|
SAE AMS 3826B |
(R) Cloth, Type |
|
SAE AMS 3845B |
Cloth, Type |
|
SAE AMS 3903A |
Cloth, Organic Fiber (Para-Aramid), High Modulus Epoxy Resin Impregnated |
|
SAE AMS 4000E |
Aluminum Sheet and Plate (1060-0) |
|
SAE AMS 4286E |
(R) Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.32Mg (356.0-T51) Precipitation Heat Treated-UNS A03560 |
|
SAE AMS 4520J |
Leaded Phosphor Bronze Strip 88.5Cu - 4.0Sn - 4.0Pb - 3.0Zn - 0.26P Cold Rolled, Half Hard (HO2)-UNS C54400 |
|
SAE AMS 4751C |
Tin - Lead Eutectic 63Sn - 37Pb-UNS L13630 |
|
SAE AMS 4768H |
Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 Degrees F (607 to 702 Degrees C) Solidus-Liquidus Range-UNS P07350 |
|
SAE AMS 5082G |
Steel Tubing, Seamless 0.31 - 0.38C (SAE 1035) Stress Relieved-UNS G10350 |
|
SAE AMS 5395C |
Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22Ni (2.5 - 3.0C) as Cast-UNS F43030 |
|
SAE AMS 5683F |
Alloy Welding Wire, Corrosion and Heat Resistant 75Ni - 15.5Cr - 8.0Fe-Reaffirmed Non-Current April 2006 |
|
SAE AMS-R-81828 |
Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant |
|
SAE AMS-S-85420 |
Sealing Compounds, Quick Repair, Low Temperature Curing Polysulfide, for Aircraft Structures-FSC 8030 |
|
SAE MAM 2355E |
Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloys Wrought Products, Except Forging Stock, and Rolled, Forged, or Flash Welded Rings |
|
SAE AMS 1631C |
Cleaner, Carpet Water Extraction Type |
|
SAE AMS 1659 |
Coating, Soil Barrier Semi-Permanent |
|
SAE AMS 2503F |
Black Finishing Low Baking Enamel |
|
SAE AMS 2521C |
Coating, Reflection-Reducing for Instrument Glasses |
|
SAE AMS 3057 |
Lubricant, Semi-Fluid, for Aircraft Gearboxes |
|
SAE AMS 3646C |
Sheet, Polychlorotrifluoroethylene (PCTFE), Molded, Unplasticized |
|
SAE AMS 3722A |
Paper Honeycomb 125 lb (55 kg) Paper |
|
SAE AMS 3778/5A |
Webbing, Woven, Nylon 900 Pounds Force (4003 N) |
|
SAE AMS 3798/3B |
Webbing, Low Modulus Aramid 3/4 (19) Wide, 600 (2669) Breaking Strength Herringbone Twill |
|
SAE AMS 3831A |
Cloth, Type |
|
SAE AMS 3892/2B |
Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile Modulus |
|
SAE AMS 4195C |
Aluminum Alloy Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat Sheet; 1-1/2% Alclad 2024-T861 Plate) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
|
SAE AMS 4270B |
Aluminum Alloy, Alclad Flat Sheet 4.1Cu - 1.4Mg - 0.45Mn (Alclad 2424-T3) Solution Heat Treated and Cold Worked-UNS A82424 |
|
SAE AMS 4331 |
Aluminum Alloy Extrusions 7.8Zn - 2.6Mg - 2.0Cu - 0.10Zr - (7068-T6511) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
|
SAE AMS 4674G |
Nickel - Copper Alloy, Corrosion Resistant Bars and Forgings 67Ni - 30Cu - 0.04S Free Machining-UNS N04405 |
|
SAE AMS 5031F |
Welding Electrodes, Covered, Steel 0.07 - 0.15C-Reaffirmed Noncurrent December 2004; UNS W06013; FSC 3439 |
|
SAE AMS 5223F |
Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10% Reduction-UNS N09902 |
|
SAE AMS 5375F |
Alloy Castings, Investment, Corrosion and Heat Resistant 65.5Co - 25Cr - 1.8Ni - 5.0W As Cast-UNS R30023 |
|
SAE AMS 5751E |
Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted-UNS N07500; Reaffirmed Noncurrent April 2006 |
|
SAE AMS 6331A |
Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo - (0.33 - 0.38C) (SAE 8735) Vacuum Melted, Environment Controlled Packaging-UNS G87350; Reaffirmed Noncurrent July 2001 |
|
SAE AMS 7726G |
Iron-Nickel-Cobalt Alloy, Wire 53Fe - 29Ni - 17Co Low Expansion, Glass Sealing, Annealed |
|
SAE AMS 7731C |
Gold Wire and Ribbon 99.97Au Annealed-UNS P00020 |
|
SAE AMS-C-29602 |
Cleaning Compounds, for Parts Washers and Spray Cabinets-FSC 6850 |
|
SAE AMS 1528C |
Cleaner for Aircraft Exterior Surfaces, Emulsion, Pressure-Spray Type |
|
SAE AMS 1531C |
Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids |
|
SAE AMS 1538A |
Deoxidizer, Acidic, for Magnesium Alloys |
|
SAE AMS 3194C |
Silicone Rubber Sponge Closed Cell, Firm, Extreme Low Temperature |
|
SAE AMS 3568A |
Sheet, Polyether Urethane (EU) Elastomer Foam Shock Absorbing |
|
SAE AMS 3695/3 |
Adhesive Film, Epoxy-Base, High Durability for 175 Degrees C (350 Degrees F) Service |
|
SAE AMS 3755/2A |
Powder, Fumed Silicon Dioxide Thickening Efficiency 95 |
|
SAE AMS 3778/3A |
Webbing, Woven, Nylon 400 Pounds Force (1779 N) |
|
SAE AMS 3798/13B |
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 7300 (32,472) Breaking Strength Twill, Resin Treated |
|
SAE AMS 3798/8B |
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 1200 (5338) Breaking Strength Herringbone Twill |
|
SAE AMS 3809 |
Tape, Adhesive, Pressure- Sensitive Double-Faced, Carpet Tie Down |
|
SAE AMS 3903/1A |
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 120, 175 (350) |
|
SAE AMS 4224B |
Aluminum Alloy Castings, Sand 4.0Cu - 2.1Ni - 2.0Mg - 0.30Cr - 0.30Mn - 0.13T - 0.13V (243.0) Stabilized-UNS A02430 |
|
SAE AMS 4233C |
Aluminum Alloy, Welding Wire 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201)-UNS A02010 |
|
SAE AMS 4304A |
Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15w (T8P) Solution Heat Treated, Stretched, and Precipitation Heat Treated |
|
SAE AMS 4555H |
Leaded Brass, Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (050)-UNS C33000 |
|
SAE AMS 4602D |
Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (HO4)-UNS C10200 |
|
SAE AMS 5552F |
Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 46Fe - 20.5Cr - 32Ni - 1.1Ti Annealed |
|
SAE AMS 5747D |
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable-UNS N07750 |
|
SAE AMS 5790C |
Steel, Corrosion and Heat Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb, High Ferrite Grade-UNS S34780 |
|
SAE AMS 5822D |
Steel, Corrosion and Heat-Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted-UNS S41780 |
|
SAE AMS 5877B |
Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05La - 0.20N Solution Heat Treated-UNS R30556 |
|
SAE AMS 6434F |
Steel, Sheet, Strip, and Plate 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C)(SAE 4335 Mod)-UNS K33517 |
|
SAE AMS 6476C |
Steel, Bars, Forgings, and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C)-UNS K19526 |
|
SAE AMS 7268C |
Rings, Sealing, Silicone Rubber Low Compression Set, Non-Oil Resistant 65 - 75 |
|
SAE AMS 7269B |
RINGS, SEALING, SILICONE (PVMQ) RUBBER Low Outgassing, Space and Vacuum Service 45 - 55 |
|
SAE AMS 7284/1 |
Rings, Sealing, Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel Resistant 65 - 75 Shore A |
|
SAE AMS 7904C |
Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade |
|
SAE AMS 7913B |
Aluminum-Beryllium Alloy, Sheet and Plate 38Al - 62Be |
|
SAE AMS 3004F |
Alcohol, Methyl |
|
SAE AMS 3165E |
Solvent, Petroleum Aromatic |
|
SAE AMS 3217/5B |
Test Slabs, Fluorosilicone (FVMQ) 55 - 65 |
|
SAE AMS 3272A |
Cloth, Nylon, Polyurethane Coated Thermally, Radio Frequency, or Ultrasonically Sealable |
|
SAE AMS 3334D |
Silicone Rubber Extreme Low-Temperature Resistant 35 - 45 |
|
SAE AMS 3571/4B |
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer |
|
SAE AMS 3579D |
Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio |
|
SAE AMS 3678/3 |
Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
|
SAE AMS 3693C |
Adhesive, Modified Epoxy Moderate Heat Resistant, 120 Degrees C (250 Degrees F) Curing, Film Type |
|
SAE AMS 3753A |
Microspheres, Carbon Hollow |
|
SAE AMS 3782/1A |
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.25 Ounce per Linear Yard (9.6 g/Linear m) |
|
SAE AMS 3798/4B |
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 5500 (24,465) Breaking Strength Double Plain Weave with Binder |
|
SAE AMS 3813/2A |
Rope, Aramid Fiber, Jacketed Parallel Strand, Extruded Jacket |
|
SAE AMS 3898B |
Interleaf Carrier Material, Composite Tape or Broadgoods Paper, 0.004 Inch (0.10 mm), Perforated |
|
SAE AMS 3906/6B |
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-36 - 95 (203) |
|
SAE AMS 4062J |
Aluminum Alloy, Drawn Seamless Round Tubing (1100-H14) Strain Hardened |
|
SAE AMS 4194C |
Aluminum Alloy Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T361 Flat Sheet; 1-1/2% Alclad 2024-T361 Plate) Solution Heat Treated and Cold Worked |
|
SAE AMS 4258A |
Laminated Sheet, Aluminum Alloy, Aramid Fiber Reinforced 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad, One Side 7475- T761) 5 or 7 Ply |
|
SAE AMS 4274A |
Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-0) Annealed, Fine Grain-UNS A82024 |
|
SAE AMS 4276A |
Aluminum Alloy, Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-0) Annealed, Fine Grained-UNS A92024 |
|
SAE AMS 4302B |
Aluminum Alloy, Laminated Sheet, Aramid Fiber Reinforced 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) 3, 5, 7, or 9 Ply |
|
SAE AMS 4574E |
Nickel-Copper Alloy, Corrosion Resistant, Tubing, Seamless 67Ni - 31Cu Annealed-UNS N04400 |
|
SAE AMS 5549G |
Steel, Corrosion and Heat Resistant, Plate 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated-UNS S35500 |
|
SAE AMS 5579D |
Steel, Corrosion and Heat Resistant, Tubing Welded 19.5Cr - 9.5Ni - 1.4Mo -1.4W - 0.42(Cb + Ta) - 0.22Ti Thin Wall-UNS S63198 |
|
SAE AMS 5624E |
Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished-UNS K91505 * Reaffirmed Non-Current April 2006 |
|
SAE AMS 5779D |
Alloy Welding Electrodes, Covered, Corrosion and Heat Resistant 75Ni - 15Cr - 1.5 (Cb+Ta) - 1.9Ti - 0.55Al - 5.5Fe-UNS N07750; Reaffirmed Noncurrent January 2002 |
|
SAE AMS 6430G |
Steel, Bars, Forgings, Tubing, and Rings 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 Modified)-UNS K33517 |
|
SAE AMS 7284A |
Rings, Sealing, Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel-Resistant-Reaffirmed Noncurrent April 2001 |
|
SAE AMS 7713B |
Iron, Electrical, Bar and Strip Cold Finished, Annealed |
|
SAE AMS-S-7108A |
Steel, Alloy (Manganese-Silicon-Nickel), Bars and Forging Stock (Aircraft Quality) |
|
SAE MAM 2223D |
Tolerances, Metric Copper and Copper Alloy Seamless Tubing |
|
SAE AMS 1450A |
Disinfectant (Insecticide), Aircraft |
|
SAE AMS 2535A |
Coating, Vapor Deposited Poly-Monochloro-Para-Xylylene for Microcircuits |
|
SAE AMS 3072E |
Compound, Corrosion Preventive Aircraft Engine |
|
SAE AMS 3101 |
Adhesion Promoter for Polysulfide Sealants, Non-Crazing of Acrylic and Polycarbonate |
|
SAE AMS 3571/9B |
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer |
|
SAE AMS 3684B |
Resin, Polyimide, Sealing High-Temperature Resistant, 315 Degrees C (600 Degrees F) Unfilled |
|
SAE AMS 3709C |
Syntactic Foam Tiles |
|
SAE AMS 3782A |
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus |
|
SAE AMS 3793/1A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1/2 Inch (12.5mm), 0.06 to 0.56 Ounces per Yard (1.9 to 17.4 g/m) |
|
SAE AMS 3798/11B |
Webbing, Low Modulus Aramid 1-3/4 (44) Wide, 10,000 (44,482) Breaking Strength Herringbone Twill |
|
SAE AMS 3798/12B |
Webbing, Low Modulus Aramid 1 (25) Wide, 9000 (40,034) Breaking Strength Special Weave |
|
SAE AMS 3798/9B |
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 6500 (28,913) Breaking Strength Herringbone Twill Resin Treated |
|
SAE AMS 3867B |
Boron Filament Tape, Epoxy-Resin-Impregnated |
|
SAE AMS 3892/5B |
Tow or Yarn, Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength, 75 (517) Tensile Modulus |
|
SAE AMS 3898/3B |
Interleaf Carrier Material, Composite Tape Polyethylene Coated Paper, Unperforated 0.0035 inch (0.089 mm) |
|
SAE AMS 3901/5C |
(R) Roving, Organic Fiber (Para-Aramid), High Modulus OR 450 (3103)/22.5 Tensile Strength, 17.5 (121)/865 Tensile Modulus 7100 Denier, (7900 d tex), 0.6% Finish |
|
SAE AMS 3903/8A |
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 328, 80 (180) |
|
SAE AMS 3906/5B |
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-36 - 150 (302) |
|
SAE AMS 4933D |
Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized-UNS R54810 |
|
SAE AMS 5328D |
Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.28 - 0.36C) (SAE 4330 Modified) Annealed-J23260; Reaf. Noncur. SEP 2003 |
|
SAE AMS 5775E |
Welding Electrodes, Covered, Corrosion and Heat-Resistant Steel 16.5Cr - 4.5Ni - 2.9Mo - 0.10N-UNS W35010 |
|
SAE AMS 5808C |
Steel, Corrosion and Heat Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element Controlled |
|
SAE AMS 6330G |
Steel Bars, Forgings, and Tubing 0.65Cr - 1.25Ni (0.33 - 0.38C) |
|
SAE AMS 6424E |
Steel Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C)-UNS K22950 |
|
SAE AMS 7728H |
Iron-Nickel-Cobalt Alloy, Sheet, Strip, and Plate 53Fe - 29Ni - 17Co Low Expansion Glass Sealing, Annealed-UNS K94610 |
|
SAE AMS-P-21922 |
Plastic Rods and Tubes, Polyethylene |
|
SAE AMS-QQ-W-428/2A |
Wire, Steel, High Carbon, Round, Type III |
|
SAE MAM 2301C |
Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement |
|
SAE AMS 3054B |
Oil, Lubricating, Low Temperature for -55 Degrees C (-67 Degrees F) Service |
|
SAE AMS 3364C |
Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Short Application Life, Durometer 35 - 55 |
|
SAE AMS 3373/1A |
Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure |
|
SAE AMS 3568/1A |
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density |
|
SAE AMS 3568/2A |
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic Foot (240 kg/m3) Density |
|
SAE AMS 3571/2B |
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer |
|
SAE AMS 3639F |
Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio |
|
SAE AMS 3694A |
Aerodynamic Smoothing Compound, Flexible -55 Degrees to +130 Degrees C (-65 Degrees to +270 Degrees F)-REAF Non-current Feb 2004 |
|
SAE AMS 3695/4 |
Adhesive Film, Epoxy-Base, High Durability for 215 Degrees C (420 Degrees F) Service |
|
SAE AMS 3698B |
Adhesive Film, Hot-Melt, Addition-Type Polyimide for Foam Sandwich Structure, -55 to +230 Degrees C (-65 to +450 Degrees F) |
|
SAE AMS 3778/4A |
Webbing, Woven, Nylon 2600 Pounds Force (11,565 N) |
|
SAE AMS 3793/4A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1 Inch (25mm), 0.08 to 1.65 Ounces per Yard (2.5 to 51.2 g/m) |
|
SAE AMS 3793A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus |
|
SAE AMS 3798/5B |
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 3600 (16,014) Breaking Strength Herringbone Twill, Resin Treated |
|
SAE AMS 3798/6B |
Webbing, Low Modulus Aramid 3-1/32 (77) Wide, 9000 (40,034) Breaking Strength Double Plain Weave with Binder |
|
SAE AMS 3798/7B |
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 8700 (38,700) Breaking Strength Double Plain Weave with Binder |
|
SAE AMS 3801B |
Cloth, Parachute - Meta-Aramid, Low Modulus |
|
SAE AMS 3865C |
Filaments, Boron Tungsten Substrate, Continuous |
|
SAE AMS 3892/10A |
Tow, Carbon Fiber for Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus |
|
SAE AMS 3894/10A |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 210,000 (1448) Tensile, 20,000,000 (138) Modulus, 175 (347) |
|
SAE AMS 3898/2B |
Interleaf Carrier Material, Composite Tape Polyethylene Film, 0.0018 inch (0.046 mm), Unperforated |
|
SAE AMS 3901/8B |
(R) Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/22.6 Tensile Strength, 18 (124)/1005 Tensile Modulus 195 Denier (215 d tex), 1.2% Finish |
|
SAE AMS 3903/3A |
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 281, 175 (350) |
|
SAE AMS 3903/5A |
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 120, 80 (180) |
|
SAE AMS 3906/1B |
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-36 - 120 (248) |
|
SAE AMS 3906/7B |
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-III-33 - 95 (203) |
|
SAE AMS 4338A |
Aluminum Alloy, Extrusions 4.0Cu - 1.3Mg - 0.60Mn (2026-T3511) Solution Heat Treated and Stress Relieved by Stretching-UNS A92026 |
|
SAE AMS 5034A |
Steel, Welding Wire 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)-UNS G41300 |
|
SAE AMS 5585F |
Alloy, Corrosion and Heat Resistant, Welded Tubing 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb - 0.15N Solution Heat Treated-UNS R30155 |
|
SAE AMS 5792B |
Powder, Plasma Spray 50 (88WC - 12Co) + 35 (70Ni - 16.5Cr - 4Fe - 4Si - 3.8B) + 15 (80Ni - 20A1) Three-Component Mixture |
|
SAE AMS 6357J |
Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)-Composition Similar to UNS G87350 |
|
SAE AMS 6438F |
Steel, Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.45 - 0.50C) Consumable Electrode Vacuum Melted-UNS K24728 |
|
SAE AMS 6460F |
Wire, Steel Welding 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C)-UNS K11365 |
|
SAE AMS 6544C |
Maraging Steel, Plate 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum Melted, Solution Heat Treated-UNS K91971 |
|
SAE MAM 2243D |
Tolerances, Metric Corrosion and Heat Resistant Steel Tubing |
|
SAE AMS 1377 |
Remover, Paint Epoxy and Polyurethane Paint System Non-Chlorinated Solvent |
|
SAE AMS 1529C |
Cleaner for Aircraft Exterior Surfaces, Emulsion, Foam-On, Pressure-Spray Type |
|
SAE AMS 3077 |
Compound, Corrosion Preventive Soft Film, Thixotropic, Cold Application |
|
SAE AMS 3220F |
Rubber, Synthetic General Purpose, Fluid Resistant 55 - 65 |
|
SAE AMS 3648B |
Tubing, Polychlorotrifluoroethylene (PCTFE) Unplasticized |
|
SAE AMS 3697B |
Aerodynamic Fairing Compound -55 Degrees to +150 Degrees C (-65 Degrees to +300 Degrees F)-REAF Non-current Feb 2004 |
|
SAE AMS 3699A |
Resin System, Epoxy, Carbon Microballoon Filled 135 Degrees C (275 Degrees F) Cure |
|
SAE AMS 3787/4A |
Thread, Para-Aramid Intermediate Modulus 3350 Yards per Pound (6753 m/kg), 50 Pounds Force (222 N) Breaking Strength |
|
SAE AMS 3787/8A |
Thread, Para-Aramid Intermediate Modulus 500 Yards per Pound (1008 m/kg), 225 Pounds Force (1001 N) Breaking Strength |
|
SAE AMS 3798/15B |
Webbing, Low Modulus Aramid 1 (25) Wide, 2500 (11,121) Breaking Strength Herringbone Twill |
|
SAE AMS 3799/1B |
Webbing, Tubular, Low Modulus Aramid 9/16 (14) Wide, 1400 (6228) Breaking Strength |
|
SAE AMS 3799/2B |
Webbing, Tubular, Low Modulus Aramid 3/4 (19) Wide, 2300 (10,231) Breaking Strength |
|
SAE AMS 3799/4B |
Webbing, Tubular, Low Modulus Aramid 3-3/16 (81) Wide, 2250 (10,008) Breaking Strength |
|
SAE AMS 3801/1A |
Cloth, Parachute, Meta-Aramid, Low Modulus 4.7(159) Weight, Twill |
|
SAE AMS 3834A |
Cloth, Type |
|
SAE AMS 3903/7A |
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 281, 80 (180) |
|
SAE AMS 4273B |
Aluminum Alloy, Sheet and Plate (2424-T3 Flat Sheet and Plate) Solution Heat Treated and Cold Worked-UNS A92424 |
|
SAE AMS 4382D |
Magnesium Alloy, Plate, Extra Flat 3.0Al – 1.0Zn – 0.20Mn (AZ31B-0) Annealed-UNS M11311 |
|
SAE AMS 4614H |
Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)-UNS C37700 |
|
SAE AMS 5874C |
Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N Solution Heat Treated-UNS R30556 |
|
SAE AMS 6312G |
Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4640)-UNS K22440 |
|
SAE AMS 6426E |
Steel Bars, Forgings, and Tubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C) Consumable Electrode Vacuum Melted-UNS K18597; Reaffirmed Non-current February 2006 |
|
SAE AMS 6465C |
(R) Wire, Steel Welding 2.0Cr - 10Ni - 8.0Co - 1.0Mo - 0.02Al - 0.06V (0.10 - 0.14C) Vacuum Melted, Environment Controlled Packaging-UNS K91971 |
|
SAE AMS 6468D |
Steel, Welding Wire 1.0Cr - 10Ni - 3.8Co - 0.45Mo - 0.08V (0.14 - 0.17C) Vacuum Melted, Environment Controlled Packaging-UNS K91461 |
|
SAE AMS-G-952A |
Guns, Spray, Oil and Solvent |
|
SAE AMS-P-38336 |
Primer Coating, Inorganic, Zinc Dust Pigmented, Self-Curing, for Steel Surfaces |
|
SAE MAM 2222D |
Tolerances, Metric Copper and Copper Alloy Sheet, Strip, and Plate |
|
SAE MAM 2241E |
Tolerances, Metric Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire |
|
SAE MAM 2771A |
Heat Treatment of Aluminum Alloy Castings |
|
SAE AMS 1320A |
Remover, Decal Adhesive |
|
SAE AMS 1451B |
Disinfectant, Aircraft for Use in Cargo Compartments |
|
SAE AMS 1525D |
CLEANER FOR AIRCRAFT EXTERIOR METALLIC SURFACES WIPE SOLVENT, COLD OPERATIONS |
|
SAE AMS 1551 |
Cleaner, Turbine Engine Gas Path Aqueous Type |
|
SAE AMS 3056B |
Lubricant, Instrument Bearing, Petroleum Base Viscosity 35 |
|
SAE AMS 3075F |
Compound, Corrosion-Preventive Hard Film, Hot Application |
|
SAE AMS 3109 |
Primer, Adhesive, Electrodeposited -55 to +82 °C (-67 ° to +180 °F) |
|
SAE AMS 3371 |
Silicone Resin, Elastomeric, Opaque Room Temperature Cure |
|
SAE AMS 3386D |
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber, Textile Reinforced, Chloroprene Covered, Collapsing |
|
SAE AMS 3500F |
Leather, Chrome-Vegetable Retained, Cattle Hide Fuel and Hot Oil Resistant |
|
SAE AMS 3529A |
Plastic Sheet and Film, Vinyl Copolymers Unplasticized |
|
SAE AMS 3615E |
Plastic Tubing Cotton Fabric Reinforced Phenol-Formaldehyde |
|
SAE AMS 3696B |
Aerodynamic Fairing Compound -55 Degrees to +85 Degrees C (-65 Degrees to +185 Degrees F)-REAF Non-current Feb 2004 |
|
SAE AMS 3782/4A |
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.50 Ounce per Linear Yard (20 g/Linear m) |
|
SAE AMS 3787/7A |
Thread, Para-Aramid Intermediate Modulus 850 Yards per Pound (1714 m/kg), 175 Pounds Force (778 N) Breaking Strength |
|
SAE AMS 3797/3B |
Webbing, Nylon, Integral Locking Slots 1 (25) Wide, 3000 (13,345) Breaking Strength |
|
SAE AMS 3797/5B |
Webbing, Nylon, Integral Locking Slots 1 (25) Wide, 5000 (22,241) Breaking Strength |
|
SAE AMS 3797B |
Webbing, Nylon, Integral Locking Slots |
|
SAE AMS 3799/3B |
Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17,793) Breaking Strength |
|
SAE AMS 3799B |
Webbing, Tubular, Low-Modulus Aramid-54 |
|
SAE AMS 3807B |
Tape, Aluminum Foil, Sound and Vibration Damping Pressure Sensitive Adhesive |
|
SAE AMS 3823D |
Cloth, Glass Style 7781, Chrome-Silane Finish |
|
SAE AMS 3828C |
Glass Roving, Epoxy Resin Preimpregnated Type E Glass |
|
SAE AMS 3867/3B |
Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E374 (Type B0.203-E190) |
|
SAE AMS 3867/4A |
Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82) |
|
SAE AMS 3890A |
Graphite Yarn, Non-Structural 5 Ply Yarn, 720 Filaments |
|
SAE AMS 3892/11A |
Tow, Carbon Fiber for Structural Composites 450 (3103) Tensile Strength, 32 (221) Tensile Modulus |
|
SAE AMS 3894/18 |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 355,000 (2448) Tensile, 22,000,000 (152) Modulus, 130 (266) |
|
SAE AMS 3894/5B |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 80 (176) |
|
SAE AMS 3899/1B |
Carbon Fiber Tape and Sheet Polysulfone Resin Impregnated C PS 172 (1170) Tensile, 16 (110) Modulus, 120 (248) |
|
SAE AMS 3903/4A |
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 328, 175 (350) |
|
SAE AMS 3906/2B |
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-III-36 - 120 (248) |
|
SAE AMS 3906/3B |
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-26 - 150 (302) |
|
SAE AMS 4402 |
Aluminum Alloy, Extruded Profiles (2024-T432) 4.4Cu - 1.5Mg - 0.6Mn Annealed, Stretch Formed, Solution Heat Treated and Stress Relieved by Stretching-UNS A92027 |
|
SAE AMS 4407 |
Aluminum Alloy, Plate (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg Solution Heat Treated, Stress Relieved, and Overaged-UNS A97056 |
|
SAE AMS 4417A |
Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21 - T6) Solution and Precipitation Heat Treated-Composition similar UNS MI8330 |
|
SAE AMS 4443F |
Magnesium Alloy, Sand Castings 4.5Zn - 0.75Zr (ZK51A-T5) Precipitation Heat Treated-UNS M16510 |
|
SAE AMS 4444D |
Magnesium Alloy Castings, Sand 6.0Zn - 0.80Zr (ZK61A-T5) Precipitation Heat Treated |
|
SAE AMS 4483D |
Magnesium Alloy Castings, Permanent Mold 10Al (AM100A-T6) Solution and Precipitation Heat Treated-UNS M10100 |
|
SAE AMS 4633A |
Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50)-UNS C64200 |
|
SAE AMS 4953E |
Titanium Alloy Welding Wire 5Al - 2.5Sn-UNS R54520 |
|
SAE AMS 4993C |
Titanium Alloy, Blended Powder Compacts, Sintered 6A1 - 4V-UNS R56400 |
|
SAE AMS 5393G |
Alloy Iron Castings, Sand, Moderate Corrosion and Heat Resistant 2.0Cr-20Ni (2.4-2.8C) Stress Relieved-UNS F47005 |
|
SAE AMS 5406B |
Alloy Castings, Investment, Corrosion and Heat Resistant 63Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.03Zr - 1.2Hf Vacuum Melted, Vacuum Cast as Cast |
|
SAE AMS 5408B |
Alloy Castings, Centrifugal, Corrosion and Heat Resistant 64Ni - 16Cr - 15Mo - 0.30Al - 0.05La Solution Heat Treated |
|
SAE AMS 5871D |
Alloy, Corrosion and Heat Resistant, Sheet, Strip and Plate 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat Treated-UNS N08800 |
|
SAE AMS 5931A |
Steel, Bars, Wire, Forgings, Extrusions, Tubing, and Rings Wear, Galling, and Corrosion-Resistant 5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14N Solution Heat Treated-Composition similar to UNS S20161 |
|
SAE AMS 5961A |
Nickel Alloy, Corrosion and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Cold Reduced, Spring Temper-UNS N06600 |
|
SAE AMS 6387 |
Steel, Carbon, Laminated Sheet, Surface Bonded |
|
SAE AMS 6413K |
Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4337)-UNS G43370 |
|
SAE AMS 6422H |
Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40)-UNS K11940 |
|
SAE AMS 7910B |
Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered |
|
SAE AMS 7918A |
Beryllium Aluminum Alloy Investment Castings 64.9Be - 30Al - 3Ag - 1Co - 0.75Ge As Cast |
|
SAE AMS-C-5541A |
Chemical Conversion Coatings on Aluminum and Aluminum Alloys-AREA MFFP |
|
SAE AMS-R-81835 |
Remover, Organic Coating, Hot Tank Type |
|
SAE AMS 1478A |
Deodorizer, Aircraft, Deactant-Type Aerosol Packaged |
|
SAE AMS 3006F |
Alcohol-Water Mixtures |
|
SAE AMS 3564E |
Vulcanized Fiber Sheet |
|
SAE AMS 3572B |
Resin Polyurethane, Foam- in-Place, Rigid |
|
SAE AMS 3676C |
Insulation, Sound and Thermal Resin-Bonded Glass Fiber, Medium Filament |
|
SAE AMS 3728A |
Epoxy Cresol Novolac Resin Low Molecular Weight |
|
SAE AMS 3731/6B |
Potting Compound, Epoxy Bisphenol A-Type Syntactic Foam, Heat Cure |
|
SAE AMS 3787/1A |
Thread, Para-Aramid Intermediate Modulus 10,000 Yards per Pound (20,159 m/kg), 16 Pounds Force (71 N) Breaking Strength |
|
SAE AMS 3787/3A |
Thread, Para-Aramid Intermediate Modulus 5000 Yards per Pound (10.080 m/kg), 35 Pounds Force (156 N) Breaking Strength |
|
SAE AMS 3787/6A |
Thread, Para-Aramid Intermediate Modulus 950 Yards per Pound (1915 m/kg), 150 Pounds Force (667 N) Breaking Strength |
|
SAE AMS 3801/2A |
Cloth, Parachute, Meta-Aramid, Low Modulus 6.5(220) Weight, Special Weave |
|
SAE AMS 3867/2B |
Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E374 (Type B0.142-E190) |
|
SAE AMS 3867/5A |
Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E180 (Type B0.142-E82) |
|
SAE AMS 3892/3B |
Tow or Yarn, Carbon Fibers for Structural Composites GF 400 (2758) Tensile Strength, 40 (276) Tensile Modulus |
|
SAE AMS 3892/9B |
Tow, Carbon Fiber for Structural Composites 500 (3447) Tensile Strength, 32 (221) Tensile Modulus |
|
SAE AMS 3894/9B |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 175 (347) |
|
SAE AMS 3901/12B |
(R) Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/21.1 Tensile Strength, 16.5 (114)/900 Tensile Modulus 2160 (2400 d tex) Denier, 1.2% Finish |
|
SAE AMS 3904/9A |
(R) Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 3000 Denier (3300 Dtex), 0.9% Finish |
|
SAE AMS 3940H |
Fiberboard, Hard-Pressed, Structural |
|
SAE AMS 4327 |
Aluminum Alloy, Plate (2098-O) 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.11Zr Annealed-UNS A92098 |
|
SAE AMS 4404 |
Aluminum Alloy, Extruded Profiles (6056-T4511) 1.0Si - 0.90Mg - 0.80Cu - 0.60Mn - 0.40Zn Solution Heat Treated and Stress-Relieved by Stretching-UNS A96056 |
|
SAE AMS 4408 |
Aluminum Alloy, Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged-UNS A97140 |
|
SAE AMS 5403B |
Alloy Castings, Investment, Corrosion and Heat Resistant 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vacuum Melted, Vacuum Cast |
|
SAE AMS 5404B |
Alloy Castings, Investment, Corrosion and Heat Resistant 59Ni - 12.6Cr - 9.0Co - 1.9Mo - 4.2W - 4.0Ti - 4.2Ta - 3.4Al - 0.015B - 0.10Zr - 0.90Hf Vacuum Melted, Vacuum Cast Solution and Precipitation Heat Treated |
|
SAE AMS 5791B |
Cobalt Alloy, Powder, Plasma Spray 56.5Co - 25.5Cr - 10.5Ni - 7.5W |
|
SAE AMS 5818A |
Steel, Corrosion and Heat Resistant, Welding Wire 9.0Mn - 20Cr - 6.2Ni - 0.20N |
|
SAE AMS 6282J |
Steel Tubing, Mechanical 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)-UNS G87350 |
|
SAE AMS 7258B |
Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant, Low Shrinkage 65 - 75 |
|
SAE AMS 7311G |
Piston Rings, Centrifugally-Cast Alloyed Iron 0.50Mo - 0.50Cu |
|
SAE AMS 7312G |
Piston Rings, Centrifugally-Cast Iron-Reaffirmed Non-current February 2006 |
|
SAE AMS 7732C |
Steel Wire, Copper Clad, Round 99Fe - 0.32Mn Annealed |
|
SAE MAM 2253B |
Tolerances, Metric Carbon and Alloy Steel Tubing |
|
SAE AMS 1539 |
Cleaning Compound, Terpene Circuit Board Cleaner |
|
SAE AMS 3571/3B |
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer |
|
SAE AMS 3779A |
Tape, Adhesive, Pressure-Sensitive Thermal Radiation Resistant |
|
SAE AMS 3782/2A |
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.30 Ounce per Linear Yard (12 g/Linear m) |
|
SAE AMS 3782/3A |
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.35 Ounce Per Linear Yard (14 g/Linear m) |
|
SAE AMS 3797/12B |
Webbing, Nylon, Integral Locking Slots 1-1/8 (29) Wide, 12,000 (53,379) Breaking Strength |
|
SAE AMS 3801/4A |
Cloth, Parachute, Meta-Aramid, Low Modulus 7.0(237) Weight, Plain Weave |
|
SAE AMS 3867/1B |
Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E374 (Type B0.102-E191) |
|
SAE AMS 3892/4B |
Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 75 (517) Tensile ModuluS |
|
SAE AMS 3892/6A |
Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus |
|
SAE AMS 3894/3B |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 19,000,000 (131) Modulus, 80 (176) |
|
SAE AMS 3894/8B |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 80 (176) |
|
SAE AMS 3903/6A |
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 181, 80 (180) |
|
SAE AMS 3906/4B |
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-III-26 - 150 (302) |
|
SAE AMS 4309A |
ALUMINUM ALLOY EXTRUSIONS 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened-UNS A98009 |
|
SAE AMS 4317 |
Aluminum Alloy, Extruded Bar, Rod, and Shapes 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075-T76(51X) Solution Heat Treated and Overaged-UNS R97075 |
|
SAE AMS 4325 |
Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511) 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr Solution Heat Treated, Stress-Relieved, Straightened and Overaged-UNS A97150 |
|
SAE AMS 4558G |
Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58) |
|
SAE AMS 4712F |
Copper Alloy, Wire 65Cu - 35Zn Annealed (061) |
|
SAE AMS 4731C |
Nickel-Copper Alloy Wire and Ribbon, Corrosion Resistant, 67Ni - 31Cu, Annealed-UNS N04400 |
|
SAE AMS 4892C |
Alloy Castings, Corrosion and Heat Resistant 66Ni - 29Cu - 4.0Si as Cast-UNS N04019 |
|
SAE AMS 5814C |
Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted-UNS R30918 |
|
SAE AMS 6328L |
Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.48 to 0.53C) (SAE 8750)-UNS K13550 |
|
SAE AMS 6375C |
Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, Environment Controlled Packaging-UNS G86200 |