|
SAE AMS-QQ-A-225/5 |
Aluminum Alloy, 2017, Bar, Rod, and Wire Rolled, Drawn, or Cold Finished-UNS A92017 |
|
SAE AMS 3196F |
Sponge, Silicone Rubber Closed Cell, Firm |
|
SAE AMS 4981E |
Titanium Alloy Bars, Wire, and Forgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation Heat Treated-UNS R56260 |
|
SAE AMS 5894B |
Cobalt Alloy, Bars, Sheet, and Plate 60Co - 28Cr - 4.5W - 1.15C Solution Heat Treated-UNS R30016 |
|
SAE AMS 2449 |
Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels |
|
SAE AMS 4016L |
Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-H32) Strain Hardened, Quarter-Hard, and Stabilized-UNS A95052 |
|
SAE AMS-L-P-391 |
Plastic Sheets, Rods and Tubing, Rigid Cast, Methacrylate Multiapplication) |
|
SAE AMS 2442A |
Magnetic Particle Acceptance Criteria for Parts |
|
SAE AMS 4920D |
Titanium Alloy, Forgings 6AI - 4V Alpha-Beta or Beta Processed, Annealed-UNS R56400 |
|
SAE AMS 5668J |
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 7.0Fe - 2.5Ti - 1.0Cb (Nb) - 0.70Al 2100 °F (1149 °C) Solution and Precipitation Heat Treated |
|
SAE AMS 2372E |
Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings |
|
SAE AMS 2632A |
Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7mm) and under in Cross-Sectional Thickness |
|
SAE AMS 5661F |
Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated-Composition similar to UNS N09901 |
|
SAE AMS 5743J |
Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated, Sub-Zero Cooled, Equalized, and Over-Tempered-UNS S35500 |
|
SAE AMS 2431/4C |
Peening Media (AWS) Conditioned Stainless Steel Cut Wire Shot |
|
SAE AMS 4121H |
Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated-UNS A92014 |
|
SAE AMS 4214H |
Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Stabilized-UNS A03550 |
|
SAE AMS 5898A |
Steel, Corrosion Resistant, Bars, Wire, and Forgings 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure |
|
SAE AMS 2280B |
Trace Element Control Nickel Alloy Castings |
|
SAE AMS 2526C |
Molybdenum Disulfide Coating, Thin Lubricating Film Impingement Applied |
|
SAE AMS 4786G |
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range-UNS P00700 |
|
SAE AMS 5568F |
Steel, Corrosion and Heat Resistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation-Hardenable-UNS S17700 |
|
SAE AMS 2672F |
Brazing, Aluminum Torch or Furnace |
|
SAE AMS 3611D |
Plastic Sheet, Polycarbonate General Purpose |
|
SAE AMS 10139A |
Zee - Unequal Leg Extruded-FSC 9540 |
|
SAE AMS 5112L |
(R) Carbon Steel, Wire Spring Quality Music Wire 0.70 - 1.00C Cold Drawn-UNS G10900 |
|
SAE AMS 6471F |
Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) Consumable Electrode Vacuum Melted-UNS K24065 |
|
SAE AMS 4290K |
Aluminum Alloy, Die Castings 9.5Si - 0.50Mg (360.0-F) As Cast-UNS A03600 |
|
SAE AMS 7725D |
Tungsten Heavy Alloy Shapes, Sintered, High Density |
|
SAE AMS 7879D |
Tungsten Carbide-Cobalt Powder Cast and Crushed |
|
SAE AMS 2434C |
Plating, Tin-Zinc Alloy |
|
SAE AMS 4044K |
Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-0) or when specified, As Fabricated (7075-F)-UNS A9075 |
|
SAE AMS 4225D |
Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated |
|
SAE AMS 4610N |
Brass, Free-Cutting Bars and Rods 61.5Cu - 35Zn - 3.1Pb Half Hard (H02)-UNS C36000 |
|
SAE AMS 4862F |
Manganese Bronze, Sand and Centrifugal Castings 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe High Strength, as Cast-UNS C86300 |
|
SAE AMS-B-20148 |
Brazing Sheet, Aluminum Alloy-Should Be Used Instead of MIL-B-20148D, Which Was Cancelled on 21 September 1998 |
|
SAE AMS-C-81562 |
Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited) |
|
SAE AMS-QQ-A-225/3A |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 2011-UNS A92011 |
|
SAE AMS-T-81915 |
Titanium and Titanium-Alloy Castings, Investment-Should Be Used Instead of MIL-T-81915, Which Was Cancelled on 21 September 1998 |
|
SAE AMS 4140H |
Aluminum Alloy Die Forgings 4.0Cu - 2.0Ni - 0.68Mg (2018-T61) Solution and Precipitation Heat Treated-UNS A92018 |
|
SAE AMS 4765E |
Silver Alloy, Brazing Filler Metal 56Ag - 42Cu - 2.0Ni 1420 to 1640 Degrees F (771 to 893 Degrees C) Solidus-Liquidus Range-UNS P07560 |
|
SAE AMS 4779G |
Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range-UNS N99640 |
|
SAE AMS 5773E |
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation Hardenable-S45000 |
|
SAE AMS 5632H |
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440F) Free-Machining, Annealed-UNS S44020 (Type I) or UNS S44023 (Type II) |
|
SAE AMS 4152M |
Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated-UNS A92024 |
|
SAE AMS 4651C |
Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be (CDA 172) Hard Temper (TD04)-UNS C17200 |
|
SAE AMS 4905D |
Titanium Alloy, Damage-Tolerant Grade Plate 6Al - 4V Beta Annealed-UNS R56400 |
|
SAE AMS 5024H |
Steel, Bars, Forgings, and Tubing, Free-Cutting 1.5Mn (0.32 - 0.39C) (SAE 1137)-UNS G11370 |
|
SAE AMS-DTL-22499/2A |
Shim Stock, Laminated, Brass-FSC 9535 |
|
SAE AMS 4080M |
(R) Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0) Annealed-UNS A96061 |
|
SAE AMS-C-7438 |
Core Material, Aluminum, for Sandwich Construction-FSC 5680 |
|
SAE AMS 2440B |
(R) Inspection of Ground, Chromium Plated Steel Parts |
|
SAE AMS 4101C |
Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T851) Solution Heat Treated, Stretched, and Precipitation Heat Treated-UNS A92124 |
|
SAE AMS 7498M |
Rings, Flash Welded Titanium and Titanium Alloys |
|
SAE AMS-I-23053/3 |
Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinyl Chloride, Semi Rigid, Crosslinked and Non-Crosslinked-FSC 5970 |
|
SAE AMS 5704H |
Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 Degrees F (996 to 1038 Degrees C) Solution, Stabilization, and Precipitation Heat Treated |
|
SAE AMS-QQ-A-250/18A |
Aluminum 7075, Plate and Sheet Alclad One Side-UNS A97075 |
|
SAE AMS 4031G |
Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-0) Annealed-UNS A92219 |
|
SAE AMS 7310J |
Rings, Piston, Cast Iron As Cast-Reaffirmed Non-current April 2006 |
|
SAE AMS 4984D |
Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile Strength-UNS R56410 |
|
SAE AMS-QQ-A-200/4B |
Aluminum Alloy 5083, Bar, Rod, Shapes, Tube, and Wire, Extruded-UNS A95083 |
|
SAE AMS-T-81914/1 |
Tubing, Plastic, Flexible, Convoluted, Polytetrafluoroethylene, Standard Convolutions-FSC 9330; Should Be Used Instead of MIL-T-81914/1(AS), Which Was Inactivated for New Design on 31 August 1999 |
|
SAE AMS 2244C |
(R) Tolerances Titanium and Titanium Alloy Tubing |
|
SAE AMS 2487A |
(R) Anodic Treatment of Titanium and Titanium Alloys Solution pH 12.4 Maximum |
|
SAE AMS 3654C |
Tubing, Electrical Insulation Light Wall, Extruded Polytetrafluoroethylene (PTFE) |
|
SAE AMS 4701F |
Copper Wire, Oxygen-Free 99.95(Cu+Ag) Annealed-UNS C10200 |
|
SAE AMS 4113E |
Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated-UNS A96061 |
|
SAE AMS 2800D |
Identification Finished Parts |
|
SAE AMS 5545E |
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treatable Precipitation Heat Treated-UNS N07041 |
|
SAE AMS 4956E |
Titanium Alloy Welding Wire 6Al - 4V, Extra Low Interstitial Environment Controlled Packaging-UNS R56408 |
|
SAE AMS 3266 |
Sealing Compound, Polythioether Elastomeric Two Part Electrically Conductive |
|
SAE AMS 4123H |
Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated-UNS A97075 |
|
SAE AMS 2435G |
Coating, Tungsten Carbide-Cobalt Coating, Detonation Process |
|
SAE AMS 5905B |
Steel, Corrosion Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength-UNS S30200 |
|
SAE AMS 6450H |
Steel, Spring Wire and Springs (R) 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) Annealed and Cold Drawn-UNS G61500 |
|
SAE AMS 6529B |
Steel, Bars 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Special Aircraft-Quality Cleanliness Normalized |
|
SAE AMS 2444A |
(R) Coating, Titanium Nitride Physical Vapor Deposition |
|
SAE AMS-T-6841 |
Tape and Sheet, Adhesive, Rubber and Cork Composition-FSC 9320; Should Be Used Instead of MIL-T-6841, Which Was Cancelled on 31 August 1999 |
|
SAE AMS 2431/5A |
Peening Media Case Hardened Steel Peening Balls |
|
SAE AMS 3197K |
Sponge, Chloroprene (CR) Rubber Soft |
|
SAE AMS 4434L |
Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92-T6) Solution and Precipitation Heat Treated |
|
SAE AMS 5508F |
Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr - 2.0Ni - 3.0W Annealed-UNS S41800 |
|
SAE AMS 5569A |
Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing 19Cr - 9.5Ni - 0.03C Max Cold Drawn, 1/8 Hard Temper-UNS S30403 |
|
SAE AMS 4375K |
Sheet and Plate, Magnesium Alloy Annealed and Recrystallized 3.0AI - 1.0Zn - 0.20Mn (AZ31B-0)-UNS M11311 |
|
SAE AMS 3670/1B |
UNFILLED POLYAMIDE-IMIDE BAR, ROD, AND SHAPES |
|
SAE AMS-T-22085 |
Tapes, Pressure-Sensitive, Adhesive, Preservation and Sealing-FSC 7510; Should Be Used Instead of MIL-T-22085E, Which Was Cancelled on 10 September 1999 |
|
SAE AMS-WW-T-700/2A |
Tube, Aluminum, Alloy, Drawn, Seamless, 3003-UNS A93003 |
|
SAE AMS 2304A |
Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure |
|
SAE AMS 4147D |
Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged-UNS A97075 |
|
SAE AMS 5833C |
Cobalt Alloy, Corrosion and Heat-Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated and Cold Drawn-UNS R30003 |
|
SAE AMS 5880C |
Steel, Corrosion Resistant, Bars, Wire, Forgings, and Wire 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) for Bearing Applications-UNS S44004 |
|
SAE AMS-A-81596 |
Aluminum Foil for Sandwich Construction |
|
SAE AMS 4177D |
Core, Flexible Honeycomb, Aluminum Alloy For Sandwich Construction 5056, 350 (177) |
|
SAE AMS 5930A |
Steel, Corrosion-Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted-Composition similar to UNS S42670 |
|
SAE AMS 5641G |
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18.5Cr - 10Ni - 0.22Se (SAE 30303Se) Free-Machining; Swaging or Upsetting Solution Heat Treated |
|
SAE AMS 5590E |
Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degrees F (1066 Degrees C) Solution Heat Treated-UNS N07718 |
|
SAE AMS 5621E |
Steel, Corrosion Resistant, Bars, Wire, and Forgings 13Cr (0.30-0.40C) (SAE 51420) Annealed-UNS S42000 |
|
SAE AMS 4534B |
Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)-UNS C17200 |
|
SAE AMS 4845G |
Tin Bronze Castings Sand and Centrifugal 87.5Cu - 10Sn - 2Zn as Cast |
|
SAE AMS 5657C |
Steel Bars and Forgings, Corrosion and Moderate Heat-Resistant 15Cr - 7.1Ni - 2.5Mo - 1.1Al-UNS S15700 |
|
SAE AMS-QQ-A-225/7A |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 5052-UNS A95052 |
|
SAE AMS 4860E |
Manganese Bronze, Sand and Centrifugal Castings 58Cu - 39Zn - 1.2Fe - 1.0Al - 0.80Mn as Cast-UNS C86500 |
|
SAE AMS-T-23397 |
Tapes, Pressure Sensitive Adhesive, for Masking During Paint Stripping Operations-Should Be Used Instead of MIL-T-23397B, Which Was Cancelled on 21 September 1998 |
|
SAE AMS 4418G |
Magnesium Alloy, Sand Castings 2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat Treated |
|
SAE AMS 2451/2A |
Plating, Brush, Nickel Low Stress, Hard Deposit |
|
SAE AMS 3198K |
Sponge, Chloroprene (CR) Rubber Medium Stiffness |
|
SAE AMS 4100D |
Aluminum Alloy, Alclad, Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761) Solution and Precipitation Heat Treated-UNS A87475 |
|
SAE AMS 5370D |
Steel, Corrosion and Heat-Resistant, Investment Castings 19Cr - 9.5Ni (CF-3) Solution Heat Treated |
|
SAE AMS 5562D |
Steel, Corrosion and Heat Resistant, Seamless Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat Treated-UNS S21904 |
|
SAE AMS 1526B |
Cleaner for Aircraft Exterior Surfaces Water-Miscible, Pressure-Spraying Type |
|
SAE AMS 4229D |
Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged |
|
SAE AMS 4978E |
Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed |
|
SAE AMS 4616F |
Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved |
|
SAE AMS 5801F |
Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 39Co - 22Cr - 22Ni - 14.5W - 0.07La-UNS R30188 |
|
SAE AMS 5080J |
Steel, Bars, Forgings, and Tubing 0.31 - 0.38C (SAE 1035)-UNS G10350 |
|
SAE AMS 5719D |
Steel Bars, Wire, Forgings, Tubing, Rings, and Extrusions, Corrosion Resistant 11.8 Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed, Vacuum Arc or Electroslag Remelted-UNS S64152 |
|
SAE AMS 3255 |
Sealing Tape, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant |
|
SAE AMS 5912A |
Steel, Corrosion Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength-UNS S30400 |
|
SAE AMS 5654E |
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60(Cb + Ta) (SAE 30347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated-UNS S34700 |
|
SAE AMS 3347B |
Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 45 - 55 |
|
SAE AMS 4036K |
Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn Alclad One Side 2024 and 1-1/2% Alclad One Side 2024-T3 Sheet 1-1/2% Alclad One Side 2024-T351 Plate-UNS A82024 |
|
SAE AMS 3132G |
Varnish, Phenolic Resin Corrosion-Preventive |
|
SAE AMS 4971H |
Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable-UNS R56620 |
|
SAE AMS 5398F |
Steel, Corrosion Resistant, Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22(Cb + Ta) - 2.8Cu Solution Heat Treated-UNS J92200 |
|
SAE AMS 5591K |
Steel, Corrosion and Heat-Resistant, Tubing, Seamless 12.5Cr (SAE 51410) Annealed-UNS S41000 |
|
SAE AMS 2755E |
Nitriding, Molten Salt Bath |
|
SAE AMS 2816V |
Identification Welding Wire, Tab Marking Method |
|
SAE AMS 3267/1A |
Sealing Compound, Low Adhesion, Corrosion Inhibiting 200 to 600 Poises (20 to 60 Pa.s), 1/2 Hour Application Time (A-1/2) |
|
SAE AMS 5857B |
Steel, Corrosion Resistant, Bars and Wire 19Cr - 10Ni (SAE 30304) High Yield Strength Solution Heat Treated and Cold Worked-UNS S30400 |
|
SAE AMS 6475H |
Steel, Nitriding, Bars, Forgings, and Tubing, 1.1Cr - 3.5Ni - 0.25Mo - 1.2AI (0.21 - 0.26C)-UNS K52355 |
|
SAE AMS-DTL-23053/14 |
Insulation Sleeving, Electrical, Heat Shrinkable, Ethylene-Tetrafluoroethylene Fluoropolymer, Semi-Rigid-FSC 5970; Should Be Used Instead of MIL-DTL-23053/14B, Which Was Cancelled on 16 September 1999 |
|
SAE AMS 2728A |
Heat Treatment of Wrought Copper Beryllium Alloy Parts |
|
SAE AMS 4006K |
Aluminum Alloy, Sheet and Plate 1.25Mn - 0.12Cu (3003-0) Annealed-UNS A93003 |
|
SAE AMS 5514G |
Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated-UNS S30500 |
|
SAE AMS 5565K |
Steel, Corrosion Resistant, Welded Tubing 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated-UNS S30400 |
|
SAE AMS 3207M |
Chloroprene (CR) Rubber Weather Resistant 25 - 35 |
|
SAE AMS 5713J |
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6A1 - 0.006B Vacuum Melted, Solution and Precipitation Heat Treated-UNS N07041 |
|
SAE AMS 4952D |
Titanium Alloy, Welding Wire 6AI - 2Sn - 4Zr - 2Mo-UNS R54620 |
|
SAE AMS 5671G |
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable-UNS N07750 |
|
SAE AMS 7875C |
Powder, Chromium Carbide Plus Nickel-Chromium Alloy 75Cr2C3 + 25(80Ni - 20Cr Alloy) |
|
SAE AMS 4333B |
Aluminum Alloy, Die Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged-Composition similar to UNS A97050 |
|
SAE AMS 4403 |
Aluminum Alloy, Die Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged-UNS A97085 |
|
SAE AMS 4088K |
Aluminum Alloy, Drawn, Seamless Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked-UNS A92024 |
|
SAE AMS 5843E |
Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened, and Aged-UNS R30159 |
|
SAE AMS-STD-185 |
Identification Marking of Copper and Copper Base Alloy Mill Products |
|
SAE AMS 3636G |
Tubing, Plastic, Electrical Insulation Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio |
|
SAE AMS 3678B |
Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components |
|
SAE AMS 5940B |
Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation-Resistant, Low Expansion Solution Heat Treated, Precipitation-Hardenable |
|
SAE AMS 6305E |
Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted-UNS K14675 |
|
SAE AMS 7701E |
Nickel-Iron Alloy, Magnetic, Sheet and Strip Annealed |
|
SAE AMS 3305H |
Silicone, Rubber General Purpose 80 Durometer |
|
SAE AMS 4001J |
Aluminum Sheet and Plate 0.12Cu (1100-0) Annealed |
|
SAE AMS 5397C |
Alloy Castings, Investment, Corrosion and Heat Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr Vacuum-Melted, Vacuum Cast as Cast-UNS N13100; Reaffirmed Noncurrent January 2002 |
|
SAE AMS 5934 |
Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation-Hardenable-UNS S13800 |
|
SAE AMS 6323K |
Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)-UNS G87400 |
|
SAE AMS-DTL-23053/17 |
Insulation Sleeving, Electrical, Heat Shrinkable, Flame Retarded, Modified Polyolefin, Flexible, Crosslinked-FSC 5970; Should Be Used Instead of MIL-DTL-23053/17B, Which Was Cancelled on 16 September 1999 |
|
SAE AMS 4166F |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged-UNS A97075 |
|
SAE AMS 4212J |
(R) Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated-UNS A03550 |
|
SAE AMS 4339A |
Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged-UNS A92024 |
|
SAE AMS 3612B |
Polyester Film Electrical Grade, General Purpose |
|
SAE AMS 4096B |
Aluminum Alloy Sheet and Plate, Alclad 6.3Cu - 0.30Mn- 0.18Zr - 0.10V - 0.06Ti (Alclad 2219-O) Annealed-UNS A92219 |
|
SAE AMS 4156K |
Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6) Solution and Precipitation Heat Treated-UNS A96063 |
|
SAE AMS 4178D |
Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction 5052, 350 (177) |
|
SAE AMS 5660K |
Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated-UNS N09901 |
|
SAE AMS 5690L |
Steel, Corrosion and Heat Resistant, Wire 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat Treated-UNS S31600 |
|
SAE AMS-G-25871 |
Glass, Laminated, Aircraft Glazing |
|
SAE AMS 4429 |
Magnesium Alloy Castings, Sand 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6) Solution and Precipitation Heat Treated-UNS M12310 |
|
SAE AMS 5564C |
Steel, Corrosion Resistant, Tubing 19Cr - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper-UNS S30400 |
|
SAE AMS 4182F |
Aluminum Alloy, Wire 5.0Mg - 0.12Mn - 0.12Cr (5056-0) Annealed-UNS A95056 |
|
SAE AMS 5315D |
Ductile (Nodular) Iron Castings, Sand 60,000 psi (415 MPa) Tensile Strength Ferritize Annealed-Reaffirmed Noncurrent May 2005; UNS F33101 |
|
SAE AMS 5891B |
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La Annealed-UNS N06230 |
|
SAE AMS 3166B |
(R) Solvents, Cleaning, Cleaning Prior to Application of Sealing Compounds |
|
SAE AMS 5402C |
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) As Cast-UNS N26010 |
|
SAE AMS 5022N |
Steel Bars, Forgings, and Tubing, Free Cutting 0.14 - 0.20C (SAE 1117)-UNS G11170 |
|
SAE AMS 5642K |
Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining, Solution Heat Treated-UNS S34720 Type 1; UNS S34723 Type 2 |
|
SAE AMS 4126C |
Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated-UNS A97075 |
|
SAE AMS 4958C |
Titanium Alloy Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground-UNS R58640 |
|
SAE AMS 5501E |
Steel, Corrosion Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength-UNS S30400 |
|
SAE AMS 5895D |
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1750 Degrees F (954 Degrees C) Solution Heat Treated, Welding Grade Precipitation Hardenable-UNS S66286 |
|
SAE AMS 3021D |
Fluid, Reference for Testing Di-Ester (Polyol) Resistant Material |
|
SAE AMS 4783F |
Cobalt Alloy, High Temperature Brazing Filler Metal 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050 to 2100 Degrees F (1121 to 1149 Degrees C) Solidus-Liquidus Range-UNS R30040 |
|
SAE AMS 5627G |
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr (SAE 51430) Annealed-UNS s43000 |
|
SAE AMS 2745A |
Induction Hardening of Steel Parts |
|
SAE AMS 3215L |
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75 |
|
SAE AMS 4788A |
Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 Degrees F (660 to 707 Degrees C) Solidus-Liquidus Range |
|
SAE AMS 5521H |
Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 25Cr - 20Ni (SAE 30310S) Solution Heat Treated-UNS S31008 |
|
SAE AMS-QQ-A-225/2A |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 3003-UNS A93003 |
|
SAE AMS 2232G |
Tolerances Carbon Steel, Sheet, Strip, and Plate |
|
SAE AMS 3045D |
Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Ready-to-Use |
|
SAE AMS 3232M |
Asbestos and Synthetic Rubber Sheet Hot Oil Resistant |
|
SAE AMS 7272F |
Rings, Sealings, Butadiene-Acrylonitrile (NBR) Rubber Synthetic Lubricant Resistant 65 - 75 |
|
SAE AMS 3138/1B |
(R) Coating Material, Fluorocarbon (FKM), Elastomeric Rain-Erosion Resistant, Black |
|
SAE AMS 4154N |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated-UNS A97075 |
|
SAE AMS 6302H |
Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C)-UNS K23015 |
|
SAE AMS 6378F |
Steel Bars 1.0Cr - 0.20Mo - 0.45Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield Strength Free Machining-UNS K11542 |
|
SAE AMS 3065H |
Compound, Corrosion Preventive Thin Film, Fingerprint Removing |
|
SAE AMS 3632E |
Tubing, Plastic, Electrical Insulation Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio |
|
SAE AMS 4676E |
Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 66.5Ni - 3.0Al - 0.62Ti - 28Cu Hot-Finished, Precipitation Hardenable-UNS N05500 |
|
SAE AMS 2451/3A |
Plating, Brush, Nickel Low Stress, Low-Hardness Deposit |
|
SAE AMS 4041Q |
Aluminum Alloy, Alclad Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn Alclad 2024 and 1-1/2% Alclad 2024, -T3 Flat Sheet; 1-1/2% Alclad 2024-T351 Plate |
|
SAE AMS 4986C |
Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength |
|
SAE AMS-C-81986 |
Core Material, Plastic Honeycomb, Nylon Paper Base; for Aircraft Structural Applications-Should Be Used Instead of MIL-C-81986, Which Was Cancelled on December 18, 1998 |
|
SAE AMS 3677 |
Fabric, Polybenzimidazole (PBI) Polyamide Fiberglass Polytetrafluoroethylene (PTFE) Impregnated, Sintered |
|
SAE AMS 4049K |
Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated-UNS A97075 |
|
SAE AMS 4111D |
Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated-UNS A97049 |
|
SAE AMS 3310 |
Rubber, Silicone - Flame Retardant, Low Smoke Density, High Strength 65 - 75 Durometer Color White |
|
SAE AMS 4029K |
Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated-UNS A92014 |
|
SAE AMS 5776F |
Steel, Corrosion and Heat-Resistant, Welding Wire 12.5Cr (SAE 51410)-UNS S41001 |
|
SAE AMS-QQ-A-250/14A |
Aluminum Alloy 7178, Plate and Sheet |
|
SAE AMS 4916J |
Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed-UNS R54810 |
|
SAE AMS 4437E |
Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged-UNS M11914 |
|
SAE AMS 4771H |
Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 Degrees F (632 to 688 Degrees C) Solidus-Liquidus Range-UNS P07501 |
|
SAE AMS 3240J |
Chloroprene (CR) Rubber Weather Resistant 35 - 45 |
|
SAE AMS 3662C |
Polytetrafluoroethylene Film General Purpose Grade |
|
SAE AMS 4910N |
Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn Annealed-UNS R54520 |
|
SAE AMS 6940 |
Titanium Alloy Bars, Forgings and Forging Stock 3.0Al - 2.5V Annealed-UNS R56320 |
|
SAE AMS 3668C |
Polytetrafluoroethylene (PTFE) Moldings Premium Grade, as Sintered |
|
SAE AMS 4035K |
Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-0) Annealed-UNS A92024 |
|
SAE AMS 4989A |
Titanium Alloy Sheet, Strip, and Plate 3Al-2.5V Annealed-UNS R56320 |
|
SAE AMS 5336F |
Steel, Investment Castings 0.95Cr - 0.20Mo (0.25 - 0.35C) (SAE 4130 Mod) Normalized or Normalized and Tempered-UNS J13046 |
|
SAE AMS 5441 |
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 degrees F (968 degrees C) Solution Heat Treated, Precipitation-Hardenable-UNS N07818 |
|
SAE AMS 5879C |
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Foil 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Cold Rolled and Annealed-UNS N06625/N06626 |
|
SAE AMS 2525C |
Graphite Coating, Thin Lubricating Film Impingement Applied |
|
SAE AMS 3100/3 |
Adhesion Promoter for Polysulfide Sealing Compounds Water Based |
|
SAE AMS 5744E |
Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi (1172 MPa) Tensile Strength-UNS S35500 |
|
SAE AMS 5763C |
Steel, Corrosion Resistant Bars, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.50 (Cb + Ta) - 1.5Cu Solution Heat Treated-UNS S45000 |
|
SAE AMS 6458H |
Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted, Environment Controlled Packaging-UNS K23015 |
|
SAE AMS 6408B |
Steel, Hotwork Tool, Bars and Forgings 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed-UNS T20813 |
|
SAE AMS 4979F |
Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Solution and Precipitation Heat Treated-UNS R56620 |
|
SAE AMS 5391F |
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 73Ni - 0.14C - 13Cr - 4.5Mo - 2.3Cb - 0.75Ti - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As-Cast-UNS N07713 |
|
SAE AMS 2368B |
Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock |
|
SAE AMS 3670B |
Polyamide-Imide Bar, Rod, and Shapes Molded or Extruded |
|
SAE AMS 5354E |
(R) Steel, Corrosion and Heat Resistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered-UNS J91631 |
|
SAE AMS 5899A |
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) Powder Metallurgy Product, Hot Isostatically Pressed-UNS S44004 |
|
SAE AMS 5010K |
Steel Bars Free Machining Cold Drawn (SAE 1212 or SAE 1215)-UNS G12120 |
|
SAE AMS 5532G |
Iron Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N Solution Heat Treated-UNS R30155 |
|
SAE AMS 5876C |
Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated and Cold Rolled-UNS R30003 |
|
SAE AMS-HH-G-101 |
Gasket, Metallic-Encased |
|
SAE AMS-M-45202A |
Magnesium Alloys, Anodic Treatment of |
|
SAE AMS 4376G |
Plate, Magnesium Alloy Cold Rolled and Partially Annealed 3.0AI - 1.0Zn - 0.20Mn (AZ31B-H26)-UNS M11311 |
|
SAE AMS 4999 |
Titanium Alloy Laser Deposited Products 6Al - 4V Annealed |
|
SAE AMS 5352E |
Steel, Corrosion-Resistant, Investment Castings 17Cr - 0.55Mo (0.95 - 1.20C) Annealed-UNS J91639 |
|
SAE AMS 6362F |
Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength-UNS G41300 |
|
SAE AMS 2634B |
Ultrasonic Inspection Thin Wall Metal Tubing |
|
SAE AMS 5541F |
Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 73Ni - 15.5Cr - 2.4Ti - 0.7Al - 7.0Fe Annealed-UNS N07722 |
|
SAE AMS 5620G |
Steel, Corrosion and Heat Resistant, Bars, Wire,and Forgings 13Cr (0.30 - 0.40C) (SAE 51420F, 51420Se) Free-Machining Grade-UNS S42020 (Type 2); S42023 (Type 1) |
|
SAE AMS 5651J |
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 25Cr - 20Ni (SAE 30310) Solution Heat Treated-UNS S31008 |
|
SAE AMS 6900 |
Titanium Alloy Bars, Forgings and Forging Stock 5Al - 2.5Sn Annealed-UNS R54520 |
|
SAE AMS 3046E |
Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged |
|
SAE AMS 3715D |
Core, Honeycomb, Glass/Phenolic |
|
SAE AMS 4446B |
Magnesium Alloy, Sand Castings 8.7Al - 0.70Zn - 0.26Mn (AZ91E-T6) Solution and Precipitation Heat Treated-UNS M11919 |
|
SAE AMS 4635E |
Aluminum Bronze Bars, Rods, and Forgings 87Cu - 9Al - 3Fe Stress Relieved-UNS C62300 |
|
SAE AMS 6276J |
Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Consumable Electrode Vacuum Melted-UNS G86200 |
|
SAE AMS-I-7444 |
Insulation Sleeving, Electrical, Flexible |
|
SAE AMS 2762B |
Carburizing Carbon and Low-Alloy Steel Parts |
|
SAE AMS 3238E |
Butyl (IIR) Rubber Phosphate Ester Resistant 65 - 75 |
|
SAE AMS-S-83318A |
(R) Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities-Should be used instead of MIL-S-83318, which was cancelled on 28 September 1999; FSC 8030 |
|
SAE AMS-T-5066A |
Tubing, Carbon Steel (1025), (Aircraft Quality) |
|
SAE AMS 4116G |
Aluminum Alloy, Bars, Rods, and Wire 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4) Cold Finished, Solution Heat Treated-UNS A96061 |
|
SAE AMS 5711D |
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Solution Heat Treated-UNS N06635 |
|
SAE AMS 3260B |
Ethylene-Propylene-Diene (EPDM) Rubber General Purpose 45 - 55 |
|
SAE AMS 4015L |
Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25CR (5052-0) Annealed |
|
SAE AMS 4249A |
Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing)-UNS A43570 |
|
SAE AMS 4252B |
Aluminum Alloy, Plate 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T7751) Solution Heat Treated, Stress Relieved, and Overaged-UNS A97150 |
|
SAE AMS 3095A |
Paint: High Gloss For Airline Exterior System |
|
SAE AMS 3138/6B |
(R) Coating Material, Fluorocarbon (FKM) Elastomeric Anti-Static Topcoating, Color Matched |
|
SAE AMS 3205L |
Synthetic Rubber Low-Temperature Resistant 45 - 55 |
|
SAE AMS 3328A |
Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35 - 45 |
|
SAE AMS 4940 |
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength-UNS R50550 |
|
SAE AMS 5364C |
Steel, Corrosion and Heat-Resistant, Investment Castings 19.5Cr - 10.5Ni - 0.65Cb (CF-8C) Solution Heat Treated |
|
SAE AMS 4345B |
Aluminum Alloy, Extrusions 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T77511) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged-UNS A97150 |
|
SAE AMS 5884B |
Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb - 1.6Ti Solution Heat Treated, Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion-UNS N19909 |
|
SAE AMS 5897B |
Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 11Ni - 0.80Cb (SAE 30347) Solution Heat Treated and Cold Drawn, One- Eighth Hard Temper-UNS S34700 |
|
SAE AMS-QQ-W-428A |
Wire, Steel, Carbon (High Carbon, Round, for Mechanical Springs, General Purpose)-FSC 9505 |
|
SAE AMS-S-8559B |
Steel Bars, Carbon, AISI (1095), Aircraft Quality |
|
SAE AMS 3661C |
Polytetrafluoroethylene (PTFE) Film Premium Grade |
|
SAE AMS 4003H |
Aluminum Alloy, Sheet and Plate 0.12 Cu (1100-H14) Strain Hardened -UNS A91100 |
|
SAE AMS 4128D |
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching-UNS A96061 |
|
SAE AMS 5749E |
Steel, Corrosion Resistant, Bars, Wire, Forgings, and Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted-UNS S42700 |
|
SAE AMS-QQ-A-200/6B |
Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and Wire, Extruded-UNS A95454 |
|
SAE AMS 3315F |
Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced |
|
SAE AMS 3659C |
Polytetrafluoroethylene Extrusions Premium Strength, Sintered and Stress-Relieved |
|
SAE AMS 4775H |
Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 to 1970 °F (977 to 1077 °C) Solidus-Liquidus Range-UNS N99600 |
|
SAE AMS 4918L |
Titanium Alloy, Sheet, Strip, and Plate 6AI - 6V - 2Sn Annealed-UNS R56620 |
|
SAE AMS 3415D |
Flux, Aluminum Dip Brazing 1030 Degrees F (554 Degrees C) or Lower Liquidus |
|
SAE AMS 3617D |
Nylon Plastic, Moldings and Extrusions |
|
SAE AMS 6447F |
Steel, Bars, Forgings, and Tubing 1.4Cr (0.98 - 1.10C) (SAE 52100) Electroslag Remelted-UNS G52986 |
|
SAE AMS 6455J |
Steel, Sheet, Strip, and Plate 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150)-UNS G61500 |
|
SAE AMS 2281A |
Trace Element Control Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products for High-Temperature, High-Stressed Applications |
|
SAE AMS 3374/3 |
Sealing Compound, Two-Part, Condensation Cured (Type 3) Firewall Sealant |
|
SAE AMS 3670/4C |
Polyamide-Imide Bar, Rod, and Shapes 30% Glass Fiber |
|
SAE AMS 5778F |
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 72Ni - 15.5Cr - 1.0Cb - 2.4Ti - 0.70Al - 7.0Fe |
|
SAE AMS 7881 |
Tungsten Carbide-Cobalt Powder Agglomerated and Sintered |
|
SAE AMS 3267/4A |
Sealing Compound, Low Adhesion, Corrosion Inhibiting 9,000 to 14,000 Poises (900 to 1400 Pa.s), 2 Hour Application Time (B-2) |
|
SAE AMS 3374/4 |
Sealing Compound, Two-Part, Polysulfide (Type 4) Firewall Sealant |
|
SAE AMS 4348D |
Core, Honeycomb, Aluminum Alloy, Corrosion Inhibited for Sandwich Construction 5052, 350 (177) |
|
SAE AMS 2245B |
Tolerances Titanium and Titanium Alloy Extruded Bars, Rods, and Shapes |
|
SAE AMS 3375B |
Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing |
|
SAE AMS 5377F |
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 73Ni - 12Cr - 4.5Mo - 2.0Cb - 0.70Ti - 0.05C - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As-Cast |
|
SAE AMS 4855F |
Leaded Red Brass, Sand and Centrifugal Castings 85Cu - 5.0Sn - 5.0Pb - 5.0Zn as Cast-UNS C83600 |