|
SAE ARP 988 |
Electrohydraulic Mechanical Feedback Servoactuators |
|
SAE AS 101 |
CROSS ASSEMBLY, RETAINED NUT, SHORT FLARELESS-FSC 4730 |
|
SAE AS 1050 |
Nut, Self-Locking, Accessory Mounting |
|
SAE AS 128687 THRU AS 128998 |
Stud - Straight, Drilled, .3125-18 x .3125-24 |
|
SAE AS 141F |
HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 90 DEGREE TO 90 DEGREE |
|
SAE AS 155901 THRU AS 156200A |
(R) STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A |
|
SAE AS 1636D |
Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, 45 Degree to 45 Degree |
|
SAE AS 18013 |
Indicator, Humidity, Plug, Color Change-FSC 6685; Should Be Used Instead of MS18013A(AS), Which Was Cancelled on 30 August 1999 |
|
SAE AS 18276 |
Lighting, Aircraft Interior, Installation of-FSC 6220 |
|
SAE AS 1893B |
(R) RING, WELD, 3000 psi, CRES |
|
SAE AS 22759/29 |
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT |
|
SAE AS 27197 |
Seal, Plain, Rubber, (Hot Air Resistant 400 Degree F), Mold in Groove-FSC 5330 |
|
SAE AS 3098 |
Screw, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .164-36 UNJF-3A-FSC 5305 |
|
SAE AS 3130 |
Pin, Expansion - CRES, 303, Long-FSC 5315 |
|
SAE AS 3252B |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A |
|
SAE AS 3482C |
NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F |
|
SAE AS 3623 |
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN SHEET 1 OF 14-FSC 5306 |
|
SAE AS 39029/21A |
(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-81511 SERIES 4 CONNECTORS) |
|
SAE AS 39029/46 |
Contacts, Electrical Connector, Socket, Crimp Removable, (for Mil-C-81511 Series 2 Connectors)-FSC 5935 |
|
SAE AS 39029/70 |
Connector Contact, Electrical Pin, Crimp Removable, for Mil-C-85028 (AS) Connectors-FSC 5935; Amendment 1 - December 2004 |
|
SAE AS 403A |
Stall Warning Instrument |
|
SAE AS 4201A |
PORT - RING LOCKED FLUID CONNECTION TYPE, 8000 psi DESIGN STANDARD |
|
SAE AS 4470B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 45° |
|
SAE AS 4500C |
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO 45° |
|
SAE AS 4674 |
Tee Assembly, Retained Nut on Run, Short Flareless-FSC 4730 |
|
SAE AS 4685A |
Fitting, Elbow, 90 Degrees, Reducer, Flareless and Short Flareless-FSC 4730 |
|
SAE AS 4692D |
Fitting Assembly, Tee, Flareless and Short Flareless, Reducer, Retained Nut on Side |
|
SAE AS 4736A |
(R) Female Ferrule, Threadless - Flexible, Fixed Cavity, Self-Bonding, Butt Welded-FSC 4730 |
|
SAE AS 47642A |
Validation Methods for MIL-STD-1760C Aircraft Station Interfaces |
|
SAE AS 4774A |
Hose, Air Duct, Flexible, Silicone-Coated Fabric, 1 psi, External Nylon Helix, Self-Extinguishing-FSC 4720 |
|
SAE AS 5203 |
Tube End, Double Flare, Design Standard-FSC 4730 |
|
SAE AS 5657 |
Test Plan/Procedure for AS5643 IEEE-1394b Interface Requirements for Military and Aerospace Vehicle Applications |
|
SAE AS 5778 |
Covers, Aircraft Components, General Requirements for |
|
SAE AS 5900B |
(R) Standard Test Method for Aerodynamic Acceptance of SAE AMS 1424 and SAE AMS 1428 Aircraft Deicing/Anti-icing Fluids |
|
SAE AS 5979 |
FITTING ASSEMBLY, 45°, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI-FSC 4730 |
|
SAE AS 6136 |
Conduit, Electrical, Flexible, Shielded, Aluminum Alloy for Aircraft Installations-FSC 5975 |
|
SAE AS 626C |
Hose Assembly, 3000 psi, PTFE, Flareless, 90 Degree to 90 Degree, Heavyweight |
|
SAE AS 630C |
HOSE ASSEMBLY, 3000 psi, PTFE, FLARED, 45° TO 45°, HEAVYWEIGHT |
|
SAE AS 7106/3 |
National Aerospace and Defense Contractors Accreditation Program Quality Assurance Program Requirements - Procurement |
|
SAE AS 7200/1A |
National Aerospace and Defence Contractors Accreditation Program (NADCAP) Audit and Inspection Procedures and Checklists for the Sealant Manufacturers Accreditation Program |
|
SAE AS 7220 |
Aluminum Rivets, UNS A91100, 99Al (1100-H14)-Superseding AMS 7220; UNS A91100; FSC 5320 |
|
SAE AS 8020 |
Minimum Performance Standards for Engine Driven D.C. Generators/ Starter-Generators and Associated Voltage Regulators |
|
SAE AS 81044/11 |
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated Copper, Light Weight, 600-Volt, 150 Degrees Celsius |
|
SAE AS 91701A |
(R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 KSI MIN .2500-28 UNF-3A |
|
SAE AS 9308A |
(R) STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A-FSC 5307 |
|
SAE AS 9375B |
GASKET - METAL O-RING, .094 TUBE X .010 WALL, SILVER PLATED, CRES - UNS S32100-FSC 5330 |
|
SAE AS 9400A |
BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3750-24 UNJF-3A |
|
SAE AS 9434B |
BOLT, TEE HEAD, CHAMFERED - CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A |
|
SAE AS 9527A |
SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A |
|
SAE AS 9597A |
(R) BRACKET, ANGLE, 90 DEGREES, CADMIUM PLATED, STEEL UNS G41300, .190 X .250 BOLT-FSC 5340 |
|
SAE AS 9602A |
(R) BRACKET, ANGLE, 90 DEGREES, CRES UNS S41000, .190 X .312 BOLT-FSC 5340 |
|
SAE AS 9685A |
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKELCADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A |
|
SAE AS 9716A |
BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A |
|
SAE AS 9741B |
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S17400, 140 KSI MIN .1900-32 UNJF-3A-FSC 5306 |
|
SAE AS 9759 |
Bolt, Machine - Double Hexagon Extended Washer Head Drilled, PD Shank, Titanium AMS 4967, .190-32 UNJF-3A-FSC 5306 |
|
SAE AS 9785 |
Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .3125-24 UNJF-3A-FSC 5306 |
|
SAE AS 9917 |
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .375-24 UNJF-3A |
|
SAE MA 2536 |
Gasket, Metal C-Ring, Face Seal, Internal Pressure, UNS N07750 Silver Plated, Metric-FSC 5330; UNS N07750 |
|
SAE MA 3274 |
NUT - SELF-LOCKING, CLINCH, SERRATED SHANK, 400 °C, DRY FILM COATED, UNS S66286, MJ THREAD, METRIC-FSC 5310 |
|
SAE MA 3295 |
Clip - Spring, Tension, Inner 5.5 mm Bolt Hole, AMS 5525, Metric-FSC 5340 |
|
SAE MA 3350 |
Nut, Castellated, Hex - UNS S66286, MJ Thread, Metric-FSC 5310; UNS S66286 |
|
SAE MA 4020 |
Ring, Retaining - External, Tapered, Type I, Class 2 AMS 5520, Metric-FSC 5365 |
|
SAE MA 4037A |
Washer, Key - 90 Degree Locking, Cres, UNS S32100, Metric-UNS S32100; FSC 5310 |
|
SAE MA 4535 |
Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric |
|
SAE AIR 1082B |
Fluid-System-Component Specification Preparation Criteria |
|
SAE AIR 1093A |
Numeral, Letter and Symbol Dimensions for Aircraft Instrument Displays |
|
SAE AIR 1106A |
Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights |
|
SAE AIR 1263 |
Tin Plated Solderless Terminal Lugs and Splices on Nickel Coated High Temperature Wire |
|
SAE AIR 1273A |
Identification and Coding of Fluid and Electrical Piping System Functions |
|
SAE AIR 1379A |
Prestressing (Autofrettaging) of Hydraulic Tubing Lines |
|
SAE AIR 1615A |
Thesaurus for Fuel System Components |
|
SAE AIR 1780A |
Aircraft Flotation Analysis |
|
SAE AIR 1810C |
(R) Design, Development and Test Criteria - Solid State Proximity Switches/Systems for Landing Gear Applications |
|
SAE AIR 4002 |
8000 psi Hydraulic Systems: Experience and Test Results |
|
SAE AIR 4012B |
(R) USAF Aircraft Wheels |
|
SAE AIR 4243 |
Landing Area/Landing Gear Compatibility - A Brief History of SAE/Corps of Engineers Cooperation |
|
SAE AIR 4567A |
Military Composite Electrical Connectors |
|
SAE AIR 4846 |
Extraordinary and Special Purpose Landing Gear Systems |
|
SAE AIR 5109 |
Applications of Probabilistic Methods |
|
SAE AIR 5279 |
Composite and Bonded Structure Inspector: Training Document |
|
SAE AIR 746B |
Environmental Control for Civil Supersonic Transport |
|
SAE AIR 809A |
Metal Dimensional Change with Temperature |
|
SAE AIR 822B |
Oxygen Systems for General Aviation |
|
SAE AIR 825/9 |
Demand Oxygen Systems |
|
SAE AIR 877B |
Aerospace-Particle Count Data Conversion and Extrapolation |
|
SAE AIR 887B |
Liquid Filter Ratings, Parameters and Tests |
|
SAE AIR 947 |
Engine Erosion Protection |
|
SAE ARD 50016 |
Head-Up Display Human Factor Issues |
|
SAE ARD 50046 |
RMS Information Sourcebook |
|
SAE ARP 1210D |
Gas Turbine Engine Interface Test Data Reduction Computer Programs |
|
SAE ARP 1280A |
(R) Aerospace - Application Guide for Hydraulic Power Transfer Units |
|
SAE ARP 1328B |
Aircraft Ground Support Equipment - Wind Stability Determination |
|
SAE ARP 1352 |
Helicopter Mission Definition |
|
SAE ARP 1482B |
Recommendations for Fuel and Oil System Schematics |
|
SAE ARP 1840B |
Aircraft Engine Transport Devices |
|
SAE ARP 1842 |
Surface Preparation for Structural Adhesive Bonding Aluminum Alloy and Low Alloy Steel Parts |
|
SAE ARP 1874 |
Design Objectives for CRT Displays for Part 25 (Transport) Aircraft |
|
SAE ARP 1915C |
Aircraft Tow Bar |
|
SAE ARP 1972 |
Recommended Measurement Practices and Procedures for EMC Testing |
|
SAE ARP 3050 |
Suitable Test Sizes for O-ring Specifications |
|
SAE ARP 4084A |
Aircraft Ground Service Connections Locations and Type |
|
SAE ARP 4104 |
Design Objectives for Handling Qualities of Transport Aircraft |
|
SAE ARP 5323 |
Balancing Machines - Description and Evaluation Vertical, Single-Plane, Hard-Bearing Type for Gas Turbine Rotors |
|
SAE ARP 5369 |
Guidelines for Wire Identification Marking Using the Hot Stamp Process |
|
SAE ARP 5600 |
Disposition of Damaged Wheels Involved in Accidents/Incidents |
|
SAE ARP 5647 |
High Intensity Discharge Light Sources |
|
SAE ARP 5818 |
Design and Operation of Aircraft Refueling Tanker Vehicles |
|
SAE ARP 5873 |
LED Passenger Reading Light Assembly |
|
SAE ARP 5918 |
Standard Test Criteria for Aircraft Refuelers |
|
SAE ARP 694B |
Aerial Refueling Lights- Design Criteria |
|
SAE ARP 704A |
Helicopter Engine-Rotor System Compatibility |
|
SAE ARP 741B |
Turbofan and Turbojet Gas Turbine Engine Test Cell Correlation |
|
SAE ARP 836B |
Design and Safety Criteria for Passenger Boarding Stairways |
|
SAE ARP 89D |
Aircraft Compartment Automatic Temperature Control Systems |
|
SAE AS 115851 THRU AS 115900A |
(R) SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-20 UNC - 3A-FSC 5305 |
|
SAE AS 1249A |
ELBOW, 45°, FLARED TUBE BULKHEAD UNIVERSAL, FOR SEAL RING |
|
SAE AS 125101 THRU AS 125250A |
Rivet-100 Degree Countersunk Head, Mild Steel |
|
SAE AS 1284A |
STANDARD TEST PROCEDURE AND LIMIT VALUE FOR SHUTOFF SURGE PRESSURE OF PRESSURE FUEL DISPENSING SYSTEMS |
|
SAE AS 1365A |
Tee, Flared Tube, Bulkhead Universal on Run, for Seal Ring |
|
SAE AS 1472A |
Hose Assembly, Low Pressure, Potable Water |
|
SAE AS 1958 |
PORT-FLUID CONNECTION, RING LOCKED INSERT, STANDARD DIMENSIONS FOR-FSC 4730; |
|
SAE AS 25438 |
TERMINAL-LUG, CRIMP STYLE, RIGHT ANGLE TYPE, FOR ALUMINUM AIRCRAFT WIRE,CLASS 1-FSC 5940 |
|
SAE AS 3081 |
Insert - CRES Helical Coil Fine Thread, Straight Stud Locking, 2 Dia Nom Length-FSC 5340 |
|
SAE AS 3089A |
(R) STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, .3750-24 UNJF-3A X .3750-24 UNJF-3A |
|
SAE AS 3096 |
Insert - CRES Helical Coil Fine Thread, Locking (Low Friction Systems) 2.5 Dia Nom Length-FSC 5340 |
|
SAE AS 3168 |
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .250-28 UNJF-3Am |
|
SAE AS 3402 |
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .3125-24 UNJF-3A-FSC 5306 |
|
SAE AS 34591 |
Connector, Plug, Electrical, Self-Locking, Coupling Nut, Rear Release, Crimp Contact, AN Type-FSC 5935; Should Be Used Instead of MS3459 |
|
SAE AS 39029/47 |
Contacts, Electrical Connectors, Pin, Crimp Removable, (for Mil-C-81511 Series 1 and 2 Connectors)-FSC 5935 |
|
SAE AS 4389 |
Nut - Self-Locking Clinch, Serrated Shank, Hole Preparation, Installation and Removal Procedures-FSC 5310 |
|
SAE AS 4475B |
Hose Assembly, Lined Silicone, 125 psi, Flareless, Potable Water, Straight Male to Straight Female |
|
SAE AS 4589 |
HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 °F, TITANIUM FITTINGS, BEAM SEAL, 45° TO 45° |
|
SAE AS 4793 |
Fitting, Beam Seal, Male Tube End, Internal Swage, 4000 psi, Hydraulic |
|
SAE AS 4973A |
(R) Ring, Weld-FSC 4730 |
|
SAE AS 5014 |
Fitting, Sleeve, Straight, Flareless, External Swage, Hydraulic |
|
SAE AS 50571 |
Lights, Instrument, Individual, General Specification for-FSC 6220; Should Be Used Instead of MIL-L-5057F, Which Was Cancelled on 7 September 1999 |
|
SAE AS 53731 |
Fuse Holder, Block Type, Aircraft-FSC 5920; Should Be Used Instead of MIL-F-5373, Which Was Cancelled on 31 August 1999 |
|
SAE AS 5457 |
Aerospace Standard for Hand-Held Wire Stripper Tools |
|
SAE AS 5458A |
Hose Assembly, Metal - Medium Pressure, Flared, Welded, Straight to Straight |
|
SAE AS 5530 |
UNION, FLARELESS TUBE FITTING, INTERNALLY SWAGED-FSC 4730 |
|
SAE AS 5863 |
FITTING END, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD-FSC 4730 |
|
SAE AS 5929 |
BEARING, ROLLER, NEEDLE, TRACK ROLLER, CROWN RADIUSED O.D., INTEGRAL STUD, TYPE VII, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL AND CORROSION RESISTANT (CRES) STEEL, INCH-FSC 3110 |
|
SAE AS 5978A |
(R) FITTING ASSEMBLY, 45°, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
|
SAE AS 5994 |
Pump Units, Hydraulic, Electric Motor Driven, Variable Delivery |
|
SAE AS 6038 |
Bearings, Ball, Bellcrank, Antifriction, Airframe-FSC 3110 |
|
SAE AS 7110/9D |
Nadcap Requirements for Percussion Stud Welding |
|
SAE AS 7201 |
National Aerospace and Defense Contractors Accreditation Program (NADCAP) Requirements for Accreditation of Pass-Thru Distributors |
|
SAE AS 7202 |
National Aerospace and Defense Contractors Accreditation Program (NADCAP) Requirements for Accreditation of Value Added Distributors |
|
SAE AS 7237 |
Rivets, Nickel Alloy, Corrosion and Heat Resistant 47.5Ni-22Cr-1.5Co-9.0Mo-0.60W-18.5Fe Solution Heat Treated Procurement Specification For-FSC 5320; UNS N06002; Supersedes AMS 7237A |
|
SAE AS 7241 |
Washers, Spring Lock, Corrosion Resistant Steel 18Cr - 9Ni (UNS S30200), Procurement Specification for |
|
SAE AS 8011A |
Minimum Performance Standards for A-C Generators and Associated Regulators |
|
SAE AS 861B |
Minimum General Standards for Oxygen Systems |
|
SAE AS 90347 |
CABLE ASSEMBLY, EXTERNAL ELECTRIC POWER, AIRCRAFT 28 VOLT DC, OPERATING POWER-FSC 6150 |
|
SAE AS 9047 |
Pin - Spring, Steel, Phosphate Finish-FSC 5315 |
|
SAE AS 9296A |
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A-FSC 5306 |
|
SAE AS 9440A |
(R) BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A-FSC 5306 |
|
SAE AS 9450A |
R) SCREW, MACHINE - STEEL, DIFFUSED NICKELCADMIUM PLATED, HEXAGON HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A-FSC 5305 |
|
SAE AS 9516A |
(R) SCREW, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1380-40 UNJF-3A-FSC 5305 |
|
SAE AS 9517A |
(R) SCREW, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1640-36 UNJF-3A-FSC 5305 |
|
SAE AS 9603A |
(R) BRACKET, ANGLE, 90 DEGREES, CRES UNS S41000, .190 X .375 BOLT-FSC 5340 |
|
SAE AS 963B |
Drive-Studded, Accessory, (127) 5.000 BC Round, Design Standard for |
|
SAE AS 9678A |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A |
|
SAE AS 9686A |
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKELCADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A |
|
SAE AS 9742A |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S17400, 140 KSI MIN .2500-28 UNJF-3A-FSC 5306 |
|
SAE AS 9895 |
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, AMS 5616, .250-28 UNJF-3A-FSC 5306 |
|
SAE MA 1520A |
Areas for Calculating Stress or Load Values for Metric MJ Externally Threaded Fasteners |
|
SAE MA 2005B |
Tube Fittings, Aerospace Fluid Systems, Separable, For 24° Cone, General Specification, Metric (ISO 7169) |
|
SAE MA 3281B |
INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, FREE RUNNING, CRES, CADMIUM PLATED |
|
SAE MA 3296 |
Cushion - Tube Clamp Support, PTFE, Metric-FSC 5340 |
|
SAE MA 3391 |
STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 - 8 X 1-FSC 5307 |
|
SAE MA 4147 |
BOLT, SPLINE DRIVE, EXTENDED WASHER, REDUCED SHANK, AMS 5662, METRIC-FSC 5306; UNS N07718 |
|
SAE MA 4177 |
Nut, Self Locking - Hex Extended Washer UNS N07001, Silver Plate, MJ THD, Metric-FSC 5310 |
|
SAE MA 4360 |
Metric Wrenches: Nondistorting Flare Nut |
|
SAE MAP 4296 |
Drawing Interpretations, Standard Machining Practice, Tube Fittings and Connectors, Fluid Systems, Metric |
|
SAE AIR 1243B |
(R) Anti Blow-By Design Practice for Cap Seals |
|
SAE AIR 1244A |
Selecting Slipper Seals for Hydraulic-Pneumatic Fluid Power Applications |
|
SAE AIR 1269B |
Molded Rigid Plastic Parts |
|
SAE AIR 1564B |
(R) Cross Reference for Materials for Fluid Systems Components Including Military and Federal Specifications and Their International Equivalents |
|
SAE AIR 1603 |
Auxiliary Power System Considerations for Advanced Military Aircraft |
|
SAE AIR 1698A |
Hose Assembly Identification Practices |
|
SAE AIR 1845 |
Procedure for the Calculation of Airplane Noise in the Vicinity of Airports |
|
SAE AIR 1934A |
Use of Structural Carbon Heat Sink Brakes on Aircraft |
|
SAE AIR 1935 |
Methods of Controlling Distortion of Inlet Airflow During Static Acoustical Tests of Turbofan Engines and Fan Rigs |
|
SAE AIR 3260 |
Identification of Standard Utility Parts - Bolts and Nuts |
|
SAE AIR 4066B |
(R) Aerospace Fluid Power - Materials and Characteristics of Flight Control Servoactuators of Various Aircraft |
|
SAE AIR 4896 |
Recommended RMS Terms and Parameters |
|
SAE AIR 5024 |
Landing Gear Switch Selection Criteria |
|
SAE AIR 5026 |
Test Cell Instrumentation |
|
SAE AIR 5086 |
Perceptions and Limitations Inhibiting the Application of Probabilistic Methods |
|
SAE AIR 5358 |
Landing Gear Shock Strut Hydraulic Fluid |
|
SAE AIR 5426 |
Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance of |
|
SAE AIR 5428 |
Utility System Characterization, an Overview |
|
SAE AIR 5487A |
Aircraft Tire History |
|
SAE AIR 5689 |
Light Transmitting Glass Covers for Exterior Aircraft Lighting |
|
SAE AIR 825/10A |
Protective Breathing Equipment for Flight Deck and Cabin Crew Members |
|
SAE AIR 825/5A |
Liquid Oxygen Systems |
|
SAE ARD 50019 |
Human Engineering Issues for Enhanced Vision Systems |
|
SAE ARD 50050 |
Requirements for Models of Situation Awareness |
|
SAE ARP 1109B |
Dynamic Testing Systems for Oxygen Breathing Equipment |
|
SAE ARP 1202A |
Balancing Machines, Dynamic, Ball Type Slave Bearings for Rotor Support |
|
SAE ARP 1288A |
Placarding of Aircraft Hydraulic Equipment to Identify Phosphate Ester Fluid Compatibility |
|
SAE ARP 1308C |
Preferred Electrical Connectors for Aerospace Vehicles and Associated Equipment |
|
SAE ARP 1619A |
Replacement and Modified Brakes and Wheels |
|
SAE ARP 1801 |
Measurement of Exterior Sound Level of Specialized Aircraft Ground Support Equipment |
|
SAE ARP 1846 |
Measurement of Far Field Noise from Gas Turbine Engines During Static Operation |
|
SAE ARP 1931A |
Glossary of Terms with Specific Reference to Electrical Wire and Cable |
|
SAE ARP 4033 |
Pilot-System Integration |
|
SAE ARP 4102/5 SECTION I |
Primary Flight Controls by Electrical Signaling, Section I |
|
SAE ARP 497A |
Precision Control Motors- 400 Cycles |
|
SAE ARP 5029 |
Measurement Procedures for Strobe Anticollision Lights |
|
SAE ARP 5364 |
Human Factor Considerations in the Design of Multifunction Display Systems for Civil Aircraft |
|
SAE ARP 5365 |
Human Interface Criteria for Cockpit Display of Traffic Information |
|
SAE ARP 588B |
Balancing Machines - Description and Evaluation Vertical, Single-Plane, Soft-Bearing Type for Gas Turbine Rotors |
|
SAE ARP 695D |
Galley System Design and Installation Criteria |
|
SAE AS 115801 THRU AS 115850B |
SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .1900-32 UNF-3A-FSC 5305 |
|
SAE AS 1212 |
Electric Power, Aircraft, Characteristics and Utilization of |
|
SAE AS 121801 THRU AS 121850 |
Pin, Straight, Headed - 375 NOM.-FSC 5315 |
|
SAE AS 1253B |
TEE, FLARED TUBE, BULKHEAD UNIVERSAL ON SIDE, FOR SEAL RING |
|
SAE AS 1298 |
SLEEVE, HEAVY WALL, HOSE ASSEMBLY, CHAFE GUARD, TFE |
|
SAE AS 1337A |
Selected Aerospace Diameter Pitch Combinations of Metric 60 Degree Screw Threads for Nuts and Bolts |
|
SAE AS 140F |
HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 45 DEGREE TO 90 DEGREE |
|
SAE AS 1542A |
Hose, Air Duct, Flexible, Helical Convoluted, Self Extinguishing |
|
SAE AS 20218 |
Bearing, Ball, Anti-Friction, Airframe-FSC 3110; Should Be Used Instead of MS20218C, Which Was Cancelled on 24 August 1998 |
|
SAE AS 21442 |
Bearing, Roller, Needle, Track Roller, Sealed, Type X, Antifriction, Inch-FSC 3110; Should Be Used Instead of MS21442B, Which Was Cancelled on 24 January 2000 |
|
SAE AS 21939A |
(R) BOLT, CLUSTER FITTING, SINGLE PORT THROUGH, FLARELESS |
|
SAE AS 23003 |
Gages - Inspection for MS23002 Crimping Dies (for Use with MS25036 Insulated Terminals) |
|
SAE AS 24465 |
Bearing, Roller, Needle-Single Row, Heavy Duty, Track Roller, Type V, Antifriction, Inch-FSC 3110 |
|
SAE AS 24654 |
ELBOW, TUBE - 45°, BULKHEAD, FLARELESS TUBE UNIVERSAL TO FLARED TUBE-FSC 4730; Should Be Used Instead of MS24654, Which Was Cancelled on 1 August 1999 |
|
SAE AS 25043 |
COVER, ELECTRICAL CONNECTOR, RECEPTACLE, AN TYPE-FSC 5935 |
|
SAE AS 28914B |
(R) BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE III-FSC 3110; Should Be Used Instead of MS28914D, Which Was Cancelled on 02 September 1998 |
|
SAE AS 3086A |
(R) STUD - STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, .1900-32 UNJF-3A X .1900-32 UNJF-3A |
|
SAE AS 3087A |
(R) STUD - STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, .250-28 UNJF-3A X .250-28 UNJF-3A |
|
SAE AS 3088A |
(R) STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, .3125-24 UNJF-3A X .3125-24 UNJF-3A |
|
SAE AS 3090 |
Stud - Straight, Key Locked, CRES AMS 5731 .190-32 UNJF X .190-32 UNJF |
|
SAE AS 3103 |
Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .4375-20 UNJF-3A-FSC 5306 |
|
SAE AS 3171 |
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .4375-20 UNJF-3A |
|
SAE AS 3173 |
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .5625-18 UNJF-3A |
|
SAE AS 3175 |
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .250-28, UNJF-3A |
|
SAE AS 3322C |
STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .375-16UNJC X .375-24UNJF-FSC 5307 |
|
SAE AS 3573A |
Insert, Screw Thread, Non-Locking, Locked in, Key Locked, Extra Heavy-Duty, Self-Broaching Keys, UNS S66286 |
|
SAE AS 39029/100 |
Contacts, Electrical Connector, Socket, Crimp Removable, Coaxial, Size 5 (for DOD-C-83527 Connectors)-FSC 5935 |
|
SAE AS 39029/13 |
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, (For MIL-C-81511 Series 1 Connectors)-FSC 5935 |
|
SAE AS 39029/79 |
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (for MIL-C-28748/9 Connectors)-FSC 5935 |
|
SAE AS 4219 |
Fitting, Elbow, 45 Degree, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000 psi |
|
SAE AS 4226 |
Fitting, Elbow, 90 Degree, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000 psi |
|
SAE AS 4262A |
Aircraft Ground Air Conditioning Service Connection |
|
SAE AS 4322 |
Fitting End, Adjustable, Standard Dimensions for, Design Standard |
|
SAE AS 4325 |
Fitting End, Conical, Standard Dimensions for, Design Standard |
|
SAE AS 4477B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 90° FEMALE |
|
SAE AS 4478B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO STRAIGHT MALE |
|
SAE AS 44A |
Starter, Mounting Pads and Drives - Types I, II, III & IV |
|
SAE AS 4501C |
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO 90° |
|
SAE AS 4510 |
Fittings, Weld, Fluid Connection, 5000 psi |
|
SAE AS 4590 |
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Beam Seal, 45 Degree 90 Degree |
|
SAE AS 4591 |
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Beam Seal, 90 Degree 90 Degree |
|
SAE AS 4800B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 45° FEMALE |
|
SAE AS 4801B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90° FEMALE |
|
SAE AS 4851A |
Relative Thermal Life and Temperature Index for Insulated Electric Wire |
|
SAE AS 5370 |
Multi-Transmitter Bidirectional Fiber-Optic Data Bus for Distributed Aircraft Control Systems |
|
SAE AS 5382 |
Aerospace Cable, Fiber Optic |
|
SAE AS 5491C |
Calculation of Electron Vacancy Number in Superalloys |
|
SAE AS 5590 |
Connectors, Fiber Optic, Advanced, Circular or Rectangular, Plug and Receptacle, Environment Resistant, Removable Termini, General Specification For-Amendment 1 - July 2004 |
|
SAE AS 7110/2D |
Nadcap Requirements for Flash Welding |
|
SAE AS 7112/2 |
National Aerospace and Defense Contractors Accreditation Program Requirements for Fittings and Other Machined Components |
|
SAE AS 7283B |
Gaskets, Type XX Engine Accessory Drive Corrosion Resistant Steel Screen Reinforced Controlled Performance-FSC 5330 |
|
SAE AS 7974/1 |
CONNECTOR, PLUG, AIRCRAFT EXTERNAL POWER-FSC 5935 |
|
SAE AS 7974/3 |
CONNECTOR, PLUG, ATTACHABLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, SINGLE-JACKETED CABLE ASSEMBLIES, 115/200 VOLT, 400 HERTZ-FSC 5935 |
|
SAE AS 85049/112B |
CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) |
|
SAE AS 85049/118A |
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, NON-SELF-LOCKING, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935 |
|
SAE AS 85049/61A |
CONNECTOR ACCESSORIES, ELECTRICAL, RING, POTTING BOOT, CATEGORY 5 (MIL-C-27599 CONNECTORS)-FSC 5935 |
|
SAE AS 919 |
Shallow Groove Shafts and Locking Devices for Bearing Retaining Spanner Nuts |
|
SAE AS 9226 |
WIRE - STEEL, CORROSION AND HEAT RESISTANT, SAFETY, 1800 DEGREES F-Supersedes AMS 9226A; FSC 9525 |
|
SAE AS 9285A |
(R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A-FSC 5306 |
|
SAE AS 9307A |
(R) STUD, SHOULDERED, STEPPED, HEX., WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A-FSC 5307 |
|
SAE AS 9399A |
(R) BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3125-24 UNJF-3A |
|
SAE AS 9459A |
Bolt, Machine-Steel, AMS 6304, Diffused Nickel-Cadmium Plated Hexagon Head, .750-16 UNJF-3A |
|
SAE AS 9467A |
(R) Pin, Straight, Headed, .436 Diameter, Cres, UNS S66286 |
|
SAE AS 9601A |
(R) BRACKET, ANGLE, 90 DEGREES, CRES UNS S41000, .190 X .250 BOLT-FSC 5340 |
|
SAE AS 961B |
Drive - Studded, Accessory, 5.000 B.C. Square, Design Standard for |
|
SAE AS 9770 |
Packing, Preformed - AMS 3650, 'O' Ring-FSC 5330 |
|
SAE AS 9808 |
BOLT, MACHINE-HEXAGON HEAD, PD SHANK, AMS 5643, .375-24 UNJF-3A |
|
SAE AS 9846A |
(R) PIN, STRAIGHT, HEADED, .3124 DIAMETER, UNS S41800-FSC 5315 |
|
SAE AS 9916 |
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .3125-24 UNJF-3A-FSC 5306 |
|
SAE MA 14241 |
CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC-FSC 5340 |
|
SAE MA 14272 |
CLAMP, LOOP, CUSHIONED, ELONGATED, METRIC-FSC 5340 |
|
SAE MA 1547A |
Wrenches, Twelve Spline, Metric |
|
SAE MA 1566A |
Gaging Practice and Gage Requirements for MJ Metric Screw Threads |
|
SAE MA 2118B |
(R) Nut, Bulkhead, Fitting, Metric |
|
SAE MA 2150/1 |
CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, METRIC |
|
SAE MA 2538 |
Gasket, Metal C-Ring Seal Nickel Alloy, Corrosion and Heat Resistant, Metric Procurement Specification For-FSC 5330 |
|
SAE MA 3430A |
NUT, SELF LOCKING-REDUCED HEX DRIVE, AMS 6322, CADMIUM PLATED, MJ THREAD, METRIC |
|
SAE MA 3444 |
Nut, Self Locking - Spline Drive, Captive Washer, UNS S66286, Silver Plate, MJ Thread, Metric-FSC 5310 |
|
SAE MA 3450 |
Retainer, Nut and Bolt, Cup Lock 5 mm and 6 mm, AMS 5510, Metric-FSC 5340 |
|
SAE MA 4030 |
Ring, Retaining - External, Reinforced E-Ring, Type I Class 3 AMS 5520, Metric-FSC 5365 |
|
SAE SAE AS2390 |
Chemical Process Test Specimen Material |
|
SAE AIR 1204 |
Control of Water Carryover from the Environmental Control System and Condensation on the Structure |
|
SAE AIR 1245A |
(R) Power Sources for Fluidic Controls |
|
SAE AIR 1593 |
Clamp Loads and Bending Stresses in Aircraft Tubing Installations |
|
SAE AIR 1609A |
(R) Aircraft Humidification |
|
SAE AIR 1672B |
Practical Methods to Obtain Free-Field Sound Pressure Levels from Acoustical Measurements over Ground Surfaces |