|
SAE AS 85421/12C |
FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, MALE TO MALE |
|
SAE AS 85485/12 |
CABLE, ELECTRIC, FILTER LINE, SHIELDED, JACKETED, RADIO FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT-FSC 6145 |
|
SAE AS 91691A |
(R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 KSI MIN .1900-32 UNF-3A |
|
SAE AS 9228 |
Bracket, Angle, 90 Degree .190 Bolt-FSC 5340 |
|
SAE AS 9354 |
Clamp, Loop - Aluminum, .265 Hole |
|
SAE AS 9460 |
RIVET, SOLID - 100° FLUSH HEAD, AMS 7235-FSC 5320 |
|
SAE AS 9844A |
(R) PIN, STRAIGHT, HEADED, .1874 DIAMETER, UNS S41800-FSC 5315 |
|
SAE MA 1937 |
Nut, Hex, Free Running, Procurement Specification for, Metric |
|
SAE MA 3344 |
Nut, Plain Hex - Thin, UNS S66286, MJ Thread, Metric-FSC 5310; UNS S66286 |
|
SAE AIR 2000E |
(R) Aerospace Fluid System Standards, Metric, National and International |
|
SAE AIR 5919 |
Alternatives to Cadmium Plating |
|
SAE ARP 1256C |
(R) Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines |
|
SAE ARP 5256 |
Mixing Resins, Adhesives and Potting Compounds |
|
SAE ARP 780B |
Environmental Systems Schematic Symbols |
|
SAE AS 117041 THRU AS 117080 |
Screw - Oval Fillister Drilled Head, .164-32-FSC 5305 |
|
SAE AS 1369B |
FITTING, PLUG, FLARED TUBE, FOR SEAL RING-FSC 4730 |
|
SAE AS 1553A |
Performance Standard for Tube Support Loop-Cushioned Clamp |
|
SAE AS 21440 |
BEARING, ROLLER, NEEDLE, TRACK ROLLER,INTEGRAL STUD, SEALED, TYPE VIII,ANTIFRICTION, INCH-FSC 3110 |
|
SAE AS 22759/17 |
Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Medium Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt, 150 Degrees C-FSC 6145 |
|
SAE AS 3167 |
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .190-32 UNJF-3A |
|
SAE AS 3410A |
Bolt, Tee Head - AMS 5662, Chamfered, .250-28UNJF-3A (Stress Rupture Resistant)-FSC 5306 |
|
SAE AS 3545 |
Insert, Screw Thread, Self-Locking, Locked in, Key Locked, Heavy-Duty, Self-Broaching Keys, UNS S66286-FSC 5340 |
|
SAE AS 39029/16 |
Contacts, Electrical Connectors, Sockets, Crimp Removable, (for Mil-C-81659 Series 4 Connectors)-FSC 5935 |
|
SAE AS 39029/8 |
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, (for Mil-C-26482 Series 2 and Mil-C-81703 Series 3 Connectors-FSC 5935 |
|
SAE AS 4076 |
Contractile Strain Ratio Testing of Titanium Hydraulic Tubing |
|
SAE AS 4108/3 |
Eye Bolt, A-286, 1000 Degrees F-FSC 5306 |
|
SAE AS 4302 |
Tee Assembly, Flared Tube, Retained Nut on Run, for Seal Ring |
|
SAE AS 4319B |
FITTING, EXPANDER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING-FSC 4730 |
|
SAE AS 4666A |
Fitting, Elbow, 45 Degrees, Bulkhead, Short Flareless-FSC 4730 |
|
SAE AS 4864A |
(R) FITTING, PLUG, PIPE, EXTERNAL THREAD, COUNTERSUNK HEX HEAD |
|
SAE AS 5002C |
FITTING, ELBOW, 90°, BEAM SEAL |
|
SAE AS 5310A |
FITTING END, BULKHEAD, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD |
|
SAE AS 5529 |
SLEEVE, FLARELESS TUBE FITTING, INTERNALLY SWAGED-FSC 4730 |
|
SAE AS 7106/2A |
National Aerospace and Defense Contractors Accreditation Program Requirements for Corrective Action and Disposition System for Nonconforming Material |
|
SAE AS 7473A |
Bolts and Screws Roll Threaded Procurement Specification for-FSC 5306; UNS K00802,UNS K91505,UNS K91456,UNS S32100,UNS S34700 |
|
SAE AS 8006 |
Minimum Performance Standard for Pitot and Pitot-Static Tubes |
|
SAE AS 8017B |
Minimum Performance Standard for Anticollision Light Systems |
|
SAE AS 8055 |
Minimum Performance Standard for Airborne Head Up Display (HUD) |
|
SAE AS 85421/7A |
FITTING ASSEMBLY, CROSS, BEAM SEAL, 3000/4000 PSI, 4 FEMALE ENDS |
|
SAE AS 85449/4 |
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, PTFE |
|
SAE AS 85731 |
Fastener, Positive Locking, Electronic Equipment, General Specification For-FSC 5340; Amendment 1: 09/2004 |
|
SAE AS 8914A |
(R) Bearing, Roller, Self-Aligning, Airframe, Antifriction-FSC 3110; Should Be Used Instead of MIL-B-8914B(3), Which Was Cancelled on 30 August 1999 |
|
SAE AS 9212A |
(R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A |
|
SAE AS 9454B |
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3750-24 UNJF-3A |
|
SAE AS 9806 |
Bolt, Machine - Hexagon Head, PD Shank, AMS 5643, .250-28 UNJF-3A |
|
SAE MA 3445 |
PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC-FSC 5330 |
|
SAE AIR 1168/12 |
Spacecraft Thermal Balance |
|
SAE AIR 1168/8 |
Aircraft Fuel Weight Penalty Due to Air Conditioning |
|
SAE AIR 1277B |
(R) Cooling of Military Avionic Equipment |
|
SAE AIR 4071 |
Lubricants for Oxygen Use |
|
SAE AIR 4094 |
Aircraft Flight Control Systems Descriptions |
|
SAE AIR 4253A |
Description of Actuation Systems for Aircraft with Fly-By-Wire Flight Control Systems |
|
SAE AIR 4275 |
Jet Reference Fluid Study for Fuel Tank Sealants |
|
SAE AIR 64B |
Electrical and Electronic Equipment Cooling in Commercial Transports |
|
SAE AIR 825/1 |
Introduction to Oxygen Equipment for Aircraft |
|
SAE ARD 50055 |
Aircraft Electrical Systems |
|
SAE ARP 1598A |
Landing Gear System Development Plan |
|
SAE ARP 4102/4 |
Flight Deck Alerting System (FAS) |
|
SAE ARP 4107 |
Aerospace Glossary for Human Factors Engineers |
|
SAE ARP 4163 |
Balancing Machines: Tooling Design Criteria |
|
SAE ARP 4945A |
Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting |
|
SAE ARP 4968 |
Installation Standard for Couplings |
|
SAE ARP 5151 |
Safety Assessment of General Aviation Airplanes and Rotorcraft in Commercial Service |
|
SAE ARP 6002 |
Marking; Standard Hose, Aircraft-FSC 4720; Should Be Used Instead of MIL-M-6002A, Which Was Cancelled on 1 November 1999 |
|
SAE ARP 9034 |
A Process Standard for the Storage, Retrieval and Use of Three-Dimensional Type Design Data |
|
SAE AS 1006E |
R) FITTING, CROSS, STANDARD AND REDUCER FLARELESS-FSC 4730 |
|
SAE AS 126587 THRU AS 126652A |
(R) STUD - STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3750 - 16 NS X .3750 - 24 UNF-3A |
|
SAE AS 1366A |
ELBOW, 90°, FLARED TUBE BULKHEAD UNIVERSAL, FOR SEAL RING |
|
SAE AS 1541A |
Hose, Air Duct, Flexible, Helical Convoluted, Metallic Wire Supported (Covered), Self Extinguishing |
|
SAE AS 155301 THRU AS 155600A |
(R) STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A |
|
SAE AS 21441A |
Bearing, Roller, Needle, Track Roller, Integral Heavy Stud, Type IX, Antifriction, Inch-FSC 3110; Should Be Used Instead of MS21441B, Which Was Cancelled on 22 Novmeber 1999 |
|
SAE AS 3230A |
Rivet - Tubular, Countersunk, AS 7232-FSC 5320 |
|
SAE AS 3248B |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A |
|
SAE AS 3319C |
STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .190-24UNJC X .190-32UNJF-FSC 5307 |
|
SAE AS 3563B |
NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, EXTENDED WRENCH PAD, 160 KSI, 800 °F, UNS S66286-FSC 5310 |
|
SAE AS 39029/71 |
Contacts, Electrical Connector, Pin, Removable, Solderless Wrappost Termination (for MIL-C-38999 Series I, II, III and IV, MIL-C-24308, MIL-C-83733, and MIL-C-55302/69 Connectors)-FSC 5935 |
|
SAE AS 4211D |
FITTING, CROSS, BEAM SEAL |
|
SAE AS 4299A |
Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286-FSC 5365 |
|
SAE AS 4304 |
Tee Assembly, Flared Tube, Retained Nut on Side, for Seal Ring |
|
SAE AS 4308B |
FITTING, BUSHING-SCREW THREAD EXPANDER FOR SEAL RING-FSC 4730 |
|
SAE AS 4318A |
FITTING, ADAPTER, FLARED TUBE, .375 BULKHEAD TO BOSS FOR SEAL RING-FSC 4730 |
|
SAE AS 4350 |
Plug, Hex Head |
|
SAE AS 4624B |
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F, 3000 psi Flareless, Titanium Fittings, Including Jump Size, Straight to Straight-FSC 4720 |
|
SAE AS 4684B |
Fitting Assembly, Elbow, 45 Degree, Flareless and Short Flareless, Reducer, Retained Nut |
|
SAE AS 4690B |
(R) FITTING, TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS AND SHORT FLARELESS |
|
SAE AS 4958 |
Performance, Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form-UNS G41300 AND UNS G43400 |
|
SAE AS 4976 |
Insert, Screw Thread, Non-Locking, UNS S66286, Locked In, Key Locked Procurement Specification For-FSC 5340 |
|
SAE AS 5167A |
Fitting, Adapter, Flared, Air Pressure Gage |
|
SAE AS 782 |
Clamp, Half Tube Support |
|
SAE AS 8025A |
Passenger Oxygen Mask |
|
SAE AS 8029 |
Minimum Performance Standard for Fuel and Oil Quantity Indicating System Components |
|
SAE AS 8047 |
Performance Standard for Cabin Crew Portable Protective Breathing Equipment for Use During Aircraft Emergencies |
|
SAE AS 85049/105A |
CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935 |
|
SAE AS 85049/115B |
(R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) |
|
SAE AS 85049/59 |
Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-C-22992 Connectors, Classes C, J, and R)-Amendment 1: 08 2006 |
|
SAE AS 893B |
Fitting, Tee, Standard and Reducer, Flareless Tube to Pipe on Side, External Thread |
|
SAE AS 9283A |
(R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A-FSC 5306 |
|
SAE AS 9453B |
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A |
|
SAE AS 9505A |
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A |
|
SAE AS 9577 |
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, .375-24 UNJF-3A-FSC 5306 |
|
SAE AS 9677A |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A |
|
SAE AS 9783 |
Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .190-32 UNJF-3A-FSC 5306 |
|
SAE MA 1943A |
Nuts, Self-Locking, UNS N07001 730 Degrees C, 1100 MPa, and 1210 MPa Procurement Specification for, Metric-FSC 5310 |
|
SAE MA 2039A |
PLUG, PORT - MJ THREAD, O-RING SEAL, AMS-5640, METRIC-FSC 4730 |
|
SAE MA 3338 |
BOLT, MACHINE-HEX HEAD, PD SHANK, LONG THREAD, AMS 5662, METRIC-FSC 5306 |
|
SAE MA 3375B |
Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric-FSC 5307 |
|
SAE AIR 1168/14 |
Spacecraft Life Support Systems |
|
SAE AIR 1703 |
In-Flight Thrust Determination |
|
SAE AIR 4004 |
Guide for Installation of Electrical Wire and Cable on Aircraft Landing Gear |
|
SAE AIR 4922 |
Primary Flight Control Hydraulic Actuation System Interface Definition |
|
SAE AIR 5278 |
Composite and Bonded Structure Engineers: Training Document |
|
SAE AIR 5372 |
Information on Brake-By-Wire (BBW) Brake Control Systems |
|
SAE AIR 825/12A |
Oxygen System Integration and Performance Precautions |
|
SAE ARP 1843A |
Surface Preparation for Structural Adhesive Bonding Titanium Alloy Parts |
|
SAE ARP 4058A |
(R) Actuators: Mechanical, Geared Rotary, General Specification For |
|
SAE ARP 4101/2 |
Pilot Visibility from the Flight Deck |
|
SAE ARP 4146A |
Coiled Tubing - Titanium Alloy, Hydraulic Applications, Aerospace |
|
SAE ARP 4168A |
Night Vision Goggle (NVG) Compatible Light Sources |
|
SAE ARP 4493 |
Aerospace - Direct Drive Servovalves |
|
SAE AS 1177A |
Nondestructive Inspection Standards for Bolts and Screws |
|
SAE AS 1250A |
ELBOW, 90°, FLARED TUBE FOR SEAL RING |
|
SAE AS 1291A |
Sleeve, Hose Assembly, Chafe Guard, TFE or FEP |
|
SAE AS 1294 |
Sleeve, Hose Assembly, Chafe Guard, Nylon Coil |
|
SAE AS 150201 THRU AS 150300 |
Pin-Lock, Steel-FSC 5315 |
|
SAE AS 21231 |
Bearing, Plain, Self-Aligning, TFE Lined, Wide-FSC 3120; Should Be Used Instead of MS21231B, Which Was Cancelled on 03 May 1999 |
|
SAE AS 22759/28 |
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, SILVER-COATED COPPER CONDUCTOR, 600-VOLT |
|
SAE AS 27649B |
(R) Bearing, Ball, Airframe, Antifriction, Intermediate Duty-FSC 3110 |
|
SAE AS 3095 |
Insert - CRES Helical Coil Fine Thread, Locking (Low Friction Systems) 2 Dia Nom Length-FSC 5340 |
|
SAE AS 3108 |
Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, CRES AMS 5731, .250-28 UNJF-3A |
|
SAE AS 3166 |
UNION, TUBE - CRES AMS 5646, CONICAL END, CONNECTOR |
|
SAE AS 3172 |
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .500-20 UNJF-3A |
|
SAE AS 3228A |
Rivet - Tubular, Countersunk, AS 7228-FSC 5320 |
|
SAE AS 3291 |
NUT, SELF-LOCKING, DOUBLE HEXAGON, AMS 5709-FSC 5310 |
|
SAE AS 3546A |
Insert, Screw Thread, Self-Locking, Locked in, Key Locked, Extra Heavy-Duty, Self-Broaching Keys, UNS S66286 |
|
SAE AS 3566 |
Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form-FSC 5310 |
|
SAE AS 39029/33 |
Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-C-81511 Series 1 and 2 Connectors) |
|
SAE AS 39029/6 |
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded, (For MIL-C-81511 Series 1 and 2 Connectors)-FSC 5935 |
|
SAE AS 39029/78 |
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 16 (for MIL-C-38999 Series II and Mil-C24308 Connectors)-FSC 5935 |
|
SAE AS 4234 |
Fitting, Adapter, Beam Seal, Swivel Nut, External Swage Tube End, Hydraulic, 3000 psi |
|
SAE AS 4347 |
Union Assembly, Double Retained Nut-FSC 4730 |
|
SAE AS 4842/2 |
Fittings, Flareless to Pipe Threaded, Fluid Connection |
|
SAE AS 4891 |
Stud, Locked in, Key Locked, UNS S66286, Classification: 140 ksi Procurement Specification for-FSC 5307 |
|
SAE AS 5419 |
Cable, Thermocouple Extension, Shielded and Unshielded |
|
SAE AS 5506/1 |
SAE Architecture Analysis and Design Language (AADL) Annex Volume 1: Annex A: Graphical AADL Notation, Annex C: AADL Meta-Model and Interchange Formats, Annex D: Language Compliance and Application Program Interface Annex E: Error Model Annex |
|
SAE AS 5864 |
FITTING END, BULKHEAD, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD-FSC 4730 |
|
SAE AS 7110/4D |
Nadcap Requirements for Resistance Welding (Spot, Seam, Projection) |
|
SAE AS 7114/4 |
NADCAP Requirements for Nondestructive Testing Facility Radiography-Superseding AS 7100/1A |
|
SAE AS 81714/7 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 20, Series I-FSC 5940 |
|
SAE AS 8243 |
Anti-Icing and Deicing-Defrosting Fluids-FSC 6850 |
|
SAE AS 85049/126-A1 |
Connector Accessories, Electrical, Strain Relief, 90° Self-Locking and Non-Self-Locking, Category 4C (For MIL-DTL-38999 Series III and IV Connectors) |
|
SAE AS 85049/130A |
(R) CONNECTOR ACCESSORIES, ELECTRICAL GASKETING MATERIAL, CONDUCTIVE/ NON-CONDUCTIVE, FLANGE MOUNT, CATEGORY 7-FSC 5935 |
|
SAE AS 9372B |
GASKET - METAL O-RING, .062 TUBE X .006 WALL, SILVER PLATED, CRES - UNS S32100-FSC 5330 |
|
SAE AS 9466A |
(R) Pin, Straight, Headed, .373 Diameter, Cres, UNS S66286 |
|
SAE AS 9496A |
(R) BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .6250-18 UNJF-3A-FSC 5306 |
|
SAE AS 9551A |
(R) BRACKET, FLAT, STEEL UNS G41300, CADMIUM PLATED-FSC 5340 |
|
SAE AS 9573A |
(R) Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 Ksi Min, .1640-36 UNJF-3A |
|
SAE AS 970B |
Drive-Accessory, (203.2) 8.000 BC Round, QAD, Design Standard for |
|
SAE AS 9784 |
Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .250-28 UNJF-3A-FSC 5306 |
|
SAE AS 9845A |
(R) PIN, STRAIGHT, HEADED, .2499 DIAMETER, UNS S41800-FSC 5315 |
|
SAE MA 2151 |
Clamp Assemblies, Saddle or Omega Style, Two Point Mount, Multiple Shapes, Metric |
|
SAE MA 3399 |
Clamp - Tube Support, Spring Clips and PTFE Cushion Procurement Specification for-FSC 5340 |
|
SAE MAP 1670 |
Studs, Installation Practice for Interference Fit - Metric |
|
SAE MAP 1753A |
Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment |
|
SAE AIR 1936A |
Study of Wrenching Engagement on AS870C Double Hexagon (12 Point) Fasteners |
|
SAE AIR 4093 |
Compendium of Gas Properties |
|
SAE AIR 4766/1 |
Air Quality for Commercial Aircraft Cabin Particulate Contaminants |
|
SAE AIR 5388 |
Unique Wheel and Brake Designs |
|
SAE AIR 5444 |
Investigation of Whisker Formation on Tin Plated Conductors |
|
SAE AIR 825/6 |
On Board Oxygen Generating Systems (Molecular Sieve) |
|
SAE ARP 1111 |
Inspection of Worn Involute Splines |
|
SAE ARP 1330C |
Welding of Structures for Ground Support Equipment |
|
SAE ARP 4024 |
Aircraft/Engine Fuel Pump Net Positive Suction Pressure Performance Test and Evaluation |
|
SAE ARP 4162A |
Balancing Machine Proving Rotors |
|
SAE ARP 4418A |
(R) Procedure for Sampling and Measurement of Engine and APU Generated Contaminants in Bleed Air Supplies from Aircraft Engines |
|
SAE ARP 4553 |
Accumulator, Hydraulic, Cylindrical Aircraft, Self-Displacing |
|
SAE ARP 4967A |
(R) Night Vision Imaging Systems (NVIS) Integrally Illuminated Information Panels |
|
SAE ARP 573D |
Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems |
|
SAE ARP 9005 |
Aerospace Guidance for Non-Deliverable Software |
|
SAE AS 1295 |
SLEEVE, HOSE ASSEMBLY, CHAFE GUARD, NEOPRENE RUBBER |
|
SAE AS 1338 |
Aerospace Metric 60 Degree Screw Thread Profile and Tolerance Classes |
|
SAE AS 150301 THRU AS 150400 |
Pin-Lock, Brass |
|
SAE AS 1508 |
Undercuts for Straight Screw Threads - Metric |
|
SAE AS 1580B |
(R) RING, WELD, 3000 psi, TITANIUM |
|
SAE AS 1583B |
(R) FITTING, TEE, INTEGRAL WELD RING, 3000 psi |
|
SAE AS 158901 THRU AS 159200A |
(R) STUD, STEPPED, NECKED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A |
|
SAE AS 18121 |
Ferrules, Outer, Insulated, Shield Terminating, Type II Two-Piece, Class I, for Shielded Cable-FSC 5940; Should Be Used Instead of MS18121G, Which Was Cancelled on 27 September 1999 |
|
SAE AS 22759/31 |
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT |
|
SAE AS 24464A |
(R) BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE IV, ANTIFRICTION, INCH-FSC 3110 |
|
SAE AS 25337 |
CIRCUIT BREAKER, AIRCRAFT TRIP-FREE TOGGLE, 5-50 AMP-FSC 5925 |
|
SAE AS 3126 |
PIN, EXPANSION - CRES, 416, LONG |
|
SAE AS 3222B |
Cover - Engine Accessory Drive, Square, 5.000 Bolt Circle, AMS 4490-FSC 2995 |
|
SAE AS 3241B |
(R) Bolt, Machine-Double Hexagon Extended Washer Head, PD Shank, CRES, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A |
|
SAE AS 3401 |
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .250-28 UNJF-3A-FSC 5306 |
|
SAE AS 34061 |
Connectors, Plug, Electric, Front Release, Crimp Contact, AN Type-FSC 5935 |
|
SAE AS 3416 |
Bolt, Machine - Hexagon Head, PD Shank, AMS 5662, .375-24UNJF-3A (Stress Rupture Resistant)-FSC 5306 |
|
SAE AS 3483A |
(R) Nut, Self Locking, Hexagon, Regular Height, UNS S66286, Class: 125 ksi/800 Degrees F-UNS S66286; FSC 5310 |
|
SAE AS 3572 |
Insert, Screw Thread, Non-Locking, Locked in, Key Locked, Heavy-Duty, Self-Broaching Keys, UNS S66286-FSC 5340 |
|
SAE AS 39029/55 |
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26500(USAF) AND MIL-C-26518(USAF) CONNECTORS)-FSC 5935 |
|
SAE AS 39029/80 |
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (for MIL-C-28748/10 Connectors)-FSC 5935 |
|
SAE AS 39029/94 |
Contacts, Electrical Connector, Socket, Crimp Removable, (for DOD-C-83527, Connector)-FSC 5935 |
|
SAE AS 4688A |
Fitting, Tee, Reducer, Flareless and Short Flareless-FSC 4730 |
|
SAE AS 5186 |
Fitting, Elbow, 45 Degrees, Pipe to Hose-FSC 4730; Supersedes AN844 |
|
SAE AS 5372 |
Fuse, Current Limiter Type, Aircraft |
|
SAE AS 5422A |
Hose Assembly, Lined Silicone, Heated, Fixed Cavity, 125 psi, Potable Water-FSC 4720 |
|
SAE AS 5506 |
ARCHITECTURE ANALYSIS & DESIGN LANGUAGE (AADL) |
|
SAE AS 5692/2 |
ARC FAULT CIRCUIT BREAKER - AIRCRAFT, TRIP FREE, 1-20 AMP, TYPE I |
|
SAE AS 5793 |
FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC-FSC 4730 |
|
SAE AS 5831 |
ASSEMBLED COUPLING, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, ENVELOPE DIMENSIONS |
|
SAE AS 5878 |
Nut, Self-Locking, Nickel Alloy, UNS N07001, 1400 Degrees F, 180,000 psi, UNJ Thread Procurement Specification |
|
SAE AS 625C |
Hose Assembly, 3000 psi, PTFE, Flareless, 45 Degree to 90 Degree, Heavyweight |
|
SAE AS 628C |
Hose Assembly, 3000 psi,PTFE, Flared, Straight to 45 Degree, Heavyweight |
|
SAE AS 7102/1 |
National Aerospace and Defense Contractors Accreditation Program Requirements for Brazing |
|
SAE AS 7112 |
National Aerospace aand Defense Contractors Accreeditation Program; Requirements for Fluid System Components |
|
SAE AS 7114/3 |
Nadcap Requirements for Nondestructive Testing Facility Ultrasonic Survey-Superseding AS 7100/1A |
|
SAE AS 7325B |
Gasket, Metal O-Ring Corrosion and Heat Resistant Steel Procurement Specification For-FSC 5330; |
|
SAE AS 758B |
Fittings - Installation in Straight Threaded Boss |
|
SAE AS 8010C |
Aviator’s Breathing Oxygen Purity Standard |
|
SAE AS 81714/14 |
TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK, FEEDTHRU TYPE, LIGHT WEIGHT, SERIES I-FSC 5940 |
|
SAE AS 81714/27 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Grounding Modules, Stud Type Mounting, Series I-FSC 5940 |
|
SAE AS 81822/6 |
WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145 |
|
SAE AS 85049/104A |
CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, 45°, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935 |
|
SAE AS 85049/111B |
(R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 (SERIES I & II), AS81703 SERIES III, AND MIL-C-26482 SERIES II CONNECTORS) |
|
SAE AS 85049/114B |
(R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) |
|
SAE AS 9142B |
Gasket - Metal O-Ring, .062 Tube X .006 Wall, Cres - UNS S32100-FSC 5330 |
|
SAE AS 9303A |
(R) STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A-FSC 5307 |
|
SAE AS 9362A |
(R) NUT, PLAIN, HEXAGON, CHECK - UNS S66286, 130 KSI MIN, SILVER PLATED-FSC 5310 |
|
SAE AS 9395 |
Backplate, Retaining Strap AMS 5510 |
|
SAE AS 9397A |
(R) Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 KSI MIN, Chamfered, .1900-32 UNJF-3A |
|
SAE AS 9493A |
(R) BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .4375-20 UNJF-3A-FSC 5306 |
|
SAE AS 9502A |
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A |
|
SAE AS 9522B |
BOLT, MACHINE - HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A |
|
SAE MA 3286B |
(R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, MJ THREAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 900 MPA MIN, METRIC-FSC 5306 |
|
SAE MA 3378C |
Bolts and Screws, UNS N07001 Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled Before Aging, Procurement Specification, Metric-UNS N07001; FSC 5306 |
|
SAE AIR 1191A |
Performance of Low Pressure Ratio Ejectors for Engine Nacelle Cooling |
|
SAE AIR 1390A |
Convenient Location of Oxygen Masks for Both the Crew and Passengers of Aircraft |
|
SAE AIR 1657B |
(R) Handbook of Hydraulic Metric Calculations |
|
SAE AIR 4204 |
Commercial Aircraft Auxiliary Power Unit Installations |
|
SAE AIR 4250A |
(R) Electronic Engine Control Specifications and Standards |
|
SAE AIR 4894 |
Landing Gear Stability |
|
SAE AIR 4938 |
Composite and Bonded Structure Technician/Specialist: Training Document |
|
SAE AIR 5468A |
Ultraviolet (UV) Lasers for Aerospace Wire Marking |
|
SAE AIR 5479A |
(R) Environmentally Compliant Processes for Landing Gear |
|
SAE AIR 5490 |
Carbon Brake Contamination |
|
SAE AIR 5885 |
Landing Gear Common Repairs |
|
SAE AIR 790C |
(R) Considerations on Ice Formation in Aircraft Fuel Systems |
|
SAE AIR 81B |
Hydrocarbon-Based Hydraulic Fluid Properties |
|
SAE ARP 1322A |
Overpressurization Release Devices |
|
SAE ARP 1587B |
Aircraft Gas Turbine Engine Health Management System Guide |
|
SAE ARP 1595A |
Aircraft Nosewheel Steering Systems |
|
SAE ARP 1797A |
Aircraft and Aircraft Engine Fuel Pump Low Lubricity Fluid Endurance Test |
|
SAE ARP 1802A |
Selection and Application of Polytetrafluoroethylene (PTFE or TFE) Backup Rings for Hydraulic and Pneumatic Fluid Power Applications |
|
SAE ARP 2B |
Horsepower Correction Formulae |
|
SAE ARP 4032A |
Human Engineering Considerations in the Application of Color to Electronic Aircraft Displays |
|
SAE ARP 4101/5 |
Aircraft Circuit Breaker and Fuse Arrangement |
|
SAE ARP 4102/6 |
Communications and Navigation Equipment |
|
SAE ARP 4260 |
Photometric and Colorimetric Measurement Procedures for Airborne Flat Panel Displays |
|
SAE ARP 4916 |
Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials |
|
SAE ARP 4991A |
Core Restoration of Thermosetting Composite Components |
|
SAE ARP 5481 |
Recommended Wheel Tie Bolt Preload Procedure |
|
SAE ARP 5596A |
Cargo Shoring Guidelines |
|
SAE ARP 5905 |
Calibration and Acceptance of Icing Wind Tunnels |
|
SAE ARP 813B |
Maintainability Recommendations for Aircraft Wheel and Brake Design |
|
SAE ARP 868C |
Method-Pressure Drop Tests for Fuel System Components |
|
SAE ARP 881E |
(R) Lamps for Aircraft Lighting |
|
SAE ARP 920A |
Design and Installation of Pitot-Static Systems for Transport Aircraft |
|
SAE AS 115401 THRU AS 115450 |
SCREW - FLAT FILLISTER HEAD, .190-32-FSC 5305 |
|
SAE AS 116901 THRU AS 116912 |
Screw - Oval Fillister Head, .112-40-FSC 5305 |
|
SAE AS 123751 THRU AS 123850B |
(R) PIN, COTTER - CRES, UNS S30200, AS7210 |
|
SAE AS 125551 THRU AS 125700 |
Rivet - Universal Head, Mild Steel-FSC 5320 |
|
SAE AS 1584B |
(R) FITTING, ELBOW, 90°, INTEGRAL WELD RING, 3000 psi |
|
SAE AS 21938A |
(R) BOLT, CLUSTER FITTING, SINGLE PORT FLARELESS |
|
SAE AS 21943A |
(R) BODY, CLUSTER FITTING, TWO WAY, 90°, FLARELESS |
|
SAE AS 24651 |
ELBOW, TUBE - 90°, BULKHEAD, FLARELESS TUBE UNIVERSAL TO FLARED TUBE-FSC 4730; Should Be Used Instead of MS24651, Which Was Cancelled on 2 August 1999 |
|
SAE AS 25488 |
CONNECTOR, PLUG, ATTACHABLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, OPERATING POWER-FSC 5935 |
|
SAE AS 28431 |
Aerospace Signaling Torque Wrenches |
|
SAE AS 28915B |
(R) BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW TORQUE TUBE, AIRFRAME, ANTI-FRICTION, SEALED, TYPE IV-FSC 3110 |
|
SAE AS 3093 |
STUD - STRAIGHT, KEY LOCKED, CRES AMS 5731 .375-24 UNJF X .375-24 UNJF |
|
SAE AS 39029/112 |
ELECTRICAL CONNECTOR, CONTACT BUSHING, WIRE BARREL |
|
SAE AS 39029/69 |
Connector Contacts, Electrical Socket, Crimp Removable, for Mil-C-85028 (AS) Connectors-FSC 5935; Amendment 1 - December 2004 |
|
SAE AS 393B |
Airspeed Tubes Electrically Heated |
|
SAE AS 4230C |
FITTING, ELBOW, 45°, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING |
|
SAE AS 4233C |
FITTING, ELBOW, 90°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING |
|
SAE AS 4251 |
Coupling Assemblies, Non-Locking Probe Style, Self-Aligning, Self-Sealing Disconnects |
|
SAE AS 4401 |
SEPARABLE FITTINGS, PERMANENT FITTINGS, TUBING, FLUID SYSTEMS 8000 psi QUALIFICATION TEST STANDARD FOR |
|
SAE AS 462 |
SHAFTS FOR BALL BEARING RETAINING SPANNER NUTS AND KEY WASHERS |
|
SAE AS 4667 |
Elbow Assembly, 45 Degrees, Retained Nut, Short Flareless |
|
SAE AS 4679B |
Washer, Flat, Short Flareless-FSC 4730 |
|
SAE AS 4687C |
Fitting Assembly, Elbow, 90 Degree, Flareless and Short Flareless, Reducer, Retained Nut |
|
SAE AS 4696 |
Fitting, Sleeve, Flareless, Nonreducer and Reducer, Short Acorn to Weld Tube End-FSC 4730 |
|
SAE AS 4792 |
Water Conditioning Agents for Aqueous Magnetic Particle Inspection |
|
SAE AS 4832 |
Gland Design: Nominal 3/8 in Cross Section for Custom Compression Type Seals |
|
SAE AS 5004C |
FITTING, TEE, BEAM SEAL, BULKHEAD ON SIDE |
|
SAE AS 5166A |
Fitting, Tee, Air Pressure Gage |
|
SAE AS 5239 |
Fitting, Adapter, Bulkhead, Flareless to Flared-FSC 4730 |
|
SAE AS 5258 |
Insulating Components, Molded, Electrical, Heat Shrinkable, Connector and Cable Accessory, Sealing Strain Relief, General Specification For |
|
SAE AS 5395 |
Health and Usage Monitoring System Data Interchange Specification |
|
SAE AS 5439 |
Adapter Reducer, Beam Seal - Port Connection, Ring Locked Design, Installation and Removal of |
|
SAE AS 586B |
Wheel and Brake (Sand and Permanent Mold) Castings - Minimum Requirements for Aircraft Applications |
|
SAE AS 6480A |
Tie Down, Cargo, Aircraft, Type C-2 |
|
SAE AS 707B |
Thermal Sensitive Inflation Pressure Release Devices for Tubeless Aircraft Wheels |