SAE AS 8879D

Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter

SAE AS 5202A

PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD-FSC 4730; Supersedes SAE AS 33649A

SAE AS 9100B

Quality Management Systems - Aerospace - Requirements-Technically Equivalent to AECMA prEN 9100

SAE AS 4395B

(R) FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD

SAE AS 478N

Identification Marking Methods

SAE AS 5174D

FITTING, UNION AND REDUCER, FLARED

SAE AS 25036A

(R) TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)

SAE AS 21919

CLAMP, LOOP TYPE, CUSHIONED SUPPORT-FSC 5340

SAE AS 568B

Aerospace Size Standard for O-Rings

SAE AS 50881C

Wiring Aerospace Vehicle

SAE AS 9102A

(R) Aerospace First Article Inspection Requirement-Technically Equivalent to AECMA prEN 9102

SAE AS 22759A

(R) Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy

SAE AS 33514A

Fitting End, Standard Dimensions for Flareless Tube Connection and Gasket Seal

SAE AS 85049B

(R) Connector Accessories, Electrical General Specification For

SAE AS 28775

Packing, Preformed, Hydraulic, +275 Degrees F (

SAE AS 3209

Packing, Preformed - AMS 7276, 'O' Ring-

SAE AS 33671D

(R) STRAP, TIEDOWN, ELECTRICAL COMPONENTS, ADJUSTABLE, SELF-CLINCHING, PLASTIC, TYPE I, CLASS 1

SAE AS 39029A

(R) Contacts, Electrical Connector, General Specification for

SAE AS 5178A

NUT, FITTING, BULKHEAD

SAE AS 21902B

(R) UNION, FLARELESS TUBE

SAE AS 5169

Fitting, Port Plug and Bleeder-FSC 4730

SAE AS 22759/11

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED COPPER CONDUCTOR, 600 VOLT

SAE AS 7928

Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification for-FSC 5940; Should Be Used Instead of MIL-T-7928G, Which Was Cancelled on 31 August 1999; Amendment 1 - September 2004

SAE AS 9390B

(R) Pin, Straight, Headless, Dowel - CRES, UNS S66286, Standard and Oversize

SAE AS 29513

Packing, Preformed, Hydocarbon Fuel Resistant,

SAE ARP 5316B

Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly

SAE AS 4841

Fittings, 37 Degree Flared, Fluid Connection

SAE AS 5176B

FITTING, SLEEVE, FLARED

SAE AS 20659B

(R) TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS 1, FOR 175 °C TOTAL CONDUCTOR TEMPERATURE

SAE AS 9556C

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS 5131

Tube End - Beaded, Design Standard

SAE AS 3208

Packing, Preformed - AMS 7276 - Seal-

SAE AS 14101B

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, GROOVED RACE, -65 TO 325 °F-FSC 3120

SAE AS 28778

Packing, Preformed, Straight Thread Tube Fitting Boss-FSC 5331

SAE AS 39029/1A-A1

Contacts, Electrical Connector, Pin, Crimp Removable (for AS81714 Terminal Junction System)

SAE AS 27212

Terminal Board Assembly, Molded-In-Stud, Electric-FSC 5940; Should Be Used Instead of MS27212, which Was Cancelled on 31 August, 1998

SAE AS 1038E

FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED

SAE AS 14103C

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED RACE, -65 TO 325 °F-FSC 3120

SAE AS 21924B

(R) UNION, FLARELESS TUBE, BULKHEAD AND UNIVERSAL

SAE AS 83519/2

SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT WITH PRE INSTALLED LEADS FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I)-FSC 5940; Should Be Used Instead of MIL-S-83519/2 Which Was Inactivated for New Design on August 31, 1998

SAE AS 5272C

Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification

SAE AS 83519/1

SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I)-FSC 5940; Should Be Used for New Design Instead of MIL-S-83519/1, which Was Inactivated for New Design on August 31, 1998

SAE AS 21916C

REDUCER, EXTERNAL THREAD, FLARELESS TUBE

SAE AS 20253

Pin, Hinge-FSC 5315

SAE AS 85049/38A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-Amendment 1:11/2006; FSC 5935

SAE AS 18280B

(R) Fittings, 24 degrees Cone Flareless, Fluid Connection, 3000 psi

SAE AS 85049/52A

Connector Accessories, Electrical, Strain Relief, Nonenvironmental, Straight, Self-Locking and Non Self-Locking Category 4B (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series III Connectors)-Amendment 3 - November 2006

SAE AS 4716A

(R) Gland Design, O-ring and Other Elastomeric Seals

SAE AS 39029/58

Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-C-24308, MIL-C-38999 Series I, II, III, and IV, and MIL-C-55302/69 and MIL-C-83733 Connectors)-FSC 5935

SAE AS 4396B

(R) FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD

SAE AS 9557C

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A

SAE AS 3580

Bolt, Machine - Double Hex Head, PD Shank, UNS N07718 - 185 ksi-FSC 5306

SAE AS 4059E

(R) Aerospace Fluid Power - Cleanliness Classification for Hydraulic Fluids

SAE AS 9101C

Quality Management Systems Assessment-Technically Equivalent to ASD-STAN prEN 9101

SAE AS 7788

Panels, Information, Integrally Illuminated-FSC 6220; Should Be Used Instead of MIL-P-7788F(1), Which Was Cancelled on 13 September 1999

SAE AS 5194B

FITTING, ADAPTER, STRAIGHT PIPE TO FLARED

SAE AS 15001B

FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, STEEL, TYPE I

SAE AS 3237B

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A

SAE AS 5406C

FITTING, UNION, TUBE, .375 BULKHEAD-FSC 4730; Should Be Used Instead of AN832 and MS24393 That Were Cancelled on 11 February 2000

SAE AS 85049/95A

Connector Accessories, Electrical, Mounting Device, Flange Type, Category 7, 3/4 Perimeter-FSC 5935; Amendment 2 - June 2006

SAE AS 5440

Hydraulic Systems, Aircraft, Design and Installation Requirements for-FSC 1650; Should Be Used Instead of MIL-H-5440H, Which Was Cancelled on 13 September 1999

SAE AS 8791/1B

Retainer, Packing, Hydraulic and Pneumatic, Polytetrafluoroethylene, Single Turn

SAE AS 8791A

(R) Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin

SAE AS 21914B

(R) CAP, PRESSURE SEAL, FLARELESS TUBE FITTING

SAE AS 3582

Packing, Preformed - O-Ring Seal AMS 3304-FSC 5330

SAE AS 33515A

FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS

SAE AS 85049/48A-A1

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 7 (FOR MIL-DTL-24308 CONNECTORS)

SAE AS 81935/1

Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Externally Threaded, -65 Degrees F to +325 Degrees F-FSC 3120

SAE AS 22759/34

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, TIN-COATED COPPER, 150°C, 600 VOLT

SAE AS 1895/1D

Coupling, V-Retainer, Single Latch, Type I Standard Profile

SAE AS 4375C

FITTING END, FLARELESS, DESIGN STANDARD

SAE AS 4330

TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD-FSC 4730

SAE AS 1300C

PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR

SAE AS 23190

Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support-FSC 5975; Amendment 2 - January 2006

SAE AS 39029/56

Contacts, Electrical Connector, Socket, Crimp Removable, (for MIL-C-38999 Series I, III, and IV Connectors)-FSC 5935

SAE AS 4875

Fittings, Straight Threaded Boss or Flanged, Fluid Connection

SAE AS 3578

Packing, Preformed - O-Ring Seal AMS 7271-FSC 5330

SAE AS 81934/2A

(R) BEARING, SLEEVE, FLANGED, SELF-LUBRICATING, -65 °F TO 325 °F-FSC 3120

SAE AS 81934A

(R) Bearings, Sleeve, Plain and Flanged, Self-Lubricating

SAE AS 21922B

SLEEVE, COUPLING, FLARELESS-FSC 4730

SAE AS 7928/1B

(R) TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE

SAE ARP 4761

Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment

SAE AS 1035E

FITTING, TEE, STANDARD AND REDUCER, FLARED

SAE AS 5179A

NUT, FITTING, PORT

SAE AS 1040E

FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARED

SAE AS 22759/32

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LIGHTWEIGHT, TIN-COATED COPPER, 150°C, 600 VOLT

SAE AS 3510A

Cable, Safety, Kit - Corrosion and Heat Resistant Steel, UNS S32100-UNS S32100; FSC 5340

SAE AS 21913B

(R) PLUG, FLARELESS TUBE

SAE AS 81714 AMD 2

Terminal Junction System (TJS), Environment Resistant General Specification For

SAE AS 24585B

SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 POUNDS

SAE AS 22759/33

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LIGHTWEIGHT, SILVER-COATED, HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT

SAE AS 5230

Fitting, Union and Reducer, Flareless-FSC 4730

SAE AS 22759/16

Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Medium Weight, Tin-Coated Copper Conductor, 600-Volt, 150 Degrees C-FSC 6145

SAE AS 3581

Packing, Preformed - O-Ring Seal AMS 7259-FSC 5330

SAE AS 7245A

Inserts, Screw Thread, Helical Coil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification For

SAE ARP 1383B

(R) Impulse Testing of Aerospace Hydraulic Actuators, Valves, Pressure Containers, and Similar Fluid System Components

SAE AS 81934/1A

(R) BEARING, SLEEVE, PLAIN, SELF-LUBRICATING, -65 °F TO 325 °F-FSC 3120

SAE AS 90376A

CAP, DUST, PLASTIC, ELECTRIC CONNECTOR

SAE AS 1656C

FITTING END, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, MALE AND FEMALE DESIGN STANDARD

SAE AS 33201

Circuit Breaker-Aircraft, Trip-Free, Push Pull, 1/2 Thru 20 Amps, Type I -55 Thru +121 Degrees C-FSC 5925; Should Be Used Instead of MS3320N, Which Was Cancelled on 31 August 1999; Amendment 1 - November 2004

SAE AS 567J

Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use of

SAE AS 14238B

Bushing, Sleeve Flanged, Press Fit, Ream Type-FSC 3120

SAE AS 9489A

(R) BOLT, MACHINE - HEXAGON HEAD, FULL, SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A-FSC 5306

SAE AS 25281A

Clamp, Loop, Plastic, Wire Support-FSC 5340; Should Be Used Instead of MS25281, Which Was Cancelled on 29 October 1999

SAE AS 7431

Bracket, Support Clamp

SAE AS 85049/32A-A1

Connector Accessories, Electrical, Backshell, Nonenvironmental, 90°, Shielded Termination, Category 7 (For MIL-DTL-38999 Series I and II Connectors)

SAE AS 5173B

FITTING, BUSHING, PORT, REDUCER-FSC 4730

SAE AS 85049/18A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAIGHT, RFI/EMI, CATEGORY 2B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)

SAE AS 7351

Clamp, Loop Type Bonding

SAE AS 1895/4D

COUPLING, V-RETAINER, SINGLE LATCH, TYPE II LOW PROFILE

SAE AS 27641B

(R) Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty

SAE AS 81935B

(R) Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For

SAE AS 7477D

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification-FSC 5306

SAE AS 81820B

Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation

SAE AS 9321

Washer, Flat - AMS 5510

SAE ARP 4754

Certification Considerations for Highly-Integrated or Complex Aircraft Systems

SAE AS 1033E

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED

SAE AS 39029/57

Contacts, Electrical Connectors, Socket, Crimp Removable (for MIL-C-24308, MIL-C-38999 Series II, MIL-C-55302/68, /71, /72, /75 and MIL-C-83733 Connectors)-FSC 5935

SAE AS 8660

Silicone Compound NATO Code Number S-736-FSC 6850; Should Be Used Instead of MIL-S-8660C, Which Was Cancelled on 30 September 1999

SAE AS 22759/43

Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Normal Weight, Silver-Coated Copper, 200 Degrees Celsius, 600 Volt

SAE AS 3217A

Ring, Retaining-Spiral, Internal, Light Duty, CRES-FSC 5365

SAE AS 3486C

NUT, SELF-LOCKING, EXTENDED DOUBLE HEXAGON, REDUCED FLANGE, DRY FILM LUBE, UNS S66286, CLASS: 160 KSI/800 DEGREES F-FSC 5310

SAE AS 1339F

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees Lightweight, Hydraulic and Pneumatic

SAE AS 25226

Link, Terminal, Connecting-FSC 5940; Should Be Used Instead of MS25226, which Was Cancelled on 31 August, 1998

SAE AS 9549

Washer, Flat - AMS 5510-FSC 5310

SAE MA 1567B

Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For

SAE AS 5620A

Titanium Hydraulic Tubing, Ti-3Al-2.5V Cold Worked and Stress Relieved, Up to 35,000 kPa (5080 psi), Requirements for Qualification Testing and Control

SAE AS 620F

Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft

SAE AS 7928/4

Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1 (for 150 Degrees C Total Conductor Temperature)-FSC 5940; Should Be Used Instead of MIL-T-7928/4A, Which Was Cancelled on 31 August 1999; Amendment 1 - September 2004

SAE AS 39029/4A

(R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES I AND III, AND MIL-DTL-83733 CONNECTORS)

SAE AS 85049/17A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGRY 2B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)

SAE AS 85049/51A

Connector Accessories, Electrical, Strain Relief, Nonenvironmental, 90 degree, Self-Locking and Non Self-Locking Category 4B (for MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series III Connectors)-FSC 5935; Amendment 2 - 11/2006

SAE AS 1301E

Adapters - Port Connection, Ring Locked Design, Installation and Removal of

SAE AS 123301 THRU AS 123450A

(R) RIVET, SOLID, UNIVERSAL HEAD, NICKEL ALLOY UNS N06600-FSC 5320

SAE AS 39029/5A

CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-26482 SERIES 2, AS81703 SERIES 3, MIL-C-83723 SERIES I AND III, AND MIL-C-83733 CONNECTORS AND MIL-S-12883/40 AND /41 RELAY SOCKETS)-FSC 5999

SAE AS 9110

Quality Maintenance Systems - Aerospace - Requirements for Maintenance Organizations

SAE AS 21908C

ELBOW, BULKHEAD UNIVERSAL 90°, FLARELESS TUBE

SAE AS 14104B

BEARING, PLAIN, SELF-LUBRICATING,SELF-ALIGNING, LOW SPEED, NARROW, CHAMFERED RACE, -65 TO 325 °F-FSC 3120

SAE AS 9003

Inspection and Test Quality System

SAE AS 4536A

Safety Cable Kit Procurement Specification and Requirements for Use

SAE AS 9902A

Plug, Machine Thread Drilled, Preformed Packing MIL-S-8879 Thread-FSC 5365

SAE AS 1034E

FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARED

SAE AS 4370B

Nut, Fitting, Retained

SAE AS 9320

Washer, Flat - AMS 6350

SAE ARP 994

Recommended Practice for the Design of Tubing Installations for Aerospace Fluid Power Systems

SAE AS 1007F

Fitting, Union, Standard and Reducer, Bulkhead, Flareless-FSC 4730

SAE AS 9592B

BRACKET, ANGLE, 90°, CRES UNS S32100, .190 BOLT

SAE AS 29512

Packing, Preformed, Hydocarbon Fuel Resistant, Tube Fittings,

SAE AS 33611

Tube Bend Radii

SAE AS 5827A

FITTING END, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD

SAE AS 8775

Hydraulic System Components, Aircraft and Missiles, General Specification for-Should Be Used Instead of MIL-H-8775D, which Was Cancelled on 28 September, 1998

SAE AS 14237A

Bushing, Sleeve Plain, Press Fit, Ream Type

SAE AS 1990C

Aluminum Alloy Tempers

SAE AS 5127/1A

Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds

SAE AS 1055D

Fire Testing of Flexible Hose, Tube Assemblies, Coils, Fittings, and Similar System Components

SAE ARP 1870

Aerospace Systems Electrical Bonding and Grounding for Electromagnetic Compatibility and Safety

SAE AS 35411B

Fittings, Lubrication

SAE AS 1933A

(R) Age Controls for Hose Containing Age-Sensitive Elastomeric Material

SAE AS 9490A

(R) BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A-FSC 5306

SAE AS 9565C

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .1900-32 UNJF-3A

SAE AS 1946B

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 Degrees F, Hydraulic and Pneumatic

SAE AS 1701C

Lubricant, Solid Film

SAE AS 1895/7C

Seal, Type I & II Standard and Low Profile

SAE AS 33681A

Strap, Tiedown, Electrical Components, Identification, Adjustable, Self-Clinching, Plastic, Type II, Class 1

SAE AS 71051A

(R) Pipe Threads, Taper, Aeronautical National Form, Symbol ANPT - Design and Inspection Standard

SAE AS 24563B

FLANGE PROFILES, V-COUPLING, DESIGN STANDARD-FSC 5342

SAE AS 85049/19A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, RFI/EMI, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)

SAE AS 22759/44

Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Lightweight, Silver-Coated Copper, 200 Degrees Celsius, 600 Volt

SAE AS 4444

Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi

SAE AS 85049/39A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-Amendment 1:11/2006; FSC 5935

SAE AS 115F

(R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, STRAIGHT TO STRAIGHT, FLARELESS, LIGHTWEIGHT

SAE AS 9120

Quality Management Systems - Aerospace Requirements for Stockist Distributors

SAE AS 22759/1

Wire, Electrical, Fluoropolymer-Insulated, PTFE and PTFE-Coated Glass, Silver-Coated Copper Conductor, 600-Volt

SAE AS 9132A

(R) Data Matrix Quality Requirements for Parts Marking

SAE AS 123451 THRU AS 123600B

(R) RIVET, SOLID, 100 DEGREES FLUSH HEAD, HIGH TEMPERATURE, 347 CRES, UNS S34700-FSC 5320

SAE AS 4842

Fittings and Bosses, Pipe Threaded, Fluid Connection

SAE AS 9245A

(R) Pin, Cotter - CRES, AMS 7211-FSC 2615

SAE AS 85049/31A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-C-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935

SAE AS 85049/47A

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)-Amendment 2: 02/2005; Amendment 3: 11/2006

SAE AS 18012

Markings for Aircrew Station Displays Design and Configuration of-FSC 1500; Should Be Used Instead of MIL-M-18012B(3), Which Was Cancelled on 02 September 1998

SAE AS 18280/1

Sleeve, Bite Type, 24 Degrees Cone Flareless Fitting, 3000 psi

SAE AS 1895/15D

Flange End, Female, Type II Low Profile Design Standard

SAE AS 21907B

(R) ELBOW, BULKHEAD UNIVERSAL, 45 DEGREE, FLARELESS TUBE

SAE AS 1975C

(R) Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 Degrees F, Standard Duty, Hydraulic, Aircraft Systems

SAE AS 9696B

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .1900-32 UNJF-3A-FSC 5306

SAE AS 1039E

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED

SAE AS 1241C

(R) Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft

SAE AS 21151C

Bearing, Ball, Rod End, Double Row, Precision, External Thread, Self-Aligning, Airframe, Type II, -65 Degrees to 300 Degrees F-FSC 3110

SAE AS 39029/22

Contacts, Electrical, Connector, Socket, Crimp Removable, (for Mil-C-81714 Terminal Junction System Series II and Mil-C-81511 Series 3 and 4 Class L Connectors)-FSC 5935; Amendment 1: 12/2005

SAE AS 1895/14C

Flange End, Male, Type II Low Profile Design Standard

SAE AS 1653C

MALE FERRULE, THREADLESS FLEXIBLE, FIXED CAVITY, SELF-BONDING, SWAGED

SAE AS 1037F

FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARED

SAE AS 39029/63

Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-C-24308 Connectors)-FSC 5935

SAE AS 5550A

FITTING ASSEMBLY, RING LOCKED, ADAPTER, FLARELESS TO PORT, EXTRA FINE THREADS, 5080 PSI-FSC 4730

SAE AS 3215A

RING, RETAINING-SPIRAL, INTERNAL, HEAVY DUTY, CRES-FSC 5365

SAE AS 7471D

Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant Procurement Specification

SAE ARP 908C

Torque Requirements, Installation and Qualification Test, Hose and Tube Fitting

SAE AS 13572

Springs, Helical, Compression and Extension

SAE AS 21905B

(R) TEE, FLARELESS TUBE

SAE AS 1895C

(R) Coupling Assembly, V-Retainer, High Pressure High Temperature, Pneumatic Tube

SAE AS 4875/1

Fittings, Straight Thread Boss or Flanged to 37 Degree Flared, Fluid Connection

SAE AS 930E

FITTING END, STRAIGHT THREAD, PORT CONNECTION, DESIGN STANDARD

SAE AS 81935/2A

(R) BEARING, PLAIN ROD END, SELF-ALIGNING, SELF-LUBRICATING, WIDE, INTERNALLY THREADED, -65 TO +325 °F-FSC 3120

SAE ARP 5412A

Aircraft Lightning Environment and Related Test Waveforms

SAE AS 9558B

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A-FSC 5306

SAE AS 21900B

(R) ADAPTER, FLARELESS TUBE TO A FLARED TUBE

SAE AS 1501C

HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT

SAE AS 9276A

(R) Washer, Key - 180 Deg. Locking, CRES, UNS S32100

SAE AS 972B

Spline Details, Accessory Drives and Flanges

SAE AS 1650A

Coupling Assembly, Threadless, Flexible, Fixed Cavity, Self-Bonding, Procurement Specification

SAE AS 58091

Circuit Breakers, Trip-Free, Aircraft General Specification for-FSC 5925; Amendment 1 - November 2004

SAE AS 9697C

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .2500-28 UNJF-3A-FSC 5306

SAE AS 29561

Packing, Preformed,

SAE AS 81714/60

TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SERIES II-FSC 5940

SAE AS 1290A

Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems

SAE AS 123601 THRU AS 123750B

RIVET, SOLID, 100° FLUSH HEAD, NICKEL ALLOY UNS N06600

SAE AS 14102B

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, CHAMFERED RACE, -65 TO 325 °F-FSC 3120

SAE AS 1544A

Hose, Air Duct, Flexible, Helical, Nonmetallic Wire Supported (Covered), Silicone Rubber, Self Extinguishing

SAE AS 2078A

(R) Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)

SAE AS 17143

Terminal, Lug, Crimp Style, Copper, Insulated, Rectangular Tongue, Type II, Class 1 for 105 Degrees C Total Conductor Temperature-FSC 5940

SAE AS 27645B

(R) Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Light and Heavy Duty-FSC 3110; Should Be Used Instead of MS27645E, Which Was Cancelled on 23 July 1998

SAE AS 25244A

CIRCUIT BREAKER, TRIP-FREE, PUSH-PULL, 5 THRU 50 AMP, TYPE I

SAE AS 85052/2

CLAMP, LOOP, TUBE 17-7 PH CRES, 275 °F, PHOSPHATE ESTER FLUID RESISTANT

SAE AS 933D

FITTING, ADAPTER, UNION, FLARED TO BOSS-FSC 4730

SAE MA 3279B

Insert, Screw Thread, Helical Coil, Metric Series, Free Running, CRES, Uncoated

SAE AS 123151 THRU AS 123300A

(R) RIVET, UNIVERSAL HEAD, HIGH TEMPERATURE, 347 CRES UNS S34700-FSC 5320

SAE AS 5195C

FITTING, ELBOW, 90 DEGREES, FLARED TO PIPE-FSC 4730

SAE AS 1792D

NUT, FITTING, LIGHTWEIGHT, FLARELESS-FSC 4730

SAE AS 22759/9

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED COPPER CONDUCTOR, 1000 VOLT

SAE AS 3066A

Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251-FSC 5310

SAE AS 39029/30A

(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS50151 SERIES, AS34501 AND MIL-DTL-83723 SERIES 2 CONNECTORS)

SAE AS 39029/64

Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-C-24308 Connectors)-FSC 5935

SAE AS 1708D

Fitting End, Internal Flare Design Standard

SAE AS 1716D

(R) FERRULE, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TUBE END-FSC 4730

SAE AS 1790G

Nut, Fitting, Retained, Lightweight

SAE AS 5192B

Fitting, Tee, Internal Straight Thread Port-FSC 4730

SAE AS 1132G

(R) Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch Series - Design Standard

SAE AS 3504A

Insert - Thin Wall, Short Self-Locking, 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread-FSC 5340

SAE AS 7101C

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM

SAE AS 5201

Fitting End, External Taper Pipe Thread, Design Standard-FSC 4730

SAE AS 81820/1B

BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, NARROW, GROOVED RACE, -65 TO +325 °F

SAE ARP9013

Statistical Product Acceptance Requirements

SAE AS 5148

Assembly, Installation and Torque for Flareless and Straight Thread Fluid Fittings and Tube Assemblies

SAE AS 85049/88A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935

SAE AS 9566A

R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .2500-28 UNJF-3A-FSC 5306

SAE AIR 1471A

Torque Tightening Threaded Fasteners

SAE AS 1710C

Coupling, Fuel, Flexible, Variable Cavity, Threaded Type With Ferrules

SAE MA 3329C

Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Uncoated

SAE AS 15002B

FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, STRAIGHT THREADS, STEEL, TYPE II

SAE AS 870D

(R) Wrenching Configuration, Bi-Hexagonal (12 Point) Drive, Design Standard for-FSC 5120

SAE AS 39029/29A

(R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS50151 SERIES, AS34501 AND MIL-DTL-83723 SERIES 2 CONNECTORS)

SAE AS 51990A

Ring, Lock, Serrated-FSC 5365

SAE AS 9105

Pin, Straight, Headless, AMS5688, Lock

SAE AS 81935/4

Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Externally Threaded, -65 Degrees F to +325 Degrees F-FSC 3120

SAE AS 9356B

(R) Nut, Plain, Hexagon, UNS S66286-FSC 5310

SAE AS 3123

Plug, Expansion - Aluminum, 2024-T4, Short; Std and .010 Oversize Diameters-FSC 5315

SAE ARP 1232B

Gland Design, Elastomeric O-Ring Seals, Static Radial

SAE AS 1581B

(R) Fitting, Sleeve, Flareless Acorn to Integral Weld Ring, 3000 psi

SAE AS 27646B

(R) Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty

SAE AS 33566

FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORS-FSC 4730; Should Be Used Instead of MS33566, Which Was Cancelled on 14 September 2000

SAE AS 85049/10A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, SHIELD TERMINATION, CATEGORY 1A (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935

SAE AS 1895/12C

Flange End, Male, Type I Standard Profile Design Standard

SAE AS 5587

Clamp, Loop, Plain, Support, Aircraft-FSC 5340

SAE AS 683C

Installation Procedures and Torques for Fluid Connections

SAE AS 9006

Deliverable Aerospace Software Supplement for AS9100A Quality Management Systems - Aerospace - Requirements for Software (based on AS9100A)

SAE AS 23190/3

Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support Strap, Tie down, Adjustable, Corrosion Resistant Steel Type VI, Class 1-FSC 5975

SAE AS 1031E

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARED

SAE AS 1730A

Coupling, Fuel, Rigid, Threaded Type

SAE AS 5355B

Couplings, Clamp, Grooved, V-Band

SAE ARP 1231A

Gland Design, Elastomeric O-Ring Seals, General Considerations

SAE AS 3418

Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .250- 28UNJF-3A (Stress Rupture Resistant)-FSC 5306

SAE AS 4863

Plug, Pipe, External Thread

SAE AS 7466B

Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi Fatigue Rated, Procurement Specification-FSC 5306; UNS N07718

SAE AS 1424G

(R) Hose Assemblies, Metal, Medium Pressure, High Temperature

SAE AS 1655C

COUPLING BODY, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING

SAE ARP 1917A

(R) Clarification of Terms Used in Aerospace Metals Specifications

SAE AS 122900 THRU AS 122939

CLAMP - LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE-FSC 5340

SAE AS 3477A

Nut, Self Locking - Double Hexagon, Extended Washer, UNS S66286, Silver Plated, UNJ Thread-FSC 5310

SAE ARP 1176

Oxygen System and Component Cleaning and Packaging

SAE AS 122676 THRU AS 122775A

(R) PIN, STRAIGHT, HEADLESS, STEEL, UNS G10950-FSC 5315

SAE AS 1506C

Hose, Air Duct, Semiflexible, Sleeve Section, Unreinforced, Self Extinguishing

SAE AS 51992A

Stud, Locked In-Ring, Serrated, High Strength

SAE AS 4468C

Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification

SAE AS 9386

PACKING, PREFORMED, AMS 7267, O-RING-FSC 5330

SAE ARP 5416

Aircraft Lightning Test Methods

SAE AS 85720

Fittings, Tube, Fluid Systems, Separable, High Pressure, Dynamic Beam Seal, General Specification For-FSC 4730

SAE AS 5857

Gland Design, O-ring and Other Elastomeric Seals, Static Applications

SAE AS 85049/11A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935

SAE AS 3236B

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A

SAE AS 7949B

(R) Bearings, Ball, Airframe, Antifriction, General Standard for

SAE AS 19692A

Pumps, Hydraulic, Variable Flow, General Specification for

SAE AS 871B

Manufacturing and Inspection Standards for Preformed Packings (O-Rings)

SAE AS 3238B

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A

SAE AS 5355/1

Couplings, Clamp, Grooved, V-Band, 1.75 to 14.25 Flange OD (-65 to 800 Degrees F)-FSC 5340

SAE AS 9208B

BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A

SAE AS 3124

Pin, Expansion - Aluminum, 2024-T4, Short

SAE ARP 598C

(R) Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems

SAE AS 3507B

(R) Insert -Thin Wall , Self-Locking Short and Long Length Installation and Removal of

SAE AS 604D

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic

SAE AS 9104A

Requirements for Aerospace Quality Management System Certification/Registrations Programs