|
SAE J514 |
Hydraulic Tube Fittings |
|
SAE J429 |
Mechanical and Material Requirements for Externally Threaded Fasteners |
|
SAE J1926-1 |
Connections for General Use and Fluid PowerPorts and Stud Ends with ASME B1.1 Threads and O-Ring SealingPart 1: Threaded Port with O-Ring Seal in Truncated Housing |
|
SAE J2295 |
Fastener Part Standard - Caps Screws, Hex Bolts, and Hex Nuts (inch Dimensioned) |
|
SAE J403 |
Chemical Compositions of SAE Carbon Steels-Supersedes Ford ESN-M1A46-A |
|
SAE J1453 |
Fitting - O-Ring Face Seal |
|
SAE J200 |
Classification System for Rubber Materials |
|
SAE J517 |
Hydraulic Hose |
|
SAE J516 |
(R) Hydraulic Hose Fittings |
|
SAE J20 |
Coolant System Hoses |
|
SAE J512 |
Automotive Tube Fittings |
|
SAE J1508 |
Hose Clamp Specifications |
|
SAE J995 |
(R) Mechanical and Material Requirements for Steel Nuts |
|
SAE J30 |
Fuel and Oil Hoses-FSC 4720 |
|
SAE J442 |
Test Strip, Holder, and Gage for Shot Peening |
|
SAE J846 |
Coding Systems for Identification of Fluid Conductors and Connectors |
|
SAE J1199 |
Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners |
|
SAE J1926-2 |
Connections for General Use and Fluid PowerPorts and Stud Ends with ASME B1.1 Threads and O-Ring SealingPart 2: Heavy-Duty (S Series) Stud Ends |
|
SAE J404 |
Chemical Compositions of SAE Alloy Steels |
|
SAE J1231 |
Formed Tube Ends for Hose Connections and Hose Fittings |
|
SAE J1939 |
(R) Recommended Practice for a Serial Control and Communications Vehicle Network |
|
SAE J1926-3 |
Connections for General Use and Fluid PowerPorts and Stud Ends with ASME B1.1 Threads and O-Ring SealingPart 3: Light-Duty (L-Series) Stud Ends |
|
SAE J123 |
(R) Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications |
|
SAE J2270 |
Ship Systems and EquipmentThreaded FastenersInspection, Test, and Installation Requirements |
|
SAE J2655 |
Fastener Part StandardWashers and Lockwashers (Inch Dimensioned) |
|
SAE J518 |
Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type-June 1993 |
|
SAE J515 |
Specification for Hydraulic O-Ring Materials, Properties, and Sizes for Metric and Inch Stud Ends, Face Seal Fitting and Four-Screw Flange Tube Connections |
|
SAE J2244/1 |
Connections for Fluid Power and General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 1: Port with O-Ring Seal in Truncated Housing |
|
SAE J443 |
(R) Procedures for Using Standard Shot Peening Test Strip |
|
SAE J1128 |
Low Voltage Primary Cable |
|
SAE J1939-71 |
Vehicle Application Layer (Through February 2007) |
|
SAE J2360 |
Lubricating Oil, Gear Multipurpose (Metric) Military Use |
|
SAE J533 |
(R) Flares for Tubing |
|
SAE J513 |
Refrigeration Tube Fittings - General Specifications |
|
SAE J1392 |
(R) Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and Coated Sheet |
|
SAE J444 |
Cast Shot and Grit Size Specifications for Peening and Cleaning |
|
SAE J1237 |
Metric Thread Rolling Screws |
|
SAE J2340 |
Categorization and Properties of Dent Resistant, High Strength, and Ultra High Strength Automotive Sheet Steel |
|
SAE J1739 |
(R) Potential Failure Mode and Effects Analysis in Design (Design FMEA), Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA), and Potential Failure Mode and Effects Analysis for Machinery (Machinery FMEA) |
|
SAE J1086 |
Numbering Metals and Alloys, Recommended Practice-July 1995 (ASTM E 527) |
|
SAE J1453-1 |
Specification for O-Ring Face Seal Connectors: Part 1 Tube Connection Details and Common Requirements for Performance and Tests |
|
SAE J1939-73 |
Application Layer - Diagnostics |
|
SAE J405 |
(R) Chemical Compositions of SAE Wrought Stainless Steels |
|
SAE J2295M |
FastenersPart StandardCap Screws, Hex Bolts, and Hex Nuts (Metric) |
|
SAE J411 |
(R) Carbon and Alloy Steels |
|
SAE J2277 |
Shot Peening Coverage |
|
SAE J423 |
Methods of Measuring Case Depth |
|
SAE J2484 |
Fastener Part StandardMachine Screws |
|
SAE J246 |
Spherical and Flanged Sleeve (Compression) Tube Fittings |
|
SAE J1939-21 |
Data Link Layer |
|
SAE J530 |
Automotive Pipe Fittings |
|
SAE J1455 |
(R) Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Applications |
|
SAE J537 |
(R) Storage Batteries |
|
SAE J417 |
Hardness Tests and Hardness Number Conversions-December 1983 |
|
SAE J441 |
(R) Cut Wire Shot-June 1993 |
|
SAE J1268 |
Hardenability Bands for Carbon and Alloy H Steels, Standard-May 1995 |
|
SAE J343 |
Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies |
|
SAE J827 |
High-Carbon Cast-Steel Shot |
|
SAE J2271 |
Ship Systems and Equiment Part Standard for Studs Continous and Double End (Inch Series) |
|
SAE J744 |
Hydraulic Pump and Motor Mounting and Drive Dimensions, Standard-June 1996 |
|
SAE J476A |
Dryseal Pipe Threads-June 1961 |
|
SAE J531 |
Automotive Pipe, Filler, and Drain Plugs-May 1995 |
|
SAE J561 |
Electrical Terminals - Eyelet and Spade Type |
|
SAE J1939-11 |
Physical Layer, 250K bits/s, Twisted Shielded Pair |
|
SAE J434 |
(R) Automotive Ductile (Nodular) Iron Castings |
|
SAE J412 |
General Characteristics and Heat Treatments of Steels-October 1995 |
|
SAE J452 |
General Information - Chemical Compositions, Mechanical and Physical Properties of SAE Aluminum Casting Alloys |
|
SAE J163 |
Low Tension Wiring and Cable Terminals and Splice Clips |
|
SAE J20-1 |
Coolant Hose-Supplement to SAE J20 for Goverment Use Replacing Part of MS521130 |
|
SAE J1960 |
Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-cooled Xenon Arc Apparatus |
|
SAE J1127 |
Low Voltage Battery Cable |
|
SAE J1349 |
Engine Power Test CodeSpark Ignition and Compression IgnitionNet Power Rating |
|
SAE J1453-2 |
Specification for O-Ring Face Seal Connectors: Part 2 Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with ISO 6149-2 Metric Stud Ends |
|
SAE J409 |
Product Analysis - Permissible Variations from Specified Chemical Analysis of a Heat or Cast of Steel |
|
SAE J300 |
Engine Oil Viscosity Classification |
|
SAE J1344 |
Marking of Plastic Parts |
|
SAE J1453-3 |
Specification for O-Ring Face Seal Connectors: Part 3 Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Connectors, Caps, and Connectors with SAE J1926-2 Inch Stud Ends |
|
SAE J1885 |
Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus |
|
SAE J1100 |
(R) Motor Vehicle Dimensions |
|
SAE J2280 |
Ship Systems and Equipment - Fasteners - Selection and Identification Requirements, Standard-April 1996 |
|
SAE J2334 |
Laboratory Cyclic Corrosion Test |
|
SAE J402 |
(R) New Steel Designation System for Wrought or Rolled Steel |
|
SAE J2656 |
Fastener Part Standard Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned |
|
SAE J431 |
(R) Automotive Gray Iron Castings |
|
SAE J1402 |
Automotive Air Brake Hose and Hose Assemblies |
|
SAE J534 |
Lubrication Fittings |
|
SAE J122 |
Surface Discontinuities on Nuts |
|
SAE J2044 |
Quick Connect Coupling Specification for Liquid Fuel and Vapor/Emissions Systems |
|
SAE J1065 |
(R) Nominal Reference Working Pressures for Steel Hydraulic Tubing |
|
SAE J1587 |
Electronic Data Interchange Between Microcomputer Systems in Heavy-Duty Vehicle Applications |
|
SAE J826 |
(R) Devices for Use in Defining and Measuring Vehicle Seating Accommodation, Standard |
|
SAE J792A |
SAE Manual on Blast Cleaning, Information Report-June 1968 |
|
SAE J1979 |
(R) E/E Diagnostic Test Modes |
|
SAE J1397 |
Estimated Mechanical Properties and Machinability of Steel Bars, Information Report-May 1992 |
|
SAE JA1003 |
Software Reliability Program Implementation Guide |
|
SAE J1273 |
Recommended Practices for Hydraulic Hose Assemblies |
|
SAE J1701 |
Torque-Tension Tightening for Inch Series Fasteners |
|
SAE J617 |
(R) Engine Flywheel Housing and Mating Transmission Housing Flanges |
|
SAE J78 |
Steel Self-Drilling Tapping Screws |
|
SAE J1939-74 |
ApplicationConfigurable Messaging |
|
SAE J844 |
(R) Nonmetallic Air Brake System Tubing |
|
SAE J2244/2 |
Connections for FLuid Power and General Use Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends Dimensions, Design, Test Methods, and Requirements |
|
SAE J24714 |
Fluid Systems - Connector Tubes - General Specification and Part Standard |
|
SAE J1703 |
Motor Vehicle Brake Fluid |
|
SAE J1939-13 |
Off-Board Diagnostic Connector |
|
SAE J81 |
Thread Rolling Screws |
|
SAE J1527 |
Marine Fuel Hoses |
|
SAE J2370 |
Geometric Dimensions and Tolerancing for Curved Hose |
|
SAE J2593 |
Information Report for the Installation of Fluid Conductors and Connectors |
|
SAE J1939-31 |
Network Layer |
|
SAE J400 |
Test for Chip Resistance of Surface Coatings |
|
SAE J1939-81 |
NETWORK MANAGEMENT |
|
SAE J2064 |
R134a Refrigerant Automotive Air-Conditioned Hose |
|
SAE J467B |
Special Purpose Alloys ( |
|
SAE J1292 |
(R) Automobile and Motor Coach Wiring |
|
SAE J2258 |
(R) Light Utility Vehicles |
|
SAE J1249 |
Former SAE Standard and Former SAE Ex-Steels |
|
SAE J174 |
Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series |
|
SAE J1942 |
Hose and Hose Assemblies for Marine Applications |
|
SAE J525 |
Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring |
|
SAE J1995 |
Engine Power Test Code - Spark Ignition and Compression Ignition - Gross Power Rating, Standard; |
|
SAE J483 |
High and Low Crown (Blind, Acorn) Hex Nuts |
|
SAE J356 |
Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading |
|
SAE J58 |
Flanged 12-Point Screws |
|
SAE JA1012 |
A Guide to the Reliability-Centered Maintenance (RCM) Standard |
|
SAE J1966 |
Lubricating Oils, Aircraft Piston Engine (Non-Dispersant Mineral Oil) |
|
SAE J560 |
(R) Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable |
|
SAE J1673 |
High Voltage Automotive Wiring Assembly Design, Recommended Practice-July 1996 |
|
SAE J1899 |
Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant) |
|
SAE J1939-15 |
Reduced Physical Layer, 250K bits/sec, Un-Shielded Twisted Pair (UTP) |
|
SAE JA1000-1 |
Reliability Program Standard Implementation Guide |
|
SAE J1708 |
Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications |
|
SAE J575 |
Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 mm in Overall Width |
|
SAE J1701M |
Torque-Tension Tightening for Metric Series Fasteners, Information Report-July 1996 |
|
SAE J1939-01 |
Recommended Practice for Control and Communication Newtwork for On-Highway Equipment |
|
SAE J2244-4 |
Connections for Fluid Power and General Use Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 4: Heavy-Duty (S Series) External Hex Port Plugs Dimensions, Design, Test Methods, and Requirements |
|
SAE J524 |
Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring |
|
SAE J386 |
(R) Operator Restraint System for Off-Road Work Machines |
|
SAE J2362 |
Lubricating Oil, Automotive Engine, API Service SM for Military Administrative Service |
|
SAE J454 |
General Data on Wrought Aluminum Alloys-February 1991 |
|
SAE J461 |
Wrought and Cast Copper Alloys |
|
SAE J115 |
Safety Signs |
|
SAE JA1011 |
Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes referencing Meassage Specification |
|
SAE J1120 |
Spherical Rod Ends, Standard-June 1989 |
|
SAE J2244-3 |
Connections for Fluid Power and General Use Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing, Part 3: Light-Duty (L Series) Stud Ends Dimensions, Design, Test Methods, and Requirements |
|
SAE J1939-75 |
Application Layer - Generator Sets and Industrial |
|
SAE J2014 |
(R) Pneumatic Tires for Military Tactical Wheeled Vehicles-FSC 2610 |
|
SAE J1061 |
Surface Discontinuities on General Application Bolts, Screws, and Studs |
|
SAE J684 |
Trailer Couplings, Hitches, and Safety ChainsAutomotive Type |
|
SAE JA1002 |
Software Reliability Program Standard |
|
SAE J1211 |
Recommended Environmental Practices for Electronic Equipment Design, Recommended Practice-November 1978 |
|
SAE J1362 |
Graphical Symbols for Operator Controls and Displays on Off-Road Self-Propelled Work Machines |
|
SAE J2344 |
Guidelines for Electric Vehicle Safety |
|
SAE J1351 |
Hot Odor Test for Insulation Materials, Recommended Practice |
|
SAE J864 |
Surface Hardness Testing with Files, Recommended Practice |
|
SAE J526 |
Welded Low-Carbon Steel Tubing-FSC 4710 |
|
SAE J1503 |
Performance Test for Air-Conditioned, Heated, and Ventilated Off-Road, Self-Propelled Work Machines |
|
SAE J773 |
Conical Spring Washers |
|
SAE J121M |
Decarburization in Hardened and Tempered Metric Threaded Fasteners |
|
SAE J1113-1 |
Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) |
|
SAE J1401 |
Road VehicleHydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids |
|
SAE J1147 |
Welding, Brazing, and Soldering - Materials and Practices, Information Report-June 1983 |
|
SAE J164 |
Radiator Caps and Filler Necks |
|
SAE J2363 |
Lubricating Oil for Wheeled Military Vehicles with Heavy-Duty Diesel Engines |
|
SAE J706 |
Rating of Winches |
|
SAE J1850 |
Class B Data Communications Network Interface |
|
SAE J2485 |
Fastener Part Standard - Machine Screw Nuts (Metric and Inch) |
|
SAE J2596 |
Fastener Part StandardTapping Screws and Metallic Drive Screws (Inch Dimensioned) |
|
SAE J1058 |
(R) Standard Sheet Steel Thickness and Tolerances |
|
SAE J1654 |
High Voltage Primary Cable |
|
SAE J463 |
Wrought Copper and Copper Alloys |
|
SAE J358 |
Nondestructive Tests-February 1991 |
|
SAE J369 |
Flammability of Polymeric Interior Materials Horizontal Test Method |
|
SAE J636 |
V-Belts and Pulleys |
|
SAE J1962 |
(R) Diagnostic Connector Equivalent to ISO/DIS 15031-3:December 14, 2001 |
|
SAE J2012 |
(R) Diagnostic Trouble Code Definitions |
|
SAE J1116 |
Categories of Off-Road Self-Propelled Work Machines |
|
SAE J1942-1 |
Qualified Hoses for Marine Applications |
|
SAE J217 |
(R) Stainless Steel 17-7 PH Spring Wire and Springs-July 1994 |
|
SAE J1459 |
(R) V-Ribbed Belts and Pulleys |
|
SAE J492 |
(R) Guide for Rivet Selection and Design Consideration |
|
SAE JA1000 |
Reliability Program Standard |
|
SAE J1081 |
Potential Standard Steels |
|
SAE J185 |
Access Systems for Off-Road Machines |
|
SAE J2534-1 |
(R) Recommended Practice for Pass-Thru Vehicle Programming |
|
SAE J438B |
Tool and Die Steels-May 1970 |
|
SAE J1099 |
Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous of Materials |
|
SAE J159 |
(R) Rated Capacity System-FSC 3810 |
|
SAE J1939-02 |
Agricultural and Forestry Off-Road Machinery Control and Communication Network |
|
SAE J211-1 |
(R) Instrumentation for Impact Test Part 1 Electronic Instrumentation |
|
SAE J2515 |
High Temperature Materials for Exhaust Manifolds |
|
SAE J1756 |
(R) Determination of the Fogging Characteristics of Interior Automotive Materials |
|
SAE J460 |
Bearing Bushing Alloys Chemical Composition of SAE Bearing and Bushing Alloys |
|
SAE J1517 |
Driver Selected Seat Position |
|
SAE J1978 |
OBD II Scan Tool Equivalent to ISO/DIS 15031-4:December 14, 2001 |
|
SAE J51 |
Refrigerant 12 Automotive Air-Conditioning Hose |
|
SAE J482 |
Hexagon High Nuts |
|
SAE J578 |
Color Specification |
|
SAE J694 |
Disc Wheel/Hub or Drum Interface Dimensions Truck and Bus |
|
SAE J905 |
(R) Fuel Filter Test Methods |
|
SAE J493 |
Rod Ends and Clevis Pins-June 1961 |
|
SAE J2441 |
Shot Peening |
|
SAE J141 |
(R) Seat Belt Hardware Performance Requirements-June 1995 |
|
SAE J1639 |
(R) Classification System for Automotive Polyamide (PA) Plastics, Recommended Practice-May 1995; Replaces ESB-M4D574-A, 178-A2, 264-A, 304-A, 314-B, 353-A7, 423-A2; ESA-M4D574-A2, 349-A; ESH-M4D287-C; ESP-M4D344-A; ESF-M4D78-A, 314-A, 426-A, 429-A7, 353-A10 |
|
SAE J1993 |
High-Carbon Cast-Steel Grit |
|
SAE J238 |
Nut and Conical Spring Washer Assemblies |
|
SAE J100 |
Class |
|
SAE J1908 |
(R) Electrical Grounding Practice |
|
SAE J425 |
Electromagnetic Testing by Eddy Current Methods-March 1991 |
|
SAE J1645 |
(R) Fuel Systems and ComponentsElectrostatic Charge Mitigation |
|
SAE J437A |
Selection and Heat Treatment of Tool and Die Steels |
|
SAE J1113-11 |
Immunity to Conducted Transients on Power Leads |
|
SAE J381 |
(R) Windshield Defrosting Systems Test Procedure and Performance Requirements - Trucks, Buses, and Multipurpose Vehicles |
|
SAE J1074 |
Engine Sound Level Measurement Procedure |
|
SAE J903 |
(R) Passenger Car Windshield Wiper Systems |
|
SAE J527 |
(R) Brazed Double Wall Low-Carbon Steel Tubing |
|
SAE J1113-13 |
Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsPart 13: Immunity to Electrostatic Discharge |
|
SAE J1121 |
Helical Compression and Extension Spring Terminology |
|
SAE J1626 |
(R) Braking, Stability, and Control Performance Test Procedures for Air-Brake-Equipped Trucks, Truck-Tractors and Buses |
|
SAE J198 |
Windshield Wiper SystemsTrucks, Buses, and Multipurpose Vehicles |
|
SAE J318 |
Automotive Air Brake Line Couplers (Gladhands) |
|
SAE J366 |
Exterior Sound Level for Heavy Trucks and Buses |
|
SAE J1290 |
(R) Automotive Hydraulic Brake System - Metric Tube Connections |
|
SAE J1644 |
Metallic Tube Connections for Fluid Power and General Use Test Methods for Threaded Hydraulic Fluid Power Connectors |
|
SAE J336 |
Sound Level for Truck Cab Interior |
|
SAE J465 |
Magnesium Casting Alloys-June 1983 |
|
SAE J82 |
Mechanical and Quality Requirements for Machine Screws |
|
SAE J1670 |
Type |
|
SAE J683 |
Tire Chain Clearance- Trucks, Buses (Except Suburban, Intercity, and Transit Buses), and Combinations of Vehicles, Information Report-August 1985 |
|
SAE J401 |
Selection and Use of Steels |
|
SAE J542 |
Starting Motor Mountings-June 1991 |
|
SAE J1436 |
(R) Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests |
|
SAE J1456 |
Maximum Allowable Rotational Speed for Internal Combustion Engine Flywheels, Recommended Practice |
|
SAE J1545 |
(R) Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim |
|
SAE J2387 |
Dimensions and Tolerances for Coolant System Hoses |
|
SAE J620 |
Flywheels for Industrial Engines Used with Industrial Power Take-Offs Equipped with Driving-Ring Type Overcenter Clutches and Engine-Mounted Marine Gears and Single Bearing Engine-Mounted Power Generators |
|
SAE J430 |
Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets Inch Series |
|
SAE J639 |
(R) Safety Standards for Motor Vehicle Refrigerant Vapor Compresssions Systems |
|
SAE JA1010 |
Maintainability Program Standard |
|
SAE J140 |
(R) Seat Belt Hardware Test Procedures-June 1995 |
|
SAE J174M |
(R) Torque-Tension Test Procedure for Steel Threaded Fasteners - Metric Series |
|
SAE J2554 |
Engine Intake Air Water Separation Test Procedure |
|
SAE J2337-1 |
Connections for Fluid Power and High Pressure UsePorts, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 1: Ports With Recessed Conical Seat Requirements, Dimensions, Design, and Test Methods |
|
SAE J1383 |
Performance Requirements for Replaceable Bulb Motor Vehicle Headlamps |
|
SAE J1614 |
Wiring Distribution Systems for Construction, Agricultural, and Off-Road Work Machines |
|
SAE J2284-3 |
High-Speed CAN (HSC) for Vehicle Applications at 500 KBPS |
|
SAE J2115 |
(R) Air Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer |
|
SAE J2260 |
Nonmetallic Fuel System Tubing with One or More Layers |
|
SAE J577 |
Vibration Test Machine and Operation Procedure |
|
SAE J836 |
Automotive Metallurgical Joining, Information Report |
|
SAE J1113-2 |
(R) Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Except Aircraft)Conducted Immunity, 15 Hz to 250 kHzAll Leads |
|
SAE J1992 |
(R) Wheels/Rims - Military Vehicles - Test Procedures and Performance Requirements |
|
SAE J314 |
Felts - Wool and Part Wool |
|
SAE J502 |
Woodruff Keys-September 1972 |
|
SAE J901 |
Universal Joints and Driveshafts - Nomenclature - Terminology - Application |
|
SAE J10 |
(R) Automotive and Off-Highway Air Brake Reservoir Performance and Identification Requirements Truck and Bus |
|
SAE J1742 |
(R) Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses Test Methods and General Performance Requirements |
|
SAE J1930 |
Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and AcronymsEquivalent to ISO/TR 15031-2:April 30, 2002 |
|
SAE J1985 |
(R) Fuel FilterInitial Single-Pass Efficiency Test Method |
|
SAE J933 |
Mechanical and Quality Requirements for Tapping Screws |
|
SAE J941 |
Motor Vehicle Drivers’ Eye Locations |
|
SAE J551-1 |
Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles, Boats (up to 15 m), and Machines (16.6 Hz to 18 GHz) |
|
SAE J1927 |
Cumulative Damage Analysis for Hydraulic Hose Assemblies |
|
SAE JA1010-1 |
Maintainability Program Standard Implementation Guide |
|
SAE J306 |
Automotive Gear Lubricant Viscosity Classification |
|
SAE J588 |
Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width |
|
SAE J814 |
Engine Coolants |
|
SAE J2582 |
Automotive Ductile Iron Castings for High Temperature Applications |
|
SAE J183 |
(R) Engine Oil Performance and Engine Service Classification (Other than “Energy Conservingâ€Â) |
|
SAE J1976 |
(R) Outdoor Weathering of Exterior Materials |
|
SAE J2197 |
HFC-134a (R-134a) Service Hose Fittings for Automotive Air-Conditioning Service Equipment |
|
SAE J775 |
(R) Engine Poppet Valve Information Report |
|
SAE J1033 |
Procedure for Measuring Bore and Face Runout of Flywheels, Flywheel Housings, and Flywheel Housing Adapters, Recommended Practice |
|
SAE J1766 |
(R) Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing |
|
SAE J2261 |
Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width |
|
SAE J230 |
(R) Stainless Steel, SAE 30302, Spring Wire and Springs-June 1994 |
|
SAE J435 |
(R) Automotive Steel Castings |
|
SAE J543 |
(R) Starting Motor Pinions and Ring Gears-November 1995 |
|
SAE J553 |
Circuit Breakers |
|
SAE J573 |
(R) Miniature Lamp Bulbs |
|
SAE J637 |
Automotive V-Belt Drives |
|
SAE J993 |
Alloy and Temper Designation Systems for Aluminum, Standard;-September 1973 |
|
SAE J459 |
Bearing and Bushing Alloys-October 1991 |
|
SAE J419 |
Methods of Measuring Decarburization-December 1983 |
|
SAE J615 |
Engine Mountings |
|
SAE J661 |
(R) Brake Lining Quality Test Procedure |
|
SAE J818 |
Rated Operating Load for Loaders, Standard |
|
SAE J902 |
Passenger Car Windshield Defrosting Systems |
|
SAE J1113-42 |
Electromagnetic CompatibilityComponent Test Procedure Part 42Conducted Transient Emissions |
|
SAE J1253 |
Low-Temperature Cranking Load Requirements of an Engine, Recommended Practice-June 1993 |
|
SAE J126 |
Selecting and Specifying Hot and Cold Rolled Steel Sheet and Strip |
|
SAE J2040 |
Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width |
|
SAE J399 |
Anodized Aluminum Automotive Parts |
|
SAE J499A |
Parallel Side Splines for Soft Broached Holes in Fittings-October 1975 |
|
SAE J695 |
Turning Ability and Off Tracking - Motor Vehicles |
|
SAE J1113-22 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Part 22Immunity to Radiated Magnetic Fields |
|
SAE J2178-2 |
Class B Data Communication Network Messages Part 2: Data Parameter Definitions |
|
SAE J413 |
Mechanical Properties of Heat Treated Wrought Steels |
|
SAE J861 |
(R) Method of Testing Resistance to Crocking of Organic Trim Materials |
|
SAE J1037 |
Windshield Washer Tubing |