|
SAE AMS 6477A |
Steel, Bars, Forgings, and Tubing 0.80Cr (0.90 - 1.03C) for Bearing Applications |
|
SAE AMS-H-81829 |
Heat Transfer Fluid, Fluorochemical-FSC 6850; Should Be Used Instead of MIL-H-81829, Which Was on 21 September 1999 |
|
SAE AMS-P-29609 |
Polyimide Retainer Material, Porous Non-Metallic-Replaces MIL-P-29609 |
|
SAE AMS 1775B |
Fabric, Nylon Upholstery Fire Retardant |
|
SAE AMS 2369B |
Quality Assurance Sampling Carbon and Low-Alloy Steel Castings-Reaffirmed Non-current February 2006 |
|
SAE AMS 2606E |
Pressure Testing 70 psi |
|
SAE AMS 2759/12A |
Gaseous Nitrocarburizing, Automatically Controlled by Potentials |
|
SAE AMS 3053 |
Grease, Water Resistant Polyalphaolefin Base |
|
SAE AMS 3079B |
Compound, Corrosion-Preventive Soft Film, Hot Application |
|
SAE AMS 3128G |
Aluminum Pigment Paste |
|
SAE AMS 3156D |
Oil, Fluorescent Penetrant Water Washable |
|
SAE AMS 3244G |
Chloroprene (CR) Rubber Flame Resistant 65 - 75 |
|
SAE AMS 3372A |
Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure |
|
SAE AMS 3388D |
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Single Wire Braid Reinforced, Chloroprene Covered, Noncollapsing |
|
SAE AMS 3568/3A |
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 20 Pounds/Cubic Foot (320 kg/m3) Density |
|
SAE AMS 3601D |
Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention |
|
SAE AMS 3695/2 |
Adhesive Film, Epoxy-Base, High Durability for 120 Degrees C (250 Degrees F) Service |
|
SAE AMS 3778/1A |
Tape, Woven, Nylon 350 Pounds Force (1557 N) |
|
SAE AMS 3778/2A |
Tape, Woven, Nylon 290 Pounds Force (1290 N) |
|
SAE AMS 3782/5A |
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.70 Ounce per Linear Yard (28 g/Linear m) |
|
SAE AMS 3787/5A |
Thread, Para-Aramid Intermediate Modulus 2000 Yards per Pound (4032 m/kg), 80 Pounds Force (356 N) Breaking Strength |
|
SAE AMS 3843C |
Polytetrafluoroethylene Sheet Asbestos Fiber Reinforced High Compressibility, Low Density |
|
SAE AMS 3867/6A |
Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E180 (Type B0.203-E82) |
|
SAE AMS 3892/8A |
Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) Tensile Modulus |
|
SAE AMS 3894/7B |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 80 (176) |
|
SAE AMS 3898/1B |
Interleaf Carrier Material, Composite Tape Parchment, 0.004 inch (0.10 mm), Unperforated |
|
SAE AMS 3903/2A |
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 181, 175 (350) |
|
SAE AMS 3904B |
(R) Organic Fiber (Para-Aramid), Yarn and Roving Intermediate Modulus for Cables, Cordage, and Woven Goods |
|
SAE AMS 4278B |
Aluminum Alloy, Alclad Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed, Fine Grained-UNS A87075 |
|
SAE AMS 4308A |
ALUMINUM ALLOY, SHEET 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened-UNS A98009 |
|
SAE AMS 4425C |
Magnesium Alloy Castings, Sand 5.8Zn - 2.5RE - 0.70Zr (ZE63-T6) Solution and Precipitation Heat Treated |
|
SAE AMS 4780E |
Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range-UNS M26800 |
|
SAE AMS 4825D |
Bearings, Leaded Bronze 74Cu - 15.5Pb - 10Sn Steel Back |
|
SAE AMS 5605E |
Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 Degrees F (982 Degrees C) Solution Heat Treated-UNS N09706 |
|
SAE AMS 5623C |
Steel Bars and Forgings, High Expansion 9.5Ni - 5.5Mn (0.55 - 0.65C) Annealed-UNS K91456; Reaffirmed Non-current April 2006 |
|
SAE AMS 6342J |
Steel Bars, Forgings, and Tubing 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840)-G98400 |
|
SAE AMS 6533C |
Steel, Welding Wire 2.0Cr - 10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) Vacuum Melted, Environment Controlled Packaging-UNS K92571 |
|
SAE AMS 7284/2 |
Rings, Sealing, Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel-Resistant 75 - 85 Shore A |
|
SAE AMS 7717D |
Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Annealed, Forming Grade-UNS K95000 |
|
SAE AMS 1371 |
Compound, Rust Remover, Solid/Powder Aircraft and Aerospace Components, Immersion Tank Method |
|
SAE AMS 2505E |
Aluminum Paint Finishing Low Baking-Reaffirmed Noncurrent May 2005 |
|
SAE AMS 3022C |
Reference Fluid for Testing Hydrocarbon Fuel Resistant Materials: 10% Aromatic Content |
|
SAE AMS 3122E |
Enamel, Phenolic, Black Baking-REAF Non-current Feb 2004 |
|
SAE AMS 3271A |
Cloth, Knitted Nylon Stretch Polychloroprene Coated |
|
SAE AMS 3272/2A |
Cloth, Nylon, Polyurethane Coated Plain Weave, 4.0 Ounces/Square Yard (135 g/m2) |
|
SAE AMS 3571/6B |
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 95 Durometer |
|
SAE AMS 3571/7B |
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer |
|
SAE AMS 3613C |
Film, Copper Clad Polyester |
|
SAE AMS 3687B |
Adhesive Film, Humidity-Resistant, Epoxy for Sandwich Panels, -55 to +95 Degrees C (65 to +200 Degrees F) |
|
SAE AMS 3705A |
Epoxy Resin, Cycloaliphatic Liquid |
|
SAE AMS 3718/1A |
Webbing, Woven Nylon for Decelerators 3/4 (19) Wide, 3000 (13,350) Breaking Strength |
|
SAE AMS 3796/3A |
Webbing, Nylon/Polyester, Aircraft Arresting Center Pick 130,000 Pounds (578 kN) |
|
SAE AMS 3797/11B |
Webbing, Nylon, Integral Locking Slots 1-1/8 (29) Wide, 11,000 (48,930) Breaking Strength |
|
SAE AMS 3797/4B |
Webbing, Nylon, Integral Locking Slots 1 (25) Wide, 4000 (17,793) Breaking Strength |
|
SAE AMS 3801/5A |
Cloth, Parachute, Meta-Aramid, Low Modulus 18.0(610) Weight, Basket Weave, Resin Treated |
|
SAE AMS 3806E |
Cloth, Airplane, Mercerized Cotton 80 Pounds Force (356 N) Breaking Strength |
|
SAE AMS 3898/6A |
Interleaf Carrier Material, Composite Tape Differentially Coated Paper, Unperforated 0.0032 inch (0.081 mm) |
|
SAE AMS 3904/11A |
(R) Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 15,000 Denier (16,700 Dtex), 0.9% Finish |
|
SAE AMS 3904/2B |
(R) Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 400 Denier (440 Dtex), 1.0% Finish |
|
SAE AMS 3904/3B |
(R) Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1000 Denier (1110 Dtex), 1.0% Finish |
|
SAE AMS 3908A |
Cloth, Aramid, (PARA) Plain Weave, Thermally Stable |
|
SAE AMS 4710G |
Brass Wire, Tinned 65Cu - 35Zn Annealed (061) |
|
SAE AMS 5378F |
Alloy Castings, Investment, Corrosion and Heat Resistant 65.5Co - 25Cr - 1.8Ni - 5.0W as Cast-UNS R30023 |
|
SAE AMS 5700F |
Steel, Corrosion and Heat Resistant, Bars, Forgings, and Rings 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed |
|
SAE AMS 5916 |
Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 35Fe - 24Cr - 37Ni - 0.65Cb - 0.2N Annealed-UNS N08120 |
|
SAE AMS 6423E |
Steel Bars, Forgings, and Tubing 0.92Cr - 0.75Ni - 0.52Mo - 0.003B - 0.04V (0.40 - 0.46C)-UNS K24336 |
|
SAE AMS 6467D |
Steel Welding Electrodes, Covered 5Cr - 0.55Mo-UNS S50200; Reaffirmed Non-current April 2006 |
|
SAE AMS 7819C |
Molybdenum Alloy Bars 0.48Ti - 0.09Zr - 0.02C Arc Cast, Stress Relieved-UNS R03640 |
|
SAE AMS-A-8625A |
Anodic Coatings for Aluminum and Aluminum Alloys |
|
SAE AMS-F-24610 |
Fixant, Hold Down |
|
SAE AMS-T-9047A |
Titanium and Titanium Alloy, Bars (Rolled or Forged) and Reforging Stock, Aircraft Quality |
|
SAE MAM 2252C |
Tolerances, Metric Low-Alloy Steel Sheet, Strip, and Plate |
|
SAE MAM 2261D |
Tolerances, Metric Nickel, Nickel Alloys, and Cobalt Alloy Bars, Rods, and Wire |
|
SAE AMS 1500C |
SOAP, LIQUID HAND Coconut-Oil Base |
|
SAE AMS 2309A |
Magnetic Rubber Inspection Material |
|
SAE AMS 2450G |
Sprayed Metal Finish, Aluminum |
|
SAE AMS 3055B |
Petroleum Base Instrument Bearing Lubricant Viscosity 15 |
|
SAE AMS 3359B |
Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa-s) Viscosity |
|
SAE AMS 3571/8B |
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer |
|
SAE AMS 3599A |
Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin, Flammability Controlled |
|
SAE AMS 3704A |
Adhesive, Contact Polychloroprene (CR) Rubber, Resin Modified |
|
SAE AMS 3718/3A |
Webbing, Woven Nylon for Decelerators 1 (25) Wide, 6000 (26,700) Breaking Strength |
|
SAE AMS 3731/4B |
Potting Compound, Epoxy Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component |
|
SAE AMS 3731/8B |
Potting Compound, Epoxy Bisphenol A-Type Filled, Heat Cure, High HDT |
|
SAE AMS 3731/9B |
Potting Compound, Epoxy Flexible, Thermal Shock Resistant, Heat Cure |
|
SAE AMS 3731B |
Potting Compound, Epoxy Bisphenol A-Type |
|
SAE AMS 3792/3A |
Tape, Low Modulus Aramid 2 (51), 3000 (13,345) Breaking Strength |
|
SAE AMS 3794A |
Thread, Aramid, Spun Staple |
|
SAE AMS 3797/10B |
Webbing, Nylon, Integral Locking Slots 1-1/8 (29) Wide, 10,000 (44,482) Breaking Strength |
|
SAE AMS 3797/6B |
Webbing, Nylon, Integral Locking Slots 1-1/16 (27) Wide, 6000 (26,689) Breaking Strength |
|
SAE AMS 3880C |
Crystallized Glass Ceramic |
|
SAE AMS 3898/9A |
Interleaf Carrier Material, Composite Tape/Broadgoods Kraft, Differentially Coated Paper, Unperforated 0.0050 inch ± 0.0005 (0.127 mm ± 0.013) |
|
SAE AMS 3899/2B |
Carbon Fiber Tape and Sheet Polysulfone Resin Impregnated C PS 140 (965) Tensile, 27 (186) Modulus, 120 (248) |
|
SAE AMS 3899B |
Carbon Fiber Tape and Sheet Polysulfone Resin Impregnated |
|
SAE AMS 3901/7C |
(R) Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/20.9 Tensile Strength, 16.5 (114)/895 Tensile Modulus 2160 Denier, (2400 d tex), 0.6% Finish |
|
SAE AMS 3901/9B |
(R) Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 17.5 (121)/970 Tensile Modulus 380 Denier (420 d tex), 1.2% Finish |
|
SAE AMS 3904/1B |
(R) Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 200 Denier (220 Dtex), 1.0% Finish |
|
SAE AMS 4213 |
Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged |
|
SAE AMS 4553C |
Brass, Seamless, Tubing 85Cu - 15Zn Annealed (061) |
|
SAE AMS 5715E |
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 60.5Ni - 23Cr - 14Fe - 1.4Al Annealed-UNS N06601 |
|
SAE AMS 5914A |
Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated-Composition similar to UNS N07719 |
|
SAE AMS 1388A |
Remover, Temporary Coating Alkaline Type, Water Base |
|
SAE AMS 1541C |
Cleaner, Fuel Drop Tank Water-Soluble-FSC 6850 |
|
SAE AMS 1548A |
Cleaner, Turbine Engine Gas Path Solvent Emulsion Type |
|
SAE AMS 2690C |
Parallel Gap Welding Microelectronic Interconnections to Thin Film Substrates-Reaffirmed Non-current April 2006 |
|
SAE AMS 3151B |
Fluid, Aircraft Compass |
|
SAE AMS 3573B |
Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 to 90 |
|
SAE AMS 3588D |
Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Clear, Very Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio |
|
SAE AMS 3731/1B |
Potting Compound, Epoxy Bisphenol A-Type Unfilled, Room Temperature Cure |
|
SAE AMS 3779/2A |
Tape, Adhesive, Pressure-Sensitive Thermal Radiation Resistant, Aluminum Coated Glass Cloth |
|
SAE AMS 3792/1A |
Tape, Low Modulus Aramid 2 (51), 300 (1334) Breaking Strength |
|
SAE AMS 3792B |
(R) Tape, Low Modulus Aramid 300 (1334), 1000 (4448) and 8000 (13,345) Breaking Strength |
|
SAE AMS 3793/2A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 9/16 Inch (14mm), 0.08 to 0.13 Ounces per Yard (2.5 to 4.0 g/m) |
|
SAE AMS 3793/3A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 3/4 Inch (19mm), 0.11 to 0.60 Ounces per Yard (3.4 to 18.6 g/m) |
|
SAE AMS 3793/9A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 2.00 Inches (50mm), 0.12 to 1.10 Ounces per Yard (3.7 to 34.1 g/m) |
|
SAE AMS 3797/1B |
Webbing, Nylon, Integral Locking Slots 5/8 (15.9) Wide, 1000 (4448) Breaking Strength |
|
SAE AMS 3797/8B |
Webbing, Nylon, Integral Locking Slots 1-1/16 (27) Wide, 8000 (35,586) Breaking Strength |
|
SAE AMS 3801/3A |
Cloth, Parachute, Meta-Aramid, Low Modulus 12.0(407) Weight, Special Weave |
|
SAE AMS 3816C |
Braid, Flat, Nylon, Electrical Tying Wax Coated |
|
SAE AMS 3820A |
Tape, Nylon Cloth for Ring-Slot Parachutes |
|
SAE AMS 3894/17A |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200 (1379) Tensile, 18.0 (124) Modulus, 120 (248) |
|
SAE AMS 3898/4B |
Interleaf Carrier Material, Composite Tape Paper, 0.004 inch (0.10 mm), Perforated |
|
SAE AMS 3901/6C |
(R) Roving, Organic Fiber (Para-Aramid), High Modulus OR 500 (3447)/23.5 Tensile Strength, 17.5 (121)/890 Tensile Modulus 4560 Denier, (5070 d tex), 0.6% Finish |
|
SAE AMS 3909/1A |
(R) Cloth, Aramid 3.0 Ounces per Square Yard (102 g/m2), 350 Pounds Force per Inch (61,294 N/m) |
|
SAE AMS 4285C |
(R) Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated-UNS A03560 |
|
SAE AMS 4294 |
Aluminum Alloy Extrusions 1.0Mg - 0.60Si - 0.28Cr (6061-T5511) Press Heat Treated, Stress Relieved by Stretching, Straightened, and Artificially Aged-UNS A96061 |
|
SAE AMS 4299 |
Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged-UNS A97449 |
|
SAE AMS 4405 |
Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Solution Heat Treated and Naturally Aged |
|
SAE AMS 5714D |
Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe Precipitation Hardenable-UNS N07722 |
|
SAE AMS 6433E |
Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C)-UNS K33517 |
|
SAE AMS 7848C |
Tantalum Alloy, Bars and Rods 90Ta - 10W-UNS R05255; Supersedes SAE AMS 7846:1988 |
|
SAE AMS-G-81937 |
Grease, Instrument, Ultra-Clean, Metric-Replaces MIL-G-81937 |
|
SAE MAM 2232C |
Tolerances, Metric Carbon Steel, Sheet, Strip, and Plate |
|
SAE MAM 2303E |
Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (SI) Measurement |
|
SAE AMS 2517A |
Dimer, Dichloro 2,2 Para-Cyclophane |
|
SAE AMS 3210G |
Chloroprene (CR) Rubber Electrical Resistant 65 - 75 |
|
SAE AMS 3272/3A |
Cloth, Nylon, Polyurethane Coated Plain Weave, 9.2 Ounces/Square Yard (310 g/m2) |
|
SAE AMS 3361B |
Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pa-s) Viscosity |
|
SAE AMS 3387E |
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Textile Reinforced, Chloroprene Covered Noncollapsing |
|
SAE AMS 3389D |
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber, Double Wire Braid Reinforced, Chloroprene Covered, Noncollapsing |
|
SAE AMS 3733B |
Potting Compound, Epoxy Two Part, Highly Filled, Heat Cure, High Compressive Strength |
|
SAE AMS 3792/2A |
Tape, Low Modulus Aramid 2 (51), 1000 (4448) Breaking Strength |
|
SAE AMS 3793/10 |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 5/16 Inch (7.9mm), 0.053 Ounces per Yard (1.64 g/m) |
|
SAE AMS 3793/6A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/4 Inches (31mm), 0.23 Ounces per Yard (7.1 g/m) |
|
SAE AMS 3797/7B |
Webbing, Nylon, Integral Locking Slots 1-1/16 (27) Wide, 7000 (31,138) Breaking Strength |
|
SAE AMS 3797/9B |
Webbing, Nylon, Integral Locking Slots 1-1/8 (29) Wide, 9000 (40,034) Breaking Strength |
|
SAE AMS 3800A |
Cloth, Knitted, Polyamide, High Temperature Resistant Reverse Jersey |
|
SAE AMS 3811B |
Rods, Aramid Fiber, Polyester Resin Coated Pultrusion |
|
SAE AMS 3832C |
Roving, Type |
|
SAE AMS 3895B |
Broadgoods and Tape, Carbon Fiber-Epoxy Resin Impregnated Multi-Ply, Uniform Fiber |
|
SAE AMS 3897/1 |
Carbon Fiber Cloth 8HS Style Fabric Epoxy Resin Impregnated |
|
SAE AMS 3898/5B |
Interleaf Carrier Material, Composite Tape Polyethylene Coated Paper, Perforated 0.0035 inch (0.089 mm) |
|
SAE AMS 3898/8A |
Interleaf Carrier Material, Composite Tape/Broadgoods Kraft, Differentially Coated Paper, Unperforated 0.0038 inch ± 0.0004 (0.097 mm ± 0.010) |
|
SAE AMS 3913B |
Radome, Foam Sandwich Hot-Melt, Addition-Type Polyimide |
|
SAE AMS 4326 |
Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles 1.0 Mg - 0.80 Si - 1.8 Cu - 0.20 Cr (2013 -T6511) Solution Heat Treated, Stress-Relieved by Stretching, and Aged-UNS A92013 |
|
SAE AMS 5405B |
Alloy Castings, Investment, Corrosion and Heat Resistant 64Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.08Zr Vacuum Melted, Vacuum Cast as Cast |
|
SAE AMS 5407B |
Alloy Castings, Investment, Corrosion and Heat Resistant 60Ni - 9.0Cr - 10Co - 12.5W - 1.0Cb - 2.0Ti - 5.0Al - 0.015B - 0.06Zr Vacuum Melted, Vacuum Cast as Cast |
|
SAE AMS 5890D |
Nickel, Corrosion and Heat Resistant, Bars, Forgings, and Extrusions Thoria Dispersion Strengthened 2.2ThO2 Stress-Relieved-UNS N03260 |
|
SAE AMS 5933 |
Steel, Corrosion Resistant Bars and Forgings 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted |
|
SAE AMS 6299E |
Steel Bars, Forgings and Tubing 0.50Cr - 1.8Ni - 0.25Mo (0.17 - 0.23C) (SAE 4320H)-UNS H43200 |
|
SAE AMS 6469D |
Steel, Welding Wire 1.75Mn - 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) Vacuum Melted, Environment-Controlled Packaging |
|
SAE AMS 6946 |
Titanium Alloy, Sheet, Strip, and Plate 4Al - 2.5V - 1.5Fe Annealed |
|
SAE AMS 7857B |
Columbium (Niobium) Alloy Bars, Rods, and Extrusions 10Hf - 1.0Ti, Recrystallization Annealed-UNS R04295 |
|
SAE AMS-C-83873 |
Cleaning Compound, Precoating Surface, Aircraft and Aerospace Ground Equipment (AGE) |
|
SAE AMS-R-83248A |
Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant |
|
SAE MAM 2251C |
Tolerances, Metric Low-Alloy Steel Bars |
|
SAE AMS 1742 |
Compound, Alkaline Solvent Cleaner Aircraft Turbine Engine Components Room Temperature Application |
|
SAE AMS 3158B |
Solution, Fluorescent Penetrant Water Base |
|
SAE AMS 3252J |
Synthetic Rubber and Cork Composition, General Purpose, Firm |
|
SAE AMS 3718/4A |
Webbing, Woven Nylon for Decelerators 1-23/32 (43) Wide, 8700 (38,700) Breaking Strength |
|
SAE AMS 3725/2A |
Core, Polyurethane Foam (Polyether) 4.0 Pounds per Cubic Foot (64 kg/m3) Density |
|
SAE AMS 3731/10B |
Potting Compound, Epoxy Bisphenol A-Type Unfilled, Room Temperature Cure, Semiflexible |
|
SAE AMS 3731/3B |
Potting Compound, Epoxy Bisphenol A-Type Filled, Heat Cure, Machinable |
|
SAE AMS 3795/1A |
Webbing, Woven Nylon Fabric 6000 Pounds (26,700 N), 1.8 Ounces/ Yards (56 g/m) |
|
SAE AMS 3795/2A |
Webbing, Woven Nylon Fabric 9000 Pounds (40,050 N), 2.5 Ounces/ Yards (77.5 g/m) |
|
SAE AMS 3796/1A |
Webbing, Nylon, Aircraft Arresting 105,000 Pounds (467 kN) |
|
SAE AMS 3804D |
Cloth, Airplane, Cotton, Mercerized 65 Pounds (290 N) Breaking Strength |
|
SAE AMS 3812B |
Rods, Glass Fiber, Polyester Resin, Coated Pultrusion |
|
SAE AMS 3814/1A |
Cord, Coreless, Para-Aramid Intermediate Modulus 35 lb (155 N), 13 500 ft per lb (9070 m/kg)- 02/1996; |
|
SAE AMS 3856/1A |
Cloth, Upholstery, Flame Resistant Novoloid/ Aramid, Waffle Type Weave |
|
SAE AMS 3856/2A |
Cloth, Upholstery, Flame Resistant Aramid, Plain Weave |
|
SAE AMS 3894/13A |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 131,000 (903) Tensile, 25,000,000 (172) Modulus, 175 (347) |
|
SAE AMS 3901/14A |
(R) Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/22.3 Tensile Strength, 16.5 (114)/855 Tensile Modulus 2840 (3160 d tex) Denier, 0.6% Finish |
|
SAE AMS 3901/15A |
(R) Roving, Organic Fiber (Para-Aramid), High Modulus OR 400 (2758)/22.7 Tensile Strength, 16.5 (114)/935 Tensile Modulus 7350 Denier, (8200 d tex), 0.6% Finish |
|
SAE AMS 3904/10A |
(R) Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 15,000 Denier (16,700 Dtex), 7.0% Finish |
|
SAE AMS 3904/6A |
(R) Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1500 Denier (1670 Dtex), 7.0% Finish |
|
SAE AMS 3909/2A |
(R) Cloth, Aramid 2.25 Ounces per Square Yard (76.3 g/m2), 250 Pounds Force per Inch (43,782 N/m) |
|
SAE AMS 4305 |
Aluminum Alloy, Extruded Profiles (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged-Composition similar to UNS A97449 |
|
SAE AMS 4328A |
Aluminum Alloy, Plate (2397-T87) 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged-UNS A92397 |
|
SAE AMS 5721C |
STEEL BARS, CORROSION AND HEAT RESISTANT 20CR - 9NI - 1.4MO - 1.4W - 0.42(Cb + Ta) - 0.22Ti-UNS K63198 |
|
SAE AMS 7730E |
Depleted Uranium Castings |
|
SAE AMS-L-P-390A |
Plastic, Molding and Extrusion Material Polyethylene and Copolymers (Low, Medium, and High Density) |
|
SAE AMS-S-6049B |
Steel, Chrome-Nickel-Molybdenum (8740) Bars and Reforging Stock (Aircraft Quality) |
|
SAE MAM 2221D |
Tolerances, Metric Copper and Copper Alloy Bars and Rods |
|
SAE MAM 2244C |
Tolerances, Metric Titanium and Titanium Alloy Tubing |
|
SAE MAM 4141B |
Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated-UNS A97075 |
|
SAE AMS 2268B |
Chemical Check Analysis Limits Cast Nickel and Nickel Alloys-Superseding AMS 2268A |
|
SAE AMS 2602E |
Pressure Testing 25 psi |
|
SAE AMS 3108E |
Primer, Ocher Phenolic |
|
SAE AMS 3793/11 |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 3/8 Inch (9.5mm), 0.035 Ounces per Yard (1.09 g/m) |
|
SAE AMS 3793/8A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-3/4 Inches (44mm), 0.17 to 2.50 Ounces per Yard (5.3 to 77.5 g/m) |
|
SAE AMS 3894/12A |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 18,000,000 (124) Modulus, 120 (248) |
|
SAE AMS 3894/15A |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 21,000,000 (145) Modulus, 175 (347) |
|
SAE AMS 3901/13A |
(R) Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.0 Tensile Strength, 16.5 (114)/875 Tensile Modulus 2450 (2720 d tex) Denier, 0.6% Finish |
|
SAE AMS 3901/17A |
(R) Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.5 Tensile Strength, 16.5 (114)/950 Tensile Modulus 720 Denier, (800 d tex), 1.2% Finish |
|
SAE AMS 3907A |
(R) Cloth, Aramid Basket and Plain Weave |
|
SAE AMS 3909/3A |
(R) Cloth, Aramid 2.0 Ounces per Square Yard (68 g/m2), 230 Pounds Force per Inch (40,279 N/m) (Warp) and 220 Pounds Force per Inch (38,528 N/m) (Filling) |
|
SAE AMS 3909B |
Cloth, Aramid Intermediate Modulus |
|
SAE AMS 5035A |
Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C)-UNS K23015 |
|
SAE AMS 5819A |
Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire 62Co - 27Cr - 2.9Ni - 5.5Mo-UNS R30021 |
|
SAE AMS 6317H |
Steel Bars and Forgings 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength-UNS K22440 |
|
SAE AMS 6453B |
Steel, Welding Wire 0.30Cr - 1.8Ni - 0.40Mo - (0.23 - 0.28C) Vacuum Melted, Environment Controlled Packaging-UNS K32550 |
|
SAE AMS 7292A |
Labels, Aluminum Foil Etched, Anodized, and Dyed- 10/1998, |
|
SAE AMS-D-81956 |
Detergent, External Removable Fuel Tanks-Replaces MIL-D-81956 |
|
SAE AMS-R-81841A |
Rotary Flap Peening of Metal Parts |
|
SAE AMS-R-81903 |
Remover, Acid Activated, For Amine-Cured Epoxy Coating Systems |
|
SAE AMS-S-5626A |
Steel: Chrome-Molybdenum (4140) Bars, Rods, and Forging Stock (For Aircraft Applications) |
|
SAE AMS-S-6090B |
Steel Carburizing and Nitriding, Processes for |
|
SAE MAM 6415C |
Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)-UNS G43406 |
|
SAE AMS 3157C |
Oil Fluorescent Penetrant High Fluorescence, Solvent Soluble |
|
SAE AMS 3718/6A |
Webbing, Woven Nylon for Decelerators 1 3/4 (44) Wide, 10,000 (44,500) Breaking Strength |
|
SAE AMS 3731/5B |
Potting Compound, Epoxy Bisphenol A-Type Filled, Room Temperature Cure, Low Exotherm |
|
SAE AMS 3732A |
Potting Compound, Epoxy One Part, Filled, Heat Cure, Low CTE |
|
SAE AMS 3791A |
Cloth, Marquisette, Nylon |
|
SAE AMS 3793/12 |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 5/8 Inch (15.9mm), 0.25 Ounces per Yard (7.75 g/m) |
|
SAE AMS 3793/5A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/8 Inches (28mm), 0.23 to 2.00 Ounces per Yard (7.1 to 62.0 g/m) |
|
SAE AMS 3802E |
Cloth, Airplane, Cotton, Mercerized 50 Pounds (220 N) Breaking Strength |
|
SAE AMS 3841A |
Cloth, Cotton Twill Fire Retardant Treated |
|
SAE AMS 3856/3A |
Cloth, Upholstery, Flame Resistant Nylon, Jacquard Weave |
|
SAE AMS 3894/16A |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 21,000,000 (145) Modulus, 175 (347) |
|
SAE AMS 3898/7A |
Interleaf Carrier Material, Composite Tape Differentially Coated Paper, Unperforated 0.0042 in. (0.107 mm) |
|
SAE AMS 3904/12A |
(R) Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 4500 Denier (5000 Dtex), .9% Finish |
|
SAE AMS 3904/5B |
(R) Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1500 Denier (1670 Dtex), .09% Finish |
|
SAE AMS 3904/7A |
(R) Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1500 Denier (1670 Dtex), Zero Finish |
|
SAE AMS 3907/2 |
Cloth, Aramid 4.3 oz per sq yd (145 g/m2) Plain Weave |
|
SAE AMS 4426A |
Castings, Sand, Magnesium Alloy 5.1Y - 3.0Re - 0.70Zr (WE54 - T6) Solution and Precipitation Heat Treated-UNS M18410 |
|
SAE AMS 4554A |
Brass Tubing, Seamless 66.5Cu - 33Zn - 0.45Pb Annealed-UNS C33000 |
|
SAE AMS 4725E |
Copper-Beryllium Alloy Wire 98Cu - 1.9Be Solution Heat Treated |
|
SAE AMS 5574E |
Steel, Corrosion and Heat Resistant, Seamless Tubing 23Cr - 13.5Ni (SAE 30309S) Solution Heat Treated-UNS S30908 |
|
SAE AMS 5673D |
Steel Wire, Corrosion and Resistant 17Cr - 7.1Ni - 1.1Al Precipitation Hardenable, Spring Temper |
|
SAE AMS 5795F |
Iron Alloy, Corrosion and Heat Resistant, Covered, Welding Electrodes 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb + Ta)-Reaffirmed Noncurrent May 2004; UNS W73155 |
|
SAE AMS 6396D |
Steel Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed-UNS K22950 |
|
SAE AMS 6522C |
Steel Plate 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and Overaged-UNS K92571 |
|
SAE AMS 7707C |
Iron, Commercially Pure, Bar, Sheet, Strip, and Plate Hot Rolled, Unannealed-UNS K00095 |
|
SAE AMS 7852B |
Columbium (Niobium) Alloy Sheet, Strip, and Plate, 10Hf - 1.0Ti-UNS R04295 |
|
SAE AMS-STD-2219A |
Fusion Welding for Aerospace Applications |
|
SAE AMS 3130F |
Paint, Vehicle, Glyceryl Phthalate |
|
SAE AMS 3651D |
POLYTETRAFLUOROETHYLENE |
|
SAE AMS 3718/2A |
Webbing, Woven Nylon for Decelerators 1 (25) Wide, 4000 (17,800) Breaking Strength |
|
SAE AMS 3725/1A |
Core, Polyurethane Foam (Polyether) 2.0 Pounds per Cubic Foot (32 kg/m3) Density |
|
SAE AMS 3725A |
Core, Polyurethane Foam (Polyether) Rigid, Cellular |
|
SAE AMS 3731/2C |
Potting Compound, Epoxy Bisphenol A-Type Filled, Heat Cure, Low CTE Thermal Shock Resistant |
|
SAE AMS 3793/7A |
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/2 Inches (37.5mm), 0.12 to 0.47 Ounces per Yard (3.7 to 14.6 g/m) |
|
SAE AMS 3795/3A |
Webbing, Woven Nylon Fabric 12,000 Pounds (53,400 N), 3.3 Ounces/ Yards (102.5 g/m) |
|
SAE AMS 3796/2A |
Webbing, Nylon, Aircraft Arresting 130,000 Pounds (578 kN) |
|
SAE AMS 3796A |
Webbing, Nylon, Aircraft Arresting |
|
SAE AMS 3833A |
Cloth, Broadcloth, Polyester/Cotton Polyester Filament, End to End, (Durable Press) |
|
SAE AMS 3856A |
Cloth, Upholstery, Flame Resistant |
|
SAE AMS 3894/14A |
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 175 (347) |
|
SAE AMS 3901/16A |
(R) Roving, Organic Fiber (Para-Aramid), High Modulus OR 400 (2758)/22.7 Tensile Strength, 16.5 (114)/935 Tensile Modulus 8520 Denier, (9500 d tex), 0.6% Finish |
|
SAE AMS 4222G |
Aluminum Alloy Castings, Sand, Moderate Heat Resistance 4.0Cu - 2.0Ni - 1.5Mg - 0.12Ti (242.0P) Solution Heat Treated and Stabilized-Reaffirmed Noncurrent November 2004; UNS A02420 |
|
SAE AMS 4266A |
Aluminum Alloy, Sheet 6.5Fe - 1.3Si - 0.60V (8022-H112) Powder Metallurgy Product, Strain Hardened-UNS 98022; Reaffirmed Noncurrent April 2006 |
|
SAE AMS 4815G |
Bearings, Silver Plated Steel Back |
|
SAE AMS 5831B |
Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05Zr - 0.05La - 0.20N-UNS R30556 |
|
SAE AMS 6418H |
Steel Bars, Forgings, Tubing, and Rings 1.3Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C)-UNS K32550; 09/2000; |
|
SAE AMS 7847C |
Tantalum Alloy Sheet, Strip, and Plate 90Ta - 10W-UNS R05255 |
|
SAE AMS-STD-1595A |
Qualification of Aircraft, Missile and Aerospace Fusion Welders |
|
SAE AMS 1420B |
Coating Removal Process, Aluminum Alloy Coated Cobalt Alloys |
|
SAE AMS 1725C |
Skin Protective Compound Chemical Barrier-FSC 6850; 07/2005, |
|
SAE AMS 2604G |
Pressure Testing, Gaseous Media 40 psi |
|
SAE AMS 2616E |
Pressure Testing, Hydraulic 200 psi |
|
SAE AMS 2625E |
Pressure Testing, Hydraulic 2500 psi |
|
SAE AMS 2635D |
Radiographic Inspection- 5/1999 |
|
SAE AMS 2646D |
Contrast Dye Penetrant Inspection-Cancellation Notice |
|
SAE AMS 3071B |
CONCENTRATE, CORROSION PREVENTIVE COMPOUND, AIRCRAFT ENGINE- , |
|
SAE AMS 3076C |
Compound, Corrosion- Preventive Hard Film, Cold Application- , |
|
SAE AMS 3106A |
Primer, Adhesive, Corrosion-Inhibiting -55 to +95 Degrees C (+67 to +200 Degrees F) |
|
SAE AMS 3139A |
ADHESIVE, URETHANE TWO-PART- , |
|
SAE AMS 3185A |
Hydraulic Fluid, Nonflammable Chlorotrifluoroethylene (CTFE) Base |
|
SAE AMS 3259B |
Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360 Degrees F (182 Degrees C)-FSC 8030; 07/2005, |
|
SAE AMS 3263A |
Sealing Compound, Polythioether, Ambient Cure or Immediate Heat Cure For Aircraft Structures, Fuel Resistant With Intermittent Use To 400 °F (204 °C)- 12/2002, |
|
SAE AMS 3267B |
Sealing Compound, Low Adhesion, Corrosion Inhibiting for Removable Panels and Fuel Tank Inspection Plates |
|
SAE AMS 3360 |
SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 - 600 POISE VISCOSITY- 7/1988, |
|
SAE AMS 3534C |
ETHYLENE TETRAFLUOROETHYLENE (ETFE) MOLDINGS STRESS-RELIEVED- , |
|
SAE AMS 3552A |
FIBREBOARD, CORRUGATED SIUNGLE WALL, DOUBLE WALL- , |
|
SAE AMS 3569C |
FOAM, FLEXIBLE POLYURETHANE (PUR) OPEN PORE, POLYVINYLCHLORIDE (PVC) COATED- , |
|
SAE AMS 3581C |
CAST RODS, TUBES, AND SHAPES, METHYL METHACRYLATE PLASTIC HEAT RESISTANT- , |
|
SAE AMS 3589 |
PLASTIC TUBING, ELECTRL. INSULTN. RESIN BONDED- , |
|
SAE AMS 3590E |
PLASTIC SHEET, COPPER FACED PAPER REINFORCED PHENOLIC RESIN- , |
|
SAE AMS 3591C |
POLYETHYLENE TEREPHTHALATE PLASTIC TUBING, ELECTRICAL INSULATION - THERMALLY WELDED, HEAT SHRINKABLE 1.6 TO 1 SHRINK RATIO- , |
|
SAE AMS 3610D |
Barrier Material, Water Vapor Resistant, Flexible, Transparent- 06/1996; |
|
SAE AMS 3616C |
Resin, Polyimide, Laminating and Molding High Temperature Resistant, 370 Degrees C (700 Degrees F) Unfilled, Addition Polymer- 10/1996; |
|
SAE AMS 3620B |
PLASTIC MOLDINGS & EXTRUSIONS POLYSTYRENE- , |
|
SAE AMS 3622D |
Plastic Moldings and Extrusions, Cellulose Acetate General Purpose )- 10/1996; |
|
SAE AMS 3627D |
PLASTIC MOLDINGS AND EXTRUSIONS, METHYL METHACRYLATE HEAT - RESISTANT- , |
|
SAE AMS 3629B |
Polyvinyl Chloride Tubing, Extruded, High Temperature Electrical Insulation- 10/1996; |
|
SAE AMS 3644/1C |
PLASTIC ROD AND BAR, POLYIMIDE UNFILLED, MOLDED |
|
SAE AMS 3663 |
FABRIC, GLASS, VINYL COATED POROUS- , |
|
SAE AMS 3685B |
Adhesive, Synthetic Rubber Buna N Type- 06/1996; |
|
SAE AMS 3694/11 |
CARBON (GRAPHITE) FIBER TAPE AND SHEET- , |