C 2110; C 2111 |
|
JSA JIS C 2105 |
Testing Methods of Solventless Liquid Resins for Electrical Insulation |
|
JSA JIS C 2220 |
Mica Paper |
|
JSA JIS C 2255 |
Flexible Mica Materials |
|
JSA JIS C 2303 |
Insulating Tissue Papers |
|
JSA JIS C 2305 |
Pressboard for Electrical Purposes |
|
JSA JIS C 2307 |
Insulating Papers for Electric Power Cables |
|
JSA JIS C 2336 |
Pressure-Sensitive Adhesive Polyvinyl Chloride Tapes for Electrical Purposes |
|
JSA JIS C 3301 |
Rubber Insulated Flexible Cords-JCMA |
|
JSA JIS C 6472 |
Copper-Clad Laminates for Flexible Printed Wiring Boards (Polyester Film, Polyimide Film) |
|
JSA JIS C 6490 |
Base Materials for Printed Circuits - Polyimide Woven Glass Fabric Copper-Clad Laminated Sheet of Defined Flammability (Vertical Burning Test) |
|
JSA JIS C 6520 |
General Rules of Prepreg for Multilayer Printed Wiring Boards |
|
JSA JIS C 6521 |
Test Methods of Prepreg for Multilayer Printed Wiring Boards Edition 1 |
|
JSA JIS H 0601 |
Testing Methods of Resistivity for Germanium |
|
JSA JIS H 0604 |
Measurement of Minority- Carrier Lifetime in Silicon Single Crystal by Photoconductive Decay Method |
|
JSA JIS H 0607 |
Determination of Conductivity Type in Germanium by Thermoelectromotive Method |
|
JSA JIS H 2108 |
Tin Metal-Edition 1 |
|
JSA JIS H 2120 |
Classification of magnesium and magnesium alloy scraps |
|
JSA JIS H 6311 |
Methods for Determination of Silver in Silver Jewellery Alloys-Edition 1 |
|
JSA JIS H 7002 |
Glossary of Terms Used in Damping Materials |
|
JSA JIS H 7803 |
General rules for the determination of particle size and crystallite size in metal catalysts |
|
JSA JIS H 8401 |
Methods of Thickness Measurement for Sprayed Coatings |
|
JSA JIS H 8504 |
Methods of Adhesion Test for Metallic Coatings |
|
JSA JIS H 8623 |
Electroplated Coatings of Silver for Decorative Purposes |
|
JSA JIS H 8646 |
Electroless Copper Platings |
|
JSA JIS H 8679-2 |
Evaluation Methods for Pitting Corrosion of Anodic Oxide Coatings on Aluminium and Aluminium Alloys - Part 2: Grid Method |
|
JSA JIS H 8680-1 |
Test Methods for Thickness of Anodic Oxide Coatings on Aluminium and Aluminium Alloys Part 1: Microscopical Method |
|
JSA JIS H 8681-1 |
Test Methods for Corrosion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys- Part 1: Alkali Resistance Test |
|
JSA JIS H 8682-1 |
Test Methods for Abrasion Resistance of Anodic Oxide Coatings on Aluminium and Aluminium Alloys - Part 1: Wheel Wear Test |
|
JSA JIS K 0003 |
Carbon Dioxide (Standard Reference Gas) |
|
JSA JIS K 0552 |
Testing methods for electric conductivity in highly purified water |
|
JSA JIS K 1101 |
Oxygen-JIGA |
|
JSA JIS K 1464 |
Desiccants, Activated for Industrial Dehumidification |
|
JSA JIS K 2219 AMD 1 |
Gear Oils |
|
JSA JIS K 2236 |
Polish for Automobiles |
|
JSA JIS K 2242 |
Heat Treating Oils-JMFA |
|
JSA JIS K 2261 |
Petroleum Products - Motor Gasoline and Aviation Fuels - Determination of Existent Gum - Jet Evaporation Method |
|
JSA JIS K 2272 |
Crude Oil and Petroleum Products - Determination of Ash and Sulfated Ash |
|
JSA JIS K 2280 |
Testing Methods for Octane Number and Cetane Number |
|
JSA JIS K 2283 |
Testing Methods for Kinematic Viscosity and Calculating Method for Viscosity Index of Crude Oil and Petroleum Products |
|
JSA JIS K 2399 |
Road Vehicles - Antifogging Agent-JACA |
|
JSA JIS K 2420 |
Method of Sampling for Aromatic Hydrocarbons and Tar Products |
|
JSA JIS K 2439 |
Creosote Oil - Prepared Tar - Tar Pitch |
|
JSA JIS K 2510 |
Lubricants - Determination of Rust-Preventing Characteristics |
|
JSA JIS K 2518 |
Petroleum Products - Lubricating Oils - Determination of Foaming Characteristics |
|
JSA JIS K 2520 |
Petroleum Products - Lubricating Oils - Determination of Demulsibility Characteristics |
|
JSA JIS K 2540 |
Testing Method for Thermal Stability of Lubricating Oils |
|
JSA JIS K 2541-5 |
Crude Oil and Petroleum Products - Determination of Sulfur Content Part 5: General Bomb Method |
|
JSA JIS K 2541-7 |
Crude Oil and Petroleum Products - Determination of Sulfur Content Part 7: Wavelength-Dispersive X-Ray Fluorescence Method |
|
JSA JIS K 2580 |
Testing Methods for Color of Petroleum Products |
|
JSA JIS K 3331 |
Hardened Oils and Fatty Acids for Industrial Use |
|
JSA JIS K 5102 |
Zinc Oxide (Pigment) |
|
JSA JIS K 5112 |
Ultramarine Blue (Pigment) |
|
JSA JIS K 5116 |
Titanium Dioxide (Pigment) |
|
JSA JIS K 5511 |
Ready Mixed Paints |
|
JSA JIS K 5538 |
Lacquer Thinner |
|
JSA JIS K 5551 |
Epoxy Resin Paint |
|
JSA JIS K 5553 |
High Build Type Zinc Rich Paint |
|
JSA JIS K 5562 |
Phthalic Resin Varnish |
|
JSA JIS K 5581 |
Vinyl Chloride Resin Varnish |
|
JSA JIS K 5591 |
Oleoresinous Undercoats |
|
JSA JIS K 5600-3-1 |
Testing Methods for Paints - Part 3: Film Formability - Section 1: Assessment of Natural Spreading Rate (Brush Application)-ISO 7254: 1984 |
|
JSA JIS K 5600-3-5 |
Testing Methods for Paints - Part 3: Film Formability - Section 5: Pressure Test for Stackability-ISO 4622: 1992 |
|
JSA JIS K 5600-4-4 |
Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 4: Colorimetry (Principles)-ISO 7724-1: 1984 |
|
JSA JIS K 5600-5-1 |
Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 1: Bend Test (Cylindrical Mandrel)-ISO 1519: 1973 |
|
JSA JIS K 5600-5-11 |
Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 11: Washability-ISO/DIS 11998: 1996 |
|
JSA JIS K 5600-5-5 |
Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 5: Scratch Hardness (Stylus Method)-ISO 1518: 1992 |
|
JSA JIS K 5600-5-9 |
Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 9: Abrasion Resistance (Rotating Abrasive Rubber Wheel Method)-ISO 7784-2: 1997 |
|
JSA JIS K 5600-7-1 |
Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 1: Resistance to Neutral Spray-ISO 7253: 1984; Errata - 11/2002 |
|
JSA JIS K 5601-3-1 |
Testing Methods for Paint Components- Part 3: Component Analysis in Solvent Insoluble Matter- Section 1: Total Leads (Flame Atomic Absorption Spectrometric Method) |
|
JSA JIS K 5601-4-1 |
Testing Methods for Paint Components - Part 4: Analysis for Components Emitted from Film - Section 1: Formaldehyde-JPMA |
|
JSA JIS K 5621 |
Anticorrosive Paint for General Use |
|
JSA JIS K 5623 |
Lead Suboxide Anticorrosive Paint |
|
JSA JIS K 5624 |
Basic Lead Chromate Anticorrosive Paint |
|
JSA JIS K 5653 |
Acrylic Resin Varnish-JPMA |
|
JSA JIS K 5657 |
Polyurethane Resin Paint for Steel Structures |
|
JSA JIS K 5664 |
Tar Epoxy Resin Paint |
|
JSA JIS K 5673 |
Fluorescent Paint for Safety Colour |
|
JSA JIS K 5906 |
Aluminium Pigments for Paints |
|
JSA JIS K 5909 |
Shellac |
|
JSA JIS K 6218-2 |
Carbon black for rubber industry - Secondary characteristics - Part 2: Determination of ash-JRMA |
|
JSA JIS K 6219-3 |
Carbon black for rubber industry - Characteristics of pelletized carbon black - Part 3: Determination of individual pellet crushing strength-JRMA |
|
JSA JIS K 6249 |
Testing Methods for Uncured and Cured Silicone Rubber-JRMA |
|
JSA JIS K 6261 |
Rubber, Vulcanized or Thermoplastic - Determination of Low Temperature Properties |
|
JSA JIS K 6330-10 |
Testing Methods for Rubber and Plastics Hoses - Part 10: Determination of Tranmission of Liquids Through Hose Walls |
|
JSA JIS K 6349-1 |
Wire Reinforced Rubber Hoses for Hydraulic - Part 1: Rubber Hoses and Hose Assemblies - Wire-Reinforced Hydraulic Type - Specification |
|
JSA JIS K 6352 |
Natural Rubber (NR) - Evaluation Procedure |
|
JSA JIS K 6387-1 |
Rubber latex - Part 1: Sampling-ISO 123: 2001 |
|
JSA JIS K 6396 |
Isobutene-Isoprene Rubber (IIR) - Evaluation Procedures |
|
JSA JIS K 6398 |
Rubber, Butadiene (BR) - Solution-Polymerized Types - Evaluation Procedure |
|
JSA JIS K 6399 |
Isoprene Rubber (IR) - Non-Oil-Extended, Solution-Polymerized Types - Evaluation Procedure |
|
JSA JIS K 6547 |
Testing Method for Color Fastness to Rubbing of Leather |
|
JSA JIS K 6726 |
Testing Methods for Polyvinyl Alcohol |
|
JSA JIS K 6745 |
Rigid Polyvinyl Chloride Plates |
|
JSA JIS K 6761 |
Polyethylene Pipes for General Purposes-JPEPIA, JPIF |
|
JSA JIS K 6850 |
Testing Methods for Strength Properties of Adhesives in Shear by Tension Loading |
|
JSA JIS K 6852 |
Testing Methods for Shear Strength of Adhesive Bonds by Compression Loading |
|
JSA JIS K 6853 |
Testing Methods for Cleavage Strength of Adhesive Bonds |
|
JSA JIS K 6891 |
Testing Methods for Polytetrafluoroethylene Molding Powder |
|
JSA JIS K 6896 |
Polytetrafluoroethylene Powder for Molding and Extrusion Materials |
|
JSA JIS K 6900 |
Glossary of Terms Used in Plastic Industry |
|
JSA JIS K 6919 |
Liquid Unsaturated Polyester Resins for Fiber Reinforced Plastics |
|
JSA JIS K 6950 |
Plastics - Testing Method for Aerobic Biodegradability by Activated Sludge |
|
JSA JIS K 7014 |
Fittings and Joints for Fibre Reinforced Plastic Pipes |
|
JSA JIS K 7015 |
Pultruded Fibre Reinforced Plastics |
|
JSA JIS K 7030 |
Pipes and Fittings Made of Glass Fiber Reinforced Thermosetting Plastics (GRP) - Definitions of Terms Relating Pressure, Including Relationships Between Them, and Terms for Installation and Jointing-ISO 8572: 1991 |
|
JSA JIS K 7032 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Initial Specific Ring Stiffness-JRPS |
|
JSA JIS K 7042 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes and Fittings - Test Methods to Prove the Design of Cemented or Wrapped Rigid Joints-ISO/FDIS 8533: 1997 |
|
JSA JIS K 7057 |
Testing Method for Apparent Interlaminar Shear Strength of Glass Fiber Reinforced Plastics |
|
JSA JIS K 7091 |
Testing Method for Radiography of Carbon Fibre Reinforced Plastic Panels |
|
JSA JIS K 7092 |
Testing Method for interlaminar shear strength of carbon fibre reinforced plastic by double-notch specimen-JCMA/JPIF |
|
JSA JIS K 7101 |
Testing Method for Colour Fastness of Plastics Under Window Glass upon Exposure to Daylight |
|
JSA JIS K 7107 |
Testing Methods for Chemical Resistance of Plastics Under Constant Tensile Deformation |
|
JSA JIS K 7110 |
Method of Izod Impact Test for Rigid Plastics |
|
JSA JIS K 7114 |
Testing Method for Evaluation of the Resistance of Plastics to Chemical Substances |
|
JSA JIS K 7127 |
Testing Method for Tensile Properties of Plastic Films and Sheets |
|
JSA JIS K 7128-2 |
Plastics - Film and Sheeting - Determination of Tear Resistance - Part 2: Elmendorf Method-ISO 6383-2: 1983 |
|
JSA JIS K 7139 |
Plastics-Multipurpose test specimens |
|
JSA JIS K 7191-2 |
Plastics - Determination of Temperature of Deflection Under Load - Part 2: Plastics and Ebonite-ISO 75-2: 1993 |
|
JSA JIS K 7195 |
Testing Method for Heat Sag of Plastics |
|
JSA JIS K 7199 |
Testing Method for Flow Properties of Thermoplastics with a Capillary Rheometer |
|
JSA JIS K 7206 |
Testing Method for Vicat Softening Temperature of Thermoplastics |
|
JSA JIS K 7219 |
Plastics - Methods of exposure to direct Weathering, to Weathering Using Glass-Filtered Daylight, and to Intensified Weathering by Daylight Using Fresnel Mirrors-ISO 877: 1994 |
|
JSA JIS K 7223 |
Testing Method for Water Absorption Capacity of Super Absorbent Polymers-Errata: December 1997 |
|
JSA JIS K 7226 |
Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat-ISO 2578:1993 |