SAE AS 7114/1

Nadcap Requirements for Nondestructive Testing Facility Penetrant Survey-Superseding AS 7100/1A

SAE AS 85049/46A

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, NONMETALLIC, CATEGORY 4C (FOR MIL-C-27599 SERIES I AND MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935

SAE AS 85049/7

Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, 45 Degree, Category 1A (for MIL-C-5015 Crimp, MIL-C-26482 Series 2, MIL-C-81703 Series III Connectors)-FSC 5935

SAE AS 9529A

BOLT, MACHINE - STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1900-32 UNJF-3A

SAE AS 9553A

(R) Nut-Hex, Boss Connection, CRES - UNS S30400, 75 KSI

SAE AS 9715A

BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .2500-28 UNJF-3A

SAE AIR 1168/4

Ice, Rain, Fog, and Frost Protection

SAE AIR 1662A

Minimization of Electrostatic Hazards in Aircraft Fuel Systems

SAE ARP 1233A

Gland Design, Elastomeric O-Ring Seals, Dynamic Radial, 1500 psi Max

SAE ARP 4102

Flight Deck Panels, Controls, and Displays

SAE ARP 5605

Solid Composite Laminate NDI Reference Standards

SAE AS 1013

FITTING END; ATTACHABLE, SWIVEL FEMALE 37 DEGREES FLARED TUBE, FLEXIBLE METAL HOSE - STRAIGHT,45 DEGREES ELBOW AND 90 DEGREES ELBOW STYLES

SAE AS 1505A

Hose, Air Duct, Flexible, Annular Convoluted, Self Extinguishing

SAE AS 21154A

Bearing, Plain, Self-Aligning, Grooved Outer Ring-FSC 3120

SAE AS 24510A

(R) CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, PUSH-PULL, 5 THRU 15 AMP, TYPE I

SAE AS 39029/2

Contacts, Electrical Connectors, Pins, Crimp Removable, (for Mil-C-81659 Series 1 Connectors)-FSC 5935

SAE AS 5200

Port or Fitting End, Internal Taper Pipe Thread, Design Standard-FSC 4730

SAE AS 8905

Fittings and Cargo Rings, Tie-Down, Aircraft Floor-FSC 1670

SAE AS 9217A

(R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL - CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .190-32 UNJF-3A-FSC 5306

SAE AS 9518B

BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A

SAE AS 9568D

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .3750-24 UNJF-3A-FSC 5306

SAE MA 3352

Packing, Preformed - O-Ring Seal, AMS 7276, Metric-FSC 5330

SAE AIR 1168/9

Thermophysical Properties of the Natural Environment, Gases, Liquids, and Solids

SAE AIR 4845

FMECA Process in the Concurrent Engineering (CE) Environment

SAE ARP 4242

Electromagnetic Compatibility Control Requirements Systems

SAE ARP 4462

Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts

SAE AS 1004E

(R) FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARELESS-FSC 4730

SAE AS 1719B

Fitting End, Half- Coupling, Flexible Variable Cavity Threaded, Ferrule Type Design Standard-FSC 4730

SAE AS 18029

COVER ASSEMBLY, ELECTRICAL, FOR MS27212 TERMINAL BOARD ASSEMBLY-FSC 5940

SAE AS 18802

Fuel and Oil Lines, Aircraft, Installation of

SAE AS 22759/84B

(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600-VOLT-FSC 6145

SAE AS 3552A

NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, EXTENDED WRENCH PAD 180 KSI, 1400 °F, UNS N07001

SAE AS 3564B

NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, COUNTERBORED, 160 KSI, 800 Degree F, UNS S66286-FSC 5310

SAE AS 38999/30A

CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, PLUG, LANYARD RELEASE, FAIL-SAFE, TRIPLE START THREADED COUPLING, REMOVABLE CRIMP CONTACTS SOCKETS, SERIES III, METRIC

SAE AS 5975A

FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

SAE AS 81820/4B

BEARING, PLAIN, SELF-ALIGNING, SELFLUBRICATING, LINED BORE, LOW SPEED, NARROW, CHAMFERED RACE, -65 TO +325 degrees F

SAE AS 85049/85A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935

SAE AS 85421/13C

FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, BULKHEAD MALE ENDS

SAE AS 8976

Bearings, Plain, Self-Aligning, All Metal-FSC 3120; Should Be Used Instead of MIL-B-8976(4), Which Was Cancelled on 30 August 1999

SAE AS 9452B

BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A

SAE MA 1568

Nut, Self Locking - UNS S66286, 425 Degrees C & 650 Degrees C, 1100 MPa, MJ Thread, Procurement Specification for, Metric-FSC 5310

SAE AIR 1168/5

Aerothermodynamic Test Instrumentation and Measurement

SAE AIR 1168/6

Characteristics of Equipment Components, Equipment Cooling System Design, and Temperature Control System Design

SAE AIR 3276

Boss - Plug/Pin, Expansion Type Hole Preparation

SAE AIR 737E

(R) Aerospace Hydraulic and Pneumatic Specifications, Standards, Recommended Practices, and Information Reports

SAE ARP 4402

Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure

SAE ARP 4737G

Aircraft Deicing/Anti-icing Methods

SAE ARP 4915A

(R) Disposition of Landing Gear Components Involved in Accidents/Incidents

SAE ARP 5577

Aircraft Lightning Direct Effects Certification

SAE ARP 823E

Minimizing Stress-Corrosion Cracking in Wrought Heat-Treatable Aluminum Alloy Products

SAE AS 136F

HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO STRAIGHT

SAE AS 150426 THRU AS 150450A

(R) NUT - HEX, CHECK-FSC 5310

SAE AS 1591

Hose, Air Duct, Flexible, Polyurethane-Coated Fabric, 1 psi, External Nylon Helix, Self-Extinguishing

SAE AS 22759/42

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT

SAE AS 31971A

(R) GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST

SAE AS 3231A

Rivet - Tubular, Universal, AS 7232-FSC 5320

SAE AS 3435

Spacer, Sleeve - for .190 Inch Bolt, AMS4901 or AMS4921-FSC 5365

SAE AS 39029/12

Contacts, Electrical Connectors, Sockets, Crimp Removable, (for Mil-C-81659 Series 2 Connectors)-FSC 5935

SAE AS 39029/83

Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-C-28840 Connectors)-FSC 5935

SAE AS 4223

Fitting, Union, Bulkhead, Beam Seal

SAE AS 4301B

FITTING, ADAPTER, CONICAL END TO FLARED TUBE REDUCER FOR SEAL RING-FSC 4730

SAE AS 4875/3

Fittings, Straight Thread Port or Flanged to 24 Degree Cone Flareless, Fluid Connection

SAE AS 517A

Adapter 8

SAE AS 604 SUP 1

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees F, Heavyweight, Hydraulic and Pneumatic (Supplement 1)

SAE AS 85449/1

CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FUEL AND PETROLEUM BASED HYDRAULIC FLUID

SAE AS 90328

Cable Assembly External Electric Power, Aircraft 115/200 Volt, 400 Hertz-FSC 6150

SAE AS 91111A

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A-FSC 5306

SAE AIR 1351F

Manufacturers' Identification of Aerospace Electrical and Electronic Wiring Devices and Accessories

SAE AIR 1594B

(R) Plain Bearing Selection for Landing Gear Applications

SAE ARP 24D

(R) Determination of Hydraulic Pressure Drop

SAE AS 155001 THRU AS 155300A

(R) STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A

SAE AS 155E

HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, STRAIGHT TO 90 DEGREES, FLARED, LIGHTWEIGHT

SAE AS 1814C

Terminology for Titanium Microstructures

SAE AS 22759/6

WIRE, ELECTRICAL, FLUOROCARBON-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT

SAE AS 27194

Seal, Plain, Rubber, (-65 to + 160 Degrees F Fuel Resistant), Mold in Groove-FSC 5330

SAE AS 33731

Strip, Mounting, Nut Insulating, for MS27212 Terminal Board-FSC 5970

SAE AS 3511A

Cable, Safety, Kit - Corrosion Resistant Steel, UNS S30400-UNS S30400; FSC 5340

SAE AS 3569

Packing, Preformed - O-Ring Seal AMS 7270-FSC 5330

SAE AS 39029/48

Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-C-22992 Class L Connectors)

SAE AS 4052A

(R) Gland Design: Scraper, Landing Gear, Installation

SAE AS 4700

Short Flareless Fittings, Installation Procedures and Torque for

SAE AS 5227A

Flange, Straight Thread Port, Weld

SAE AS 5528

Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting

SAE AS 5861

Retainers, (Back-Up Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Static Gland-FSC 5330

SAE AS 611D

(R) Hose Assembly and Tubing, Polytetrafluoroethylene, Cleaning Methods for

SAE AS 7001

National Aerospace and Defense Contractors Accreditation Program (NADCAP) Program Description

SAE AS 7252

Nuts, Self-Locking, Steel High Strength, All Metal 450 Degrees F Use, UNJ Thread Form-; FSC 5310

SAE AS 85049/45A

Connector Accessories, Electrical, Strain Relief, Straight, Nonmetallic, Category 4C (for MIL-C-27599 Series I and MIL-C-38999 Series I and II Connectors)-FSC 5935

SAE AS 85049/62

CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935

SAE AS 85049/92A AMD 1

Connector Accessories, Composite, Electrical, Strain Relief, 90°, Self-Locking, Category 4C (For MIL-DTL-38999 Series III and IV Connectors)

SAE AS 9403

RIVET, SOLID - UNIVERSAL HEAD, AMS 5737-FSC 5320

SAE AIR 1419A

Inlet Total-Pressure-Distortion Considerations for Gas-Turbine Engines

SAE ARP 1331B

Chemical Milling Process

SAE ARP 1631A

Manufacturing Sequence for Fabrication of High-Strength Steel Parts 300M or 4340 Modified Low-Alloy Steels 270,000 psi (1860 MPa) Tensile Strength and Higher

SAE ARP 4784A

(R) Definitions and Limits, Metal Material Defects and Surface and Edge Features, Fluid Couplings, Fittings and Hose Ends

SAE AS 3530

Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, UNS S66286 - 160 ksi-FSC 5306

SAE AS 3547

Assembly Nut and Clip, Removable Self-Locking Nut, UNS S66286-UNS S66286; FSC 5310

SAE AS 4228A

(R) FITTING, ADAPTER, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING-FSC 4030

SAE AS 5054A

Areas for Calculating Stress or Load Values for Externally and Internally Threaded Fasteners

SAE AS 5231

Fitting, Plug, Tube End, Flareless-FSC 4730

SAE AS 70991A AMD 1

Terminals: Lug and Splice, Crimp Style, Aluminum, For Aluminum Aircraft Wire

SAE AS 7246

Inserts, Screw Threads, Helical Coil 72Ni-15.5Cr-0.95(Cb+Ta)-2.5Ti-0.70Al-7.0Fe Corrosion and Heat Resistant Alloy Procurement Specification For-FSC 5340; UNS N07750; Supersedes AMS 7246

SAE AS 7460

Bolts and Screws, Titanium Alloy 6Al - 4V Procurement Specification for-FSC 5306; Supersedes AMS 7460D

SAE AS 7468B

Bolts, Cobalt-Chromium-Nickel Alloy UNS R30035, Tensile Strength 260 ksi, Procurement Specification-FSC 5306

SAE AS 85049/138

CONNECTOR ACCESSORIES, ELECTRICAL, CAP, DUST, PLASTIC, CATEGORY 9-FSC 5935

SAE AS 85049/89A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935

SAE AS 85052/3

CLAMP, LOOP, TUBE 17-7 PH CRES, 500 °F-FSC 5340

SAE AS 85731/1

FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF-LOCKING-FSC 5340; Amendment 1: 09/2004

SAE AS 9554B

SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A-FSC 5305

SAE AS 9564A

R) SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .1640-36 UNJF-3A-FSC 5305

SAE AS 9600A

(R) BRACKET, ANGLE 90°, CORROSION AND HEAT RESISTANT STEEL UNS S41000, .190 BOLT-FSC 5340

SAE MAP 3439

O-Ring Groove Design for Packing Preformed, Elastomeric O-Ring Seals, Static, Axial Compression, Metric-FSC 5330

SAE AIR 1168/10

Thermophysical Characteristics of Working Fluids and Heat Transfer Fluids

SAE AIR 1489B

Aerospace Landing Gear Systems Terminology

SAE AIR 4543A

Aerospace Hydraulics and Actuation Lessons Learned

SAE ARP 1942A

(R) Across Hex Corner Dimension for Fluid Fittings and Nuts

SAE AS 1349A

Insert, Screw Thread, Helical Coil, Locking (Low Friction Systems), Performance Standard for

SAE AS 3084

Packing, Preformed - AMS 7280 - Seal

SAE AS 3307

Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .250-28 UNJF-3A-FSC 5306

SAE AS 4214A

(R) Fitting, Cap Assembly, Beam Seal, Hydraulic

SAE AS 4328B

FITTING, UNION, REDUCER, BULKHEAD, FLARED TUBE, FOR SEAL RING-FSC 4730

SAE AS 4408

Fitting Assembly, Elbow 90 Degrees, Reducer and Nonreducer, Internal Flare

SAE AS 4855A

(R) FITTING, ELBOW, 45° , PIPE, INTERNAL AND EXTERNAL THREAD

SAE AS 5692

ARC Fault Circuit Breaker ( AFCB), Aircraft, Trip-Free Single Phase 115 VAC, 400 Hz - Constant Frequency

SAE AS 7974

Cable Assemblies and Attachable Plugs, External Electrical Power, Aircraft, General Specification For-Amendment 1 - October 2004

SAE AS 8028

Powerplant Fire Detection Instruments Thermal & Flame Contact Types (Reciprocating and Turbine Engine Powered Aircraft)

SAE AS 85049/80A

CONNECTOR ACCESSORIES, ELECTRICAL, DUMMY CONTACT, SIZES 12 AND 8, CATEGORY 7 (FOR MIL-DTL-38999 CONNECTORS)-FSC 5935

SAE AS 85049/83A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD, BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)

SAE AS 85421/5C

FITTING, TEE, REDUCER AND NON-REDUCER, BEAM SEAL, 3000/4000 PSI, MALE ON RUN AND, BRANCH, SWIVEL NUT ON RUN

SAE AS 9379

Plug, Expansion - AMS 5510

SAE AS 9584A

(R) Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi Min, .2500-28 UNJF-3A

SAE AIR 1168/7

Aerospace Pressurization System Design

SAE AIR 1602

Starter System Optimization Start Analysis, Turbine Engine - Electric, Battery Power

SAE ARP 1897

Clamp Selection and Installation Guide

SAE ARP 5526A

(R) Aircraft Seat Design Guidance and Clarifications-Contains Color

SAE AS 1731B

Coupling, Rigid, Fixed Cavity, Threaded Ferrule Type Tube Ends, Envelope Dimensions Design Standard

SAE AS 21150C

Bearing, Ball, Rod End, Double Row, Precision, Solid Shank, Self-Aligning, Airframe, Type I, -65 Degrees to 300 Degrees F-FSC 3110

SAE AS 25027

LIGHT ASSEMBLY, COCKPIT, FIXED-FSC 6220

SAE AS 3074C

GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS 5553

SAE AS 33931A

PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, HYDRAULIC, -65 °F TO +275 °F

SAE AS 3565

Washer, Flat, Countersunk UNS S66286-FSC 5310

SAE AS 4222A

Fitting, Union, Beam Seal

SAE AS 4317B

FITTING, REDUCER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING-FSC 4730

SAE AS 4662A

Fitting, Plug, Short Flareless-FSC 4730

SAE AS 4804A

Hose, Air Duct, Flexible, Silicone-Coated Fabric, External Nylon Helix, Low-Noise

SAE AS 4807C

FITTING ASSEMBLY, ELBOW, 90°, BEAM SEAL, RETAINED NUT

SAE AS 4858A

(R) Fitting, Cross, Pipe, Internal Thread

SAE AS 5835

COUPLING BODY, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING-FSC 4730

SAE AS 81824/4

SPLICES, ELECTRIC, PERMANENT, CRIMP STYLE, COPPER, INSULATED, ENVIRONMENT RESISTANT, SPLICE, SHIELD, SOLDER TYPE, INSULATED, CLASS I-FSC 5940

SAE AS 85049/5A

(R) Connector Accessories, Electrical, Backshell, Cable Sealing, Straight, Step-Down, Category 1A (for MIL-C-22992 Connectors, Classes C, J, and R)-FSC 5935

SAE AS 85421/10C

FITTING, ADAPTER, BEAM SEAL, 3000/4000 PSI, MALE TO FLARELESS

SAE AS 9594A

(R) BRACKET, ANGLE, 90 DEGREES, CRES UNS S32100, .190 X .312 BOLT-FSC 5340

SAE AS 9881A

(R) NUT, PLAIN, HEXAGON, CADMIUM PLATED, UNS G87400, 125 KSI MIN-FSC 5310

SAE MA 2010

Packing, Preformed - O-Ring Seal Standard Sizes & Size Codes, Metric-FSC 5330

SAE ARP 9162

Aerospace Operator Self-Verification Programs

SAE AS 20708

Synchros, General Specification for-FSC 5990; Should Be Used Instead of MIL-S-20708, Which Was Cancelled on 15 September 1999

SAE AS 21155A

BEARING, PLAIN, SELF-ALIGNING, CHAMFERED, OUTER RING-FSC 3120

SAE AS 22759/20

WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 1000-VOLT

SAE AS 3071B

R) Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection

SAE AS 3232A

Bolt, Tee Head - AMS 5708, Chamfered, .1900-32 UNJF-3A-FSC 5306

SAE AS 4224C

FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON SIDE

SAE AS 5232

Fitting, Adapter, Reducer, Port to Flareless-FSC 4730

SAE AS 5235A

FITTING, SLEEVE, COUPLING, FLARELESS-FSC 4730

SAE AS 58091/1

Circuit Breaker, Aircraft, Trip-Free Push Pull, Type I, Dual-Saftey, -55 Thru +121 Degrees C-FSC 5925; Should Be Used Instead of MIL-C-5809/1, Which Was Cancelled on 13 September 1999

SAE AS 8043A

Restraint Systems for Civil Aircraft

SAE AS 81935/7

BEARING, PLAIN ROD END, SELF-ALIGNING, SELFLUBRICATING, WIDE, INTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES) -65 TO +325 °F

SAE AS 897B

FITTING, ELBOW, 90°, STANDARD AND REDUCER FLARELESS TUBE TO PIPE, EXTERNAL THREAD

SAE AS 90991B

NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM - UNS A92024

SAE MA 4070

Pins, Procurement Specification for, Metric-FSC 5315

SAE AIR 4844B

Composites and Metal Bonding Glossary

SAE AS 15721A

FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, CORROSION RESISTANT STEEL, TYPE VIII-FSC 4730

SAE AS 1717D

(R) RETAINER, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS-FSC 4730

SAE AS 1895/17A

Flange, Female, Integral, Weld Ring, Type II Low Profile

SAE AS 1896A

Coupling Assembly, Self-Sealing, One Side Only, Hydraulic

SAE AS 22759/45

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LIGHTWEIGHT, NICKEL-COATED COPPER, 200°C, 600 VOLT

SAE AS 28913B

(R) BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE II-FSC 3110; Should Be Used Instead of MS28913D, Which Was Cancelled on 02 September 1998

SAE AS 3128

Pin, Expansion - CRES, 416, Short-FSC 5315

SAE AS 3219A

Ring, Retaining, Spiral, Minimum Distortion, Dimensional and Acceptance Standard for

SAE AS 3553A

Nut, Self-Locking, Double Hexagon, Silver Plated, Counterbored 180 ksi, 1400 °F, UNS N07001

SAE AS 4134A

TEE, BULKHEAD ON RUN, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 4167A

Wrenches; Flare Nut, Crowfoot, 12-Point Nondistorting

SAE AS 4282

Cap Assembly, Protective Closure, Beam Seal Fitting, Low Pressure-FSC 4730

SAE AS 4409

Fitting Assembly, Elbow 45 Degrees, Reducer and Nonreducer, Internal Flare to Flared Tube

SAE AS 4468 SUP 1

Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification (Supplement 1)

SAE AS 4469B

HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO STRAIGHT

SAE AS 4663A

Fitting, Union, Short Flareless-FSC 4730

SAE AS 4681A

Fitting, Union, Reducer/Expander Bulkhead, Flareless and Short Flareless-FSC 4730

SAE AS 4809C

FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON RUN

SAE AS 5160A

Fitting, Bolt, Flared

SAE AS 5185

FITTING, ELBOW, 90°, PIPE TO HOSE-FSC 4730; Supersedes AN842

SAE AS 8952A

Bearings, Roller, Rod End, Antifriction Self-Aligning-FSC 3110; Should Be Used Instead of MIL-B-8952B, Which Was Cancelled on 30 August 1999

SAE AS 9202B

Gasket - Metal O-Ring, .062 Tube X .010 Wall, Cres - UNS S31200-FSC 5330

SAE AS 9464C

(R) PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286-FSC 5315

SAE AS 9503A

(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A

SAE MA 4189

Screw, Machine, 100 Degree CSK, Flat Head, Offset Cruciform Recess, Full Shank, UNS S66286, MJ Thread, Metric-FSC 5306

SAE AIR 1922

System Integration Factors That Affect Hydraulic Pump Life

SAE AIR 797E

(R) Hose Characteristics and Selection Chart

SAE ARP 5107B

Guidelines for Time-Limited-Dispatch (TLD) Analysis for Electronic Engine Control Systems

SAE AS 150801 THRU AS 151100A

(R) STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A-FSC 5307

SAE AS 27644B

(R) Bearing, Ball, Airframe, Anti-Friction, Double Row, Heavy Duty

SAE AS 3472A

Ring, Retaining - Internal, Spiral Wound Heavy and Medium Duty, UNS S66286-UNS S66286; FSC 5365

SAE AS 39029/27

Contacts, Electrical Connector, Socket, Crimp Removable, Sheilded, Size 12 (For MIL-C-38999 Series II Connectors)-FSC 5935

SAE AS 4459A

(R) Fittings, Tube, Fluid System (3000/4000 psig Rated Pressure), Externally Swaged, Specification for

SAE AS 4471B

HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 90°

SAE AS 4873

GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL AND FACE 800 PSI MAXIMUM SERVICE

SAE AS 5003C

FITTING, TEE, BEAM SEAL, BULKHEAD ON RUN

SAE AS 5837

MALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, BUTT WELDED-FSC 4730

SAE AS 7106

National Aerospace and Defense Contractors Accreditation Program Quality Program Requirements

SAE AS 7225

Rivets, Carbon Steel Procurement Specification for-FSC 5320

SAE AS 85049/23

Connector Accessories, Electrical, Backshell, Nonenvironmental, 45 Degrees, Shield Termination, Category 3A (for MIL-C-5015 Crimp, MIL-C-26482 Series 2, MIL-C-81703 Series 3, and MIL-C-83723 Series III Connectors)-FSC 5935

SAE AS 85049/63A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935

SAE AS 85421/14C

FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, MALE TO FEMALE

SAE AS 9676A

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE MA 4872

Paint Stripping of Commercial Aircraft - Evaluation of Materials and Process

SAE AIR 4923

Bolts and Screws, Aerospace Engine - Materials, Procurement Specifications and Properties

SAE ARP 1923A

Qualification and Certification of Etch Inspectors

SAE ARP 743B

Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Manual Particle Count Method

SAE AS 1012

FITTING END; ATTACHABLE, SWIVEL FEMALE 37 DEGREE MACHINED FLARE, FLEXIBLE METAL HOSE - STRAIGHT, 45 DEGREE ELBOW AND 90 DEGREE ELBOW STYLES

SAE AS 1895/18A

Flange, Male, Integral, Weld Ring, Type I Standard Profile

SAE AS 21447A

(R) BEARING, ROLLER, NEEDLE, TRACK ROLLER, CROWN RADIUSED O.D. INTEGRAL STUD, TYPE VII ANTIFRICTION, INCH

SAE AS 21925B

(R) ELBOW, 90 DEGREE UNIVERSAL, FLARELESS TUBE, HIGH PROFILE

SAE AS 3320C

STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .250-20UNJC X .250-28UNJF-FSC 5307

SAE AS 4131A

ELBOW, 90°, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 4444/1

Sleeve, Bite Type, 24° Cone Flareless Fitting

SAE AS 4799A

(R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to Straight Female-FSC 4720

SAE AS 5187

Fitting, Elbow, 45 Degrees, Bulkhead, Hose-FSC 4730; Supersedes AN846

SAE AS 5970A

FITTING ASSEMBLY, ELBOW, 90°, AXIALLY SWAGED, HYDRAULIC, 5080 PSI

SAE AS 685C

Piloted Ring Seal Fluid Connection Bosses

SAE AS 7413

Coupling Assemblies, Quick Disconnect, Automatic Shutoff

SAE AS 7458

Studs, Steel, Low Alloy, Heat Resistant Normalized and Tempered, Roll Threaded 135 000 psi Tensile Strength-; FSC 5307

SAE AS 85049/28

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3B (FOR MIL-C-83733 CONNECTORS)-FSC 5935

SAE AS 85049/57A

(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935

SAE AS 85449/3

CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, HIGH TEMPERATURE

SAE AS 9207A

(R) SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A-FSC 5305

SAE ARP 1515A

Threaded Fastener Protrusion Through Self-Locking Nuts

SAE ARP 1658B

Hose Assemblies, Installed, Visual Inspection Guide For

SAE ARP 4105B

Abbreviations, Acronyms, and Terms for Use on the Flight Deck

SAE ARP 9114

Direct Ship Guidance for Aerospace Companies-Contains Color

SAE AS 138F

HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 90 DEGREE

SAE AS 2094

Test Methods for Tube-Fitting Assemblies

SAE AS 21234

Fitting, Tiedown, Cargo Ring(5,000 LB) and Seat Stud, Type I-FSC 1670

SAE AS 24462A

(R) BEARING, ROLLER, NEEDLE, SINGLE ROW, THIN SHELL, TYPE II, ANTIFRICTION-FSC 3110

SAE AS 24509A

(R) CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, TOGGLE, 5 THRU 15 AMP, TYPE I

SAE AS 3229A

RIVET - TUBULAR, UNIVERSAL, AS7228-FSC 5320

SAE AS 3543

Stud, Locked in, Key Locked, UNS S66286, 140 ksi/1200 Degrees F, Lightweight, Self-Broaching Keys-FSC 5340

SAE AS 4137A

ELBOW, 45°, SWIVEL, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 4461A

Assembly and Soldering Criteria for High Quality/High Reliability Soldered Wire and Cable Termination in Aerospace Vehicles

SAE AS 4678B

Nut, Bulkhead, Short Flareless

SAE AS 5191

Fitting, Elbow, 45 Degrees, Internal Straight Thread Port-FSC 4730

SAE AS 7103A

National Aerospace and Defense Contractors Accreditation Program (NADCAP) Requirements for Accreditation of Pass Through Distributors

SAE AS 7109/1A

(R) Nadcap Requirements for Thermal Spray

SAE AS 7110/1D

Nadcap Requirements for Brazing (Torch and Induction)

SAE AS 85049/4A

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, SET-UP, CATEGORY 1A (FOR MIL-C-22992 CONNECTORS, CLASSES C, J, AND R)-FSC 5935

SAE AS 85052

Clamp, Loop, Cushion, General Specification for

SAE AS 9219B

BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A-FSC 5306

SAE AS 9316A

(R) SCREW, MACHINE - HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .1900-32 UNS-3A-FSC 5305

SAE AS 931B

(R) Fitting, Adapter, Union, Flareless to Boss

SAE AS 9392

Cushion, Loop Clamp - Multiple, 3-Tube, AMS 3303

SAE AS 9463A

(R) Pin, Straight, Headed, .186 Diameter, CRES, UNS S66286

SAE AS 9596A

(R) BRACKET, ANGLE, 90 DEGREES, CADMIUM PLATED, STEEL UNS G41300, .190 BOLT-FSC 5340

SAE AS 962A

Flange - Accessory, 5.000 BC Square, Design Standard for

SAE JA1002

Software Reliability Program Standard

SAE AIR 1388B

Service Damage Limits for Aircraft Hydraulic Tubing

SAE ARP 4048

Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors

SAE AS 121601 THRU AS 121650

Pin, Straight, Headed - .125 Nom.-FSC 5315

SAE AS 1229C

Insert, Screw Thread, Helical Coil, Stud Locking, Performance Standard for

SAE AS 137F

HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 45 DEGREE

SAE AS 1634D

HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, STRAIGHT TO 45°

SAE AS 1736B

WASHER, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS

SAE AS 22759/21

WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 1000-VOLT

SAE AS 27195

Seal, Plain, Rubber, Synthetic Oil Resistant, (-65 to + 275 Degree F), Mold in Groove-FSC 5330

SAE AS 3063B

Bolts, Screws, and Studs, Geometric Control Requirements

SAE AS 3100

Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .250-28 UNJF-3A-FSC 5306

SAE AS 3122

PIN, EXPANSION - ALUMINUM, 2024-T4, LONG

SAE AS 3226

Tube, Tee, Boss - AMS 5646-FSC 4730

SAE AS 3397

Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251-FSC 5310

SAE AS 34001A

Connectors, Receptacle, Electric, Wall Mounting, Front Release, Crimp Contact, AN Type-FSC 5935; Should Be Used for New Design Instead of MS3400, which Was Inactivated for New Design January 8, 1999

SAE AS 4283A

Handles and Attachments for Hand Socket Wrenches

SAE AS 4569C

(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to 45 Degrees-FSC 4720

SAE AS 51007

Gasket, Rubber, Synthetic-FSC 5330

SAE AS 5498

Minimum Operational Performance Specification for Inflight Icing Detection Systems

SAE AS 7110D

Nadcap Requirements for Welding/Brazing

SAE AS 7116/3

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTRICAL DISCHARGE MACHINING (EDM)

SAE AS 7211A

Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification-UNS S32100; FSC 5315

SAE AS 7472

Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded-; FSC 5306; UNS S30200

SAE AS 85049/109B-A1

CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, NON-SELF LOCKING AND SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 (SERIES I & II), AS81703 SERIES III, AND MIL-DTL-26482 SERIES II CONNECTORS)

SAE AS 8584

Brake Systems, Wheel, Aircraft, Design of

SAE AS 9210A

(R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A-FSC 5306

SAE AS 9576B

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A

SAE AS 9750

Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Titanium AMS 4967, .190-32 UNJF-3A-FSC 5306

SAE AS 9924A

(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

SAE MA 4534

Socket Wrenches, Hand (Metric)

SAE MAP 3440

O-Ring Groove Design for Packing Preformed, Elastomeric O-Ring Seals, Static, Radial Squeeze, Metric

SAE ARP 4256A

Design Objectives for Liquid Crystal Displays for Part 25 (Transport) Aircraft

SAE ARP 5381

Minimum Performance Recommendations for Part 23, 27, and 29 Aircraft Wheels, Brakes, and Wheel and Brake Assemblies

SAE AS 1252A

TEE, FLARED TUBE FOR SEAL RING

SAE AS 1895/22B

COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE

SAE AS 1941A

(R) FITTING END, STRAIGHT THREAD, HIGH PRESSURE, BOSS CONNECTION, DESIGN STANDARD

SAE AS 1960/4

Flange End, Design Standard

SAE AS 22759/46

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LIGHTWEIGHT, NICKEL-COATED HIGH-STRENGTH COPPER ALLOY, 200°C, 600 VOLT