SAE AS 1097B

SEAL RING, 37° FLARED TUBE FITTING END

SAE AS 21912B

(R) TEE, FLARELESS TUBE WITH BULKHEAD ON RUN

SAE AS 4393B

Nut, Self-Locking, UNS S66286, 1200 Degrees F, 160 000 psi, UNJ Thread-FSC 5310

SAE AS 22759/12

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT

SAE AS 3268A

SLEEVE HALF - REINFORCING, TUBE

SAE AS 5830

Coupling Assembly, Threadless, Flexible, Fixed Cavity, Current Carrying, Self-Bonding, Procurement Specification-FSC 4730

SAE AS 85049/1A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, GROUNDING (WITHOUT STRAIN RELIEF), CATEGORY 1C (FOR MIL-DTL-5015 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS)-FSC 5935

SAE AS 23190/1

Straps, Clamps, and Mounting Hardware, Plastic for Cable Harness Tying and Support Clamp, Loop, Nylon, Adjustable, Wire Support, Type III, Class 1-FSC 5340

SAE AS 4842/1

Fittings, 37 Degrees Flared to Pipe Threaded, Fluid Connection

SAE AS 9581A

(R) Washer, Key - 90 Deg. Locking, CRES, UNS32100

SAE AS 22759/18

Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Light Weight, Tin-Coated Copper Conductor, 600-Volt, 150 Degrees C-FSC 6145

SAE AS 4407

Fitting Assembly, Elbow 90 Degrees, Reducer and Nonreducer, Internal Flare to Flared Tube

SAE AS 7928/7

Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees C Total Conductor Temperature-FSC 5940; Should Be Used Instead of MIL-T-7928/7, Which Was Cancelled on 31 August 1999

SAE AS 85720/1

FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR MALE END-FSC 4730

SAE AS 4861A

(R) Fitting, Bushing, Pipe, Internal and External Thread

SAE AS 1227C

(R) Hose Assembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, Low Pressure, Up to 400 Degrees F, Aircraft

SAE AS 85049/93A

CONNECTOR ACCESSORIES, ELECTRICAL, TERMINATION, SHIELD SPLIT SUPPORT RING, COMPOSITE, NONENVIRONMENTAL, STRAIGHT, CATEGORY 7-FSC 5935

SAE AS 9358A

(R) Nut, Plain, Castellated, Hexagon - UNS S66286, 130 ksi min-FSC 5310; UNS S66286

SAE AS 5190

Fitting, Elbow, 90 Degree, Internal Straight Thread Port-FSC 4730

SAE AS 5951C

Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35,000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems

SAE AS 9201C

NUT, PLAIN, HEXAGON, BOSS CONNECTION, SILVER PLATED, 347 CRES UNS S34700

SAE AS 1712C

(R) COUPLING SUBASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS-FSC 4730

SAE AS 21904B

(R) ELBOW, FLARELESS TUBE, 90°

SAE AS 22759/8

WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT

SAE AS 81531

Marking of Electrical Insulating Materials-FSC 6145; Should be Used for New Design Instead of MIL-M-81531, Which Was Inactivated for New Design on September 30, 1998

SAE AS 3068A

Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251-FSC 5310

SAE AS 7003D

(R) Nadcap Program Requirements

SAE AS 1098B

Fitting End, Flared Tube, for Seal Ring, Standard Dimensions for, Design Standard

SAE AS 22073A

(R) CIRCUIT BREAKER, TRIP-FREE, PUSH-PULL 1/2 THRU 20 AMP, TYPE I

SAE AS 3485

NUT, SELF-LOCKING, 12 POINT, REDUCED HEIGHT, SILVER PLATE, UNS S66286-FSC 5310

SAE AS 1043F

SAFETY WIRE HOLES, HEX, FITTING, LOCATION OF, DESIGN STANDARD-FSC 4720

SAE AS 1503A

Hose, Air Duct, Flexible, Helical Metallic Wire, Supported (Covered) Self Extinguishing

SAE AS 5117

Clip, Spring Retention - Electrical Cable-FSC 5340

SAE AS 81044

Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane- Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy-FSC 5935; Amendment 1 - December 2004

SAE AS 8090

Mobility, Towed Aerospace Ground Equipment, General Requirements for

SAE AS 85049/42A

Connector Accessories, Electrical, Nonenvironmental, Strain Relief, Straight, Category 4A (for MIL-C-5015 Solder Type, V Thread of MS310X Classes A, B, C or K Connectors)-FSC 5935

SAE ARP 5580

Recommended Failure Modes and Effects Analysis (FMEA) Practices for Non-Automobile Applications

SAE AS 1310B

Fastener Torque for Threaded Applications, Definitions of

SAE AS 5969A

FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

SAE AS 81714/63

TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, GROUNDING MODULES, STUD AND FLANGE TYPE MOUNTING, SERIES II-FSC 5940; Amendment 1 - November 2004

SAE AS 22759/41

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED COPPER, 200°C, 600 VOLT

SAE AS 3062C

Bolts, Screws and Studs, Screw Thread Requirements

SAE AS 3220

SLEEVE, FLARED, TUBE FITTING - ALUMINUM-FSC 4730

SAE AS 39029/90

Contact, Electrical Connector, Concentric Twinax, Pin, Size 8-FSC 5935

SAE AS 81714/67

TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK, FEEDBACK TYPE, SERIES II-FSC 5940

SAE AS 1072E

Sleeve, Hose Assembly, Fire Protection

SAE AS 21915B

(R) ADAPTER, STRAIGHT, TUBE TO BOSS

SAE AS 39029/28

Contacts, Electrical Connector, Pin, Crimp Removable, Shielded, Size 12 (for MIL-C-38999 Series I, II, III and IV Connectors)-FSC 5935

SAE AS 4859A

(R) FITTING, COUPLING, PIPE, INTERNAL THREAD-FSC 4730

SAE AS 1895/13C

Flange End, Female, Type I Standard Profile Design Standard

SAE AS 39029/32A

(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 1, MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS)

SAE AS 85049/25

Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shield Termination, Category 3A (for MIL-C-5015 Crimp, MIL-C-26482 Series 2, MIL-C-81703 Series 3, and MIL-C-83723 Series III Connectors)-FSC 5935

SAE AS 81936/1A

BEARING, PLAIN, SELF-ALIGNING, CU-BE BALL, CRES RACE, (WITH GROOVED RACE) -65 °F TO +350 °F-FSC 3120

SAE AS 85049/60A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-C-5015 CRIMP, MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3, AND MIL-C-83723 SERIES III CONNECTORS)-FSC 5935

SAE AS 85049/79A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935

SAE AS 9575B

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A

SAE AS 33583

TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR

SAE AS 39029/31A

(R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 1, MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS)

SAE AS 4139A

TEE, SWIVEL ON RUN, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 9559B

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A-FSC 5306

SAE AS 4377C

FITTING END, BULKHEAD, FLARELESS, DESIGN STANDARD

SAE AS 5958A

Fittings, Axially Swaged Tube with Flareless Separable, Fluid System 5080 psi (35,000 kPa), Specification for

SAE AS 85049/36A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3B (FOR MIL-C-27599 SERIES I AND MIL-DTL-38999 SERIES I AND II CONNECTORS)

SAE AS 9360B

NUT, PLAIN, HEXAGON - DRILLED, SILVER PLATED - UNS S66286, 130 KSI MIN

SAE AS 21909B

(R) TEE, BULKHEAD AND UNIVERSAL, FLARELESS TUBE

SAE AS 3481E

NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F

SAE AS 4207A

Fitting End, External Thread, Beam Seal, Design Standard

SAE AS 81935/3A

Locking Devices (for Rod End Bearings)

SAE AS 172236 THRU 172270A

(R) NUT, SPANNER, BEARING RETAINING, AERONAUTICAL, UNS G41400

SAE AS 35769

Gasket, Metallic, Encased, Annular, Copper-FSC 5330

SAE AS 4133A

TEE, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 5368B

(R) ADAPTER ASSEMBLY - PORT CONNECTION RING LOCKED TO FLARED TUBE END, 3000 PSI

SAE ARP 1185B

Flexure Testing of Hydraulic Tubing Joints and Fittings

SAE AS 22759/35

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT

SAE AS 1001F

(R) FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARELESS-FSC 4730

SAE AS 22759/87B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLTS

SAE AS 81044/12

Wire, Electric, Crosslinked Polyalkene Insulated, Tin-Coated Copper, Light Weight, 600-Volt, 150 Degrees C-FSC 6145

SAE AS 85049/8

Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, 90 Degree, Shield Termination, Category 1A (for MIL-C-5015 Crimp, MIL-C-26842 Series 2, MIL-C-81703 Series 3, and MIL-C-83723 Series III Connectors)-FSC 5935

SAE AS 9058B

RING - BACK-UP, BOSS CONNECTION, AMS 3652, AMS 3656, AMS 3660, AMS 3667

SAE AS 9361A

(R) Nut, Plain, Hexagon, Check, UNS S66286, 130 KSI MIN

SAE AS 14154B

Circuit Breaker - Aircraft, Trip-Free, Push-Pull, 3 Phase, 1 Thru 20 Amp, Type 1

SAE AS 85049/9

Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, 90 Degree, Category 1A (for MIL-C-5015 Crimp, MIL-C-26842 Series 2, MIL-C-81703 Series 3, and MIL-C-83723 Series III Connectors)-FSC 5935

SAE AS 9131A

(R) Quality Management Systems - Nonconformance Documentation

SAE AS 27640B

(R) Bearing, Ball, Airframe, Anti-Friction, Heavy Duty

SAE AS 3067B

R) NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, AS7251-FSC 5310;

SAE AS 85421/1

FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE

SAE ARP 1110B

Minimizing Stress Corrosion Cracking in Wrought Forms of Steels and Corrosion Resistant Steels and Alloys

SAE AS 3650

BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, REDUCED SHANK, UNS N07718 - 185 KSI-FSC 5306

SAE AS 4734C

MALE FERRULE, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, BUTT WELDED-FSC 4730

SAE ARP 1234B

Gland Design, Elastomeric O-Ring Seals, Static Axial, Without Back-Up Rings

SAE AS 4138A

ELBOW, 90°, SWIVEL, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 21926A

(R) ELBOW, 90° UNIVERSAL, FLARELESS TUBE, LOW PROFILE

SAE AS 4208A

FITTING END, BULKHEAD, EXTERNAL THREAD, BEAM SEAL, DESIGN STANDARD

SAE AS 7478B

Bolts and Screws, Steel, UNS S66286 Classification: 130 ksi/1200 Degrees F; 1800 Degrees F Solution Heat Treated, Aged After Roll Threaded Procurement Specification for-FSC 5306;

SAE AS 9318A

(R) RIVET, SOLID - 100 DEGREE FLUSH HEAD, MONEL UNS N04400-FSC 5320

SAE AS 24586

Spring, Helical, Extension: for Loads Below 30 Pounds-FSC 5360

SAE AS 31091A

Boots, Heat-Shrinkable, Strain-Relief, Straight-FSC 5970

SAE AS 5132

Fitting End - Hose Connection, Design Standard

SAE AS 9967

Packing, Preformed - AMS 7273,

SAE MA 3330C

Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Dry Film Lubricated

SAE AS 1895/8C

Flange, Male, Butt Weld, Type II Low Profile

SAE AS 1654D

Sleeve, Threadless - Flexible, Fixed Cavity, Self-Bonding

SAE AS 1895/2C

Flange, Male, Seam Weld Type I Standard Profile

SAE AS 91001B

NUT, HEXAGON, DRILLED, BOSS CONNECTION, CRES - UNS S30400

SAE AS 9209A

(R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A-FSC 5306

SAE MA 3453

Washer, Flat, AMS-5525, Metric-FSC 5310

SAE AS 1008F

(R) FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARELESS-FSC 4730

SAE AS 39029/44

Contacts, Electrical Connector, Pin, Crimp Removable, (for Mil-C-5015 Series MS3400 Connectors)-FSC 5935

SAE AS 5643A

IEEE -1394b Interface Requirements for Military and Aerospace Vehicle Applications

SAE AS 85049/41A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, NON-ENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR MIL-DTL-5015 GENERAL DUTY 'A' ENDBELL AND AS85049 ACCESSORIES)

SAE AS 25361A

CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, PUSH-PULL, 50 THRU 100 AMP, TYPE I

SAE AS 27643B

(R) Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Double Row, Heavy Duty

SAE AS 4410

Fitting Assembly, Tee, Reducer and Nonreducer, Internal Flare on Run, to Flared Tube

SAE AS 4660A

Nut, Short Flareless-FSC 4730

SAE AS 1652A

(R) Coupling Assembly, Threadless - Flexible, Fixed Cavity, Self-Bonding-FSC 4730

SAE AS 18280/2A

(R) Sleeves, Internally or Externally Swaged or Welded, 24 Degrees Cone Flareless Fitting, 3000 psi

SAE AS 21911B

(R) TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON RUN

SAE AS 22759/7

WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, MEDIUM WEIGHT, SILVER-COATED CONDUCTOR, 600 VOLT

SAE ARP 1962A

Training and Approval of Heat-Treating Personnel

SAE AS 22759/3

WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, TFE-GLASS-TFE, MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT

SAE AS 39029/91

Contact, Electrical Connector, Concentric Twinax, Socket, Shielded, Size 8-FSC 5935

SAE AS 85049/14A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IVCONNECTORS)-FSC 5935

SAE AIR 1168/1

Thermodynamics of Incompressible and Compressible Fluid Flow

SAE AS 3551

Packing, Preformed - O-Ring Seal AMS 7272-FSC 5330

SAE AS 7475C

Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification

SAE AS 1036G

FITTING, CROSS, STANDARD AND REDUCER, FLARED-FSC 4730

SAE AS 21428C

BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, PRECISION

SAE AS 27648B

(R) Bearing, Ball, Airframe, Anti-Friction, External Self Aligning, Extra Light Duty

SAE AS 34021A

FSC 5935; Should Be Used for New Design Instead of MS3402, Which Was Inactivated for New Design on January 8, 1999-FSC 5935; Should Be Used for New Design Instead of MS3402, Which Was Inactivated for New Design on January 8, 1999

SAE AS 4824B

GASKET, FITTING END, 37° FLARED

SAE AS 4860A

(R) FITTING, NIPPLE, PIPE, EXTERNAL THREAD

SAE AS 85049/21A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)

SAE AS 87132

Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners

SAE AS 9389

Pin, Straight, Headless - AMS 5735, Lock

SAE ARP 4296A

(R) Drawing Interpretation and Standard Machining Practices, Couplings, Fittings and Hose Ends, Fluid Systems

SAE AS 1946 SUP 1

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, up to 1500 psi and 450 Degrees F, Hydraulic and Pneumatic (Supplement 1)

SAE AS 23190/2

Straps, Clamps, Plastic and Metal, and Mounting Hardware, Plastic for Cable Harness Tying and Support Clamp, Loop, Metal, Cushioned, Adjustable, Wire Support, Type V, Class 1-FSC 5975; Should Be Used for New Design Instead of MIL-S-23190/2, Which Was Inactivated for New Design

SAE AS 39029/45

Contacts, Electrical Connectors, Socket, Crimp Removable, (for Mil-C-5015 Series MS3400 Connectors)-FSC 5935

SAE AS 39029/75

Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 12 (for MIL-C-38999 Series I, III, and IV Connectors)-FSC 5935

SAE AS 7251B

Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 Degrees F Use, UNJ Thread Form-FSC 5310

SAE AS 7928/5

Terminals, Lug and Splices, Conductor, Crimp Style, Splice, Electric, (Permanent, Type II, Class 1) for 105 Degrees C Total Conductor Temperature-FSC 5940; Should Be Used Instead of MIL-T-7928/5B, Which Was Cancelled on 31 August 1999

SAE AS 85049/90A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)

SAE AS 9501A

(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A

SAE ARP 5583

Guide to Certification of Aircraft in a High Intensity Radiated Field (HIRF) Environment

SAE ARP 603F

Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies

SAE AS 1791D

WIRE, RETAINER - TUBE COUPLING NUT-FSC 4730

SAE AS 1895/9C

Flange, Female, Butt Weld, Type II Low Profile

SAE AS 25427

Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect-FSC 4730

SAE AS 4568B

(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to Straight-FSC 4720

SAE AS 4843

Fittings, Beaded, Fluid Connection

SAE AS 8049B

Performance Standard for Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft

SAE AS 81714/16

Terminal Junction System, Rack Assembly, Track, Feedback Type, Light Weight, Series I-FSC 5940

SAE AS 9552A

(R) BRACKET, FLAT, CRES UNS S32100-FSC 5340

SAE ARP 490F

(R) Electrohydraulic Servovalves

SAE ARP 4992A

Periodic Test Plan for Processing Solutions

SAE AS 4209B

FITTING END ASSEMBLY, INTERNAL THREAD, RETAINED NUT, BEAM SEAL, DESIGN STANDARD

SAE AS 964C

Flange - Accessory, 5.000 BC Round, Design Standard for

SAE AS 1732D

Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I

SAE AS 21923A

Adapter, Flareless Tube, Bulkhead and Universal to Flared Tube

SAE AS 5551

Fitting Assembly - 24° Cone Flareless per AS5827, 5080 psi, Port Connection Port Preparation, Installation and Removal of AS5550 and AS5865

SAE AS 621C

Hose Assembly, 3000 psi, PTFE, Flareless, Straight to Straight, Heavyweight

SAE MA 4018

Pin, Straight, Headless AMS 5688, Metric-FSC 5315

SAE AS 5952B

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO STRAIGHT-FSC 4720

SAE AS 5960

Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 Degrees F (204 Degrees C), Aircraft Hydraulic Systems

SAE AS 7108B

Nadcap AUDIT CRITERIA FOR CHEMICAL PROCESSING-Supersedes SAE AS 7108/2A

SAE AS 81935/6

BEARING, PLAIN ROD END, SELF-ALIGNING, SELFLUBRICATING, WIDE, EXTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES) -65 TO +325 °F

SAE AS 9555B

SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A-FSC 5305

SAE ARP 4102/7 APPENDIX C

Appendix C Electronic Display Symbology for Engine Displays

SAE AS 15003B

FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, 1/8 PIPE THREADS, STEEL, TYPE III

SAE AS 81936A

(R) Bearings, Plain, Self-Aligning (Cu-Be Ball, CRES Race) General Specification For-FSC 3120

SAE AS 9574A

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS 1734C

Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I

SAE AS 22759/2

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, PTFE AND PTFE-COATED GLASS, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT

SAE AS 25274

Cap, Electrical (Wire End, Crimp Style, Type II, Class 1) for 105 Degrees C Total Conductor Temperature-FSC 5999; Amendment 1 - June 2004

SAE AS 3085

Packing, Preformed - AMS 7280, 'O' Ring

SAE AS 85049/2A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, CATEGORY 1C (FOR MIL-DTL-5015 SOLDER TYPE, V THREAD OF MS310X CLASSES A, B, C OR K CONNECTORS)-FSC 5935

SAE AS 150E

(R) Hose Assembly, Type Classifications of, Basic Performance and Fire Resistance

SAE AS 3218A

RING, RETAINING-SPIRAL, EXTERNAL, LIGHT DUTY, CRES

SAE AS 5502A

Standard Requirements for Aerospace Sealants

SAE AS 81714/5

Terminal Junction System, Rack Assembly, Track Feedback Type, Series I-FSC 5940

SAE AS 85049/20A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, RFI/EMI CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935

SAE AS 9391

CLAMP, LOOP - MULTIPLE TUBE, DETACHABLE CUSHION, AMS 5510-FSC 5340

SAE ARP9013/1

Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods

SAE AS 14227B

(R) LOCK, ROD END, IMPROVED STRENGTH, NAS LUG-FSC 5340

SAE AS 4665A

Fitting, Adapter, Union and Reducer, Short Flareless to Boss-FSC 4730

SAE AS 4854A

(R) FITTING, ELBOW, 90° , PIPE, INTERNAL AND EXTERNAL THREAD

SAE AS 5181

Fitting, Elbow, 90 Degrees, Bulkhead, Flared to Hose-FSC 4730; Supersedes AN838

SAE AS 85049/24

Connector Accessories, Electrical, Backshell, Nonenvironmental, 90 Degrees, Shield Termination, Category 3A (for MIL-C-5015 Crimp, MIL-C-26482 Series 2, MIL-C-81703 Series 3, and MIL-C-83723 Series III Connectors)-FSC 5935

SAE ARP9013/2

Statistical Product Acceptance Requirements Using Attribute or Variable Lot Acceptance Sampling Plans

SAE AS 4857A

(R) Fitting, Tee, Pipe, Internal Thread

SAE AS 5868A

FITTING ASSEMBLY, ADAPTER, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI-FSC 4730

SAE AS 7928/2B

(R) TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 105 °C TOTALCONDUCTOR TEMPERATURE

SAE AS 9104/2

Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs

SAE AS 9582A

(R) Washer, Key - 270 Deg. Locking, CRES, UNS S32100

SAE AS 1709A

Coupling Assembly, Hydraulic Self Sealing, Quick Disconnect-Superseding ARP 1709

SAE AS 22759/4

Wire, Electric, Fluoropolymer-Insulated, TFE-Glass-FEP,Medium Weight, Silver-Coated Copper Conductor, 600-Volt

SAE AS 4875/2

Fittings, Flanged to Beaded, Fluid Connection

SAE AS 5836

FITTING END, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING MALE AND FEMALE DESIGN STANDARD-FSC 4730

SAE AS 81820/3B

BEARING, PLAIN, SELF-ALIGNING, SELFLUBRICATING, LINED BORE, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 °F

SAE AS 9111

Quality Management System Assessment for Maintenance Organizations (Based on ISO 9001:2000)

SAE AS 9486

PIN, STRAIGHT, HEADLESS - AMS 5132, LOCK-FSC 5315

SAE MA 1370

Screw Threads - MJ Profile, Metric

SAE AS 14105A

(R) CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, PUSH PULL, 25 THRU 35 AMPS, TYPE I -55 TO +121 °C

SAE AS 3257A

(R) CLAMP, LOOP-CUSHIONED, CRES, HIGH TEMP., .204 HOLE

SAE AS 3420

Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .375- 24UNJF-3A (Stress Rupture Resistant)-FSC 5306

SAE AS 7452

Bolts and Screws, Steel, Low Alloy Heat Treated, Roll Threaded-FSC 5306; UNS G87400; Supersedes AMS 7452K;

SAE AS 1003E

(R) FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARELESS-FSC 4730

SAE AS 172271 THRU AS 172320

Washer, Key - Single, AMS 6350 (ASG)-FSC 5310

SAE AS 1895/10C

Flange, Male, Butt Weld, Type I Standard Profile

SAE AS 3269A

SLEEVE HALF - REINFORCING, TUBE, SHOULDER

SAE AS 5000A

Fitting, Plug-in Union, Ring Locked, 24 degree Cone, Fluid Connection, 5080 psi, Specification for

SAE AS 81703

Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting-FSC 5935

SAE AS 9359A

(R) NUT, CASTELLATED, HEXAGON, SILVER PLATED, CRES UNS S66286, 130 KSI MIN

SAE AS 122026 THRU AS 122075A

(R) WASHER - LOCK, SPRING, CADMIUM PLATED

SAE AS 1579D

FITTING END, INTEGRAL WELD, LIP, DESIGN STANDARD

SAE AS 1975 SUP 1

Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 Degrees F, Standard Duty, Hydraulic, Aircraft Systems (Supplement 1)

SAE AS 21438A

(R) BEARING, ROLLER, NEEDLE, SINGLE ROW,HEAVY DUTY, TRACK ROLLER, SEALED, TYPE V ANTIFRICTION, INCH-FSC 3110

SAE AS 3568

Screw, Drive, Round Head, Type U AMS 5504 (UNS S41000)-FSC 5305

SAE AS 5355/3

Couplings, Clamp, Grooved, V-Band, 1.75 to 14.25 Flange OD (-65 to 1200 Degrees F)-FSC 5340

SAE AIR 1362B

Aerospace Hydraulic Fluids Physical Properties

SAE ARP 5413A

Certification of Aircraft Electrical/Electronic Systems for the Indirect Effects of Lightning

SAE ARP 699E

High Temperature Pneumatic Duct Systems for Aircraft

SAE AS 15000A

FITTING END, LUBRICATION, HYDRAULIC - DESIGN STANDARD-FSC 4730

SAE AS 1895/23

High Conformance Seal, Type I & II Standard and Low Profile

SAE AS 3069

Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251-FSC 5310

SAE AS 3214

Wire, Safety-Steel, Corrosion and Heat Resistant, AMS 5689

SAE AS 3239B

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A

SAE AS 39029/77

Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 16 (for MIL-C-38999 Series I, III, and IV Connectors)-FSC 5935

SAE AS 5019

NUT, BULKHEAD, BEAM SEAL FITTING

SAE AS 5869A

FITTING ASSEMBLY, UNION, 3 HOLE FLANGE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI-FSC 4730

SAE AS 5972B

FITTING ASSEMBLY, TEE, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

SAE AS 85049/27A-A1

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-38999, SERIES I AND II CONNECTORS)

SAE AS 9363A

(R) Nut, Slotted, Hexagon, Shear - UNS S66286, 130 ksi min-FSC 5310

SAE AS 9482

WASHER, FLAT - STEEL AMS 6437 OR AMS 6485, DIFFUSED NICKEL-CADMIUM PLATED, COUNTERSUNK

SAE AS 117F

(R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, STRAIGHT TO 90 DEGREE, FLARELESS, LIGHTWEIGHT

SAE AS 22759/90B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER, ALLOY, 260 °C, 600 VOLTS-FSC 6145

SAE AS 22759/92B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260°C, 600 VOLTS

SAE AS 25050

Colors, Aeronautical Lights and Lighting Equipment, General Requirements for-FSC 6220; Supersedes MIL-C-25050A(2)

SAE AS 27642B

(R) Bearing, Ball, Airframe, Extra Light Duty-Should Be Used Instead of MS27642G, Which Was Cancelled on 23 July 1998; FSC 3110

SAE AS 3492

Gasket - Type XI Engine Accessory Drive-FSC 5330

SAE AS 4586

Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degrees F, Titanium Fittings, Beam Seal, Straight to Straight

SAE AS 4862

Plug, Pipe, External Thread, Hex Head

SAE AS 81714/2

Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 20, Series I-FSC 5940

SAE AS 85049/55B-A1

Connector Accessories, Electrical, Strain Relief, Non-Environmental, 90°, Self-Locking and Non-Self-Locking, Category 4C (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)

SAE AS 1985C

(R) ADAPTER, ASSEMBLY - PORT CONNECTION RING LOCKED TO FLARED TUBE END-FSC 4730

SAE AS 26574

CIRCUIT BREAKER - TRIP-FREE, PUSH-PULL, 1/2 THRU 20 AMP, TYPE I-FSC 5925; Amendment 1 - November 2004

SAE AS 3303

Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .190-32 UNJF-3A-FSC 5306

SAE AS 9500A

(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS 1582D

(R) Fitting, Adapter, External Thread Flareless to Integral Weld Ring, 3000 psi

SAE AS 27647B

(R) Bearing, Ball, Airframe, Anti-Friction, Extra Wide, Double Row, Intermediate Duty-FSC 3110; Should Be Used Instead of MS27467F, Which Was Cancelled on 23 July 1998

SAE AS 33481

Contact Bushing, Electric, Wire Barrel-FSC 5935

SAE AS 50861

Wire, Electric, Polyvinyl Chloride Insulated, Copper or Copper Alloy-FSC 6145; Amendment 1 - December 2004

SAE AS 5170

FITTING, PLUG, PORT, STRAIGHT THREAD, O-RING SEAL

SAE AS 7482A

Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 130 ksi 1800 Degrees F Solution Heat Treated, Aged Before Roll Threading Procurement Specification-FSC 5307

SAE AS 85421/2A

Fitting End, Standard Dimensions for Bulkhead, Dynamic Beam Seal, Male

SAE AS 9385

PACKING, PREFORMED, AMS 7267, O-RING-FSC 5330

SAE AS 9451B

BOLT, MACHINE - STEEL, DIFFUSED NICKEL- CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A

SAE AS 21004

400 Commonwealth Drive, Warrendale, PA 15096-0001 SHEET 1 OF 3 AS21004 TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1 FOR 175°C TOTAL CONDUCTOR TEMPERATURE-FSC 5940

SAE AS 22759/86B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLTS

SAE AS 5954C

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 90°

SAE MA 1565A

Inserts, Screw Thread, Helical Coil Metric Series Procurement Specification for FSC5340-FSC 5340

SAE ARP 1755B

Effect of Cleaning Agents on Aircraft Engine Materials Stock Loss Test Method

SAE ARP9013/4

Statistical Product Acceptance Requirements Using Continuous Sampling, Skip-Lot Sampling, or Methods for Special Cases

SAE AS 15720B

FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, .250-28 TAPER THREADS, CORROSION RESISTANT STEEL, TYPE VII

SAE AS 4132A

ELBOW, 90°, BULKHEAD, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 5196C

FITTING, ELBOW, 45 DEGREES, FLARED TO PIPE-FSC 4730; Should be used instead of MS20823, which was Cancelled 29 Sept 2000

SAE AS 85049/16A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935

SAE AIR 5005

Aerospace - Commercial Aircraft Hydraulic Systems

SAE ARP 1820B

Chord Method of Evaluating Surface Microstructural Characteristics

SAE ARP 4752A

(R) Aerospace - Design and Installation of Commercial Transport Aircraft Hydraulic Systems

SAE AS 21153C

Bearing, Ball, Rod End, Double Row, Precision, Internal Thread, Self-Aligning, Airframe, Type IV, -65 Degrees to 300 Degrees F-FSC 3110

SAE AS 3094

INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 1.5 DIA NOM LENGTH-FSC 5340

SAE AS 3508

Insert - Thin Wall, Short and Long Hole Preparation for-FSC 5340

SAE AS 5942

Marking of Electrical Insulating Materials

SAE AS 7232

Rivets, Solid and Tubular, Nickel Alloy Corrosion and Heat Resistant 74Ni - 15.5Cr - 8.0Fe Procurement Specification For-FSC 5320; UNS N06600; Supersedes AMS 7232G

SAE AS 7470B

Bolts and Screws, Steel, Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded

SAE ARP9013/3

Statistical Product Acceptance Requirements Using Process Control Methods

SAE AS 5685

Steel, Corrosion Resistant, Safety Wire, 18Cr - 11.5Ni (UNS S30500) Solution Heat Treated, Cold Finished

SAE AS 9492A

(R) BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A-FSC 5306

SAE AS 9880

Washer, Cup, Lock - CRES AMS 5510-FSC 5310

SAE AIR 869A

V-Couplings, Application of

SAE ARP 926B

Fault/Failure Analysis Procedure-Use ARP 4761 for Aircraft Safety Assessment

SAE AS 15004A

FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, NICKEL-COPPER ALLOY, TYPE IV-FSC 4730

SAE AS 22759/81B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLTS

SAE AS 4843/1

Fittings, Beaded to 37 Degrees Flared, Fluid Connection

SAE AS 5974A

(R) FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

SAE AS 85049/82A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935

SAE AS 9724B

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .2500-28 UNJF-3A

SAE AS 22759/91B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLTS

SAE AS 5180

Fitting, Adapter, Bulkhead, Flared to Hose-FSC 4730; Supersedes AN807

SAE AS 85049/26A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NON-ENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3A (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)

SAE AS 85049/84A

(R) Connector Accessories, Electrical, Backshell, 90 Degree, Self-Locking, Shield Band Termination, (RFI/EMI), Shrink Sleeve Accommodation, Category 3B, (For MIL-C-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)

SAE AS 90362

Connector, Receptacle, External Electric Power, Aircraft, 115/200 Volt, 400 Hertz-FSC 5935; Amendment 1: 09/2004

SAE ARP 5415A

User's Manual for Certification of Aircraft Electrical/Electronic Systems for the Indirect Effects of Lightning

SAE AS 1005F

(R) FITTING, TEE, STANDARD AND REDUCER, FLARELESS-FSC 4730

SAE AS 1339 SUP 1

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees F, Lightweight, Hydraulic and Pneumatic (Supplement 1)

SAE AS 3070

Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251

SAE AS 39029/102

Contacts, Electrical Connector, Pin, Crimp Removable, Coaxial, Size 12 (For Mil-C-38999 Series I, II, III and IV Connectors)-FSC 5935

SAE AS 5175

NUT, COUPLING, FLARED-FSC 4730

SAE AS 954E

Wrenches, Hand Twelve Point High Strength, Thin Wall