|
SAE AIR 1872A |
Guide to Life Usage Monitoring and Parts Management for Aircraft Gas Turbine Engines |
|
SAE AIR 18A |
Propeller Shaft Ends - Dual Rotation (Engine Supplied Bearing) |
|
SAE AIR 1905 |
Gas Turbine Coaxial Exhaust Flow Noise Prediction |
|
SAE AIR 4150 |
Inspection of Inservice Airborne Accumulators for Corrosion and Damage |
|
SAE AIR 4175A |
(R) A Guide to the Development of a Ground Station for Engine Condition Monitoring |
|
SAE AIR 4176 |
Cost Versus Benefits of Engine Monitoring Systems |
|
SAE AIR 4295 |
Handbook for the Digital Time Division Command/Response Multiplex Data Bus Test Plans |
|
SAE AIR 4366A |
Issues and Concerns Associated with Electronic Propulsion Control System Partitioning |
|
SAE AIR 4416 |
Helicopter Turbine Engine Wash |
|
SAE AIR 4725 |
Long-Term Storage Reliability of High Pressure Gas Containers for Pneumatic Actuation Systems |
|
SAE AIR 4730 |
GSE Training Videos |
|
SAE AIR 4740 |
Safety Considerations - Smoking in Lavatories of Transport Aircraft |
|
SAE AIR 4742 |
Display Characteristics of FDI Head-Up Guidance System as Approved for the B-727 Airplane |
|
SAE AIR 4869 |
Design Considerations for Enclosed Turbofan/Turbojet Engine Test Cells |
|
SAE AIR 4886 |
Statement on Requirements for Real-Time Communication Protocols (RTCP) |
|
SAE AIR 5113 |
Legal Issues Associated with the Use of Probabilistic Design Methods |
|
SAE AIR 5121A |
Software Supportability - An Overview |
|
SAE AIR 5401 |
Aircraft Crash Axes |
|
SAE AIR 5478 |
U.S. Government Document Retention Status and Non-Government Document Replacement - Aerospace Couplings, Fittings, Hoses, and Tube Supports |
|
SAE AIR 560C |
Missile Hydraulic Pumps |
|
SAE AIR 5642 |
The Effect of Installation Power Losses on the Overall Performance of a Helicopter |
|
SAE AIR 5788 |
Common Launch Acceptability Region (CLAR) Truth Data Generator Interface Control Document (ICD) for the CLAR Approach (CLARA) |
|
SAE AIR 5826 |
Distortion Synthesis/Estimation Techniques |
|
SAE AIR 805B |
Jet Blast Windshield Rain Removal Systems for Commercial Transport Aircraft |
|
SAE AIR 847A |
Oxygen Equipment for Commercial Transport Aircraft Which Fly Above 45,000 ft-Reaffirmed Noncurrent:04/2006 |
|
SAE AIR 913 |
Rocket Ignition and Related Nomenclature |
|
SAE AIR 9968A |
Viscosity Test of Thickened Aircraft Deicing/Anti-icing Fluids |
|
SAE ARD 50066 |
Aircraft Icing Directory |
|
SAE ARD 50079 |
Human Factors Issues in Free Flight |
|
SAE ARD 5912 |
Fuel vs. Oxygen: Evaluations and Considerations |
|
SAE ARP 1172 |
Filters, Conventional, Electromagnetic Interference Reduction General Specification for |
|
SAE ARP 1178A |
Aircraft Evacuation Signal System |
|
SAE ARP 1354A |
Individual Inflatable Life Preservers |
|
SAE ARP 1384C |
(R) Passenger Safety Information Briefing Cards and Video Briefings |
|
SAE ARP 1590 |
Recommended Part Numbering Guidelines for Fluid System Components Inch System of Measurements |
|
SAE ARP 1611A |
Quality Inspection Procedure, Composites Tracer Fluoroscopy and Radiography |
|
SAE ARP 1705A |
(R) Coaxial Test Procedure to Measure the RF Shielding Characteristics of EMI Gasket Materials |
|
SAE ARP 1817A |
Battery Industrial, Lead-Acid Type, for Use in Electric Powered Ground Support Equipment |
|
SAE ARP 1894A |
(R) Useful Life Determination for Chemical Oxygen Generators |
|
SAE ARP 1964 |
Measurement of Rotocraft Interior Sound Pressure Levels |
|
SAE ARP 277A |
Propeller Attachment-Nose Mounted |
|
SAE ARP 365A |
Drives - Square Flange .600 PD Spline Accessory |
|
SAE ARP 4014 |
AIRCRAFT TURBINE ENGINE PNEUMATIC COMPONENT CONTAMINATED AIR ENDURANCE TEST |
|
SAE ARP 4056 |
Engine Exhaust System Design Considerations for Rotorcraft |
|
SAE ARP 4102/13A |
Data Link |
|
SAE ARP 4102/15A |
Electronic Data Management System (EDMS) |
|
SAE ARP 4120B |
Foldable On-Board Wheelchairs for Passengers with Disabilities |
|
SAE ARP 419A |
Automatic Pilot Installations |
|
SAE ARP 4245 |
Quantities for Description of the Acoustical Environment of the Interior of Aircraft |
|
SAE ARP 4252A |
Instrumental Methods of Determining Surface Cleanliness |
|
SAE ARP 465B |
Flange - Thermocouple |
|
SAE ARP 4721 PART 2 |
Monitoring Aircraft Noise and Operations in the Vicinity of Airports: System Validation |
|
SAE ARP 4755A |
Turboshaft/Turboprop Gas Turbine Engine Test Cell Correlation |
|
SAE ARP 4806 |
Aerospace - Deicing/Anti-Icing Self-Propelled Vehicle Functional Requirements |
|
SAE ARP 4898 |
Stands, Shipping and Storage, Aircraft Engines, Reusable |
|
SAE ARP 489A |
Leads, Shielded, High Tension, Detachable Spark Plug |
|
SAE ARP 502 |
Propeller Shaft Ends - Flanged Small Aircraft Engine |
|
SAE ARP 5062 |
Recommended Test Fluids for Electrical Components Used on Aircraft Exterior or for Ground Support Near Aircraft |
|
SAE ARP 5285A |
Towbarless Towing Vehicle Operating Procedure |
|
SAE ARP 5483/2 |
Rolling Element Bearing Hardness Test |
|
SAE ARP 581A |
Universal Horizontal Field Maintenance Stand for 10,000 Pound Weight Class Propulsion Units (48 inch and 30 inch Rail Gage) |
|
SAE ARP 582C |
Lighting, Integral, For Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments |
|
SAE ARP 680C |
Universal Turnover Build-Up Stand Series for Propulsion Units and/or Components |
|
SAE ARP 715A |
Performance Acceptance Testing of Air Turbine Starters |
|
SAE ARP 721 |
Turbine Drive Shaft Connection |
|
SAE ARP 739 |
Gas Power Servos and Reaction Control Systems |
|
SAE ARP 843A |
Chip Detector, Electrical Connection, Remote Indicating |
|
SAE ARP 86B |
Heater, Airplane, Engine Exhaust Gas to Air Heat Exchanger Type |
|
SAE ARP 924A |
Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments |
|
SAE AS 100007C |
Gasket - Type XIX Engine Accessory Drive |
|
SAE AS 115651 THRU AS 115700 |
Screw - Flat Fillister Head, Drilled Shank, .250-28 |
|
SAE AS 116101 THRU AS 116150A |
(R) SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3750-24 UNF-3A-FSC 5305 |
|
SAE AS 1224B |
Continuous Flow Aviation Oxygen Masks (for Non-Transport Category Aircraft) |
|
SAE AS 1259 |
Drive Pad Breech QAD Assembly |
|
SAE AS 1260 |
Equivalent Sections of Certain Shapes to Round Bars |
|
SAE AS 127193 THRU AS 127492 |
Stud - Straight, Necked, .4375-16 X .4375-20-FSC 5307 |
|
SAE AS 152901 THRU AS 153200A |
(R) STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A-FSC 5307 |
|
SAE AS 153201 THRU AS 153500 |
Stud, Stepped, Drilled, 1.5 Dia Engagement, .375-16 x .3125-24 |
|
SAE AS 1607A |
Valve, Starter Control, Pneumatic, Aircraft Engine General Specification for-(Replaced SAE ARP 1607) |
|
SAE AS 1613A |
Image Quality Indicator Radiographic |
|
SAE AS 1867 |
HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 45° TO 90° |
|
SAE AS 1920 |
Plug-Protective Dust and Fluid Seal, Flareless Fitting |
|
SAE AS 20708/14 |
Synchro, Control Transmitter, Type 15CX4D-FSC 5990; Should Be Used Instead of MIL-S-20708/14G, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/16 |
Synchro, Control Differential Transmitter, Type 15CDX4D-FSC 5990; Should Be Used Instead of MIL-S-20708/16F, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/19 |
Synchro, Torque Receiver Transmitter, Type 15TRX4A-FSC 5990; Should Be Used Instead of MIL-S-20708/19G, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/29 |
Synchro, Control Transformer, Type 18CT4C-FSC 5990; Should Be Used Instead of MIL-S-20708/29F, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/3 |
Synchro, Torque Receiver, Type 11TR4C-FSC 5990; Should Be Used Instead of MIL-S-20708/3E, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/34 |
Synchro, Control Transformer, Type 18CT6D-FSC 5990; Should Be Used Instead of MIL-S-20708/34E, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/5 |
Synchro, Torque Receiver, Type 26V-11TR4C-FSC 5990; Should Be Used Instead of MIL-S-20708/5E, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/6 |
Synchro, Torque Transmitter, Type 26V-11TX4C-FSC 5990; Should Be Used Instead of MIL-S-20708/6F, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/74 |
Synchro, Torque Receiver Transmitter, Type 37TRX6A-FSC 5990; Should Be Used Instead of MIL-S-20708/74E, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/8 |
Synchro, Control Transmitter, Type 26V-11CX4C-FSC 5990; Should Be Used Instead of MIL-S-20708/8E, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/80 |
Synchro, Control Differential Transmitter, Type 26V-08CDX4C-FSC 5990; Should Be Used Instead of MIL-S-20708/80F, Which Was Cancelled on 15 September 1999 |
|
SAE AS 20708/94A |
Synchro, 60 and 400 Hz, Size 23-FSC 5990 |
|
SAE AS 20C |
Definitions, Aircraft Reciprocating Engine Performance |
|
SAE AS 23479 |
Indicator, Pressure, 1 1/2-Inch, Integrally Lighted-FSC 6620; Should Be Used Instead of MIL-I-23479B(1), Which Was Cancelled on 16 August 1999 |
|
SAE AS 236 |
Adapter, Thermo-Sensitive Element |
|
SAE AS 28937 |
FUSE, LIMITER TYPE, ENCLOSED LINK,5-60 AMP, AIRCRAFT-FSC 5920 |
|
SAE AS 31001 |
CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE-FSC 5935 |
|
SAE AS 31051 |
CONNECTOR, RECEPTACLE, ELECTRIC, DUMMY STOWAGE-FSC 5935 |
|
SAE AS 31081 |
CONNECTORS, PLUG, ELECTRIC, SOLDER CONTACT, 90 DEGREE, AN TYPE-FSC 5935 |
|
SAE AS 3111 |
Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, CRES AMS 5731, .4375-20 UNJF-3A |
|
SAE AS 3115 |
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, CRES AMS 5731, .250-28 UNJF-3A |
|
SAE AS 3119 |
Bolt, Machine-Hexagon Head, Drilled 6 Holes, PD Shank, CRES AMS 5731, .500-20 UNJF-3A |
|
SAE AS 3120 |
Bolt, Machine-Hexagon Head, Drilled 6 Holes, PD Shank, CRES AMS 5731, .5625-18 UNJF-3A |
|
SAE AS 31341 |
CONNECTOR, RECEPTACLE, ELECTRIC, SOLDER TYPE, JAM NUT MOUNTING, PUSH-PULL, COUPLING, SERIES 1 (CLASS E, P, J AND H)-FSC 5935 |
|
SAE AS 3140A |
STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS 5731 .3125-24 UNJF-3A X .250-28 UNJF-3A-FSC 5307; Reaffirmed Noncurrent July 2004 |
|
SAE AS 3144 |
STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS 5731 .5625-18 UNJF-3A X .500-20 UNJF-3A |
|
SAE AS 3156 |
BOLT, MACHINE- DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS 4967, .190-32, UNJF-3A |
|
SAE AS 3177 |
Bolt, Machine - Double Hex Extended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .375-24 UNJF-3A |
|
SAE AS 3225B |
Cover - Engine Accessory Drive, Round, 10.000 Bolt Circle, AMS 4490-FSC 2995 |
|
SAE AS 33401 |
BULKHEAD BRACKET FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS-FSC 5975 |
|
SAE AS 33411 |
BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS-FSC 5975 |
|
SAE AS 3403 |
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .375-24 UNJF-3A-FSC 5306 |
|
SAE AS 3409 |
BOLT, TEE HEAD - AMS 5662, CHAMFERED, .190-32UNJF-3A (STRESS RUPTURE RESISTANT)-FSC 5306 |
|
SAE AS 34501A |
Connectors, Receptacle, Electrical, Wall Mounting, Rear Release, Crimp Contact, AN Type-FSC 5935; Should be used Instead of MS3450 |
|
SAE AS 3484B |
GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS 5553 |
|
SAE AS 3494 |
GASKET - TYPE XIII ENGINE ACCESSORY DRIVE-FSC 5330 |
|
SAE AS 3495 |
Gasket - Type XIV-C Engine Accessory Drive-FSC 5330 |
|
SAE AS 3498 |
Gasket - Engine Accessory Drive-FSC 5330 |
|
SAE AS 3549 |
Sleeve, Removable Self-Locking Nut, UNS S30403-UNS S30403; FSC 5310 |
|
SAE AS 38386/2A |
(R) CONNECTOR, AIR DUCT HOSE, GROUND COOLING, FEMALE |
|
SAE AS 38390 |
Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 160 Degrees F, Covered Pneumatic |
|
SAE AS 4008 |
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, STRAIGHT TO 90° |
|
SAE AS 4010 |
Hose Assembly, Polytetrafluoroethylene, PTFE, Metal Braid, Medium Pressure, Beam Seal, 45 Degrees to 90 Degrees |
|
SAE AS 4075 |
High Speed Ring Bus (HSRB) Standard-Superseding AS 4074.2 |
|
SAE AS 4114 |
Production Test Plan for the Time Division Command/Response Multiplex Data Bus Bus Controllers |
|
SAE AS 412B |
Carbon Monoxide Detector Instruments |
|
SAE AS 414B |
Temperature Instruments (Turbine Powered Subsonic Aircraft) |
|
SAE AS 4316 |
Elbow Assembly 45°, Flared Tube to Retained Nut, for Seal Ring |
|
SAE AS 431B |
True Mass Fuel Flow Instruments |
|
SAE AS 432B |
Tachometer Instruments (Indicator and Generator) |
|
SAE AS 4356A |
Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, 45 Degree to 90 Degree |
|
SAE AS 4476B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 45° FEMALE |
|
SAE AS 4492 |
Survivor Locator Lights |
|
SAE AS 4575A |
(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, Straight to 45 Degrees-FSC 4720 |
|
SAE AS 4579A |
(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi,275 Degrees F, Titanium Fittings, Beam Seal, 90 Degrees to 90 Degrees-FSC 4720 |
|
SAE AS 4581 |
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Flareless, Straight to 45 Degree |
|
SAE AS 4751/3 |
FLANGE END, SOLID, WIDE DESIGN STANDARD-FSC 5342 |
|
SAE AS 475A |
Gasket-Spark Igniter |
|
SAE AS 4764 |
Validation Methods for Mil-Std-1760 Aircraft Station Interfaces |
|
SAE AS 47641 |
Validation Methods for MIL-STD-1760B Aircraft Station Interfaces |
|
SAE AS 4831A |
Software Interfaces for Ground-Based Monitoring Systems |
|
SAE AS 4970 |
Human Factors Considerations for Outdoor Laser Operations in the Navigable Airspace |
|
SAE AS 4971 |
Fitting, Elbow, 90 Degree, Weld Ring |
|
SAE AS 5009 |
Fitting, Elbow, 90 Degree, External Swage, Hydraulic |
|
SAE AS 5072/3A |
Coupling Assembly, .420 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Disconnect for Ethylene/Glycol/Water |
|
SAE AS 50861/4 |
Wire, Electrical, Polyvinyl Chloride Insulated, Nylon Jacket, Tin-Coated Copper Conductor, 3000-Volt, 105°C |
|
SAE AS 5133 |
Nut, Floating, Attached Retention Element (A.R.E.) - Hole Dimensions and Installation Requirements |
|
SAE AS 5258/6 |
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile, Miniature |
|
SAE AS 5258/9 |
Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, 1 to 3 |
|
SAE AS 5419/4 |
WIRE, THERMOCOUPLE, CROSSLINKED POLYALENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 150 DEGREES C |
|
SAE AS 55941 |
Switches, Toggle, Electrically Held, Sealed, General Specification For-FSC 5930 |
|
SAE AS 5947 |
FITTING, FERRULE END - THREADED COUPLING, RIGID, SELF-BONDING, DESIGN STANDARD |
|
SAE AS 5955B |
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 45° TO 45°-FSC 4720 |
|
SAE AS 639 |
Hose, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Hydraulic, 450 Degrees F |
|
SAE AS 7115 |
National Aerospace and Defense Contractors Accreditation Program Requirements for Elastomer Seals |
|
SAE AS 714A |
Aircraft Hydraulic Start Motor |
|
SAE AS 7365/4 |
COUPLING, FEMALE, 6 INCH AIR DUCT |
|
SAE AS 7365/5 |
COUPLING, MALE, 6 INCH AIR DUCT |
|
SAE AS 7768/1 |
Light, Desk, Aircraft-FSC 6230 |
|
SAE AS 8018A |
Minimum Performance Standard for Mach Meters |
|
SAE AS 8039A |
Minimum Performance Standard General Aviation Flight Recorder |
|
SAE AS 81550 |
Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone-FSC 5970 |
|
SAE AS 81582/10 |
CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, DUMMY STOWAGE RECEPTACLE-FSC 5935 |
|
SAE AS 81582/5 |
CONNECTOR ADAPTER, RIGHT ANGLE, RFI SHIELDED, ELECTRIC CONNECTOR TO ELECTRIC CONNECTOR-FSC 5935 |
|
SAE AS 81765/4 |
Insulating Components, Molded, Electrical, Heat Shrinkable Fluoroelastomer, Flexible, Crosslinked-FSC 5970 |
|
SAE AS 81822/15 |
WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED ETHYLENE-CHLOROTRIFLUOROETHYLENE (ECTFE) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145 |
|
SAE AS 85028 |
Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For-FSC 5935; Amendment 2 - December 2004 |
|
SAE AS 85075/2 |
Tie Down Assembly, Helicopter Blade CH-53 Helicopter-FSC 1730 |
|
SAE AS 85485/11 |
CABLE, ELECTRIC, FILTER LINE, UNSHIELDED, UNJACKETED, MULTIPLE-COMPONENT, RADIO FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT-FSC 6145 |
|
SAE AS 85485/5 |
CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, TIN-COATED COPPER CONDUCTOR, RADIO FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT-FSC 6145 |
|
SAE AS 85560/1A |
(R) BEARING, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, SELF LUBRICATING, +250 °F |
|
SAE AS 85560/2A |
(R) BEARING, FIBER REINFORCED PLASTIC, SLEEVE, FLANGED, SELF-LUBRICATING, +250 °F |
|
SAE AS 8568 |
Binoculars, Prismatic, Hand-Held (for Aeronautical Use) (7 x 50 and 6 x 42 (Wide Field)) |
|
SAE AS 9374B |
GASKET - METAL O-RING, .094 TUBE X .006 WALL, SILVER PLATED, CRES - UNS S32100-FSC 5330 |
|
SAE AS 9524B |
BOLT, MACHINE - HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .5625-18 UNJF-3A |
|
SAE AS 9589 |
Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, .5625-18 UNJF-3A-FSC 5306 |
|
SAE AS 9944 |
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated, .375-24 UNJF-3A-FSC 5306 |
|
SAE AS 9964 |
Bolt, Machine, Hexagon Head, Drilled, 6 Hole, PD Shank, Steel AMS 6322, Cadmium Plated, .625-18 UNJF-3A-FSC 5306 |
|
SAE MA 1421 |
Aerospace Selected Diameter-Pitch Combinations of Metric 60 Degrees Screw Threads for Shaft or Bearing Retaining Screw Threads |
|
SAE MA 2003 |
Rotary Flexure Testing of Hydraulic Tubing Joints and Fittings |
|
SAE MA 2004A |
Thermal Shock Testing of Fluid System Piping and Fittings-ISO 6773 |
|
SAE MA 2030B |
(R) FITTING, ELBOW, 90°, THIN WALL, BULKHEAD, FLARELESS, METRIC |
|
SAE MA 2032B |
(R) Fitting, Tee, Bulkhead and Boss on Run, Flareless, Metric |
|
SAE MA 2038B |
(R) UNION, REDUCER, FLARELESS TUBE, METRIC |
|
SAE MA 2047C |
NUT, RETAINED, FLARELESS, METRIC |
|
SAE MA 2060A |
Fittings, Welded, Hydraulic, Titanium and Corrosion Resistant Steel, 21 000 kPa, Metric |
|
SAE MA 2062A |
(R) RING, WELD, 21,000 kPa, CRES, METRIC |
|
SAE MA 2070A |
(R) FITTING, TEE, INTEGRAL WELD RING, 21,000 kPa, METRIC |
|
SAE MA 2076A |
(R) FITTING END, ACORN SHORT FLARELESS, DESIGN STANDARD, METRIC |
|
SAE MA 2078A |
Test Methods, Hose Assemblies, Polytetafluoroethylene (PTFE), Metric-Same as ISO 8829 |
|
SAE MA 2106B |
HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, 90° TO 90° FITTING ENDS, METRIC-FSC 4720 |
|
SAE MA 2124 |
Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, 45 Degrees to 90 Degrees |
|
SAE MA 2153/2 |
Clamp, Loop Type, Bare Metal, Stainless Steel, Metric |
|
SAE MA 2154/1 |
Clamp, Rectangular, 2 Piece, Cushioned, with Wedges, Hydrocarbon Fluid Resistant, Metric |
|
SAE MA 2154/3 |
Clamp, Rectangular, 2 Piece, Cushioned, with Wedges, High Temperature, Metric |
|
SAE MA 2156/2 |
Clamp, Center Mount, Cushioned, Phosphate Ester Fluid Resistant, Metric |
|
SAE MA 2156/3 |
Clamp, Center Mount, Cushioned, High Temperature, Metric |
|
SAE MA 2157 |
Cross, Bulkhead, Flareless Tube-FSC 4730 |
|
SAE MA 2158 |
Cross, Swivel, Flareless Tube |
|
SAE MA 2271 |
FITTING END, BEAM SEAL, SLIP-ON NUT, DESIGN STANDARD, METRIC |
|
SAE MA 2298 |
Fitting, Elbow, 90 Degree, Bulkhead Beam Seal, Metric |
|
SAE MA 2305 |
Fitting, Union, Bulkhead, Beam Seal, Metric |
|
SAE MA 2520 |
Nut - Hex, Back-Up Ring Port Fitting Connector, AMS 5639, MJ Thread, Metric-FSC 5310 |
|
SAE MA 3343 |
Bolt, Machine - Spline Drive Extended Washer, Full Shank, Long Thread, AMS 5662, Metric-FSC 5306 |
|
SAE MA 3366 |
Bolt, Machine-Spline Drive, Extended Washer Drilled Head, Full Shank, Long Thread, AMS 5662, Metric-FSC 5306 |
|
SAE MA 3368 |
Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, Drilled, AMS5662 Metric-FSC 5306 |
|
SAE MA 3379 |
STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 6 X 1-FSC 5307 |
|
SAE MA 3383 |
STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 5 X 0.8-FSC 5307 |
|
SAE MA 3388 |
STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 5 X 0.8-FSC 5307 |
|
SAE MA 3454 |
Cover - Engine Accessory Drive, Square, 127.28 BC, Metric-FSC 2995 |
|
SAE MA 3574 |
Rivet-Solid, Universal Head, AS7232 Corrosion and Heat Resistant Nickel Alloy, Metric-FSC 5320 |
|
SAE MA 4029 |
Ring, Retaining - Internal, Beveled, Tapered, Type II Class 1 AMS 5520, Metric-FSC 5365 |
|
SAE MA 4248 |
Cap Assembly, Protective Closure, Beam Seal Fitting, Low Pressure, Metric-FSC 4730 |
|
SAE MA 620 |
Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft Metric |
|
SAE AIR 1133A |
Chemical Oxygen Supplies |
|
SAE AIR 1209 |
Construction and Calibration of Parallel Plate Transmission Line for Electromagnetic Interference Susceptibility Testing |
|
SAE AIR 1296 |
Concurrent Design of Engines and Specifications of Starting System for Helicopters |
|
SAE AIR 1316A |
Airline Tow Tractor- Baggage/Cargo Factors for Design Consideration |
|
SAE AIR 1335A |
Ramp De-Icing |
|
SAE AIR 1343A |
Liquid Propellant Gas Generation Systems |
|
SAE AIR 1353B |
Cushion Tow Hitches Test |
|
SAE AIR 1397A |
Clamp Material, Injection Molded |
|
SAE AIR 1407 |
Prediction Procedure for Near-Field and Far-Field Propeller Noise |
|
SAE AIR 1423 |
Electromagnetic Compatibility on Gas Turbine Engines for Aircraft Propulsion |
|
SAE AIR 1815 |
Safe Carriage of Impaired and Disabled Passengers |
|
SAE AIR 1898A |
Maintenance of Batteries and Battery Charging and Servicing Facilities |
|
SAE AIR 1921 |
Spark Igniter Semiconductor Resistance Measurement Using Controlled Energy Levels |
|
SAE AIR 1963A |
Cockpit Information Required for Helicopter Turbine Engine Operation and Maintenance |
|
SAE AIR 26A |
Number 70-90, 70L-90, 80-100, and 80L-100 Propeller Shaft Ends Dual Rotation (Propeller Supplied Bearing) |
|
SAE AIR 34A |
Penalties in Performance of Three-Phase, Four- Wire, 400-Cycle Motors Caused by the Opening of One Phase |
|
SAE AIR 36105 |
Air Cargo Unit Load Devices - Reference Standards |
|
SAE AIR 4391A |
Industrial and Marine Gas Turbine Engine Starting Systems |
|
SAE AIR 4495 |
Helicopter Powerplant Corrosion Protection |
|
SAE AIR 4496 |
Cabin Stowage of Personal Wheelchairs |
|
SAE AIR 4653 |
Flight Management Systems Review |
|
SAE AIR 4771 |
Recommended Brace Positions |
|
SAE AIR 4903 |
PI-Bus Handbook |
|
SAE AIR 4911 |
Requirements Document for Sensor/Video Interconnect Subsystems with Rationale |
|
SAE AIR 4979 |
Estimation of Measurement Uncertainty in Engine Tests Based on NATO AGARD Uniform Engine Test Program |
|
SAE AIR 4980 |
Modular Avionics Backplane Functional Requirements and Consensus Items (MABFRACI) |
|
SAE AIR 4985 |
A Methodology for Quantifying the Performance of an Engine Monitoring System |
|
SAE AIR 5315 |
Overview and Rationale for GOA Framework Standard |
|
SAE AIR 5373 |
Fuels in Ground Support Equipment (Other Than Gasoline or Diesel) |
|
SAE AIR 5532 |
Generic Aircraft-Store Interface Framework (GASIF) |
|
SAE AIR 5690 |
Considerations for the Carriage and Use of Visual Distress Signals in Airline Overwater Survival Kits |
|
SAE AIR 5784 |
A Review of Literature on the Relationship Between Gas Turbine Engine Lubricants and Aircraft Cabin Air Quality |
|
SAE AIR 65 |
Thermoelectric Circuits and the Performance of Several Aircraft Engine Thermocouples |
|
SAE AIR 764C |
SKID CONTROL SYSTEM VIBRATION SURVEY |
|
SAE AIR 844A |
Sensitization and Corrosion in Stainless Steel Filters |
|
SAE AIR 84A |
Ignition Peak Voltage Measurements-Reaffirmed Noncurrent June 1994 |
|
SAE AIR 853A |
Disconnect Systems, Accessory Drive Shaft |
|
SAE AIR 857A |
Speed Variation of D-C Motors |
|
SAE AIR 978A |
Diagrams and Characteristics of Typical Piston Engine Magneto Ignition Systems |
|
SAE ARD 50102 |
Forced Air or Forced Air/Fluid Equipment for Removal of Frozen Contaminants |
|
SAE ARP 1135A |
Standardization of Drive End of Hydraulic or Geared Torque Wrenches for Use to an Upper Limit of 500,000 Inch Pounds |
|
SAE ARP 1279 |
Standard Indoor Method of Collection and Presentation of the Bare Turboshaft Engine Noise Data for Use in Helicopter Installations |
|
SAE ARP 1282A |
Survival Kit - Life Rafts and Slide/Rafts |
|
SAE ARP 1320A |
Determination of Chlorine in Oxygen from Solid Chemical Oxygen Generators |
|
SAE ARP 1356A |
Life Rafts |
|
SAE ARP 1625A |
Cold Gas Systems, Missile or Projectiles Design, Installation, Tests and Requirements for-Reaffirmed Noncurrent May 2002 |
|
SAE ARP 166A |
Propeller Clearance Envelope |
|
SAE ARP 1862A |
CLEANING EFFICIENCY OF TURBINE ENGINE GAS PATH CLEANERS Laboratory Test Method |
|
SAE ARP 1961 |
Gearbox - Airframe Mounted Accessory |
|
SAE ARP 1987/4 |
Titles, SAE Subcommittee G-3A Aerospace Coupling Documents, Selection of |
|
SAE ARP 36104A |
Air Cargo Pallets and Nets Compatibility |
|
SAE ARP 4150 |
Procedure for Inspection of Inservice Airborne Accumulators for Corrosion and Damage |
|
SAE ARP 4156B |
Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification |
|
SAE ARP 4244 |
Recommended Insertion Loss Test Methods for EMI Power Line Filters |
|
SAE ARP 427A |
Pressure Ratio Instruments |
|
SAE ARP 461B |
Synchros |
|
SAE ARP 464 |
Mount-Thermocouple |
|
SAE ARP 4721 PART 1 |
Monitoring Aircraft Noise and Operations in the Vicinity of Airports: System Description, Acquisition, and Operation |
|
SAE ARP 4852B |
Design Specification for Towbarless Push-Back Tow Vehicles |
|
SAE ARP 4874 |
Electronic Propulsion Control/Aircraft Interface Control Documents |
|
SAE ARP 493A |
Knobs, Control Aircraft, Recommended Design |
|
SAE ARP 496D |
Stowage of Cabin Emergency Flotation Equipment |
|
SAE ARP 5130 |
Requirements for Alternative Coatings Used in Lieu of Nickel-Chromium Plating for Aerospace Hand Tools |
|
SAE ARP 5297 |
Recommended Qualification Tests for Halogen Miniature Lamps Less Than 35 Watts for Aircraft Applications |
|
SAE ARP 5374 |
Method of Testing Pre-Conditioned Air Equipment |
|
SAE ARP 5448/3 |
Plain Bearing Low Speed Oscillation Test |
|
SAE ARP 5448/6 |
Plain Spherical Bearing Conformity Examination |
|
SAE ARP 5483 |
Rolling Element Bearing Test Methods |
|
SAE ARP 5483/7 |
Dynamic Radial Load Test, Track Roller Bearings |
|
SAE ARP 5483/8 |
Rolling Bearing Dynamic Radial Load Test |
|
SAE ARP 5492 |
Aircraft Cargo Systems - Missing Restraint Limitations Layouts |
|
SAE ARP 5585 |
Replacement or Modification of Components on Aircraft Seat Restraint Systems by Non-Original Equipment Manufacturers |
|
SAE ARP 5627 |
Flammability Test Method For Aircraft Comfort Blankets |
|
SAE ARP 5674 |
Safety Considerations for Aircraft-Mounted Lasers Projected Into the Navigable Airspace |
|
SAE ARP 572 |
Elbow Assembly- Shielded Spark Plug- .750-20 Thread |
|
SAE ARP 590B |
Spark Plug, Aircraft Reciprocating Engine |
|
SAE ARP 667 |
Precision Motor Tachometer Generator |
|
SAE ARP 671A |
Bearing, Ball Annular-Reaffirmed Noncurrent May 2006 |
|
SAE ARP 987A |
Control of Excess Humidity in Avionics Cooling |
|
SAE AS 100001C |
Gasket-Type X or XV Engine Accessory Drive |
|
SAE AS 10051 |
Hubs, Conduit Connection, Standard Dimensions-FSC 5975 |
|
SAE AS 1159B |
Wrenching Configuration, 12 Lobed, For Threaded Fasteners |
|
SAE AS 116051 THRU AS 116100A |
(R) SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3750-16 UNC-3A-FSC 5305 |
|
SAE AS 117001 THRU AS 117040 |
Screw - Oval Fillister Head, .164-32-FSC 5305 |