SAE AS 976

Coupling - Clamp, Groove V-Band, 6.400, 9.400, 11.400 Flange OD

SAE AIR 1168/2

Heat and Mass Transfer and Air-Water Mixtures

SAE AS 126275 THRU AS 126586B

STUD - STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3125 - 18 NS X .3125 - 24 UNF-3A-FSC 5307

SAE AS 1960

Coupling Assembly, V-Band, Sheet Metal Flange, Pneumatic Tube

SAE AS 3216A

Ring, Retaining-Spiral, External, Heavy Duty, CRES-FSC 5365

SAE AS 39029/35

Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-C-28748/4 and MIL-C-28748/14 Connectors)

SAE AS 5197B

FITTING, TEE, FLARED TO PIPE ON SIDE

SAE AS 81936/2A

BEARING, PLAIN, SELF-ALIGNING, CU-BE BALL, CRES RACE, (CHAMFERED RACE) -65 TO +350 °F-FSC 3120

SAE AS 85049/29A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)

SAE AS 3251B

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A

SAE AS 4941A

(R) Aerospace - General Requirements for Commercial Aircraft Hydraulic Components

SAE AS 5127A

Methods for Testing Aerospace Sealants

SAE AS 5193

Fitting, Cross, Internal Straight Thread Port-FSC 4730

SAE AS 7330

Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant Steel Procurement Specification For-FSC 5365; UNS S30200; Supersedes AMS 7330A

SAE AS 81714/17

TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SIZE 22D, SERIES I-FSC 5940

SAE AS 85049/37

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, SPLIT 90°, EMI/RFI SHIELDED TERMINATION, CATEGORY 3B (FOR MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935

SAE AS 85049/96A

Connector Accessories, Electrical, Mounting Device, Flange Type, Category 7, 1/4 Perimeter-FSC 5935; Amendment 3: 06/2006

SAE ARP 1311B

Aircraft Landing Gear

SAE ARP 1796A

(R) Engine Bleed Air Systems for Aircraft

SAE ARP 4404A

Aircraft Electrical Installations

SAE AS 14153B

CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, PUSH-PULL 3 PHASE, 1 THRU 35 AMP, TYPE 1

SAE AS 1895/21A

Installation, Joint, V-Retainer Coupling Assembly

SAE AS 3509A

Cable, Safety, Kit, Nickel Alloy, UNS N06600-UNS N06600; FSC 5340

SAE AS 39029/103

Contacts, Electrical Connector, Socket, Crimp Removable, Coaxial, Size 12 (for Mil-C-38999 Series I, III, and IV Connectors)-FSC 5935

SAE AS 124951 THRU AS 125100

Rivet - 100 Degree Countersunk Head, Corrosion Resistant Steel-FSC 5320

SAE AS 1711B

Coupling, Flexible, Variable Cavity, Threaded Ferrule Type Tube Ends, Envelope Dimensions Design Standard

SAE AS 1737B

FERRULE, COUPLING, RIGID, FIXED CAVITY THREADED, FERRULE TYPE TUBE ENDS

SAE AS 1895/3C

Flange, Female, Seam Weld, Type I Standard Profile

SAE AS 31171A

BOOTS, HEAT-SHRINKABLE, STRAIN-RELIEF, RIGHT ANGLE-FSC 5970

SAE AS 3505A

Insert - Thin Wall, Long Self-Locking 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread-FSC 5340

SAE AS 3574A

BOLT, SHEAR - DOUBLE HEX HEAD, UNS N07718 - 185 ksi-FSC 5306

SAE AS 4108

T-Bolt and Eye Bolt, A-286 Cres, 1000 Degrees F Fatigue Rated

SAE AS 4405

Fitting Assembly, Adapter, Reducer and Nonreducer, Internal Flare to Flared Tube

SAE AS 81765/1

Insulating Components, Molded, Electrical, Heat Shrinkable Polyolefin, Crosslinked Semi-Rigid and Flexible-FSC 5970

SAE AS 85049/43A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, 45 DEGREE, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-C-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935

SAE AS 85049/94A

CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, FULL PERIMETER-Amendment 3 - June 2006

SAE AS 9393

Cushion, Loop Clamp - Multiple, 2-Tube, AMS 3303

SAE AIR 3277

Installation Procedures - Pin/Plug Expansion Type

SAE AIR 4069A

Sealing Integral Fuel Tanks

SAE AS 39029/107

Contacts, Electrical Connector, Pin, Crimp Removable, (for Mil-C-38999 Series I, III and IV and Mil-C-29600 Series A Connectors)-FSC 5935

SAE AS 4221C

FITTING, ELBOW, 90°, BEAM SEAL BULKHEAD

SAE AS 4227A

(R) FITTING ASSEMBLY, ADAPTER, INTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING-FSC 4030

SAE AS 7102A

National Aerospace and Defense Contractors Accreditation Program Requirements for Heat Treating

SAE AS 85049/53A

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, STRAIGHT, CATEGORY 4C (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935

SAE AS 85049/91A-A1

CONNECTOR ACCESSORIES, COMPOSITE, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)

SAE AS 9519B

BOLT, MACHINE - HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

SAE AS 9705

Bolt, Machine - Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .190-32 UNJF-3A-FSC 5306

SAE AS 9966

Packing, Preformed - AMS 7273, Seal

SAE ARP 670B

Terminals, Aircraft Ignition

SAE ARP210

Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)

SAE AS 21230

Bearing, Plain, Self-Aligning, Grooved Outer Ring TFE Lined, Wide-FSC 3120; Should Be Used Instead of MS21230B, Which Was Cancelled on 03 May 1999

SAE AS 4373C

(R) Test Methods for Insulated Electric Wire

SAE AS 4856A

(R) Fitting, Elbow, 90 Degree, Pipe, Internal Thread

SAE AS 5206A

NUT, FLARED, LONG

SAE AS 5356A

(R) Coupling, Fuel Line, Flexible, 125 psi General Specification for-Should Be Used Instead of MIL-C-85061B, Which Was Cancelled on 24 August 1999

SAE AS 5791

FITTING ASSEMBLY, ADAPTER, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC-FSC 4730

SAE AS 81824A

Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Environment Resistant-FSC 5940; Amendment 1 - February 2005; Should Be Used Instead of MIL-S-81824, Which Was Cancelled on 31 August, 1998

SAE AS 85049/78A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935

SAE AS 9491A

(R) BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A-FSC 5306

SAE ARP 1281C

(R) Actuators: Aircraft Flight Controls, Power Operated, Hydraulic, General Specification For

SAE ARP 9134

Supply Chain Risk Management Guideline-Contains Color

SAE AS 1633D

HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, STRAIGHT TO STRAIGHT

SAE AS 1895/5C

Flange, Male, Seam Weld, Type II Low Profile

SAE AS 21608

Ferrule, Shield Terminating, Crimp Style-FSC 5940; Amendment 1 - March 2005; Should Be Used Instead of MIL-F-21608E, Which Was Cancelled on 7 September 1999

SAE AS 5183

Fitting, Adapter, Hose to Straight Pipe-FSC 4730; Supersedes AN840

SAE AS 81820/2B

BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, CHAMFERED RACE, -65 TO +325 °F

SAE AS 81935/5

Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Internally Threaded, -65 Degrees F to +325 Degrees F-FSC 3120

SAE AS 8796

Hose, Air Duct, Flexible, Aircraft

SAE AIR 310A

Fittings, Catalog of Flared, Flareless, Pipe Threaded, Port, Hose, and Other Type Tube Standard Connectors

SAE AS 116F

(R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, STRAIGHT TO 45 DEGREE FLARELESS, LIGHTWEIGHT

SAE AS 1504A

Hose, Air Duct, Flexible, Helical, Nonmetallic Wire, Supported (Exposed), Self Extinguishing

SAE AS 153F

HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO STRAIGHT, FLARED, LIGHTWEIGHT

SAE AS 28889A

VALVE, AIR, HIGH PRESSURE CHARGING, 5000 PSI

SAE AS 3491

Gasket - Type X or XV Engine Accessory Drive-FSC 5330

SAE AS 3493

GASKET - TYPE XII, XIV A AND XIV B ENGINE ACCESSORY DRIVE-FSC 5330

SAE AS 3506A

(R) Insert - Screw Thread, Thin Wall, Self-Locking UNS NO7718, Silver Plated, Class: 185 ksi/1025 Degrees F, Procurement Specification-FSC 5340

SAE AS 39029/11

Contacts, Electrical Connectors, Pin, Crimp Removable, (for Mil-C-81659 Series 2 Connectors)-FSC 5935

SAE AS 4194A

Sheet and Strip Surface Finish Nomenclature

SAE AS 81714/65

TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SERIES II-FSC 5940

SAE AS 85049/76A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935

SAE ARP 600B

(R) Torque Determination, Method of, for Tube or Hose End Fitting Connections, Flared, Flareless, or Miscellaneous Screw Thread Style

SAE AS 1299C

ADAPTER - PORT CONNECTION RING LOCKED TO FLARELESS TUBE END

SAE AS 1576C

Fittings, Welded, Hydraulic, Titanium and Corrosion Resistant Steel, 3000 psi Hydraulic

SAE AS 1895/6C

Flange, Female, Seam Weld, Type II Low Profile

SAE AS 22759/19

Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Light Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt, 150 Degrees C-FSC 6145

SAE AS 27488

PLUG, END SEAL, ELECTRICAL CONNECTOR-FSC 5935

SAE AS 3261

Nut, Self-Locking, Clip, Floating, AMS 7251-

SAE AS 4897

Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 Degrees F and Fireproof, Procurement Specification for

SAE AS 7253B

Nuts, Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 Degrees F Procurement Specification-FSC 5310

SAE AIR 1899A

Aerospace Military Aircraft Hydraulic System Characteristics

SAE AS 51997B

Ring, Lock, Serrated-High Strength-FSC 5365; UNS G41300; UNS G41400; UNS G87400; UNS S66286

SAE AS 5828

FITTING END, BULKHEAD, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD-FSC 4730

SAE AS 595C

(R) Aerospace - Civil Type Variable Delivery, Pressure Compensated, Hydraulic Pump

SAE AS 6039C

(R) Bearings, Ball, Rod End, Double Row, Self-Aligning

SAE AS 81714/11

Terminal Junction System, Terminal Junction Blocks, Sectional, Wire In-Line Junctions, Single, Series I-FSC 5940

SAE AS 81714/3

Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 16, Series I-FSC 5940

SAE AS 85049/33A-A1

Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shielded, Termination, Category 7 (For MIL-DTL-38999 Series I and II Connectors)

SAE AS 85049/6

Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, 45 Degree, Shield Termination, Category 1A (for MIL-C-5015 Crimp, MIL-C-26842 Series 2, MIL-C-81703 Series 3, and MIL-C-83723 Series III Connectors)-FSC 5935

SAE AS 85049/69A

CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINKBOOT, CATEGORY 5 (MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935

SAE MA 4019

Pin, Straight, Headless AMS 5732, Metric-FSC 5315

SAE AIR 1168/3

Aerothermodynamic Systems Engineering and Design

SAE AIR 1551A

Torque Tightening Metric Screw Threaded Fasteners

SAE AS 10081

Terminal Shank-Swaging, Dimensions for-FSC 4030; Should Be Used Instead of AND10081(4), Which Was Cancelled on 07 September 1999

SAE AS 1100C

FITTING, UNION, FLARED TUBE BULKHEAD AND UNIVERSAL, FOR SEAL RING

SAE AS 1577B

(R) TUBE END, WELD DESIGN STANDARD

SAE AS 1895/11C

Flange, Female, Butt Weld, Type I Standard Profile

SAE AS 22759/5

Wire, Electrical, Fluoropolymer-Insulated, Abrasion Resistant Extruded PTFE, Silver-Coated Copper Conductor, 600 Volt

SAE AS 24461B

Bearing, Roller, Needle, Single Row, Heavy Duty, Type I, Antifriction, Inch-FSC 3110

SAE AS 3075D

GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS 5553

SAE AS 39029/10A

(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES I AND III, AND MIL-DTL-83733 CONNECTORS)

SAE AS 39029/60

Contacts, Electrical Connector, Pin, Crimp Removable, Shielded, Size 8 (for MIL-C-38999 Series I, III, and IV Connectors)-FSC 5935

SAE AS 4307B

FITTING, FLARED TUBE, EXTERNAL STRAIGHT THREAD FOR SEAL RING-FSC 4730

SAE AS 4843/2

Fittings, Beaded to Pipe Threaded, Fluid Connection

SAE AS 4877B

Bolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1200 °F Procurement Specification-FSC 5306

SAE AS 5865

FITTING REDUCER ASSEMBLY, RING LOCKED, ADAPTER, FLARELESS TO PORT, EXTRA FINE THREADS, 5080 PSI-FSC 4730

SAE AS 7114

National Aerospace and Defense Contractors Accreditation Program Requirements for Nondestructive Testing-Superseding AS 7100/1A

SAE AS 81714/1

Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 22, Series I-FSC 5940

SAE AS 9104/3

Requirements for Aerospace Auditor Competency and Training Courses

SAE AS 9841

Key, Woodruff - Chamfered CRES AMS 5640-FSC 5315

SAE AS 21906B

(R) CROSS, FLARELESS TUBE

SAE AS 3419

Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662, .3125- 24UNJF-3A (Stress Rupture Resistant)-FSC 5306

SAE AS 4847A

Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For

SAE AS 5643/1

S400 Copper Media Interface Characteristics Over Extended Distances

SAE AS 5959 REV A

Axially Swaged Fittings, Installation and Inspection Procedure

SAE AS 8860

Landing Gear Structural Requirements as Listed in the MIL-886X Series of Specifications

SAE AS 9319A

(R) RIVET, SOLID - UNIVERSAL HEAD, MONEL UNS N04400-FSC 5320

SAE AS 9432B

BOLT, TEE HEAD, CHAMFERED - CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS 9698B

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .3125-24 UNJF-3A

SAE AS 969B

Drive-Accessory, (127) 5.000 BC Round, QAD, Design Standard For

SAE AS 1171A

Boss-Fluid Connection, Internal Straight Thread, Shallow Tap

SAE AS 15006B

FITTING, LUBRICATION, HYDRAULIC, LEAKPROOF, 1/8 PIPE THREADS, STEEL, TYPE VI

SAE AS 39029/34

Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-C-28748/3 and MIL-C-28748/13 Connectors)

SAE AS 4060

Tube Fitting Swaged Joint, Roller Expander Manual Process, Requirements for

SAE AS 4383A

Fitting Assembly, Reducer Ring Locked Port Connection to Beam Seal 5000 psi /8/-FSC 4730

SAE AS 4735A

(R) Female Ferrule, Threadless - Flexible, Fixed Cavity, Self-Bonding, Swaged-FSC 4730

SAE AS 49011

Rod End - Threaded, Aircraft-FSC 5340; Should Be Used Instead of AN490, Which Was Cancelled on 30 June 1999

SAE AS 5184

Fitting, Adapter, Flared to Hose-FSC 4730; Supersedes AN841

SAE AS 5944

Slings, Aircraft, General Specification for-FSC 1730; Should Be Used Instead of MIL-S-5944C, Which Was Cancelled on 1 July 1999

SAE AS 85049/50A-A1

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, CATEGORY 7 (FOR MIL-DTL-24308 CONNECTORS)

SAE AS 9923A

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A

SAE ARP 1247C

General Requirements for Aerospace Ground Support Equipment Motorized and Nonmotorized

SAE ARP 4727A

Gland Design, Computation of Seal Squeeze and Gland Volume

SAE ARP 5376A

Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids

SAE AS 1738B

NUT ASSEMBLY COUPLING, RIGID, FIXED CAVITY, THREADED FERRULE TYPE TUBE ENDS

SAE AS 22759/80B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, LIGHT WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 °C, 600 VOLTS-FSC 6145

SAE AS 27196

Gasket, Rubber, Fluid Resistant, Oils, Synthetic Oils and Fuels, (-65 to + 400 Degrees F), Mold in Groove-FSC 5330

SAE AS 4273A

(R) Fire Testing of Fluid Handling Components for Aircraft Engines and Aircraft Engine Installations

SAE AS 603A

Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies

SAE AS 7108/1A

National Aerospace and Defense Contractors Accreditation Program Requirements for Painting and Dry Film Coatings

SAE AS 81044/9

Wire, Electric, Crosslinked Polyalkene Insulated, Tin-Coated Copper, Medium Weight, 600-Volt, 150 Degrees C-FSC 6145

SAE AS 85052/1

CLAMP, LOOP, TUBE 17-7 PH CRES, 275 °F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT-FSC 5340

SAE AS 9357A

(R) NUT, PLAIN, HEXAGON, SILVER PLATED, UNS S66286 130 KSI MIN

SAE AIR 5926

White Paper to Support Supersession of MIL-S-8879C With AS8879C

SAE AS 1182C

Standard Stock Removal Allowance Aircraft-Quality and Premium Aircraft-Quality Steel Bars and Mechanical Tubing

SAE AS 1543A

Hose, Air Duct, Semiflexible, Sleeve Section Unreinforced, Self Extinguishing, Nomex

SAE AS 21232

Bearing, Plain, Self-Aligning, Groove Outer Ring, TFE Lined, Narrow-FSC 3120; Should Be Used Instead of MS21232A, Which Was Cancelled on 03 May 1999

SAE AS 22759/89B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER, ALLOY, 200 °C, 600 VOLTS

SAE AS 26860

Indicator, Humidity, Plug, Color Change

SAE AS 39029/59

Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 8 (for MIL-C-38999 Series I, III, and IV Connectors)-FSC 5935

SAE AS 39029/87

Contacts, Electrical Connector, Pin, Crimp Removable, Thermocouple (for MIL-C-38999 Series I, II, III, and IV, and MIL-C-24308, and MIL-C-83733)-FSC 5935

SAE AS 4140A

TEE, SWIVEL ON SIDE, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 4326

Nut, Coupling

SAE AS 7207

Spring Pins, Tubular, Slotted Corrosion and Moderate Heat Resistant Steel Procurement Specification for-FSC 5315; UNS S42000

SAE AS 7222A

Aluminum Rivets, UNS A92117 2.5Cu - 0.3Mg (2117-T4) Procurement Specification-FSC 532

SAE AS 81714/12

Terminal Junction System, Terminal Junction Blocks, Sectional, Wire In-Line Junctions, Double, Series I-FSC 5940

SAE AS 85449

Clamp Assembly, Saddle Type, Cushioned, General Specification For

SAE AS 8700

Installation and Test of Electronic Equipment in Aircraft, General Specification for-FSC MISC; Should Be Used Instead of MIL-I-8700, Which Was Cancelled on August 23, 1999

SAE AS 934C

FITTING, ADAPTER, REDUCER/EXPANDER, FLARED TO BOSS

SAE AIR 5359C

Requirements for Certification/Registration of Aerospace Quality Management Systems

SAE ARP 492C

Aircraft Engine Fuel Pump Cavitation Endurance Test

SAE ARP 901A

Bubble-Point Test Method

SAE AS 125701 THRU 125850A

Rivet-Universal Head, Aluminum Alloy

SAE AS 150401 THRU AS 150425

Nut-Hex, Check-FSC 5310

SAE AS 3570

Packing, Preformed - O-Ring Seal AMS 7274-FSC 5330

SAE AS 39029/92

Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-R-6106 and MIL-S-12883/40 and /41 Relay Sockets)-FSC 5935

SAE AS 4141A

CROSS, SWIVEL ON SIDE, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 4411

Fitting Assembly, Tee, Reducer and Nonreducer, Internal Flare on Side to Flared Tube

SAE AS 5860

Retainers (Back-Up Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Static Gland

SAE AS 614B

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400 Degrees F, Heavy Duty, Hydraulic and Pneumatic

SAE AS 7229

Rivets, Steel, Corrosion and Heat Resistant 18Cr-10.5Ni-0.70(Cb + Ta) Solution Heat Treated Procurement Specification For-FSC 5320; UNS S34700; Supersedes AMS 7229F

SAE AS 9014

Americas Aerospace Quality Group (AAQG) Requirements for Aerospace Quality Management System Certification/Registrations Programs

SAE AS 91641A

(R) PIN, STRAIGHT, HEADLESS, OVERSIZE, STEEL, UNS G10950-FSC 5315

SAE AS 9882A

R) NUT, PLAIN, HEXAGON - DRILLED, CADMIUM PLATED - UNS G87400, 125 KSI MIN-FSC 5310

SAE MA 3265

WASHER - FLAT LOAD SPREADING, METRIC, AMS 5525

SAE AIR 1408A

Aerospace Fuel System Specifications and Standards

SAE AIR 1569A

Handling and Installation Practice for Aerospace Hose Assemblies

SAE ARP 982D

Minimizing Stress-Corrosion Cracking in Wrought Titanium Alloy Products

SAE AS 39029/73

Contacts, Electrical Connectors, Socket, Solder, Removable, Shielded, Size 12 (for MIL-C-83723 Series III, MIL-C-26482 Series 2, MIL-C-83733, and DOD-C-83527 Connectors)-FSC 5935

SAE AS 39029/88

Contacts, Electrical Connector, Socket, Crimp Removable, Thermocouple (for MIL-C-38999 Series I, II, III, IV Connectors)-FSC 5935

SAE AS 5161B

Fitting, Bolt, Fluid Passage

SAE AS 7467A

Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated Procurement Specification-FSC 5306

SAE AS 7928/6

Terminals, Lug and Splices, Conductor, Crimp Style, Splice, Electric, (Permanent, Type II, Class 1) for 150 Degrees C Total Conductor Temperature-FSC 5940; Should Be Used Instead of MIL-T-7928/6A, Which Was Cancelled on 31 August 1999; Amendment 1 - September 2004

SAE AS 1010E

(R) FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARELESS-FSC 4730

SAE AS 125251 THRU 125400A

Rivet - 100 Degrees Countersunk Head, Aluminum Alloy

SAE AS 22759/10

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED COPPER CONDUCTOR, 1000 VOLT

SAE AS 3099

Bolt, Machine-Hexagon Head, PD Shank, CRES AMS 5731, .190-32 UNJF-3A-FSC 5306

SAE AS 35061

Connector, Receptacle External Electric Power, Aircraft, 28 Volt DC Operating Power-FSC 5935

SAE AS 39029/113

CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8, MIL-DTL-38999 SERIES I, III, AND IV-FSC 5999

SAE AS 39029/9A

(R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE, (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES I AND III, AND MIL-DTL-83733 CONNECTORS)

SAE AS 4220C

FITTING, ELBOW, 45°, BEAM SEAL BULKHEAD

SAE AS 4309B

FITTING, NIPPLE, FLARED TUBE TO PIPE THREAD, FOR SEAL RING-FSC 4730

SAE AS 4406

Fitting Assembly, Union, Reducer and Nonreducer, Internal Flare

SAE AS 5792A

(R) FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC

SAE AS 5877A

Detailed Specification for Aircraft Pressure Refueling Nozzle

SAE AS 85049/15A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45 DEGREE, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935

SAE AS 9914

Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .190-32 UNJF-3A-FSC 5306

SAE AS 1009F

(R) FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS-FSC 4730

SAE AS 1368B

FITTING, REDUCER-EXTERNAL THREAD FLARED TUBE FOR SEAL RING-FSC 4730

SAE AS 154701 THRU AS 155000

Stud, Stepped, 2 Dia Engagement .250-20 X .190-32-FSC 5307

SAE AS 1960/1A

COUPLING, SHEET METAL, 40° V-BAND, STANDARD LATCH

SAE AS 21152C

Bearing, Ball, Rod End, Double Row, Precision, Hollow Shank, Self-Aligning, Airframe, Type III, -65 Degrees to 300 Degrees F-FSC 3110

SAE AS 21221A

(R) BEARING, ROLLER, ROD END, EXTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE II, -67° TO 350°F, SEALED-FSC 3110

SAE AS 22759/23

WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT

SAE AS 22759/82B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260°C, 600 VOLTS

SAE AS 27198

Seal, Plain, Rubber, (-65 to + 350 Degrees F Fuel Resistant), Mold in Groove-FSC 5330

SAE AS 3245B

(R) BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A

SAE AS 3414

Bolt, Machine - Hexagon Head, PD Shank, AMS 5662, .250-28UNJF-3A (Stress Rupture Resistant)-FSC 5306

SAE AS 4329

Cap Assembly, Pressure Seal Flared Tube Fitting

SAE AS 5953C

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 45°

SAE AS 5986A

FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/

SAE AS 7117

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR SHOT PEENING, PEEN FORMING, GLASS BEAD PEENING

SAE AS 7456

Studs, Steel, Low Alloy Heat Treated, Roll Threaded-; FSC 5307

SAE AS 81790 AMD 2

Connectors, Receptacle, External Electric Power, Aircraft General Specification for

SAE AS 81935/9

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELFLUBRICATING, NARROW, INTERNALLY THREADED, CORROSION RESISTANT (CRES) -65 TO +325 °F

SAE AS 9121A

Stockist Distributors Quality System Questionnaire Associated with AS9120

SAE AS 9349

CLAMP, LOOP, CUSHIONED, JOGGLED, CRES, .204 HOLE-FSC 5340

SAE ARP 1524A

Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding

SAE ARP 5150

Safety Assessment of Transport Airplanes in Commercial Service

SAE AS 1099C

FITTING END, BULKHEAD FLARED TUBE, FOR SEAL RING, STANDARD DIMENSIONS FOR, DESIGN STANDARD

SAE AS 1251C

FITTING, UNION FLARED TUBE, FOR SEAL RING-FSC 4730

SAE AS 125401 THRU AS 125550

Rivet - Universal Head, Corrosion Resistant Steel-FSC 5320

SAE AS 15005B

FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, NICKEL-COPPER ALLOY, TYPE V

SAE AS 1651A

(R) Assembled Coupling, Threadless - Flexible, Fixed Cavity, Self-Bonding, Envelope Dimensions-FSC 4730

SAE AS 21233

Bearing, Plain, Self-Aligning, TFE Lined, Narrow-FSC 3120; Should Be Used Instead of MS21233B, Which Was Cancelled 03 May 1999

SAE AS 4320

Fitting End, Straight Thread, Standard Dimensions for, Design Standard

SAE AS 5162A

Fitting, Connector, Multiple Fluid Pressure Line, 90 Degree

SAE AS 7228

Rivets, Steel, Corrosion Resistant 18Cr-9Ni Solution Heat Treated Procurement Specification for-FSC 5320;

SAE AS 7459A

Bolts and Screws, Steel UNS K14675 Tensile Strength 195 ksi Fatigue and Stress-Rupture Rated Procurement Specification-FSC 5306

SAE AS 84C

Splines, Involute (Full Fillet)

SAE AS 91101A

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A-FSC 5306

SAE AS 9218C

BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A-FSC 5305

SAE AS 9364A

(R) Nut, Slotted, Hexagon, Shear - Silver Plated, UNS S66286, 130 ksi min-FSC 5310

SAE AS 9380

Plug, Expansion - AMS 4003

SAE AS 9567B

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .3125-24 UNJF-3A-FSC 5306

SAE MA 1784

Spacers and Washers, Procurement Specification for, Metric-FSC 5310 & 5365

SAE ARP 1070B

Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility

SAE ARP 85E

Air Conditioning Systems For Subsonic Airplanes

SAE AS 150501 THRU AS 150800A

(R) STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A-FSC 5307

SAE AS 1713C

(R) HALF COUPLING SUBASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS-FSC 4730

SAE AS 1715D

(R) WASHER, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS-FSC 4730

SAE AS 3078B

(R) FITTING, INSERT, FLUID CONNECTION, MS33649 BOSS TO RING LOCKED BOSS-FSC 4730

SAE AS 39029/20A

(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-81511 SERIES 3 CONNECTORS)

SAE AS 4130A

Elbow, 45 Degree, Bulkhead, Reduced Body, Flareless-FSC 4730

SAE AS 4658

FITTING END, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD-FSC 4730

SAE AS 4697B

Fitting End, Integral Centered Weld Lip, Design Standard-FSC 4730

SAE AS 622C

Hose Assembly, 3000 psi, PTFE, Flareless, Straight to 45 Degree, Heavyweight

SAE AS 81714/61

TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SERIES II-FSC 5940

SAE AS 85421/4C

FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN, SWIVEL NUT ON BRANCH

SAE AS 896B

Fitting, Nipple, Reducer, Flareless Tube to Pipe, External Thread

SAE AS 92001A

(R) Nut, Hexagon, Drilled, Boss Connection, Aluminum - UNS A92014-FSC 5310; UNS A92014

SAE JA1003

Software Reliability Program Implementation Guide

SAE ARP 1270A

Aircraft Cabin Pressurization Control Criteria

SAE ARP 1967A

Containers, Shipping and Storage, Reusable

SAE ARP 5089

Composite Repair NDT/NDI Handbook

SAE AS 120F

HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARELESS LIGHTWEIGHT

SAE AS 1424 SUP 1A

(R) Hose Assemblies, Metal, Medium Pressure, High Temperature (Supplement 1)

SAE AS 1718D

(R) COUPLING BODY, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS-FSC 4730

SAE AS 172321 THRU AS 172370A

(R) NUT, SPANNER, AERONAUTICAL, UNS G41400

SAE AS 3121

Plug, Expansion - Aluminum, 2024-T4, Long; Std and .010 Oversize Diameters-FSC 5315

SAE AS 39029/101

Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-S-12883/44, MIL-S-12883/45, MIL-S-12883/46, and MIL-R-6106/23 Relay)-FSC 5935

SAE AS 39901A

(R) Bearings, Roller, Needle, Airframe, Antifriction, Inch-FSC 3110; Should Be Used Instead of MIL-B-3990D(3), Which Was Cancelled on 05 April 1999

SAE AS 5198C

FITTING, TEE, FLARED TO PIPE ON RUN-FSC 4730; Should be used instead of MS20826D, which was cancelled on 29 September 2000

SAE AS 7250B

Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 Degrees F Use, UN Thread Form-FSC 5310

SAE AS 7474B

Bolts and Screws, Steel, Corrosion Resistant, UNS S17400 Tensile Strength 140 ksi Procurement Specification-FSC 5306

SAE AS 755D

(R) Aircraft Propulsion System Performance Station Designation and Nomenclature

SAE AS 81819

Bearings, Plain, (Shelf-Aligning, Sleeve and Thrust) Self-Lubricating, High Speed Oscillation General Specification for

SAE ARP 1199B

(R) Selection, Application, and Inspection of Electric Overcurrent Protective Devices

SAE ARP 1401A

Aircraft Fuel System and Component Icing Test

SAE ARP 1834A

Fault/Failure Analysis for Digital Systems and Equipment-Use ARP 4761 for Aircraft Safety Assessment

SAE ARP 5606

Composite Honeycomb NDI Reference Standards

SAE AS 1895/20B

COUPLING, V-RETAINER, DOUBLE LATCH, TYPE II LOW PROFILE

SAE AS 3127

Plug, Expansion - CRES, 416, Short; Std and .010 Oversize Diameters-FSC 5315

SAE AS 3332A

Gasket - Copper, Tube Connection, Plain-FSC 5330

SAE AS 39029/74

Contacts, Electrical Connectors, Pin, Solder, Removable, Shielded, Size 12 (for MIL-C-83723 Series III, MIL-C-26482 Series 2, MIL-C-83733 and DOD-C-83527 Connectors)-FSC 5935

SAE AS 4570B

(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to 90 Degrees-FSC 4720

SAE AS 5282

Tool Steel Ring for Magnetic Particle Inspection

SAE AS 8034A

(R) Minimum Performance Standard for Airborne Multipurpose Electronic Displays

SAE AS 9956

Packing, Preformed - AMS 3668, Seal

SAE MA 3280B

Insert, Screw Thread, Helical Coil, Metric Series, Free Running, CRES, Dry Film Lubricated

SAE AS 126881 THRU AS 127192

Stud - Straight, Necked, .375-16 X .375-24-FSC 5307

SAE AS 3479D

Nut, Self-Locking, Plate, One Lug, Floating, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F

SAE AS 3613A

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK. COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN

SAE AS 39029/106

Contacts, Electrical Connector, Socket, Crimp Removable, (for Mil-C-38999 Series I, III and IV and Mil-C-29600 Series A Connectors)-FSC 5935; Best Copy Available

SAE AS 39029/84

Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-C-28840 Connectors)-FSC 5935

SAE AS 4212A

Fitting, Union, Reducer, Beam Seal

SAE AS 4680A

Fitting, Union, Reducer, Short Flareless and Flareless to Boss-FSC 4730

SAE AS 5355/2

Couplings, Clamp, Grooved, V-Band, 1.75 to 6.25 Flange OD (-65 to 250 Degrees F)-FSC 5340

SAE AS 5459A

HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, STRAIGHT TO 45 DEGREE

SAE AS 5833

MALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, SWAGED-FSC 4730

SAE AS 681H

Gas Turbine Engine Steady -State and Transient Performance Presentation for Digital Computer Programs