|
NFPA B93.10 |
Static Pressure Rating Methods of Square Head Fluid Power Cylinders (NFPA T3.6.5) |
|
NFPA B93.3 |
Fluid Power Systems and Products - Cylinder Bores and Piston Rod Diameters - Inch Series-First Edition; Revision and Redesignation of NFPA/T3.6.1 R1- 1983 |
|
NFPA B93.32M |
Groove Dimensions for Fluid Power Radial Compression Type Piston Rings-Revision and Redesignation of NFPA/T3.19.18-1973 |
|
NFPA B93.35M |
Cavity Dimensions for Fluid Power Exclusion Devices (Inch Series)-Revision and Redesignation of NFPA/T3.19.7 R1-1976 |
|
NFPA B93.36 |
Groove Dimensions for Floating Type Metallic and Non-Metallic Fluid Power Piston Rings-Revision and Redesignation of NFPA/T3.19.11-1972 |
|
NFPA B93.46 |
Method of Determining the Pore Size of a Cleanable Surface Type Hydraulic Fluid Power Filter Element; Appendix-First Edition; Revision and Redesignation of (NFPA) T3.10.8.12-1976 |
|
NFPA B93.51M |
Pneumatic Fluid Power - Quick Action Couplings - Test Conditions and Procedures-Revision and Redesignation of NFPA/3.20.3 R1-1979 |
|
NFPA B93.62M |
Hydraulic Fluid Power - Reciprocating Dynamic Sealing Devices in Linear Actuators - Method of Testing, Measuring and Reporting Leakage-Revision and Redesignation of NFPA/T3.19.12M-1981 |
|
NFPA B93.8 |
Bore and Rod Size Combinations and Rod End Configurations for Cataloged Square Head Industrial Fluid Power Cylinders (NFPA T3.5.2)-Revision and Redesignation of NFPA/T3.6.4-1967 |
|
NFPA B93.9 |
Symbols for Marking Electrical Leads and Ports on Fluid Power Valves-Revision and Redesignation of NFPA/T3.5.2-1968; Supersedes T3.5.2: 09/05/69 |
|
NFPA T1.4.2 R3 |
Style Guide for the Presentation of NFPA Recommended Standards, Practices, Information Reports and Bibliographies |
|
NFPA T1.4.5 R3 |
Technical Committee Handbook |
|
NFPA T2.12.1 R1 |
Hydraulic Fluid Power - Systems and Products - Method of Measuring Average Steady-State Pressure-Second Edition |
|
NFPA T2.12.10 R1 |
Recommended Practice - Hydraulic Fluid Power - Systems and Products - Testing General Measurement Principles and Techniques-Second Edition |
|
NFPA T2.12.11- 1 |
Fluid Power Systems and Components - Reliability Analysis, Reporting Format and Database Compilation-First Edition |
|
NFPA T2.12.2 |
Hydraulic Fluid Power - Systems and Products - Method of Reporting Traceability of Measurements-First Edition |
|
NFPA T2.13.1 R3 |
Recommended Practice - Hydraulic Fluid Power - Use of Fire-Resistant Fluids in Industrial Systems-Fourth Edition; Revision and Redesignation of ANSI/B93.5- 1979 |
|
NFPA T2.13.13 |
Recommended Practice - Hydraulic Fluid Power - Fluids - Viscosity Selection Criteria for Hydraulic Motors and Pumps-First Edition |
|
NFPA T2.13.2 R4 |
Hydraulic Fluid Power - Fire Resistant Fluids - Information Report on Company Trade Names-Fifth Edition |
|
NFPA T2.13.3 R3 |
Information Report - Bibliography - Hydraulic Fluid Power - Non- Proprietary Hydraulic Fluid Specifications and Selected Recommended Practices-Fourth Edition |
|
NFPA T2.13.4 |
Information Report - Recommendations for Conservation, Maintenance, and Disposal of Hydraulic Fluids-First Edition |
|
NFPA T2.13.5 |
Hydraulic Fluid Power - Industrial Systems - Practice for the Use of High Water Content Fluids-First Edition |
|
NFPA T2.13.7 R1 |
Hydraulic fluid power - Petroleum fluids - Prediction of bulk moduli- Second Edition; ANSI B93.63-1984 |
|
NFPA T2.13.8 |
Hydraulic Fluid Power - Fire Resistant Fluids - Definitions, Classifications, and Testing-First Edition |
|
NFPA T2.24.1 R1 |
Hydraulic Fluid Power - Systems Standard for Stationary Industrial Machinery Supplement to ISO 4413; 1998 - Hydraulic Fluid Power - General Rules Relating to Systems-Second Edition; to be Used in Conjunction with ISO 4413: 1998 |
|
NFPA T2.24.2 |
Hydraulic Fluid Power Systems - Methods to Improve Sealing Reliability-First Edition |
|
NFPA T2.25.1 R2 |
Pneumatic fluid power Systems standard for industrial machinery Supplement to ISO 4414:1998 Pneumatic fluid power General rules relating to systems - Must be used in conjunction with ISO 4414:1998-Third Edition |
|
NFPA T2.30.1 |
Guide for Selection of Fluid Power Pressure Transducers |
|
NFPA T2.30.4 R1 |
NFPA RECOMMENDED PRACTICE GUIDE FOR SELECTION OF FLUID POWER POSITION TRANSDUCERS |
|
NFPA T2.30.6 |
Hydraulic Fluid Power - Electrical Connectors for Use with Industrial Hydraulic Integrated Proportional Valves - Dimensions and Requirements-First Edition |
|
NFPA T2.6.1 R2 |
Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component-Third Edition; Revision of NFPA/T2.6.1 R1-1991; Supersedes T2.6.1M P1 S8: 07/25/75; |
|
NFPA T2.9.11 R1 |
Hydraulic Fluid Power - Method for Determining the Particulate Count of an Oil Sample (Using Liquid Automatic Counters)-Second Edition; Revision and Redesignation of ANSI/(NFPA) T2.9.11-1989 |
|
NFPA T2.9.16 |
Information report Hydraulic fluid power - Determination of particulate contaminant level using automatic optical particle counters-First Edition |
|
NFPA T3.10.17 |
Finite Life Hydraulic Filter Pressure/Life Rating - Method for Verifying the Fatigue Life Rating and the Burst Pressure Rating of the Pressure Containing Envelope of a Spin-on Hydraulic Filter First Edition |
|
NFPA T3.10.4 R1 |
Hydraulic fluid power Filters and separators Graphic symbols supplement-Second Edition |
|
NFPA T3.10.5.1 R2 |
Hydraulic Filter/Separator Housing - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Hydrau |
|
NFPA T3.10.8.7 R1 |
Hydraulic Fluid Power - Filter Elements - Method for Verifying Flow Fatigue Characteristics-Second Edition; Revision and Redesignation of ANSI/B93.24- 1972 |
|
NFPA T3.12.10 R2 |
Air Line Filter, Regulator and/or Lubricator - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Po |
|
NFPA T3.12.17 |
Recommended Practice - Pneumatic Fluid Power - Filters, Regulators and Lubricators - Application Guideline-First Edition |
|
NFPA T3.12.9 R2 |
Pneumatic fluid power Bibliography Filter, regulator and lubricator (FRL) standards-Third Edition |
|
NFPA T3.19.22 R2 |
Information report - Hydraulic fluid power - Bibliography - Sealing devices standards-Third Edition |
|
NFPA T3.19.25 R1 |
Information Report - Fluid power systems - Sealing devices - Storage, handling and installation of elastomeric seals and exclusion devices-Second Edition |
|
NFPA T3.19.32 |
Rotary shaft lip type seals - Part 2: Vocabulary (Technically identical to ISO 6194-2:1991).-First Edition |
|
NFPA T3.20.1 R1 |
Fluid Power Systems - Quick-Action Couplings - Glossary-Second Edition |
|
NFPA T3.20.14 |
Pneumatic Quick-Action Couplings - Plug Dimensions-First Edition |
|
NFPA T3.20.15 |
Hydraulic fluid power Quick-action coupling Flush face type-First Edition |
|
NFPA T3.20.8 R2 |
Quick-Action Coupling - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Rating of the Pressure Containing Envelope of a Metal Fluid Power Quick- Action Couplin |
|
NFPA T3.21.16 |
Pneumatic Fluid Power - Labeling and Communication of Pneumatic Products-First Edition |
|
NFPA T3.21.18 |
Pneumatic Fluid Power - Recommended Practice for Calibration and Use of Flowmeters-First Edition |
|
NFPA T3.21.3 |
Pneumatic Fluid Power - Flow Rating Test Procedure and Reporting Method - for Fixed Orifice Components-First Edition |
|
NFPA T3.21.4 R2 |
Pneumatic Valve - Pressure Rating Supplement to NFPA/T2.6.1 R2- 2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Pneumatic Valve-Supersede |
|
NFPA T3.21.5 R2 |
Pneumatic Fluid Power - Bibliography - Valve Standards-Third Edition |
|
NFPA T3.21.8 |
Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves First Edition |
|
NFPA T3.28.9 R1 |
Fluid Power Systems and Products - Moving Parts Fluid Controls - Method of Diagramming-Second Edition; Revision and Redesignation of ANSI/B93.38- 1976 |
|
NFPA T3.29.2 R2 |
Pressure Switch - Pressure Rating Supplement to NFPA/T2.6.1 R2- 2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Pressure Switch-Third Edi |
|
NFPA T3.4.7 R2 |
Accumulator - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Accumulator- Third Edition |
|
NFPA T3.4.8 R2 |
Quick-Action Coupling - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Rating of the Pressure Containing Envelope of a Metal Fluid Power Quick- Action Couplin |
|
NFPA T3.4.9 |
Recommended Practice - Hydraulic Fluid Power - Application Guidelines for Accumulators-First Edition |
|
NFPA T3.5.1 R2 |
Hydraulic Fluid Power - Valves - Mounting Surfaces-Third Edition; Revision of ANSI/B93.7M-1986; Supersedes B93.7M: 04/19/70 |
|
NFPA T3.5.14 R1 |
Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics-Second Edition; Revision and Redesignation of ANSI/B93.66M-1983 |
|
NFPA T3.5.15M |
Hydraulic fluid power Valves Method for determining the internal leakage characteristics-First Edition |
|
NFPA T3.5.16 |
Hydraulic fluid power Flow control valves Method for measuring and reporting regulating characteristics-First Edition |
|
NFPA T3.5.24 |
Hydraulic Fluid Power - Pressure Relief Valves - Method of Testing and Presenting Basic Performance Data |
|
NFPA T3.5.26 R2 |
Hydraulic Valve - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Hydraulic Valve- Third Edi |
|
NFPA T3.5.28 R1 |
Hydraulic Fluid Power - Valves - Pressure Differential-Flow Characteristic - Method of Measuring and Reporting-Second Edition; Revision and Redesignation of ANSI/B93.49M-1980 |
|
NFPA T3.5.29 R1 |
Fluid power systems and components Electrically-controlled industrial valves Interface dimensions for electrical connectors-Second Edition; Revision of ANSI/B93.55M-1981 |
|
NFPA T3.5.49 |
Recommended Practice - Hydraulic Fluid Power - Application Guidelines for Hydraulic Valves-First Edition |
|
NFPA T3.6.11 R1 |
Fluid Power Systems and Components - Cylinders Bore and Rod Size Combinations - Rod End Configurations, Dimensional Identification Code - Mounting Dimensions for Bore Sizes Less Than 1 1/2 Inch Bore Cataloged Square Head Tie Rod Type- Second Edition; Revis |
|
NFPA T3.6.29 R2 |
Tie Rod or Bolted Cylinder - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Metal Pressure Containing Envelope of a Tie Rod or Bolted Cylinder |
|
NFPA T3.6.31 R2 |
Telescopic Cylinders and Cylinders of Nonbolted End Construction - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Metal Pressure Containing En |
|
NFPA T3.6.36 R2 |
Information Report - Fluid power - Bibliography - Cylinders-Fourth Edition |
|
NFPA T3.6.37 |
Hydraulic Fluid Power - Cylinders - Method for Determining the Buckling Load |
|
NFPA T3.6.54 R1 |
Hydraulic Fluid Power - Cylinder Ports - SAE Straight Thread O-Ring and Four-Bolt Flange Ports - ISO Straight Thread O-Ring and Four-Bolt Flange Ports - Heavy Duty and Light Duty Square Head Tie Rod Cylinders-Second Edition; Revision and Redesignation to |
|
NFPA T3.6.59 |
Hydraulic Fluid Power - Cylinders - Cushion Performance |
|
NFPA T3.6.64 |
Recommended Practice for Application Guidelines of Cylinders-First Edition |
|
NFPA T3.6.7 R2 |
Fluid Power Systems and Products - Square Head Industrial Cylinders - Mounting Dimensions-Third Edition; Revision and Redesignation of ANSI/B93.15-1981 |
|
NFPA T3.6.8 R2 |
Fluid power systems Cylinders Dimensions for accessories for cataloged square head industrial types-Third Edition |
|
NFPA T3.8.11 R1 |
Fluid power Bibliography Connectors and conductors-Second Edition |
|
NFPA T3.9.13 |
Hydraulic Fluid Power - Pumps and Motors - Glossary-First Edition |
|
NFPA T3.9.17 R2 |
Hydraulic Fluid Power - Positive Displacement Pumps, Motors and Integral Transmissions - Method of Testing and Presenting Basic Performance Data-Third Edition; Revision of ANSI/(NFPA)T3.9.17 R1-1990 |
|
NFPA T3.9.22 R2 |
Pump/Motor - Pressure Rating Supplement to NFPA/T2.6.1 R2-2000, Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Pump and Motor-Third Edition |
|
NFPA T3.9.33 |
Hydraulic Fluid Power - Pumps - Method of Testing and Presenting Basic Performance Data for Load Sensing Pumps-First Edition |