SAE AS 1197A

Continuous Flow Oxygen Regulator

SAE AS 1214B

(R) Minimum Standards for Valve, High Pressure Oxygen, Line Shut Off, Manually Operated

SAE AS 127D

Propeller Shaft End, Flanged Type-No. 1, 2, 3, 4, 5, & 6

SAE AS 1325

Wrench Configuration, 12 Lobed Drive

SAE AS 1414

Propeller Shaft End - Flanged 5.125(130.175) Bolt Circle

SAE AS 14488

Clamp, Loop, Plastic, Wire Support, Ribbed Inner Diameter, Metric-FSC 5340

SAE AS 1483

Hose Assembly, Semi- Rigid, Low Pressure, Flareless, Potable Water, Straight to Straight

SAE AS 161

Lifting Eye - Propeller Shaft

SAE AS 1773

Fiber Optics Mechanization of a Digital Time Division Command/Response Multiplex Data Bus

SAE AS 177B

Operating Instructions for Aircraft Engines (Preparation of)

SAE AS 1866

HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 45° TO 45°

SAE AS 1868

Hose Assembly, Rubber, Flareless, Field Attachable Fitting, 90 Degrees to 90 Degrees

SAE AS 20708/20

Synchro, Control Transmitter, Type 15CX6C-FSC 5990; Should Be Used Instead of MIL-S-20708/20E, Which Was Cancelled on 15 September 1999

SAE AS 20708/22

Synchro, Control Differential Transmitter, Type 15CDX6C-FSC 5990; Should Be Used Instead of MIL-S-20708/22E, Which Was Cancelled on 15 September 1999

SAE AS 20708/23

Synchro, Torque Receiver Transmitter, Type 15TRX6A-FSC 5990; Should Be Used Instead of MIL-S-20708/23E, Which Was Cancelled on 15 September 1999

SAE AS 20708/28

Synchro, Control Transmitter, Type 18CX4D-FSC 5990; Should Be Used Instead of MIL-S-20708/28F, Which Was Cancelled on 15 September 1999

SAE AS 20708/32

Synchro, Torque Receiver Transmitter, Type 18TRX4A-FSC 5990; Should Be Used Instead of MIL-S-20708/32G, Which Was Cancelled on 15 September 1999

SAE AS 20708/4

Synchro, Torque Receiver, Type 11TX4C-FSC 5990; Should Be Used Instead of MIL-S-20708/4E

SAE AS 20708/45

Synchro, Control Transmitter, Type 23CX4D-FSC 5990; Should Be Used Instead of MIL-S-20708/45F, Which Was Cancelled on 15 September 1999

SAE AS 20708/50

Synchro, Torque Receiver Transmitter, Type 23TRX4A-FSC 5990; Should Be Used Instead of MIL-S-20708/50F, Which Was Cancelled on 15 September 1999

SAE AS 20708/52

Synchro, Control Transmitter, Type 23CX6D-FSC 5990

SAE AS 20708/53

Synchro, Control Transformer, Type 23CT6D-FSC 5990; Should Be Used Instead of MIL-S-20708/53E, Which Was Cancelled on 15 September 1999

SAE AS 20708/56

Synchro, Torque Receiver Transmitter, Type 23TRX6B-FSC 5990; Should Be Used Instead of MIL-S-20708/56E, Which Was Cancelled on 15 September 1999

SAE AS 20708/62

Synchro, Torque Receiver Transmitter, Type 31TRX4A-FSC 5990; Should Be Used Instead of MIL-S-20708/62F, Which Was Cancelled on 15 September 1999

SAE AS 20708/70

Synchro, Torque Receiver Transmitter, Type 37TRX4A-FSC 5990; Should Be Used Instead of MIL-S-20708/70D, Which Was Cancelled on 15 September 1999

SAE AS 20708/76

Synchro, Torque Differential Transmitter, Type 37TDX6A-FSC 5990; Should Be Used Instead of MIL-S-20708/76C, Which Was Cancelled on 15 September 1999

SAE AS 20708/78

Synchro, Control Transmitter, Type 26V-08CX4C-FSC 5990; Should Be Used Instead of MIL-S-20708/78F, Which Was Cancelled on 15 September 1999

SAE AS 20708/79

Synchro, Control Transformer, Type 26V-08CT4C-FSC 5990; Should Be Used Instead of MIL-S-20708/79F, Which Was Cancelled on 15 September 1999

SAE AS 20708/81

Synchro, Control Differential Transmitter, Type 11CDX4B-FSC 5990; Should Be Used Instead of MIL-S-20708/81E, Which Was Cancelled in 15 September 1999

SAE AS 210041

Canister, Lithium Hydroxide, Screened Ends, Friction Type Covers-FSC 8110

SAE AS 22145

Accelerometer Group, Counting (MS25447 and MS25448)-FSC 6610; Should Be Used Instead of MIL-A-22145C(AS), Which Was Cancelled on 30 August 1999

SAE AS 221A

Gasket - Two-Bolt Exhaust Flange

SAE AS 23899

Aural Protector, Sound-FSC 4240; Should Be Used Instead of MIL-A-23899B(AS), Which Was Cancelled on 30 August 1999

SAE AS 24208

CABLE AND PLUG ASSEMBLY, EXTERNAL POWER 115/200 VOLTS 3 PHASE, SINGLE POINT REFUELING-FSC 6150

SAE AS 25109

Engines, Aircraft, Reciprocating, General Specification for-FSC 2810

SAE AS 25487

CONNECTOR, PLUG, ATTACHABLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, JET STARTING-FSC 5935

SAE AS 27683

Drums, Metal - Shipping and Storage 16 to 80 Gallons-FSC 8110

SAE AS 293

Spark Plug-Spring Contact for High Voltage-Reaffirmed Noncurrent June 1994

SAE AS 29600/2

CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, BACKSHELL, SHIELD TERMINATING, (SERIES A AND B)-FSC 5935

SAE AS 29600/20

CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, RECEPTACLE, FLANGED (SERIES B)-FSC 5935

SAE AS 29600/5

CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, SELF LOCKING, ENVIRONMENTAL RESISTANT, REMOVABLE CRIMP CONTACTS, DUST COVER (SERIES A)-FSC 5935

SAE AS 29600-A1

Connectors, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts Associated Hardware, General Specification For

SAE AS 31011

CONNECTOR, PLUG, ELECTRIC, CABLE CONNECTING, SOLDER CONTACTS, AN TYPE-FSC 5935

SAE AS 3105

Bolt, Machine-Hexagon Head, PD Shank, CRES AMS 5731, .5625-18 UNJF-3A

SAE AS 31061

CONNECTOR, PLUG, ELECTRIC, STRAIGHT, SOLDER CONTACTS, AN TYPE-FSC 5935

SAE AS 31071

CONNECTOR PLUG, ELECTRIC, QUICK DISCONNECT-FSC 5935

SAE AS 31401

CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, WALL MOUNTING FLANGE, PUSH-PULL, COUPLING, SERIES 2 (CLASS E AND J)-FSC 5935

SAE AS 3141A

STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS 5731 .375-24 UNJF-3A X .3125-24 UNJF-3A-FSC 5307; Reaffirmed Noncurrent July 2004

SAE AS 3142A

STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS 5731 .4375-20 UNJF-3A X .375-24 UNJF-3A-FSC 5307; Reaffirmed Noncurrent July 2004

SAE AS 31471

CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL COUPLING, SERIES 2 (CLASS E AND J)-FSC 5935

SAE AS 31491

CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, CRIMP TYPE, SINGLE HOLE MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS N)-FSC 5935

SAE AS 3152

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 4967, .500-20 UNJF-3A-FSC 5306;

SAE AS 3153

BOLT, MACHINE- DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 4967, .5625-18, UNJF - 3A

SAE AS 31551

CONNECTOR, ELECTRIC, REAR ACCESSORY DESIGN STANDARD-FSC 5935

SAE AS 3157

BOLT, MACHINE- DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS 4967, .250-28, UNJF-3A

SAE AS 3161

Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .500-20 UNJF-3A

SAE AS 3162

Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .5625-18 UNJF-3A

SAE AS 3178

Bolt, Machine - Double Hex Extended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .4375-20 UNJF-3A

SAE AS 3249B

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A

SAE AS 33698

Insert Arrangements, Electric Connector, Shell Size 3-FSC 5935

SAE AS 33699

Insert Arrangements, Electric Connector, Shell Size 7-FSC 5935

SAE AS 33702

Insert Arrangements, Electric Connector, Shell Size 27-FSC 5935

SAE AS 34011

Connectors, Receptacle, Electric, Cable Connecting, Front Release, Crimp Contact, AN Type-FSC 5935

SAE AS 3404

Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .190-32 UNJF-3A-FSC 5306

SAE AS 34091

CONNECTORS, PLUG, ELECTRIC, 45 DEGREES ASSEMBLY, CRIMP CONTACT, AN TYPE-FSC 5935

SAE AS 3412A

Bolt, Tee Head - AMS 5662, Chamfered, .375- 24UNJF-3A (Stress Rupture Resistant)-FSC 5306

SAE AS 34361

CONNECTOR, PLUG, ELECTRIC, SOLDER CONTACT, UTILITY-FSC 5935

SAE AS 34451

CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 2 (CLASS E)-FSC 5935;

SAE AS 34461

Connector, Plug, Electric, Crimp Type, Rack and Panel, Series 3 (Class L and E)-FSC 5935

SAE AS 34521

CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE WITH-FSC 5935

SAE AS 3497

Gasket - Type XIX Engine Accessory Drive-FSC 5330

SAE AS 3503

INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED, SELF-BROACHING KEYS, OVERSIZE UNS S66286

SAE AS 3542

Cover - Type XVI, XVII-C, D, E, and F Engine Accessory Drive-FSC 2995

SAE AS 3548

Basket, Removable Self-Locking Nut, UNS S66286-UNS S66286; FSC 5310

SAE AS 38386/3

Packing, Preformed, Air Duct Hose, Ground Cooling-FSC 5330

SAE AS 391C

Airspeed Indicator (Pitot Static) (Reciprocating Engine Powered Aircraft)

SAE AS 398B

Direction Instrument, Magnetic, Non-Stabilized Type (Magnetic Compass)

SAE AS 411B

Manifold Pressure Indicating Instruments-Reaffirmed Noncurrent October 2001

SAE AS 41E

Propeller Shaft Ends - Single Rotation-Reaffirmed Noncurrent May 2006

SAE AS 429

Rate of Climb (Vertical Speed) Indicator, Pressure Actuated (Turbine Powered Subsonic Aircraft)-Reaffirmed Noncurrent July 2001

SAE AS 4312

Tee, Flared Tube with Pipe Thread on Run, for Seal Ring-FSC 4730

SAE AS 4313

Tee, Flared Tube with Pipe Thread on Side, for Seal Ring

SAE AS 4352A

Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, Straight to Straight

SAE AS 4355A

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, 45° TO 45°

SAE AS 4361

Minimum Performance Standards for Aerospace Electric Power Converters

SAE AS 437A

Maximum-Allowable- Airspeed Instruments (Turbine Powered Subsonic Aircraft)

SAE AS 440A

Automatic Pilots (Turbine Powered Subsonic Aircraft)

SAE AS 446

Cargo Compartment Fire Detection Instruments (Turbine Powered Subsonic Aircraft)-Reaffirmed Noncurrent July 2001

SAE AS 453A

Spark Igniter Gasket-Flange

SAE AS 4577A

(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, 45 Degrees to 45 Degrees-FSC 4720

SAE AS 4647

Hose Assembly, Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 4000 psi, Flared, 90 Degrees to 90 Degrees, CRES Fittings-FSC 4720

SAE AS 46A

Generator Mounting Pad and Drive, 4 Bolt-Reaffirmed Noncurrent October 2001

SAE AS 4724

Studs and Inserts, Locked In, Self-Broaching Keys - Hole Dimensions and Installation Requirements

SAE AS 4914B

(R) Aircraft Fluorescent Lighting Ballast/Fixture Safety Standard

SAE AS 4950B

(R) Design and Performance Criteria Transport Aircraft Portable Megaphones

SAE AS 5011

Fitting, Cross, External Swage, Hydraulic

SAE AS 50861/7

Wire, Electrical, Polyvinyl Chloride Insulated, Nylon Jacket, Tin-Coated Copper Conductor, Medium Weight, 600-Volt, 105 Degrees C-FSC 6145

SAE AS 518A

Drive Accessory 3.000 Pilot Diameter-QAD-Reaf. Noncur. January 2001

SAE AS 524A

Flange Accessory 6.500 Pilot Diameter - QAD-Reaffirmed Noncurrent October 2001

SAE AS 5382/3

CABLE, FIBER OPTIC, SINGLE-MODE, 6/125/250 micro m, HERMETIC COATED, TIGHT BUFFER

SAE AS 5382/5A

CABLE, FIBER OPTIC, MULTI-MODE, 50/125/450 µm, GRADED INDEX, HERMETIC COATED, TIGHT BUFFER

SAE AS 5382/6

CABLE, FIBER OPTIC, MULTI-MODE, 200/230/500 micro m, STEP INDEX, TIGHT BUFFER-FSC 6010

SAE AS 5392

Health and Usage Monitoring System, Rotational System Indexing Sensor Specification

SAE AS 5394

Health and Usage Monitoring System Advanced Multipoint Interface Specification

SAE AS 5419/2

WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION MEDIUM WEIGHT, 260 DEGREES C

SAE AS 5419/7

WIRE, THERMOCOUPLE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, NORMAL WEIGHT, 260 DEGREES C

SAE AS 55941/1

SWITCH, TOGGLE, MAGNETIC HOLD-IN SPDT-FSC 5930

SAE AS 5756/1

CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, SINGLE CONDUCTOR, NON-OZONE RESISTANT-FSC 6145

SAE AS 5756/5

CABLE, 3-PHASE POWER, ELECTRIC, PORTABLE, MULTICONDUCTOR, 90 Degree C, 600V, OZONE RESISTANT, SPLIT NEUTRAL-FSC 6145

SAE AS 5756/6

CABLE, 3-PHASE POWER, ELECTRIC, PORTABLE, MULTICONDUCTOR, 90 Degree C, 600V, OZONE RESISTANT, SPLIT PHASE-FSC 6145

SAE AS 5781

Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Scarf-Cut, For Use in AS4716 Glands

SAE AS 5957B

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 90° TO 90°-FSC 4720

SAE AS 6026

Control Unit, Pressure Generating, Manually Operated, Aircraft Hydraulic Brake System-FSC 1680

SAE AS 6053

Tests, Impact, Shock Absorber Landing Gear, Aircraft

SAE AS 6054

Drum, Metal - Shipping and Storage

SAE AS 63A

Carburetor Flange, Aircraft 4 Bolt - Single Barrel - No. 2, 3, 4, 5, 7 and 9

SAE AS 641

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, STRAIGHT TO 45°

SAE AS 642

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, STRAIGHT TO 90°

SAE AS 643

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, 45° TO 45°

SAE AS 6451

Shields, Protective, Aircraft and Missiles-FSC 1730; Should Be Used Instead of MIl-S-6451E, Which Was Cancelled on 1 July 1999

SAE AS 708A

Top Visual Quality (TVQ) O-ring Packings and Gaskets - Surface Inspection Guide and Acceptance Standard

SAE AS 7365/7

BAND, MALE COUPLING, 12 INCH AIR DUCT

SAE AS 7768

Light, Desk, Aircraft-FSC 6230

SAE AS 778A

Spark Plug Terminals and Sleeves-Reaffirmed Noncurrent June 1994

SAE AS 793A

Total Temperature Measuring Instruments (Turbine Powered Subsonic Aircraft)

SAE AS 8023A

(R) Minimum Performance Standards for Static Electric Power Inverters

SAE AS 803

Igniter, Spark, Aeronautical Engine (Low Tension)

SAE AS 81582/2

CONNECTOR, PLUG, ELECTRIC, BAYONET COUPLING, LANYARD RELEASE, RFI SHIELDED, CRIMP-TYPE CONTACTS, CLASS E-FSC 5935; Amendment 1: 09/2004

SAE AS 81582-A2

Connectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, General Specification For

SAE AS 81659/31

CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (SINGLE INSERT, TYPE II, CLASS 1 (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81659/33

CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, CRIMP CONTACTS, (DUAL INSERT, TYPE II, CLASS 1 (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81659/39

CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (TRIPLE INSERT, TYPE II, CLASS 1 (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81659/62

CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (DUAL INSERT, TYPE III, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81659/64

CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (QUADRUPLE INSERT, TYPE III, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81659/66

CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (SINGLE INSERT, TYPE IV, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81659/67

CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (SINGLE INSERT, TYPE IV, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A, CLINCH NUT MOUNTING)-FSC 5935

SAE AS 81659/70

CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (DUAL INSERT, TYPE IV, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81659/71

Connectors, Electrical, Rectangular, Receptacle, Crimp Contacts, (Single Insert, Type IV, Class 1, (-65°C to +125°C), Series 2, Shell Designator A, Clinch Nut Mounting)-FSC 5935; Amendment 1 - May 2005

SAE AS 81765/3

Insulating Components, Molded, Electrical, Heat Shrinkable Silicone Rubber, Flexible, Crosslinked-FSC 5970

SAE AS 81765/6

Insulating Components, Molded, Electrical, Heat Shrinkable Fluoropolymer, Semi-Rigid, Crosslinked-FSC 5970

SAE AS 81765/7

Insulating Components, Molded, Electrical, Heat Shrinkable Fluoropolymer Composite, Semi-Rigid, Crosslinked-FSC 5970

SAE AS 81822/8

WIRE, ELECTRICAL, SOLDERLESS WRAP, POLYIMIDE JACKET OVER EXTRUDED FLUORINATED ETHYLENE PROPYLENE (FEP) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145

SAE AS 840

Manual for the SAE 17.6 Cubic Inch Spark Plug Rating Engine Including Maintenance and Overhaul

SAE AS 85028/1

CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, PLUG, CRIMP REMOVABLE PIN CONTACTS, CLASS E-FSC 5935; Amendment 1: 09/2004

SAE AS 85028/3

CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, INTERFACIAL SEAL, SIZE 16, CRIMP CONTACTS-FSC 5935

SAE AS 85028/4

CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, SEALING PLUG, SIZE 16, CRIMP REMOVABLE CONTACTS-FSC 5935

SAE AS 85028/6

CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, REPLACEMENT TOOL, WIRE SEAL, SIZE 16, CRIMP REMOVABLE CONTACTS-FSC 5935; Amendment 1: 09/2004

SAE AS 85080/2

INSULATION SLEEVING, ELECTRICAL, NONHEAT SHRINK, SILICONE RUBBER, FLEXIBLE-FSC 5970

SAE AS 85352/1

INFLATOR ASSEMBLY KIT

SAE AS 85352/4

INFLATOR ASSEMBLY DUAL CHUCK STEM GAGE KIT

SAE AS 85376

Stand, Shipboard, Helicopter Maintenance

SAE AS 85485/10

CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, SILVERCOATED HIGH-STRENGTH COPPER ALLOY CONDUCTOR, RADIO FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT-FSC 6145

SAE AS 85485/8

CABLE, ELECTRIC, FILTER LINE, SHIELDED, JACKETED, RADIO FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT-FSC 6145

SAE AS 85848/2

Sleeving, for Identification Marking, Heat Shrinkable, Polyvinylidene Fluoride, Flexible-FSC 5970

SAE AS 889

Calibration Spark Plugs

SAE AS 90A

Propeller Blades, Aluminum Alloy, Shank Dimensions for

SAE AS 91C

Propeller Shaft Ends, Dual Rotation (Propeller Supplied Bearing)-Reaffirmed Noncurrent May 2006

SAE AS 942A

Pressure Altimeter System Minimum Safe Performance Standard

SAE AS 943A

Starter, Pneumatic, Aircraft Engine, General Specification for

SAE AS 9848A

(R) PIN, STRAIGHT, HEADED, .4999 DIAMETER, UNS S41800-FSC 5315

SAE AS4805

Solid State Power Controller, General Standard For

SAE J2747

Hydraulic Pump Airborne Noise Bench Test

SAE JA1005

Software Supportability Program Implementation Guide

SAE MA 2007A

Hose Assembly, Tetrafluoroethylene, Lightweight, 204 Degrees C, 21 000 kPa Hydraulic, Metric

SAE MA 2031B

(R) Fitting, Tee, Thin Wall, Bulkhead on Run, Flareless, Metric

SAE MA 2040B

NUT, FLARELESS, METRIC

SAE MA 2042A

(R) FITTING, ADAPTER, PORT CONNECTION TO FLARELESS, METRIC

SAE MA 2046A

Adapter Flareless Metric to Inch-FSC 4730

SAE MA 2048B

(R) FITTING ASSEMBLY, ELBOW, 45 DEGREES, THIN WALL, RETAINED NUT, FLARELESS, METRIC-FSC 4730

SAE MA 2050B

(R) FITTING ASSEMBLY, ELBOW, 90 DEGREES, THIN WALL, RETAINED NUT, FLARELESS, METRIC-FSC 4730

SAE MA 2061B

(R) FITTING END, WELDED, INTEGRAL OFFSET WELD, LIP, DESIGN STANDARD, METRIC

SAE MA 2064A

(R) Fitting,Sleeve, Flareless Acorn to Integral Weld Ring, 21,000 kPa, Metric

SAE MA 2069A

(R) FITTING, ELBOW, 90°, INTEGRAL WELD RING, 21,000 kPa, METRIC

SAE MA 2080

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204°C, 21,000 KPA, 60-DEG CONE, STRAIGHT TO STRAIGHT, LIGHTWEIGHT, METRIC

SAE MA 2091

HOSE ASSEMBLY, TETRAFLUOROETHYLENE, 21,000 kPa, FLARELESS, 90° TO 90°, METRIC

SAE MA 2101A

HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, STRAIGHT TO STRAIGHT FITTING ENDS, METRIC-FSC 4720

SAE MA 2112B

Adapter, Assembly - Port Connection Ring Locked to 24 Degree Flareless Tube End, Metric-FSC 4730

SAE MA 2120

Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, Straight to Straight

SAE MA 2126B

Hose Assembly, Polytetrafluoroethylene (PTFE), up to 232 DEGREES C and 10 500 kPa Procurement Specification, Metric (ISO/DIS 10502)

SAE MA 2151/2

CLAMP, SADDLE TYPE, CUSHIONED, PHOSPHATE ESTER FLUID RESISTANT, METRIC

SAE MA 2151/3

CLAMP, SADDLE TYPE, CUSHIONED, HIGH TEMPERATURE, METRIC

SAE MA 2151/4

CLAMP, SADDLE TYPE, CUSHIONED, PTFE, METRIC

SAE MA 2152/1

Clamp, Center Mount, Bare Metal, Aluminum, Metric

SAE MA 2154/2

Clamp, Rectangular, 2 Piece, Cushioned, with Wedges, Phosphate Ester Fluid Resistant, Metric

SAE MA 2155/2

Clamp, Rectangular Loop, Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Stainless Steel, Metric

SAE MA 2155/4

Clamp, Rectangular Loop, Cushioned, with Wedge, Phosphate Ester Fluid Resistant, Stainless Steel, Metric

SAE MA 2176A

Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa, Beam Seal, Straight to Straight, Metric

SAE MA 2243

Ferrule, Swaged, Threadless Coupling, Flexible, Fixed Cavity, Self-Bonding, Metric-FSC 4730

SAE MA 2256A

Ferrule, Coupling, Flexible, Variable Cavity, Threaded, Ferrule Tube End, Metric-FSC 4730

SAE MA 2262

Ferrule, Sleeve, Butt Weld, Threadless Coupling, Flexible, Fixed Cavity, Self- Bolding, Metric-FSC 4730

SAE MA 2263

Ferrule, Sleeve, Swaged, Threadless Coupling, Flexible, Fixed Cavity, Self-Bonding, Metric-FSC 4730

SAE MA 2273

FITTING END, BEAM SEAL, EXTERNAL THREAD, DESIGN STANDARD, METRIC

SAE MA 2274

FITTING END, BEAM SEAL, BULKHEAD, EXTERNAL THREAD, DESIGN STANDARD, METRIC

SAE MA 2276

Nut, Beam Seal, Slip-On Metric

SAE MA 2301

Fitting, Adapter, Slip on Nut Beam Seal to Weld, Metric

SAE MA 2303

FITTING, UNION, BEAM SEAL, METRIC

SAE MA 2532

Adapter - Port to Tube, 60 Deg Cone Coupling, AMS 5639, MJ Thread, Metric-FSC 4730

SAE MA 3348

Bolt, Spline Drive Extended Washer Head, PD Shank, Long Thread, AMS 5708, Metric-FSC 5306

SAE MA 3353A

Nut, Self Locking - Spline Drive, Extended Washer, UNS G87400, Cadmium Plate, MJ Thread, Metric-FSC 5310; UNS G87400

SAE MA 3380

STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 7 X 1-FSC 5307

SAE MA 3384

STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 6 X 1-FSC 5307

SAE MA 3390

STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 - 7 X 1-FSC 5307

SAE MA 3426

Nut, Castellated, Hex - UNS S66286, Silver Plate, MJ Thread, Metric-FSC 5310; UNS S66286

SAE MA 3427A

Nut, Castellated, Hex - Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric

SAE MA 3446A

BOLT, MACHINE - TEE HEAD, CHAMFERED CLASSIFICATION: 1210 MPA/730 °C CLOSE TOL SHANK, UNS N07001, METRIC-FSC 5306

SAE MA 3447

Bolt, Machine - Spline Drive HD, Close Tol Full Shank, AMS-5662, Metric-FSC 5306

SAE MA 4284

Areas for Calculating Stress or Load Values for Metric MJ Internally Threaded Fasteners

SAE MA 4510

Fittings, Weld, Fluid Connection, 35,000 kPa, Metric

SAE MA 4510/1

Fittings, Weld to 24 Degree Cone Flareless, Fluid Connection, Metric

SAE MA 4812

Insert - Thin Wall, Metric Short and Long Hole Preparation for-FSC 5340

SAE MA 5405/1

Splice, Fiber Optic, Aerospace Inter-Connect,Graded Index 100/140/172 Cable Size

SAE MA 7211A

Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification for-UNS S32100; FSC 5315; Superseding MAM 7211

SAE MAP 2261

Fluid Couplings for Spacecraft Servicing, Preparation of Specification for, Metric

SAE AIR 1075A

Barometry for Altimeter Calibration

SAE AIR 1081

House Noise-Reduction Measurements for Use in Studies of Aircraft Flyover Noise

SAE AIR 1102A

Transparent Area Washing Systems for Aircraft

SAE AIR 1147A

Electromagnetic Interference on Aircraft From Jet Engine Charging

SAE AIR 1223A

Installation of Liquid Oxygen Systems in Civil Aircraft-REAF Non-current October 2003

SAE AIR 1404

DC Resistivity VS RF Impedance of EMI Gaskets

SAE AIR 1467B

Gas Energy Limited Starting Systems

SAE AIR 1533

Calculation of Basic Emission Parameters for Aircraft Turbine Engines, Procedure for-Errata

SAE AIR 1558A

Interface Protective Devices - Ground Equipment to Aircraft

SAE AIR 1590

Recommended Part Numbering Guidelines for Fluid System Components Inch System of Measurements

SAE AIR 1599A

Ground Equipment Rebuild Program

SAE AIR 1700A

Upper Frequency Measurement Boundary for Evaluation of Shielding Effectiveness in Cylindrical Systems

SAE AIR 1854A

Battery Powered Aircraft Tow Tractors - Factors for Design Consideration

SAE AIR 4013B

Multiplex Data Bus Networks for Mil-Std-1760 Stores

SAE AIR 4061B

(R) Guidelines for Integrating Typical Engine Health Management Functions Within Aircraft Systems

SAE AIR 4090

Igniter Ceramic ARC Resistance Tests

SAE AIR 4152

Reciprocating Engine Pneumatic Starters

SAE AIR 4165

General Requirements for Powered Drive Units in Aircraft Cargo Systems

SAE AIR 4652

Design Factors - Handicapped Passenger Boarding Devices

SAE AIR 4978B

Temporary Methods for Assessing the Load Carrying Capacity of Aircraft Propulsion System Lubricating Oils

SAE AIR 4989

DESIGN CONSIDERATIONS FOR ENCLOSED TURBOSHAFT ENGINE TEST CELLS

SAE AIR 505

Oxygen Equipment, Provisioning and Use in High Altitude (to 40,000 ft.) Commercial Transport Aircraft-REAF Non-current October 2003

SAE AIR 5295

Design Considerations for Enclosed Turboprop Engine Test Cells

SAE AIR 5306

Inlet Airflow Ramps for Gas Turbine Engine Test Cells

SAE AIR 5387

Airport Electrical Power System Harmonics

SAE AIR 5682

Common Launch Acceptability Region Approach Interface Control Document (CLARA ICD)

SAE AIR 784C

Interrelation of Engine Design and Burner Configuration with Selection and Performance of Electrical Ignition Systems for Gas Turbine Engines

SAE AIR 811C

Disposition of Wheels Which Have Been Overheated

SAE AIR 825/2

Effects of Acute Altitude Exposure in Humans: Requirements for Physiological Protection

SAE AIR 902

Determination of Minimum Distance from Ground Observer to Aircraft for Acoustic Tests

SAE AIR 999

Cryogenically Fueled Dynamic Power Systems

SAE ARD 50007

Statement on Requirements for Real-Time Communication Protocols (RTCP)

SAE ARD 50008

Logical Address Allocation and Recommendations

SAE ARD 50011

Modular Avionics Backplane Functional Requirements and Consensus Items (MABFRACI)

SAE ARD 50015

Current Assessment of the Inlet/Engine Temperature Distortion Problem

SAE ARD 50018

Integration of Vertical Flight Aircraft into the National Airspace System

SAE ARD 50027

Human Engineering Issues for Data Link Systems

SAE ARD 50034

Passenger Protective Breathing Equipment

SAE ARD 50062

Human Factors Issues Associated with Terrain Separation Assurance Display Technology

SAE ARP 1206

Aerospace Ground Equipment Criteria for Umbilical Systems Propellant Quick- Disconnects

SAE ARP 1400B

(R) Recommended Practices for Lubricating Oil Filters, General Aviation Reciprocating Engine (Piston Type) Aircraft

SAE ARP 175

Temperature Measurement, Well Insert Type

SAE ARP 1804A

(R) Electric Baggage/Cargo Tractor

SAE ARP 1816B

Charger for Battery Powered Ground Support Equipment

SAE ARP 1987/3

Titles, SAE Subcommittee G-3E Aerospace Tubing Installation Documents, Selection Of

SAE ARP 1987A

Titles, SAE G-3 Committee Document, Selection of

SAE ARP 237A

Propeller Control Clearance - Single Acting System Single Rotation Propeller Shaft Reciprocating Engines

SAE ARP 238A

Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines

SAE ARP 244A

Propeller Control Installation Clearance

SAE ARP 355A

Terminology of Dual, and Coaxial Counter-Rotating Propellers

SAE ARP 367C

AIRPLANE CABIN PRESSURIZATION-Cancelled 3/1984, No Replacement

SAE ARP 375C

Propeller Shaft Ends, Dual Rotation (Propeller Supplied Bearing)

SAE ARP 381A

Hub, Flanged - Spline Type Wood Propeller - #10, #20

SAE ARP 4055

Ground-Plane Microphone Configuration for Propeller-Driven Light- Aircraft Noise Measurement

SAE ARP 4072

Safety Considerations of Carry-On Baggage Relating to the Emergency Evacuation of Transport Category Aircraft-Supersedes SAE AIR 4072

SAE ARP 4102/14B

Full-Format Printer

SAE ARP 4259A

Metabolic Simulator Testing Systems for Aviation Breathing Equipment

SAE ARP 4287

Automatic Presentation of Supplemental Oxygen Masks

SAE ARP 435

Overspeed Warning Instrument (Turbine Powered Subsonic Aircraft)-Reaffirmed Noncurrent July 2001

SAE ARP 4714

External Software Loading of Electronic Engine Controls

SAE ARP 4853B

Design Specification for Towbarless Tow Vehicles

SAE ARP 5140

Design Criteria for Lifts Used to Board Passengers with Mobility Impairments onto Aircraft with Doorsill Heights of 144 in. or Less

SAE ARP 5284A

TLTV - Aircraft NLG Steering and Tractive Force Protection Systems or Alerting Devices - Inspection, Maintenance and Calibration Requirements

SAE ARP 5290

Laser Beam Divergence Measurements Techniques Comparison

SAE ARP 5448/4

Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners

SAE ARP 5533

Stationary Runway Weather Information System (In-Pavement)

SAE ARP 5535

Observers for Laser Safety in the Navigable Airspace

SAE ARP 5539

Rotary Plow With Carrier Vehicle

SAE ARP 5572

Control Measures for Laser Safety in the Navigable Airspace

SAE ARP 5602/3

Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Knowledge Competencies

SAE ARP 5910

Ramp Markings

SAE ARP 5945

Endurance Time Tests for Aircraft Deicing/Anti-icing Fluids SAE Type I

SAE ARP 727

Rate Gyro Assembly Configuration

SAE ARP 890A

Spark Plug Rating Calibration

SAE AS 100004C

Gasket - Type XIII Engine Accessory Drive

SAE AS 100006C

Gasket - Type XVI Engine Accessory Drive

SAE AS 1131C

Air and Air/Surface (Platform) Cargo Pallet Nets

SAE AS 1219A

Aircraft Oxygen Replenishment Coupling for Civil Transport Aircraft (Design Standard)

SAE AS 1303A

Portable Chemical Oxygen

SAE AS 131A

Pads, Oil Inlet and Outlet, Types I, II & III-for Airplane Connections for Aircraft Engines

SAE AS 13471

Navigation, Display Multicolor Microchart/Map Transparencies-FSC 6605; Should Be Used Instead of MIL-STD-1347, Which Was Cancelled on 30 August 1999

SAE AS 14298

Clamp Assembly, Cushioned, Metric-FSC 5340

SAE AS 1516

Helicopter FUEL Economy Evaluation

SAE AS 180A

Propeller Hub-Single Rotation

SAE AS 1864

HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, STRAIGHT TO 45°

SAE AS 1865

Hose Assembly, Rubber, Flareless, Field Attachable Fitting, Straight to 90 Degree

SAE AS 1913C

(R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 45° TO 90°