|
SAE AMS 5357B |
Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable-UNS J92110 |
|
SAE AMS 1547 |
Cleaner, Anodic, Electrolytic, Alkaline for Steel, Tank Type |
|
SAE AMS 3248B |
Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55 - 65 |
|
SAE AMS 5896A |
Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti (SAE 30321) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper-UNS S32100 |
|
SAE AMS 6385G |
Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C)-UNS K23015 |
|
SAE AMS 10140A |
I - Section - Extruded-FSC 9540 |
|
SAE AMS 3138/2B |
(R) Coating Material, Fluorocarbon (FKM) Elastomeric Rain-Erosion and Thermal-Flash Resistant, White |
|
SAE AMS 4165H |
Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened-UNS A92024 |
|
SAE AMS 5376G |
Alloy, Corrosion and Heat Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N As Cast-UNS R30155 |
|
SAE AMS 5810A |
Steel, Corrosion and Heat Resistant, Flat Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 Degrees F (982 Degrees C) Solution Treated, Cold Drawn or Cold Rolled and Aged, Consumable Electrode Melted-UNS S66286 |
|
SAE AMS 6278C |
Steel, Bars, Forgings, and Tubing 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted-UNS K91231 |
|
SAE AMS 2222J |
Tolerances Copper and Copper Alloy Sheet, Strip, and Plate |
|
SAE AMS 2425E |
Plating, Gold for Thermal Control |
|
SAE AMS 3267/2A |
Sealing Compound, Low Adhesion, Corrosion Inhibiting 9,000 to 14,000 Poises (900 to 1400 Pa.s), 1/2 Hour Application Time (B-1/2) |
|
SAE AMS 4442F |
Magnesium Alloy Sand Castings 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5) Precipitation Heat Treated-UNS M12330 |
|
SAE AMS 4597 |
Copper-Nickel-Tin Alloy, Bars and Rods 77Cu - 15Ni - 8Sn Solution Annealed, Cold Finished and Spinodal Hardened (TX TS) |
|
SAE AMS 5500E |
Steel, Corrosion-Resistant, Laminated, Sheet Surface Bonded-UNS S30200 |
|
SAE AMS 5588F |
Nickel Alloy, Corrosion and Heat Resistant, Welded Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated-UNS N06002 |
|
SAE AMS 5826D |
Steel, Corrosion and Heat-Resistant, Welding Wire 15Cr - 5.1Ni - 0.30Cb(Nb) - 3.2Cu-UNS S15500 |
|
SAE AMS 5860F |
Steel, Corrosion Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Multiple Melted, Solution Heat Treated, Precipitation Hardenable-UNS S45500 |
|
SAE AMS 6267G |
Steel Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) Electroslag Remelted or Consumable Electrode Vacuum Remelted-UNS G93106 |
|
SAE AMS 2804C |
Identification Castings |
|
SAE AMS 2980A |
Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction |
|
SAE AMS 4011C |
Aluminum, Foil and Light Gage Sheet 99.45Al (1145-0) Annealed-UNS A91145 |
|
SAE AMS 4191H |
Aluminum Alloy, Welding Wire 6.3Cu - 0.30Mn - 0.18Zr - 0.15Ti - 0.10V (2319)-UNS A92319 |
|
SAE AMS 4769F |
Silver Alloy, Brazing Filler Metal 45Ag - 24Cd - 16Zn - 15Cu 1125 to 1145 Degrees F (607 to 618 Degrees C) Solidus-Liquidus Range-UNS P07450 |
|
SAE AMS 5758G |
Alloy, Corrosion-Resistant, Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated for Work Strengthening-UNS R30035 |
|
SAE AMS 3689B |
Adhesive, Foaming, Honeycomb, Core Splice, Structural -54 Degrees to +177 Degrees C (-65 Degrees to +350 Degrees F) |
|
SAE AMS 3846D |
Cloth, Quartz Finished for Resin Laminates |
|
SAE AMS 5042L |
Steel, Sheet and Strip 0.15 Carbon, Maximum Forming Grade-UNS G 10100 |
|
SAE AMS 3323 |
Sponge, Fluorosilicone (FVM) Rubber Closed Cell |
|
SAE AMS 5047F |
Steel, Sheet and Strip 0.08 - 0.13C, Aluminum Killed (SAE 1010) Deep Forming Grade-UNS G10100 |
|
SAE AMS 5670F |
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation-Hardenable-Composition similar to UNS N07750 |
|
SAE AMS 2980/1A |
Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 1 - General Requirements |
|
SAE AMS 4236B |
Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged |
|
SAE AMS 3160H |
Solvent, Petroleum |
|
SAE AMS 3688B |
Adhesive, Foaming, Honeycomb Core Splice, Structural -55 Degrees C to +82 Degrees C (-65 Degrees F to +180 Degrees F) |
|
SAE AMS 4293 |
Aluminum Alloy Extrusions 7.9Zn-1.6Cu-2.2Mg-0.16Cr (7249-T76511) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged |
|
SAE AMS 4329A |
Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged-UNS A97085 |
|
SAE AMS 5679G |
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe-UNS N06062 |
|
SAE AMS 6905 |
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Duplex Annealed-UNS R54620 |
|
SAE AMS 6936 |
Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn Annealed-UNS R56620 |
|
SAE AMS 7255C |
Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 to 80 |
|
SAE AMS 2426D |
Coating, Cadmium Vacuum Deposition |
|
SAE AMS 3100/2A |
Adhesion Promoter for Polysulfide Sealing Compounds Nonrestricted Solvent |
|
SAE AMS 4401 |
Aluminum Alloy Plate (7140-T7451) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged |
|
SAE AMS-QQ-A-250/19A |
Aluminum Alloy 5086, Plate and Sheet for Sea Water Applications |
|
SAE AMS 1476B |
Deodorant, Aircraft Toilet |
|
SAE AMS 3212N |
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 55 - 65 |
|
SAE AMS 3726C |
Shims, Filled Resin Compound |
|
SAE AMS 4805E |
Bearings, Sintered Metal Powder 89Cu - 10Sn Oil Impregnated |
|
SAE AMS 5360F |
Steel, Corrosion and Heat-Resistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated-UNS J92951 |
|
SAE AMS-QQ-A-250/15B |
Aluminum Alloy Alclad 7178, Plate and Sheet-Composition similar to UNS A87178 |
|
SAE AMS-WW-T-700/1A |
Tube, Aluminum, Drawn, Seamless, 1100 |
|
SAE AMS 4235A |
Aluminum Alloy Castings, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71) Solution and Precipitation Heat Treated-UNS A12060 |
|
SAE AMS 5559J |
Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin Wall Solution Heat Treated-UNS S32100 |
|
SAE AMS 6437G |
Steel, Sheet, Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11)-UNS T20811 |
|
SAE AMS 6945 |
Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed-UNS R56400 |
|
SAE AMS 2476C |
Electrolytic Treatment for Magnesium Alloys Alkaline Type, Full Coat |
|
SAE AMS 3337D |
Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75 |
|
SAE AMS 4146E |
ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated and Naturally Aged |
|
SAE AMS 4625G |
Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper-UNS C51000 |
|
SAE AMS 4926L |
Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength-UNS R54520 |
|
SAE AMS 5353D |
Steel, Corrosion-Resistant, Investment Castings 16Cr - 1.8Ni - 0.08N As Cast-UNS J91651 |
|
SAE AMS 3892/1B |
Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus |
|
SAE AMS 4246D |
Aluminum Alloy, Welding Wire 7.0Si - 0.52Mg (357)-UNS A03570 |
|
SAE AMS 4427B |
Magnesium Alloy Castings, Sand 4.0Y - 2.3Nd - 0.7Zr (WE43B - T6) Solution and Precipitation Heat Treated-UNS M18432 |
|
SAE AMS 4983D |
Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged 180 ksi (1241 MPa) Tensile Strength |
|
SAE AMS 5505E |
Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 12Cr (SAE 51410 Modified) Ferrite Controlled, Annealed-UNS S41000 |
|
SAE AMS 5563C |
Steel, Corrosion Resistant, Seamless or Welded Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, ¼ Hard Temper-UNS S30400 |
|
SAE AMS 5682E |
(R) Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 78Ni - 20Cr |
|
SAE AMS 5782F |
Steel, Corrosion and Heat-Resistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted-UNS S63197 |
|
SAE AMS 7911B |
Aluminum Beryllium, Preforms Hot Isostatic Pressed 38Al - 62Be |
|
SAE AMS-QQ-A-250/10A |
Aluminum Alloy 5454, Plate and Sheet-UNS A95454 |
|
SAE AMS-QQ-P-35A |
Passivation Treatments for Corrosion-Resistant Steel |
|
SAE AMS-S-8949B |
Steel Bars, Plates, Sheets, Billets, and Reforging Stock Type D6AC |
|
SAE AMS 4245D |
Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (355)-UNS A03550 |
|
SAE AMS 4934E |
Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged |
|
SAE AMS 7882A |
Tungsten Carbide-Cobalt Chrome Powder Agglomerated and Sintered |
|
SAE AMS-T-81914/4 |
Tubing, Plastic, Extra Flexible, Convoluted, Fluorinated Ethylene Propylene, Close Convolution-Should Be Used Instead of MIL-T-81914/4, Which Was Cancelled on December 18, 1998 |
|
SAE AMS 2310F |
Qualification Sampling and Testing of Steels for Transverse Tensile Properties |
|
SAE AMS 2480G |
Phosphate Treatment Paint Base |
|
SAE AMS-S-7124A |
Sealing Compound, Polysulfide, Accelerator Required, for Aircraft Structures-FSC 8030; Should Be Used Instead of MIL-S-7124B, Which Was Cancelled on 27 September 1999 |
|
SAE AMS 3267/3A |
Sealing Compound, Low Adhesion, Corrosion Inhibiting 200 to 600 Poises (20 to 60 Pa.s), 2 Hour Application Time (A-2) |
|
SAE AMS 4017K |
Aluminum Alloy Sheet and Plate 2.5Mg - 0.25Cr (5052-H34) Strain- Hardened, Half-Hard, and Stabilized-UNS A95052 |
|
SAE AMS 4040M |
Aluminum Alloy, Alclad Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1 1/2 percent Alclad 2024-0) Annealed-UNS A82024 |
|
SAE AMS 4279B |
Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4 Flat Sheet) Solution Heat Treated, High Formability-UNS A82024 |
|
SAE AMS 4530G |
(R) Copper-Beryllium Alloy Sheet, Strip, and Plate 98Cu - 1.9Be Solution Heat Treated (TB00) |
|
SAE AMS 4634A |
Aluminum Bronze Bars, Rods, and Forgings 90.5Cu - 7.5Al - 1.9Si Stress Relieved-UNS C64200 |
|
SAE AMS 4950B |
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified Strength-UNS R56400 |
|
SAE AMS 5349D |
Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered-UNS J91161 |
|
SAE AMS 6910 |
Titanium Alloy Bars, Forgings and Forging Stock 8Al - 1Mo - 1V Duplex Annealed-UNS R54810 |
|
SAE AMS 7270K |
Rings, Sealings, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant 65 - 75 |
|
SAE AMS 3138/3B |
(R) Coating Material, Fluorocarbon (FKM) Elastomeric Rain-Erosion Resistant, Color Matched |
|
SAE AMS 4350M |
(R) Magnesium Alloy, Extrusions 6.5A1 - 0.95Zn (AZ61A-F) as Extruded-UNS M11610 |
|
SAE AMS 5044J |
Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper-UNS G10100 |
|
SAE AMS 5828G |
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al - 0.006B Vacuum Induction Melted, Solution Heat Treated-UNS N07001 |
|
SAE AMS 3200J |
Butadiene Acrylonitrile (NBR) Rubber Petroleum-Base Hydraulic Fluid Resistant 55 - 65 |
|
SAE AMS 3338F |
Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 75 - 85 |
|
SAE AMS 3374/2 |
Sealing Compound, Two-Part, Addition Cured Silicone (Type 2) Firewall Sealant |
|
SAE AMS 4544F |
Nickel-Copper Alloy, Corrosion Resistant, Sheet, Strip, and Plate, 67Ni - 30Cu Annealed-UNS N04400 |
|
SAE AMS 5587E |
Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated-UNS N06002 |
|
SAE AMS 5674E |
Steel, Corrosion and Heat Resistant, Wire 18Cr - 11.5Ni - 0.70Cb (SAE 30347) Solution Heat Treated-UNS S34700 |
|
SAE AMS 6921 |
Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated and Aged-UNS R58640 |
|
SAE AMS-P-46112 |
Plastic Sheet and Strip, Polyimide |
|
SAE AMS 4181C |
Aluminum Alloy, Welding Wire 7.0Si - 0.38Mg - 0.10Ti (4008 or 356)-UNS A94008 |
|
SAE AMS 4915J |
Titanium Alloy Sheet, Strip, and Plate 8Al - 1V - 1Mo Single Annealed-UNS R54810 |
|
SAE AMS 2460 |
Plating, Chromium |
|
SAE AMS-P-46144 |
Plastic Sheet, Polycardonate |
|
SAE AMS 3241H |
Chloroprene (CR) Rubber Weather Resistant 55 - 65 |
|
SAE AMS 4070L |
Aluminum Alloy, Drawn, Round Seamless Tubing 2.5Mg - 0.25Cr (5052-0) Annealed-UNS A95052 |
|
SAE AMS 4085C |
Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged-UNS A9747 |
|
SAE AMS 4161G |
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged |
|
SAE AMS 4452C |
Magnesium Alloy, Investment Castings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation Heat Treated-UNS M11914 |
|
SAE AMS 5611F |
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Consumable Electrode Melted-UNS S41001 |
|
SAE AMS 5925A |
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 15.5Cr - 1.8Mo - 0.20N (0.37 - 0.45C) Electroslag Remelted-UNS S42025 |
|
SAE AMS 2678 |
Furnace Brazing of Parts in a Vacuum Atmosphere |
|
SAE AMS 3269A |
(R) Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities High Strength, for Intermittent Use to 360 Degrees F (182 Degrees C) |
|
SAE AMS 4261E |
(R) Aluminum Alloy Castings, Investment 7.0Si - 0.32Mg (356.0-T51) Precipitation Heat Treated-UNS A03560 |
|
SAE AMS 4963B |
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified Strength-UNS R56400 |
|
SAE AMS 5020E |
Steel Bars, Forgings, and Tubing, Free-Cutting 1.5Mn - 0.25Pb (0.32 - 0.39C) (11L37) (Composition similar to UNS G11374) |
|
SAE AMS 5388H |
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW) As-Cast-UNS N10002 |
|
SAE AMS 5573L |
Steel, Corrosion and Heat-Resistant, Seamless Tubing 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat Treated-UNS S31600 |
|
SAE AMS 5858C |
Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Multiple Melted, 1800 Degrees F (982 Degrees C) Solution Heat Treated, Welding Grade Precipitation Hardenable-UNS S66286 |
|
SAE AMS 2546 |
Laser Peening |
|
SAE AMS 1380A |
Scale Conditioner, Alkaline Aircraft Turbine Engine Components |
|
SAE AMS 4740D |
Copper Powder 99.0 Cu, Minimum as Fabricated |
|
SAE AMS 6519B |
Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Double Vacuum Melted, Annealed |
|
SAE AMS 6520D |
Steel, Maraging, Sheet, Strip, and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Melted, Solution Heat Treated-UNS K92890; Reaffirmed Non-current February 2006 |
|
SAE AMS-C-19853 |
Carbon Removing Compound (for Use in Agitated Tank) |
|
SAE AMS 3199K |
Sponge, Chloroprene (CR) Rubber Firm |
|
SAE AMS 3628D |
Plastic Extrusions and Moldings, Polycarbonate General Purpose |
|
SAE AMS 4511A |
Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52(Co + Ni) - 0.28Si Solution and Precipitation Heat Treated (TF00)-UNS C82500 |
|
SAE AMS 4973E |
Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized-UNS R54810 |
|
SAE AMS 7274H |
Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Oil Resistant 65 - 75 |
|
SAE AMS 3224 |
Nitrile-Butadiene Rubber Fuel, Fire, and Ozone Resistant 65 - 75 |
|
SAE AMS 3892B |
Fibers, Carbon, Tow and Yarn for Structural Composites |
|
SAE AMS 4336A |
Aluminum Alloy, Extruded Rod, Bar, and Profiles (7055-T76511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged-UNS A97055 |
|
SAE AMS 5817F |
Steel, Corrosion and Heat-Resistant, Welding Wire 13Cr - 2.0Ni - 3.0W-UNS S41800 |
|
SAE AMS 6407H |
Steel, Bars, Forgings, and Tubing 1.2Cr - 2.0Ni - 0.45Mo (0.27 - 0.33C)-UNS K33020 |
|
SAE AMS 6456D |
Steel, Welding Wire 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4340 Mod) Vacuum Melted, Environment-Controlled Packaging |
|
SAE AMS 7906B |
Beryllium Bars, Rods, Tubing, and Shapes Standard Grade |
|
SAE AMS 1537B |
Cleaner, Alkaline Hot-Tank Type |
|
SAE AMS 3349C |
Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75 |
|
SAE AMS 5363E |
Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5Cr - 10.5Ni - 0.90 (Cb+Ta) Solution Heat Treated-UNS J92641; Reaffirmed Noncurrent January 2002 |
|
SAE AMS 5400B |
Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength-UNS J92110 |
|
SAE AMS 6439C |
Steel Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC) Consumable Electrode Vacuum Melted, Annealed-UNS K24728 |
|
SAE AMS 6920A |
Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated-UNS R58640 |
|
SAE AMS 7493L |
Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant Steels |
|
SAE AMS 2689A |
Fusion Welding Titanium and Titanium Alloys-Reaffirmed Noncurrent May 2005 |
|
SAE AMS 4046F |
Aluminum Alloy Sheet and Plate, Alclad One Side 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad One Side 7075; -T6 Sheet -T651 Plate) Solution and Precipitation Heat Treated-UNS A87075 |
|
SAE AMS 4179C |
Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated-UNS A97175 |
|
SAE AMS 4287A |
Aluminum Alloy, Extrusion 2.7 Cu - 1.8 Li - 0.7 Zn - 0.3 Mn - 0.3 Mg - 0.08 Zr (2099-T83) Solution Heat Treated, Stress Relieved by Stretching 1% to 4% and Aged-UNS A92099 |
|
SAE AMS 4344C |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Staightened,, and Overaged-UNS A97175 |
|
SAE AMS 5045H |
Steel, Sheet and Strip 0.25 Carbon, Maximum Hard Temper-UNS G10200 |
|
SAE AMS 5338E |
Steel, Investment Castings 0.95Cr - 0.20Mo (0.35 - 0.45C) (SAE 4140 Mod) Normalized or Normalized and Tempered-UNS J14046 |
|
SAE AMS 5412 |
Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion Resistant 13Cr - 8.0Ni - 2.2Mo - 1.1Al (195,000 psi (1344 MPa) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat Treated-UNS N13800 |
|
SAE AMS 5584A |
Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing 17Cr - 12Ni - 1.5Mo - 0.03C max Cold Drawn, 1/8 Hard Temper-UNS S31603 |
|
SAE AMS 5823E |
Steel, Corrosion and Heat Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V-UNS S41780 |
|
SAE AMS 5859D |
Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable-UNS S45000 |
|
SAE AMS-S-7916A |
Sealing Compound, Thread and Gasket, Fuel, Oil, and Water Resistant-FSC 8030 |
|
SAE AMS 10141A |
Tee - Bulb Section Extruded-FSC 9540 |
|
SAE AMS 2413E |
Plating, Silver-Rhodium |
|
SAE AMS 2451/9A |
Plating, Brush, Zinc-Nickel Low Hydrogen Embrittlement |
|
SAE AMS 3040C |
Magnetic Particles, Nonfluorescent Dry Method |
|
SAE AMS 4077F |
Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0) Annealed-UNS A82024 |
|
SAE AMS 5356B |
Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength-UNS J92110 |
|
SAE AMS 5399D |
Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated-UNS N07041 |
|
SAE AMS 5586G |
Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al - 0.006B - 0.08Zr Consumable Electrode Remelted or Vacuum Induction Melted, Annealed-UNS N07001 |
|
SAE AMS-QQ-A-250/28B |
Aluminum Alloy, 7011 Alclad 7178 Plate and Sheet-UNS A87178 |
|
SAE AMS 3201K |
Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 35 - 45 |
|
SAE AMS 3202L |
Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 55 - 65 |
|
SAE AMS 5530G |
Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant 58Ni - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat Treated |
|
SAE AMS 6277F |
Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted-UNS G86200 |
|
SAE AMS 6901 |
Titanium Alloy Bars, Forgings and Forging Stock 5Al - 2.5Sn, Extra Low Interstitial Annealed-UNS R54521 |
|
SAE AMS-QQ-A-200/14A |
Aluminum Alloy, Bar, Rod, Shapes, and Wire, Extruded, 7178-T76 Improved Exfoliation Resistance-Composition similar to UNS A97178 |
|
SAE AMS 2516D |
Polytetrafluoroethylene (PTFE) Resin Coating High Build, 370 Degrees - 400 Degrees C (698 Degrees - 752 Degrees F) Fusion |
|
SAE AMS 2628 |
Ultrasonic Immersion Inspection Titanium and Titanium Alloy Billet Premium Grade |
|
SAE AMS 3135E |
Coating Material, Silicone Resin 205 Degrees C (400 Degrees F) Cure |
|
SAE AMS 3204L |
Rubber, Synthetic Low-Temperature Resistant 25 - 35 |
|
SAE AMS 3279B |
Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 °F (171 °C) |
|
SAE AMS 3818A |
Braid, Flat, Polyester, Lacing and Tying Synthetic Rubber Coated, Low Outgassing |
|
SAE AMS 4296B |
Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated and Cold Worked-UNS A82524 |
|
SAE AMS 5547H |
Steel, Corrosion and Heat Resistant, Sheet and Strip 15.5 Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated-UNS S35500 |
|
SAE AMS 7264A |
RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75 |
|
SAE AMS 1626B |
Desmutter, Aluminum, Liquid |
|
SAE AMS 2221G |
Tolerances Copper and Copper Alloy Bars and Rods |
|
SAE AMS 2980/3A |
Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Fabric |
|
SAE AMS 3274G |
Acrylonitrile Butadiene (NBR) Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant |
|
SAE AMS 3331A |
Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 65 - 75 |
|
SAE AMS 3570E |
Foam, Flexible Polyurethane Open Cell, Medium Flexibility |
|
SAE AMS 4118K |
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated-UNS A92017 |
|
SAE AMS 5649G |
Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated-UNS J92200 |
|
SAE AMS-L-18331A |
Lead Alloy Pig |
|
SAE AMS 3316 |
Silicone Rubber, Fiberglass Fabric Reinforced |
|
SAE AMS 3332D |
Silicone Rubber Extreme Low-Temperature Resistant 15 - 30 |
|
SAE AMS 4004C |
Aluminum Alloy, Foil 2.5Mg - 0.25Cr (5052-H191) Strain Hardened (UNS A95052) |
|
SAE AMS 4730F |
Nickel-Copper Alloy Wire, Corrosion-Resistant 67Ni - 31Cu Annealed (400)-UNS N04400 |
|
SAE AMS 4909G |
Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial Annealed-UNS R54521 |
|
SAE AMS 4990 |
Titanium Alloy Sheet, Strip, and Plate 6Al-6V-2Sn Solution Heat Treated and Aged-UNS R56620 |
|
SAE AMS 5558G |
Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Thin Wall Solution Heat Treated-UNS S34700 |
|
SAE AMS-T-81914/2 |
Tubing, Plastic, Extra Flexible, Convoluted, Polytetrafluoroethylene, Close Convolution-FSC 9330; Should Be Used Instead of MIL-T-81914/2(AS), which Was Inactivated for New Design on 31 August 1999 |
|
SAE AMS 1431B |
(R) Compound, Solid Runway and Taxiway Deicing/Anti-Icing |
|
SAE AMS 3327C |
Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 70 - 80 |
|
SAE AMS 3901/1C |
(R) Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/22.5 Tensile Strength, 18 (124)/1010 Tensile Modulus 195 (215 d tex) Denier, 0.6% Finish |
|
SAE AMS 4169K |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated-UNS A97075 |
|
SAE AMS 4507H |
Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Half Hard (H02)-UNS C26000 |
|
SAE AMS 5115H |
Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered-FSC 9505; Reaffirmed Noncurrent November 2004 |
|
SAE AMS 5526J |
Steel Sheet, Strip, and Plate, Corrosion and Heat Resistant 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.42(Cb+Ta) - 0.22Ti Solution Heat Treated-UNS K63198 |
|
SAE AMS 5893B |
Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8(Cb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion-UNS N19909 |
|
SAE AMS 7445D |
Balls, Steel, Corrosion-Resistant 17Cr Annealed-UNS S44002, S44003, S44004 |
|
SAE AMS 3023 |
Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material |
|
SAE AMS 6466E |
Steel, Corrosion Resistant, Welding Wire 5.2Cr - 0.55Mo-UNS S50280 |
|
SAE AMS 4184F |
Filler Metal, Aluminum Brazing 10Si - 4.0Cu (4145) |
|
SAE AMS 4284G |
(R) Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated-UNS A03560 |
|
SAE AMS 4611H |
Brass, Naval, Bars and Rods 60.5Cu - 38.7Zn - 0.8Sn Half Hard (H02)-UNS C46400 |
|
SAE AMS 5718C |
Steel, Bars, Forgings, Tubing, and Rings, Corrosion-Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed-Composition similar to UNS S64152 |
|
SAE AMS 5839A |
Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al-UNS N06231 |
|
SAE AMS 7718F |
Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, and Forgings 50Ni - 50Fe-UNS K95000 |
|
SAE AMS-G-25667 |
Glass, Monolithic, Aircraft Glazing |
|
SAE AMS-I-7171 |
Insulation Blanket, Thermal-Acoustical-FSC 5640; Should Be Used Instead of MIL-I-7171D, Which Was Cancelled on 30 September 1999 |
|
SAE AMS-QQ-A-250/21B |
Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant-UNS A97178 |
|
SAE AMS 3002F |
Alcohol, Denatured Ethyl |
|
SAE AMS 3214K |
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistance 35 - 45 |
|
SAE AMS 4335 |
Forgings, Aluminum Alloys 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile Properties and Fracture Toughness |
|
SAE AMS 5686G |
Steel, Corrosion Resistant, Rivet Wire, 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated-UNS S30500 |
|
SAE AMS 5869C |
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated-UNS N06625 |
|
SAE AMS 6451C |
Steel, Spring Wire 1.4Si - 0.65Cr (0.51 - 0.59C) (SAE 9254) Oil Tempered-UNS G92540 |
|
SAE AMS-R-5001 |
Rubber Cellular Sheet, Molded and Hand-Built Shapes; Latex Foam-Should Be Used Instead of MIL-R-5001, Which Was Cancelled on December 18, 1998 |
|
SAE AMS 4189G |
Aluminum Alloy, Welding Wire 4.1 Si - 0.20Mg (4643) |
|
SAE AMS 4208B |
Aluminum Alloy Sheet 6.0Cu - 0.40Zr - (2004-F) As Rolled-UNS A92004 |
|
SAE AMS 5060H |
Steel, Bars, Forgings, and Tubing 0.13 - 0.18C (SAE 1015)-UNS G10150 |
|
SAE AMS 5075F |
Steel Tubing, Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved-UNS G10250 |
|
SAE AMS 5330D |
Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340 Modified) Annealed-J24060; Reaf. Noncur. SEP 2003 |
|
SAE AMS 5442 |
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 degrees F (968 degrees C) Solution and Precipitation Heat Treated-UNS N07818 |
|
SAE AMS 5886B |
Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 50Ni - 20Cr - 20Co - 5.8Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted 2100 Degrees F (1149 Degrees C) Solution Heat Treated-UNS N07263 |
|
SAE AMS 6373G |
Steel, Welded Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)-UNS G41300 |
|
SAE AMS 6527D |
Steel, Bars and Forgings 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged-UNS K92571 |
|
SAE AMS 7721C |
Lead Alloy Sheet and Extrusions 93Pb - 6.5Sb - 0.50Sn as Fabricated-UNS L53131 |
|
SAE AMS 3430C |
(R) Brazing Filler Metal, Paste, Copper Water Thinning |
|
SAE AMS 5396D |
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 65Ni - 28Mo - 5.5Fe - 0.40V (N-12MV) As-Cast-UNS N10001 |
|
SAE AMS 1527B |
Cleaner for Aircraft Exterior Surfaces, Water-Miscible, Foam-On, Pressure-Spraying |
|
SAE AMS 2231J |
Tolerances Carbon Steel Bars |
|
SAE AMS 4343D |
Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged-UNS A97149 |
|
SAE AMS 4700C |
Copper Wire, Bare High Purity-UNS C10100 |
|
SAE AMS 5582E |
Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable to 155 ksi (1069 MPa) Tensile Strength-UNS N07750 |
|
SAE AMS 6290H |
Steel, Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.11 - 0.17C) (SAE 4615)-UNS G46150 |
|
SAE AMS 6479B |
Steel, Bars, Forgings, and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) Special Aircraft-Quality Cleanliness |
|
SAE AMS 6935 |
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 6.0V - 2.0Sn Solution Heat Treated and Aged-UNS R56620 |
|
SAE AMS 7320E |
Rings, Sealing, Cast Leaded-Tin Bronze, 80Cu - 16Sn - 5Pb As Cast |
|
SAE AMS-A-8576 |
Adhesive, Acrylic Base, for Acrylic Plastic |
|
SAE AMS-QQ-A-200/10A |
Aluminum Alloy 6066, Bar, Rod, Shapes, Tube, and Wire, Extruded-UNS A96066 |
|
SAE AMS 2757B |
Gaseous Nitrocarburizing |
|
SAE AMS 3380D |
Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced |
|
SAE AMS 4248B |
Aluminum Alloy Hand Forgings and Rolled Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652) Solution Heat Treated, Stress Relief Compressed, and Precipitation Heat Treated-UNS A96061 |
|
SAE AMS 5366E |
Steel, Corrosion and Heat-Resistant, Investment Castings 25Cr - 20Ni (CK-20) As-Cast |
|
SAE AMS 5824E |
Steel, Corrosion-Resistant, Welding Wire 17Cr - 7.1Ni - 1.0Al-UNS S17780 |
|
SAE AMS 5872E |
Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 48Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted Solution Heat Treated-UNS N07263 |
|
SAE AMS 5920 |
Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Round Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened and Aged, Modified Strength-UNS R30159 |
|
SAE AMS 6907 |
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex Annealed-UNS R56260 |
|
SAE AMS 7254A |
Perfluoroether Elastomer |
|
SAE AMS 2775B |
Case Hardening of Titanium and Titanium Alloys |
|
SAE AMS 3278A |
Sealing and Coating Compound: Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose |
|
SAE AMS 4064F |
Aluminum Alloy, Clad Two Sides Sheet 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet) Annealed-UNS A83003 |
|
SAE AMS 4776G |
Nickel Alloy, Brazing Filler Metal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 to 1970 °F (977 to 1077 °C) Solidus-Liquidus Range-UNS N99610 |
|
SAE AMS 5030H |
Steel, Welding Wire 0.06 Carbon, Maximum-UNS K00606 |
|
SAE AMS 5609D |
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr - 0.12Cb (SAE 51410 Modified) Ferrite Controlled, Annealed-UNS S41040 |
|
SAE AMS 5692D |
Steel, Corrosion and Heat-Resistant, Welding Wire 19Cr - 12.5Ni - 2.5Mo-UNS S31680 |
|
SAE AMS 6320M |
Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)-UNS G87350 |
|
SAE AMS 1550B |
Cleaner, Water Base, Aircraft Interior Hard Surface Materials |
|
SAE AMS 3346F |
Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer |
|
SAE AMS 3669D |
Polytetrafluoroethylene Sheet, Molded Premium Grade, as Sintered |
|
SAE AMS 4160G |
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0) Annealed-UNS A96061 |
|
SAE AMS 4310D |
Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated-UNS A97075 |
|
SAE AMS 4939 |
Titanium Alloy Sheet, Strip, and Plate 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated-UNS R58640 |
|
SAE AMS 6926 |
Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged-UNS R58010 |
|
SAE AMS 2813F |
Packaging and Marking of Packages of Welding Wire Standard Method-FSC 3439 |
|
SAE AMS 3213L |
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85 |
|
SAE AMS 4131D |
Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged-UNS A97075 |
|
SAE AMS 4938 |
Forgings, Titanium Alloys Heat-Treated, Finished-Part Properties: Short-Transverse Tensile, Fracture Toughness, and Longitudinal Time-Dependent-Tension |
|
SAE AMS 4962A |
Titanium Alloy, Investment Castings 6Al - 4V Hot Isostatically Pressed |
|
SAE AMS 4970G |
Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat Treated-UNS R56740 |
|
SAE AMS 5385G |
(R) Cobalt Alloy, Corrosion and Heat Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo as Cast-UNS R30021 |
|
SAE AMS 5675F |
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 70Ni - 2.4Mn - 15.5Cr - 3.0Ti - 7.0Fe-Composition similar to UNS N07092 |
|
SAE AMS 5784E |
Steel, Corrosion and Heat-Resistant, Welding Wire 29Cr - 9.5Ni-UNS S64299 |
|
SAE AMS 7705E |
Nickel-Iron Magnetic Alloy, Bars and Forgings |
|
SAE AMS-QQ-A-250/20A |
Aluminum Alloy 5456, Plate and Sheet, for Sea Water Applications |
|
SAE AMS 1379A |
Compound, Alkaline Rust Remover Aircraft Turbine Engine Components |
|
SAE AMS 4362F |
Forgings, Magnesium Alloy 5.5Zn - 0.45Zr (ZK60A-T5) Precipitation Heat Treated-UNS M16600 |
|
SAE AMS 6358H |
Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)-UNS G87400 |
|
SAE AMS 6523F |
Steel, Sheet, Strip, and Plate 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum Consumable Electrode Melted, Annealed-UNS K91472 |
|
SAE AMS 1375B |
Remover, Paint, Epoxy and Polyurethane Paint Systems |
|
SAE AMS 4157D |
Aluminum Alloy Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated, Stress Relieved, and Overaged-UNS A97049 |
|
SAE AMS 4256B |
Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated-UNS A86951 |
|
SAE AMS 5592E |
Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15Si Solution Heat Treated-UNS N08330 |
|
SAE AMS-R-83412 |
Rubber, Ethylene-Propylene, Hydrazine Resistant |
|
SAE AMS 1535C |
Cleaner, Transparent Plastic |
|
SAE AMS 3092 |
Release Agent, for Use During Form-In-Place Gasket Preparation |
|
SAE AMS 3666D |
Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced |
|
SAE AMS 3670/3B |
Polyamide-Imide Bar, Rod, and Shapes 12% Graphite - 3% Polytetrafluoroethylene Filled |