|
SAE AS 7112/6 |
National Aerospace and Defense Contractors Accreditation Program Titanium 3Al-2.5V Alloy, Seamless Hydraulic Tubing Manufacturing Requirements |
|
SAE AS 7118/3 |
Nadcap REQUIREMENTS FOR CORE PROCESSING |
|
SAE AS 8003 |
Minimum Performance Standard for Automatic Pressure Altitude Reporting Code Generating Equipment |
|
SAE AS 81714/21 |
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junctions, Integral Diode, Series I-FSC 5940 |
|
SAE AS 81714/24 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Electronic, In-Line Junctions, Double, Integral Diode(s), Series I-FSC 5940 |
|
SAE AS 81714/6 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 22, Series I-FSC 5940 |
|
SAE AS 81714/69 |
TERMINAL JUNCTION SYSTEM, BLOCK REMOVAL TOOLS, SERIES II-FSC 5940 |
|
SAE AS 81822/13 |
WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED ETHYLENE-TETRAFLUOROETHYLENE (ETFE) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145 |
|
SAE AS 85049/64 |
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, SPLIT, STRAIGHT, CATEGORY 4C (MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935 |
|
SAE AS 8712 |
Valve; Air Relief, Low Pressure |
|
SAE AS 9141B |
Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres - UNS S32100-FSC 5330 |
|
SAE AS 9305A |
(R) STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A-FSC 5307 |
|
SAE AS 9353 |
Clamp, Loop - Aluminum, .204 Hole |
|
SAE AS 9465A |
(R) Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286 |
|
SAE MA 2012B |
(R) Port, Internal, Straight Thread, Fitting Connection, Design Standard, Metric |
|
SAE MA 3347 |
Bolt, Machine-Hex Head-Full Shank, Long Thread, AMS 5731 Metric-FSC 5306 |
|
SAE MA 3377A |
Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric-UNS N07718; FSC 5306 |
|
SAE MA 3442 |
Packing, Preformed - O-Ring Seal, AMS 7267, Metric-FSC 5330 |
|
SAE MA 4021 |
Ring, Retaining - Internal, Tapered, Type I, Class 1 AMS 5520, Metric-FSC 5365 |
|
SAE MA 4045 |
WASHER, CUP, LOCK - SPANNER NUT AMS 5646, METRIC |
|
SAE MAP 749B |
AIRCRAFT TURBINE ENGINE FUEL SYSTEM COMPONENT ENDURANCE TEST PROCEDURE (ROOM TEMPERATURE CONTAMINATED FUEL) |
|
SAE AIR 1168/13 |
Spacecraft Equipment Environmental Control |
|
SAE AIR 1539B |
(R) Environmental Control System Contamination |
|
SAE AIR 4015C |
Icing Technology Bibliography |
|
SAE AIR 4465 |
Design and Handling Guide Radio Frequency Absorptive Type Wire and Cables (Filter Line, MIL-C-85485) |
|
SAE AIR 4487 |
Investigation of Silver Plated Conductor Corrosion (Red Plague) |
|
SAE AIR 4498 |
Aus-Bay Quenching of 300M Steel |
|
SAE AIR 4508 |
MIL-STD-1773 Users Handbook |
|
SAE AIR 4713 |
Aerospace - Chlorinated Solvent Contamination of MIL-H-5606/MIL-H-83282 Vehicle Hydraulic Systems |
|
SAE AIR 4762 |
Compilation of Freezing Brake Experience and Suggested Designs and Operating Procedures Required to Prevent Its Occurrence |
|
SAE AIR 5120 |
Engine Monitoring System Reliability and Validity |
|
SAE AIR 5271 |
A Guideline for Application of High-Density Fiber Optic Interconnects to Aerospace Platforms |
|
SAE AIR5925 |
Measurement Uncertainty Applied to Cost-Effective Testing |
|
SAE ARP 1974 |
Clamps, Support, Comparative Fatigue Strengths, Test Method |
|
SAE ARP 4049 |
Cargo Restraint on Aircraft Passenger Seats - Main Passenger Cabin |
|
SAE ARP 4101 |
Flight Deck Layout and Facilities |
|
SAE ARP 4255 |
Electrical Actuation Systems for Aerospace and Other Applications |
|
SAE ARP 4698 |
Guide for Choosing a Minimum Wall Thickness of Tubing for Use With Weld Fittings Coded for a Range of Wall Sizes |
|
SAE ARP 4868 |
Application Programming Interface Requirements for the Presentation of Gas Turbine Engine Performance on Digital Computers |
|
SAE ARP 4912B |
Design Recommendations for Spare Seals in Landing Gear Shock Struts |
|
SAE ARP 4943 |
Ground Support Equipment Hydraulic Systems, Design and Installation, Recommended Practices for |
|
SAE ARP 5088A |
Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration |
|
SAE ARP 5486 |
Air Cargo Pallets - Utilization Guidelines |
|
SAE ARP 5571 |
Gas Turbine Engine Performance Presentation and Nomenclature for Digital Computers Using Object-Oriented Programming |
|
SAE ARP 587B |
Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Soft-Bearing Type for Gas Turbine Rotors |
|
SAE ARP 688A |
Reusable Lock for Spanner Nuts |
|
SAE AS 103A |
Fitting Assembly, Cross, Flareless and Short Flareless, Reducer, Retained Nut |
|
SAE AS 1293 |
Sleeve, Hose Assembly, Chafe Guard, TEE Coil |
|
SAE AS 1561 |
Stud, Locked in - Ring, Straight, Installation and Removal of |
|
SAE AS 158E |
HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARED, LIGHTWEIGHT |
|
SAE AS 22759/15 |
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT |
|
SAE AS 24000 |
Fuse Holder, Block-Type, 1-, 2-, and 3-Pole, 1- to 30-Ampere, Aircraft-FSC 5920; Should Be Used Instead of MS24000F, Which Was Cancelled on 13 September 1999 |
|
SAE AS 24652 |
ELBOW, TUBE - 90°, BULKHEAD, FLARED TUBE, UNIVERSAL TO FLARELESS TUBE-FSC 4730; Should Be Used Instead of MS24652, Which Was Cancelled on 2 August 1999 |
|
SAE AS 3129 |
Plug, Expansion - CRES, 303, Long; Std and .010 Oversize Diameters-FSC 5315 |
|
SAE AS 3176 |
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CL TOL SHANK, AMS 5643, .3125-24, UNJF-3A |
|
SAE AS 3262A |
Nut, Self-Locking, Plate - 2 Lug, Floating, CBored, UNS S66286-FSC 5310; UNS S66286 |
|
SAE AS 3298 |
Cushion - Tube Clamp Support, PTFE, Inch |
|
SAE AS 3413 |
Bolt, Machine - Hexagon Head, PD Shank AMS 5662, .190-32UNJF-3A (Stress Rupture Resistant)-FSC 5306 |
|
SAE AS 3480C |
Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F |
|
SAE AS 39029/109 |
Contacts, Electrical Connector, Pin, Crimp Removable, Socket, Multiple Wires-FSC 5935 |
|
SAE AS 39029/23 |
Contacts, Electrical Connector, Pin, Crimp Removable, Sheilded, (For MIL-C-26482 Series 1 Connectors)-FSC 5935 |
|
SAE AS 405C |
Fuel and Oil Quantity Instruments |
|
SAE AS 4215 |
Fitting, Adapter, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi |
|
SAE AS 4231C |
FITTING, ELBOW, 45°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING |
|
SAE AS 4305 |
Tee Assembly, Flared Tube, Adjustable End on Run, for Seal Ring |
|
SAE AS 4499C |
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO STRAIGHT |
|
SAE AS 468C |
Drive-Accessory, 5 |
|
SAE AS 4694A |
Fitting Assembly, Cap, Hollow End, Acorn, Short Flareless |
|
SAE AS 4726 |
Nuts, Self-Locking, UNS S66286 Classification: 220 ksi/850 Degrees F Procurement Specification-Superseding AS 1371; FSC 5310 |
|
SAE AS 50861/1 |
Wire, Electrical, Polyvinyl Chloride Insulated, Nylon Jacket, Tin-Coated Copper Conductor, 600-Volt, 105 Degrees C-FSC 6145 |
|
SAE AS 5420C |
Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification |
|
SAE AS 5649 |
Wire and Cable Marking Process, UV Laser |
|
SAE AS 6399 |
Hose, Rubber, Wire-Wound, Synthetic, Ice Eliminating System-Should Be Used Instead of MIL-H-6399B, Which Was Cancelled on 1 July 1999 |
|
SAE AS 7118/2 |
Nadcap REQUIREMENTS FOR METAL BONDING |
|
SAE AS 7210A |
Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for-UNS S30200; FSC 5315 |
|
SAE AS 7240 |
Washers, Spring Lock, Carbon Steel, Procurement Specification for-:1992 |
|
SAE AS 81044/13 |
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated High Strength Copper Alloy, Light Weight, 600-Volt, 150 Degrees C |
|
SAE AS 81714/28 |
Terminal Junction System, Terminal Junction Blocks, Grounding Modules, Integral Bracket Mounting, Series I-FSC 5940 |
|
SAE AS 85049/65 |
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, SPLIT, 90°, CATEGORY 4C (MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935 |
|
SAE AS 85052/4 |
Clamp Support - Loop Clamp-FSC 5340 |
|
SAE AS 85421/6A |
FITTING, CROSS, BEAM SEAL, 3000/4000 PSI, MALE ENDS |
|
SAE AS 85421/8A |
FITTING, CROSS, REDUCER, BEAM SEAL 3000/4000 PSI, 4 MALE ENDS |
|
SAE AS 895B |
FITTING, ELBOW, 45°, STANDARD AND REDUCER FLARELESS TUBE TO PIPE, EXTERNAL THREAD |
|
SAE AS 9204B |
Gasket - Metal O-Ring, .094 Tube x .010 Wall, Cres - UNS S31200-FSC 5330 |
|
SAE AS 9304A |
(R) STUD, SHOULDERED, STEPPED, HEX., WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A-FSC 5307 |
|
SAE MA 2093 |
Fitting End, Dimensions, Fluid Systems Port Connection, Metric-FSC 4730 |
|
SAE MA 3374A |
Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric-UNS S66286; FSC 5306 |
|
SAE AIR 1160C |
Aircraft Engine and Accessory Drives and Flange Standards |
|
SAE AIR 1184A |
Capacitive Fuel Gauging System Accuracies |
|
SAE AIR 1412B |
(R) Designing for Long Life With Elastomers |
|
SAE AIR 1678A |
Uncertainty of In-Flight Thrust Determination |
|
SAE AIR 1752A |
Aircraft Nosewheel Steering/Centering Systems |
|
SAE AIR 1826 |
Acoustical Considerations for Aircraft Environmental Control System Design |
|
SAE AIR 1957 |
Heat Sinks for Airborne Vehicles |
|
SAE AIR 5924 |
Guidelines for the Integration of Electronic Engine Control Systems with Transport Category Aircraft Systems |
|
SAE AIR 5937 |
Information on Electric Brakes |
|
SAE AIR 810C |
Degradation Limits of Hydrocarbon-Based Hydraulic Fluids, Mil-H-5606, Mil-H-6083, Mil-H-83282 and Mil-H-46170 Used in Hydraulic Test Stands |
|
SAE ARP 1084 |
Hydraulic External Leakage for In-Service Components |
|
SAE ARP 1283A |
Cargo Compartment Lighting for Transport Category Aircraft and Rotorcraft |
|
SAE ARP 1382 |
Balancing Machine Tooling, Design Criteria for |
|
SAE ARP 147E |
(R) Environmental Control Systems Terminology |
|
SAE ARP 1507A |
Helicopter Engine/Airframe Interface Document and Checklist |
|
SAE ARP 1532A |
Aircraft Oxygen System Lines, Fabrication, Test and Installation |
|
SAE ARP 1533A |
Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines |
|
SAE ARP 1575B |
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding Hand Applied Phosphoric Acid Anodizing |
|
SAE ARP 1665A |
Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft |
|
SAE ARP 1907A |
Automatic Braking Systems Requirements |
|
SAE ARP 1928A |
Torque Recommendations for Attaching Electrical Wiring Devices to Terminal Boards or Blocks, Studs, Posts, etc. |
|
SAE ARP 217D |
Testing of Airplane Installed Environmental Control Systems (ECS) |
|
SAE ARP 219 |
Conducting Test of Hydraulic Components in Contamination Controlled System, Procedure and Method for |
|
SAE ARP 4102/2 |
Automatic Braking System (ABS) |
|
SAE ARP 4102/8A |
Flight Deck Head-Up Displays |
|
SAE ARP 4266 |
Hole Contour, Fluid Passage, Tube Fitting |
|
SAE ARP 4285 |
Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure |
|
SAE ARP 4848 |
Flaring (Swaging) and Removal of Shank Nuts |
|
SAE ARP 4900 |
Liquid Rocket Engine Reliability Certification |
|
SAE ARP 498B |
Design, Layout, Criteria - Plastic Integrally Lighted Panels |
|
SAE ARP 5007A |
Development Process - Aerospace Fly-By-Wire Actuation System |
|
SAE ARP 5475 |
Abuse Load Testing for In-Seat Deployable Video Systems |
|
SAE ARP 9107 |
Direct Delivery Authorization Guidance for Aerospace Companies |
|
SAE ARP 958D |
Electromagnetic Interference Measurement Antennas; Standard Calibration Method |
|
SAE AS 107D |
Surface Finish (RMS)-Reaffirmed Noncurrent May 2006 |
|
SAE AS 116913 THRU AS 116924A |
(R) SCREW - OVAL FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS K00802, .1120-40 UNC - 2A |
|
SAE AS 14241 |
Clamp, Loop Type, Cushioned Support, Metric-FSC 5340 |
|
SAE AS 15531 |
Digital Time Division Command/Response Multiplex Data Bus |
|
SAE AS 17107A |
(R) BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, STANDARD LIGHT, TYPE I |
|
SAE AS 17184A |
(R) SCREW, EXTERNALLY RELIEVED BODY, CRES - (SYNCHRO) |
|
SAE AS 1733D |
Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type II |
|
SAE AS 17983 |
Compass, Magnetic, Pilot´s Standby-FSC 6605; Should Be Used Instead of MS17983, Which Was Cancelled on 30 August 1999 |
|
SAE AS 1875 |
Boss, Low Pressure (500 psi) Standard Dimensions for |
|
SAE AS 1914C |
(R) HOSE ASSEMBLY, POLTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 90 DEGREE TO 90 DEGREE |
|
SAE AS 264E |
Instrument and Cockpit Lighting for Commercial Transport Aircraft |
|
SAE AS 3080 |
I NSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT STUD LOCKING, 1.5 DIA NOM LENGTH-FSC 5340 |
|
SAE AS 3101 |
Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .3125-24 UNJF-3A-FSC 5306 |
|
SAE AS 3221A |
Cover - Engine Accessory Drive, Square, 2.653 Bolt Circle, AMS 4490-FSC 2995 |
|
SAE AS 3235B |
(R) BOLT, TEE HEAD - CRES, UNS N07001, 165 KSI MIN, CHAMFERED, .3750-24 UNJF-3A |
|
SAE AS 3247B |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A |
|
SAE AS 3253B |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A |
|
SAE AS 3326 |
Nut, Self-Locking-Captive Washer, Steel-FSC 5310 |
|
SAE AS 36100A |
Air Cargo Unit Load Devices - Performance Requirements and Test Parameters |
|
SAE AS 39029/7 |
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (for Mil-C-26482 Series 2 and Mil-C-81703 Series 3 Connectors)-FSC 5935 |
|
SAE AS 396B |
Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro)-Reaffirmed Noncurrent July 2001 |
|
SAE AS 4098A |
Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 400 Degrees F, 5000 psi Hydraulic and Pneumatic |
|
SAE AS 4324 |
Washer, Flared Tube Fitting Adjutable End, Design Standard |
|
SAE AS 4327 |
Sleeve, Flared Tube Fitting |
|
SAE AS 4473B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45° TO 90° |
|
SAE AS 4488 |
Tubular Assemblies, Fusion Welded, Inspection Processes and Acceptance Standards for |
|
SAE AS 4546 |
HOSE, AIR DUCT, FLEXIBLE, SILICONE-COATED FABRIC, 1 TO -.5 psi, EXTERNAL NYLON HELIX, SELF-EXTINGUISHING-fsc 4720 |
|
SAE AS 4580 |
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Flareless, Straight to Straight |
|
SAE AS 4676A |
Fitting, Tee, Bulkhead and Boss on Run, Short Flareless-FSC 4730 |
|
SAE AS 4683B |
(R) FITTING, ELBOW, 45°, REDUCER, BULKHEAD, FLARELESS AND SHORT FLARELESS |
|
SAE AS 4704B |
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to Straight Male |
|
SAE AS 4751/1 |
COUPLING, SHEET METAL, 40 DEGREES V-BAND, WIDE, STANDARD LATCH-FSC 5342 |
|
SAE AS 4775A |
Aircraft Maintenance Jacks - General Requirements |
|
SAE AS 5163 |
Fitting, Connector, Multiple Fluid Pressure Line, 75 Degree-FSC 4730 |
|
SAE AS 5164A |
Fitting, Connector, Multiple Fluid Pressure Line, 45° |
|
SAE AS 5452A |
Night Vision Goggles (NVG) Compatible Lighting for Civil Aircraft |
|
SAE AS 5692/1 |
ARC FAULT CIRCUIT BREAKER, TRIP FREE, PUSH-PULL, FUSIBLE LINK DESIGN, 2 ½ -15 AMPS, TYPE I |
|
SAE AS 647B |
(R) Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to Straight |
|
SAE AS 666C |
Cavity Design and O-Ring Selection for Static Seal Use in Aircraft Tubeless Tire Wheels |
|
SAE AS 7092A |
Fittings, Cargo Tiedown, Aircraft-FSC 1670; Should Be Used Instead of MIL-F-7092(2), Which Was Cancelled on 07 September 1999 |
|
SAE AS 7109/4A |
(R) Nadcap Requirements for Stripping of Coated Material |
|
SAE AS 81044/10 |
WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY, MEDIUM WEIGHT, 600-VOLT, 150°C |
|
SAE AS 81714/10 |
TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK, FEEDTHRU TYPE, SERIES I-FSC 5940 |
|
SAE AS 81714/15 |
TERMINAL JUNCTION SYSTEM, GROUNDING STUD, SERIES I-FSC 5940 |
|
SAE AS 81714/18 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 20, Series I-FSC 5940 |
|
SAE AS 81714/8 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 16, Series I-FSC 5940 |
|
SAE AS 9733 |
Bolt, Machine - Double Hexagon, Extended Washer Head, PD Shank, CRES AMS 5643, .250-28 UNJF-3A-FSC 5306 |
|
SAE AS 9805 |
BOLT, MACHINE-HEXAGON HEAD, PD SHANK, AMS 5643, .190-32 UNJF-3A |
|
SAE AS 9955 |
Packing, Preformed - AMS 3668, |
|
SAE MA 3287 |
Bolt, Machine-Spline Extended Washer, PD Shank Long Thread, AMS5731, Metric-FSC 5306 |
|
SAE MA 3288 |
NUT, PLAIN HEX - UNS S66286, MJ THREAD, METRIC |
|
SAE MA 4016 |
Ring, Retaining - External, Spiral Wound, Heavy & Medium Duty CRES, Metric-FSC 5365 |
|
SAE AIR 1392A |
Oxygen System Maintenance Guide |
|
SAE AIR 5273 |
Actuation System Failure Detection Methods |
|
SAE AIR 5541 |
Recommended Actions When Disinfectants, De-icers, and Cleaners Come in Contact with Landing Gear Structure |
|
SAE AIR 5696 |
Aerospace Fluid Power - FAA Regulatory History - Transport Airplane Hydraulic Systems |
|
SAE AIR 825/13 |
Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems |
|
SAE ARD 5708 |
Frequently Asked Questions About IEEE-1394b and SAE AS5643 |
|
SAE ARP 1161A |
Crew Station Lighting - Commercial Aircraft |
|
SAE ARP 1201C |
(R) Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings |
|
SAE ARP 1341B |
Determining Decarburization and Carburization in Finished Parts of Carbon and Low-Alloy Steels |
|
SAE ARP 142B |
Assembling of Studs in Aluminum and Magnesium |
|
SAE ARP 1616A |
Self-Sealing Breakaway Valves for Crash-Resistant Aircraft Fuel and Oil Systems |
|
SAE ARP 1953A |
ACCEPTANCE TEST PROCEDURES AND STANDARDS TO INSURE CLEAN FUEL SYSTEM COMPONENTS |
|
SAE ARP 4005A |
Selection and Application of Relays for Proper Performance |
|
SAE ARP 4050 |
Balancing Machines - Description and Evaluation Vertical, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors |
|
SAE ARP 4169A |
(R) Night Vision Goggle (NVG) Filters |
|
SAE ARP 4715 |
Induction Hardening of Steel Components |
|
SAE ARP 4822 |
Night Vision Imaging System (NVIS) Compatible Illuminated Pushbutton Switches and Indicators |
|
SAE ARP 4895A |
(R) Flight Control Actuators - Dynamic Seals, Collection of Duty Cycle Data |
|
SAE ARP 4919 |
Fluid Connections, Fittings, Hex Width |
|
SAE ARP 4977 |
Drying of Thermosetting Composite Materials |
|
SAE ARP 503F |
Emergency Evacuation Illumination |
|
SAE ARP 5507 |
Aircraft Tire-to-Wheel Performance Characteristics |
|
SAE ARP 594D |
FUEL PUMP THERMAL SAFETY DESIGN |
|
SAE ARP 599C |
Aerospace - Dynamic Test Method for Determining the Relative Degree of Cleanliness of the Downstream Side of Filter Elements |
|
SAE ARP 841A |
Leads, Flexible, Shielded, High Energy Ignition |
|
SAE ARP 953B |
Stress Dome in Fasteners |
|
SAE ARP 993C |
Fluidic Technology |
|
SAE ARP 997C |
(R) Installation and Stowage Provisions for Emergency Equipment in the Transport Aircraft Passenger Cabin |
|
SAE AS 1078 |
Fitting End - Flared Tube Connection, Extended Thread |
|
SAE AS 1145B |
Aircraft Brake Temperature Monitor Systems (BTMS) |
|
SAE AS 116925 THRU AS 116960 |
Screw - Oval Fillister Head, .138-32 |
|
SAE AS 14169 |
CIRCULAR SPLINE AND ADAPTER DETAILS ENGINE DRIVEN ACCESSORIES-FSC 6115 |
|
SAE AS 1614C |
Main Line Aircraft Tow Bar Attach Fitting Interface |
|
SAE AS 162501 THRU AS 162800A |
(R) STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A |
|
SAE AS 1735C |
Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type II-FSC 4730 |
|
SAE AS 1969 |
Coupling Assembly, Self-Sealing, Quick Disconnect Fuel and Oil System Components |
|
SAE AS 21942A |
(R) BODY, CLUSTER FITTING, ONE WAY, FLARELESS |
|
SAE AS 24463B |
(R) BEARING, ROLLER, NEEDLE-SINGLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE III, ANTIFRICTION, INCH-FSC 3110 |
|
SAE AS 27166 |
Valve, Pressure Equalizing, Gaseous Products |
|
SAE AS 3169 |
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .3125-24 UNJF-3A |
|
SAE AS 3170 |
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .375-24 UNJF-3A |
|
SAE AS 3234 |
Bolt, Tee Head - AMS 5708, Chamfered, .3125-24 UNJF-3A-FSC 5306 |
|
SAE AS 3415 |
Bolt, Machine - Hexagon Head, PD Shank, AMS 5662, .3125-24UNJF- 3A (Stress Rupture Resistant)-FSC 5306 |
|
SAE AS 3496 |
Gasket - Type XVI Engine Accessory Drive-FSC 5330 |
|
SAE AS 35051 |
Cover for Use with MS90362 external Power Receptacle-FSC 5935 |
|
SAE AS 3531 |
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, Drilled Head, UNS S66286 - 160 ksi-FSC 5306 |
|
SAE AS 3585 |
Pin and Plug, Expansion, Kit Cres, 416, Short-FSC 5340 |
|
SAE AS 3588 |
Pin and Plug, Expansion, Kit Al Alloy 2024, Short-FSC 5340 |
|
SAE AS 39029/25A |
R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-26482 SERIES 1 CONNECTORS) |
|
SAE AS 39029/72 |
Contacts, Electrical Connector, Socket, Removable, Solderless Wrappost Termination (for MIL-C-38999 Series I, II, III, and IV, MIL-C-24308, and MIL-C-55302/68, /71, and /75 Connectors)-FSC 5935 |
|
SAE AS 4225 |
Fitting, Elbow, 90 Degree, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi |
|
SAE AS 4232C |
FITTING, ELBOW, 90°, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING |
|
SAE AS 4306 |
Tee Assembly, Flared Tube, Adjustable End on Side, for Seal Ring |
|
SAE AS 4348 |
Adapter Assembly, Retained Nut to Boss |
|
SAE AS 4506A |
Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification-FSC 5306 |
|
SAE AS 4671A |
Fitting, Tee, Short Flareless-FSC 4730 |
|
SAE AS 4691D |
Fitting Assembly, Tee, Flareless and Short Flareless, Reducer, Retained Nut on Run |
|
SAE AS 471C |
Flange-Accessory, 5 |
|
SAE AS 4802B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45° FEMALE |
|
SAE AS 4833 |
Aircraft New Tire Standard - Bias and Radial |
|
SAE AS 5171 |
Washer, Flat, Fitting, Flared and Flareless |
|
SAE AS 5229 |
PORT, INTERNAL STRAIGHT THREAD, AIR CONNECTION, DESIGN STANDARD |
|
SAE AS 5389 |
Pallet Lift Truck and Container Fork Pocket Interface |
|
SAE AS 5652 |
10 Megabit/sec Network Configuration Digital Time Division Command/Response Multiplex Data Bus |
|
SAE AS 629C |
Hose Assembly, 3000 psi, PTFE, Flared, Straight to 90 Degree, Heavyweight |
|
SAE AS 7109/2A |
(R) Nadcap Requirements for Vapor Deposited Coatings |
|
SAE AS 7109/6A |
(R) Nadcap Requirements for Plating of Coated Parts |
|
SAE AS 7110/3D |
Nadcap Requirements for Electron Beam Welding |
|
SAE AS 7110/6D |
Nadcap Requirements for Laser Welding |
|
SAE AS 7112/4 |
National Aerospace and Defense Contractors Accreditation Program Requirements for Hose/Tube Assembly |
|
SAE AS 7116/4 |
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR LASER BEAM MACHINING (LBM) |
|
SAE AS 7469 |
Bolts and Screws, UNS N07041 Nickel Alloy, Corrosion and Heat Resistant, 155 ksi, Procurement Specification-FSC 5306; Supersedes AMS 7469B |
|
SAE AS 8004 |
Minimum Performance Standard for Turn and Slip Instrument |
|
SAE AS 8019A |
Airspeed Instruments |
|
SAE AS 81714/22 |
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junction, Integral Resistor, Series I-FSC 5940 |
|
SAE AS 81714/23 |
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junctions, Integral Fuse, Series I |
|
SAE AS 81714/26 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 20-2, Series I-FSC 5940 |
|
SAE AS 81822/1 |
WIRE, ELECTRICAL, SOLDERLESS WRAP, POLYETHYLENE TEREPHTHALATE-POLYESTER LAMINATED TAPE INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145 |
|
SAE AS 85049/120 |
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREES SELF-LOCKING, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935 |
|
SAE AS 85049/124A-A1 |
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) |
|
SAE AS 85049/140 |
CONNECTOR ACCESSORIES, ELECTRICAL BOOTS, HEAT-SHRINKABLE, STRAIGHT, CATEGORY 9-FSC 4090 |
|
SAE AS 85485 |
Cable, Electric, Filter Line, Radio Frequency Absorptive-FSC 6145; Amendment 1 - December 2004 |
|
SAE AS 85731/2 |
FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF-LOCKING, FORCE LIMITING-FSC 5340 |
|
SAE AS 91711A |
(R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 KSI MIN .3125-24 UNF-3A |
|
SAE AS 9284A |
(R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A-FSC 5306 |
|
SAE AS 9398B |
BOLT, TEE HEAD, CHAMFERED - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A |
|
SAE AS 9433B |
BOLT, TEE HEAD, CHAMFERED - CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A |
|
SAE AS 9520B |
BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A |
|
SAE AS 9532A |
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A |
|
SAE AS 9579A |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A |
|
SAE AS 968C |
Flange - Accessory, 10.000 BC Round, Design Standard for |
|
SAE AS 9699A |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .3750-24 UNJF-3A |
|
SAE AS 9712 |
Screw, Machine - Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion & Heat Resistant Steel, .138-40 UNJF-3A-FSC 5306 |
|
SAE AS 9732 |
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres AMS 5643, .190-32 UNJF-3A-FSC 5306 |
|
SAE MA 2111C |
Fitting Assembly, Adapter Ring Locked Port Connection to 8 Degrees 30' Beam Seal 28 000 kPa, Metric-FSC 4730 |
|
SAE MA 3365 |
Bolt, Machine - Hex Head, Drilled, Full Shank, Long Thread, AMS 5731, Metric-FSC 5306 |
|
SAE MA 3434 |
Packing, Preformed - O-Ring Seal, AMS 7273, Metric-FSC 5330 |
|
SAE MA 4040A |
Washer, Key - Dual Locking Positions, Cres, UNS S32100, Metric-UNS S32100; FSC 5310 |
|
SAE AIR 1394A |
Cabling Guidelines for Electromagnetic Compatibility |
|
SAE AIR 1664A |
AIRCRAFT FLEXIBLE TANKS GENERAL DESIGN AND INSTALLATION RECOMMENDATIONS |
|
SAE AIR 1739A |
Information on Antiskid Systems |
|
SAE AIR 4023B |
(R) Aircraft Turbine Fuel Contamination History and Endurance Test Requirements |
|
SAE AIR 4092A |
Investigation of PTFE |
|
SAE AIR 4170A |
Reticulated Polyurethane Foam Explosion Suppression Material for Fuel Systems and Dry Bays |
|
SAE AIR 4548A |
Real-Time Modeling Methods for Gas Turbine Engine Performance |
|
SAE AIR 46B |
Preparation and Use of Chromel-Alumel Thermocouples for Aircraft Gas Turbine Engines |
|
SAE AIR 4766/2 |
Airborne Chemicals in Aircraft Cabins |
|
SAE AIR 4982 |
Aerospace Fly-By-Light Actuation Systems |
|
SAE AIR 5022 |
Reliability and Safety Process Integration |
|
SAE AIR 5145 |
Directory of Databases Part I - Whole Body Anthropometry Surveys |
|
SAE AIR 5396 |
Characterization of Aircraft Icing Conditions |
|
SAE AIR 5601 |
A Guideline for Application of RF Photonics to Aerospace Platforms |
|
SAE AIR 5648 |
Fuel Versus Oxygen: Evaluations and Considerations |
|
SAE AIR 5693 |
Compatibility of PTFE Hose Assemblies With Typical Fluids Found in Aerospace Applications |
|
SAE AIR 744B |
Aerospace Auxiliary Power Sources |
|
SAE ARP 1333A |
Nondestructive Testing of Electron Beam Welded Joints in Titanium-Base Alloys |
|
SAE ARP 1786B |
(R) Wheel Roll on Rim Criteria for Aircraft Application |
|
SAE ARP 4028 |
Aircraft/Engine Fuel Pump Two Phase (Slugging Flow) Inlet Performance Test and Evaluation |
|
SAE ARP 4101/1 |
Seats and Restraint Systems for the Flight Deck |
|
SAE ARP 4191C |
Gas Turbine Engine Performance Presentation for Digital Computer Programs Using FORTRAN 77 |
|
SAE ARP 4955A |
(R) Recommended Practice for Measurement of Static and Dynamic Characteristic Properties of Aircraft Tires |
|
SAE ARP 510A |
Moment Weight of Turbine and Compressor Rotor Blades |
|
SAE ARP 5265 |
Minimum Operational and Maintenance Responsibilities for Aircraft Tire Usage |
|
SAE ARP 5366 |
Autopilot, Flight Director, and Autothrust Systems |
|
SAE ARP 5904 |
Airborne Icing Tankers |
|
SAE ARP 5936 |
Landing Gear Storage |
|
SAE ARP 9090 |
Requirements for Industry Standard e-Tool to Collaborate Quality Assurance Activities Among Customers and Suppliers |