|
SAE AIR 1794 |
BALL-ON-CYLINDER (BOC) AIRCRAFT TURBINE FUEL LUBRICITY TESTER |
|
SAE AIR 1800A |
Aircraft Tail Bumpers |
|
SAE AIR 1812A |
Environmental Control Systems Life Cycle Cost |
|
SAE AIR 1839B |
(R) Guide to Aircraft Turbine Engine Vibration Monitoring Systems |
|
SAE AIR 1873 |
Guide to Limited Engine Monitoring Systems for Aircraft Gas Turbine Engines |
|
SAE AIR 1904B |
Tire Spray Suppression - Airplane Design and Consideration for |
|
SAE AIR 38A |
Design of Threaded Screw or Stud Type Electrical Equipment Terminations, Guide for |
|
SAE AIR 4003 |
Report on Aircraft Engine Containment |
|
SAE AIR 4160A |
Alternatives to Cadmium Plating |
|
SAE AIR 4276 |
Survey Results: Computerization of Reliability, Maintainability & Supportability (RM&S) in Design |
|
SAE AIR 4403A |
(R) Selection, Testing, Lubrication, and Sealing of Single Row Tapered Roller Bearings for Aerospace Wheel Applications |
|
SAE AIR 4777A |
Nondestructive Inspection (NDI) Methods Used During Production and Operation of Aircraft Wheels and Brakes |
|
SAE AIR 4779A |
User’s Guide to AMS Specifications |
|
SAE AIR 4830 |
Aircraft Tire Condition Monitoring Systems |
|
SAE AIR 5006/2 |
Solid Rocket Booster Reliability Guidebook - Volume II Probabilistic Design and Analysis Methods for Solid Rocket Boosters |
|
SAE AIR 5386 |
Hose and Hose Assembly Selection, Installation, Inspection and Maintenance Guidelines, Listing of |
|
SAE AIR 5431 |
Repair Tooling |
|
SAE AIR 5664 |
JAUS History and Domain Model |
|
SAE AIR 5875 |
Methodology for Investigation of Flight Control System Anomalies |
|
SAE AIR 825/8 |
Continuous Flow Oxygen Systems |
|
SAE AIR 851B |
(R) O-Ring Tension Testing Calculations |
|
SAE AIR 910B |
(R) Ozone Problems in High Altitude Aircraft |
|
SAE ARP 1061A |
Altitude Alerting Devices and Systems |
|
SAE ARP 1307A |
Measurement of Exterior Noise Produced by Aircraft Auxiliary Power Units (APUs) and Associated Equipment During Ground Operation |
|
SAE ARP 1313B |
(R) Determination of Trace Elements in High Temperature Alloys |
|
SAE ARP 1332C |
Wave Soldering Procedure |
|
SAE ARP 1398A |
Testing of Oxygen Equipment |
|
SAE ARP 1538B |
(R) Arresting Hook Installation, Land-Based Aircraft |
|
SAE ARP 1610A |
Physical-Chemical Characterization Techniques, Epoxy Adhesive and Prepreg Resin Systems |
|
SAE ARP 1782A |
Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays |
|
SAE ARP 1838A |
Pictograms for Ground Support Equipment |
|
SAE ARP 260D |
Control Lever Connections (60 Degree V Serrations) |
|
SAE ARP 2654 |
Ultrasonic Thickness Testing |
|
SAE ARP 292C |
Environmental Control Systems for Helicopters |
|
SAE ARP 4102/1 |
On Board Weight and Balance System |
|
SAE ARP 4102/10A |
Collision Avoidance System |
|
SAE ARP 4148B |
Gas Turbine Engine Real Time Performance Model Presentation for Digital Computers |
|
SAE ARP 4155A |
Human Interface Design Methodology for Integrated Display Symbology |
|
SAE ARP 480B |
Nomenclature Guide for Propulsion Systems Support Equipment |
|
SAE ARP 4835 |
Aerospace Fluid Power-Hydraulic Thermal Expansion Relief Valves |
|
SAE ARP 4926A |
Alloy Verification and Chemical Composition Inspection of Welding Wire |
|
SAE ARP 4988 |
Procedure for Determining Thrust Wire Lengths and Minimum Insertion Depths |
|
SAE ARP 5287 |
Optical Measurement Procedures for Airborne Head Up Display (HUD) |
|
SAE ARP 5448/8A |
Plain Spherical Bearing Radial and Axial Clearance Measurement |
|
SAE ARP 5542 |
Hand Held Aircraft Tire Inflation Pressure Gauges |
|
SAE ARP 5637 |
Design and Maintenance Considerations For Aircraft Exterior Lighting Plastic Lenses |
|
SAE ARP 5824 |
Recommended Solid Film Lubricants for Fluid System Components |
|
SAE ARP 618A |
Boss Fittings, Metal Seal, Fluid Systems: General Requirements For |
|
SAE ARP 712B |
Galley Lighting |
|
SAE ARP 81490 |
Transmission Lines, Transverse Electromagnetic Mode-FSC 5985 |
|
SAE ARP 866A |
Standard Values of Atmospheric Absorption as a Function of Temperature and Humidity |
|
SAE ARP 996A |
Cooling Data for Turbine Engines in Helicopters |
|
SAE AS 102A |
FITTING, CROSS, REDUCER, FLARELESS AND SHORT FLARELESS-FSC 4730 |
|
SAE AS 115901 THRU AS 115950A |
(R) SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-28 UNF - 3A-FSC 5305 |
|
SAE AS 1367A |
Cross, Flared Tube for Seal Ring |
|
SAE AS 1371 |
Nuts, Self-Locking, Corrosion Resistant Steel High Strength, Prevailing Torque, All Metal 800 Degrees F (427 Degrees C) Use, UNJ Thread Form-Reaffirmed Noncurrent July 2004 |
|
SAE AS 14184 |
Nonmetallic Shaft-Coupling Details, Engine Driven Accessories-FSC 6115 |
|
SAE AS 1911C |
(R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO 90 DEGREE |
|
SAE AS 1959 |
Insert - Ring Locked, Fluid Connection Port Design, Installation and Removal of |
|
SAE AS 21429A |
(R) BEARING, ROLLER, ANTIFRICTION, ROD END, EXTERNAL THREAD, SELF-ALIGNING, AIR FRAME, -67 DEGREES F, TO 350 DEGREES F TYPE 1, HEAVY DUTY, SEALED-FSC 3110 |
|
SAE AS 21935 |
FITTING END, BOLT CLUSTER FITTING, DOUBLE PORT, THROUGH, FLARELESS-FSC 4730; Should Be Used Instead of MS21935C, Which Was Cancelled on 07 September 1999 |
|
SAE AS 25436A |
TERMINAL-LUG, CRIMP STYLE, 90° UPRIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1-FSC 5940 |
|
SAE AS 3001 |
PLUG, MACHINE THREAD - AMS 5646, METAL GASKET, SILVER PLATED, REDUCED DIAMETER THREAD |
|
SAE AS 3072B |
(R) GASKET - 37 degrees FLARED TUBE FITTING, COPPER, AMS 4500 |
|
SAE AS 3106 |
Screw, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, CRES AMS 5731, .164-36 UNJF-3A- |
|
SAE AS 3107 |
Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, CRES AMS 5731, .190-32 UNJF-3A |
|
SAE AS 3110 |
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, CRES AMS 5731, .375-24 UNJF-3A-FSC 5306 |
|
SAE AS 3174 |
Bolt, Machine - Double Hex Extended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .190-32 UNJF-3A |
|
SAE AS 33391 |
PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS-FSC 5975 |
|
SAE AS 3544 |
Stud, Locked in, Key Locked, UNS S66286, 140 ksi/1200 Degrees F, Heavy-Duty, Self-Broaching Keys-FSC 5340 |
|
SAE AS 3577 |
Pin, Spring - Tubular, Coiled, Standard Duty, UNS N07718-FSC 5315 |
|
SAE AS 3584 |
Pin and Plug, Expansion, Kit Cres, 416, Long-FSC 5340 |
|
SAE AS 39029/104 |
Contacts, Electrical Connector, Concentric Twinax, Pin, Shielded, Size 8 (for MIL-C-28840)-FSC 5935 |
|
SAE AS 39029/14 |
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, (For MIL-C-81511 Series 2 Connectors)-FSC 5935 |
|
SAE AS 39029/50 |
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (for MIL-C-83733 Connectors)-FSC 5935 |
|
SAE AS 392C |
Altimeter, Pressure Actuated Sensitive Type-Use SAE AS 8009 |
|
SAE AS 40401 |
Solenoid, Electrical, General Specification for |
|
SAE AS 407C |
Fuel Flowmeters |
|
SAE AS 4108/1 |
T-BOLT, A-286, 1000°F |
|
SAE AS 4111 |
Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals |
|
SAE AS 4217 |
Fitting, Adapter, Beam Seal, Bulkhead, External Swage Tube End, Hydraulic, 3000 psi |
|
SAE AS 4218 |
FITTING, ELBOW, 45°, BEAM SEAL, EXTERNAL THREAD, EXTERNAL SWAGE TUBE END, HYDRAULIC, 3000 psi |
|
SAE AS 4349 |
Coupling, Tube |
|
SAE AS 4472B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45° TO 45° |
|
SAE AS 4491 |
Plastic Disposable Cartridge, Plunger, Nozzles and Cartridge Assembly |
|
SAE AS 4626B |
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F, 3000 psi Flareless, Titanium Fittings, Including Jump Size, Straight to 90 Degrees-FSC 4720 |
|
SAE AS 4668A |
Fitting, Elbow, 90 Degrees, Short Flareless-FSC 4730 |
|
SAE AS 4673A |
Fitting, Tee, Bulkhead on Side, Short Flareless-FSC 4730 |
|
SAE AS 4675 |
Tee Assembly, Retained Nut on Side, Short Flareless-FSC 4730 |
|
SAE AS 4705B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45° MALE |
|
SAE AS 4751/2 |
FLANGE, SHEET METAL, WIDE-FSC 5342 |
|
SAE AS 4797B |
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to 45° Male |
|
SAE AS 4803B |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 90° FEMALE |
|
SAE AS 4959 |
Bolts and Screws, Steel, UNS S66286 Tensile Strength 140 ksi 1650 °F Solution Heat Treatment Aged Before Fillet and Thread Rolling Procurement Specification |
|
SAE AS 4983 |
Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy, Procurement Specification for-FSC 5315; UNS N07718 |
|
SAE AS 5012 |
FITTING, SLEEVE, STRAIGHT, FLARED, EXTERNAL SWAGE, HYDRAULIC |
|
SAE AS 506 |
High Temperature Insulated Terminals & Splices |
|
SAE AS 523A |
Flange Accessory 4.125 Pilot Diameter - QAD-Reaffirmed Noncurrent October 2001 |
|
SAE AS 5258/1 |
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight |
|
SAE AS 5258/8 |
Insulating Components, Molded, Electrical, Heat Shrinkable, Strain Relief and Sealing, Y |
|
SAE AS 5276/1 |
Performance Standard for Child Restraint Systems in Transport Category Airplanes |
|
SAE AS 5402 |
Design and Performance Criteria Aircraft Crash Axes |
|
SAE AS 5447 |
Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination |
|
SAE AS 5503A |
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS TO FIXED CAVITY, POTABLE WATER |
|
SAE AS 5590/1 |
CONNECTOR, FIBER OPTIC, CIRCULAR, ENVIRONMENT RESISTANT, REMOVEABLE TERMINI-FSC 5935 |
|
SAE AS 5604 |
Compass; Magnetic, Pilot´s Standby-FSC 6605; Should Be Used Instead of MIL-C-5604B, Which Was Cancelled on 31 August 1999 |
|
SAE AS 5756/2 |
CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, SINGLE CONDUCTOR, OZONE RESISTANT-FSC 6145 |
|
SAE AS 5901 |
Water Spray and High Humidity Endurance Test Methods for SAE AMS 1424 and SAE AMS 1428 Aircraft Deicing/Anti-icing Fluids |
|
SAE AS 5971A |
FITTING ASSEMBLY, ELBOW, 45°, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
|
SAE AS 6011 |
Cylinders, Carbon Dioxide Filled, Technical-FSC 4220; Should Be Used Instead of MIL-C-601G(1), Which Was Cancelled on 07 September 1999 |
|
SAE AS 6882 |
Water Repellent, Window and Windshield, Glass and Plastic-FSC 6850; Should Be Used Instead of MIL-W-6882F, Which Was Cancelled on 30 September 1999 |
|
SAE AS 7110/7D |
Nadcap Requirements for Rotational Friction/Inertia Welding |
|
SAE AS 7112/3 |
Nadcap Requirements for Couplings and Formed Sheet Metal Components |
|
SAE AS 7235 |
Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for-FSC 5320; |
|
SAE AS 756B |
(R) Fitting End Assembly, Universal, Design Standard |
|
SAE AS 8005A |
Minimum Performance Standard Temperature Instruments |
|
SAE AS 8013A |
Minimum Performance Standard for Direction Instrument, Magnetic (Gyroscopically Stabilized) |
|
SAE AS 8016A |
Vertical Velocity Instrument (Rate-of- Climb) |
|
SAE AS 8026A |
Crewmember Demand Oxygen Mask for Transport Category Aircraft |
|
SAE AS 81021A |
Copper-Beryllium Alloy (Copper Alloy Numbers C17500 and C17510), Strip |
|
SAE AS 81044/5 |
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated Copper, Normal Weight, 600-Volt, 150 Degrees Celsius |
|
SAE AS 81044/8 |
WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED COPPER, MEDIUM WEIGHT, 600-VOLT, 150°C |
|
SAE AS 81714/19 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 16, Series I-FSC 5940 |
|
SAE AS 81714/20 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 12, Series I-FSC 5940 |
|
SAE AS 81714/9 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 12, Series I-FSC 5940 |
|
SAE AS 81822/5 |
WIRE, ELECTRICAL, SOLDERLESS WRAP, FLUOROCARBON POLYIMIDE TAPE AND POLYTETRAFLUOROETHYLENE (PTFE) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145 |
|
SAE AS 85049/123A |
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90° SELF-LOCKING, AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935 |
|
SAE AS 85049/133 |
CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, 90°, SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999 SERIES III & SAE AS5590/1 CONNECTORS-FSC 5935 |
|
SAE AS 85049/142 |
CONNECTOR ACCESSORIES, ELECTRICAL BOOTS AND SLEEVES, TRANSITIONS, HEAT-SHRINKABLE, CATEGORY 9-FSC 4030 |
|
SAE AS 85188 |
Riveter, Power, Pneumatic-Hydraulic Blind Rivet Installation-FSC 5130 |
|
SAE AS 85449/2 |
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, PHOSPHATE ESTER FLUID RESISTANT |
|
SAE AS 894B |
Fitting, Tee, Standard and Reducer, Flareless Tube to Pipe on Run, External Thread |
|
SAE AS 9205B |
Gasket - Metal O-Ring, .125 Tube x .010 Wall, Cres - UNS S32100-FSC 5330 |
|
SAE AS 9216A |
(R) SCREW, MACHINE - STEEL, DIFFUSED NICKEL - CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A-FSC 5305 |
|
SAE AS 9230 |
BRACKET, ANGLE, 90° .190 x .312 BOLT |
|
SAE AS 9306A |
(R) STUD, SHOULDERED, STEPPED, HEX., WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3125-24 UNF-3A-FSC 5307 |
|
SAE AS 9311A |
(R) STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3125-24 UNF-3A-FSC 5307 |
|
SAE AS 9371B |
GASKET - METAL O-RING, .035 TUBE X .006 WALL, SILVER PLATED, CRES - UNS S32100-FSC 5330 |
|
SAE AS 9441A |
(R) BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A-FSC 5306 |
|
SAE AS 9468 |
PIN, STRAIGHT, HEADED .497 DIAMETER, AMS 5735-FSC 5315 |
|
SAE AS 9523B |
BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A |
|
SAE AS 9528A |
SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A |
|
SAE AS 9572A |
(R) Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 KSI Min, .1380-40 UNJF-3A |
|
SAE AS 9586B |
(R) Bolt, Machine - Hexagon, Drilled, 6 Holes, Full Shank, Corrosion and Heat Resistant Steel, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A-FSC 5306 |
|
SAE AS 9588A |
(R) Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi Min, .5000-20 UNJF-3A |
|
SAE AS 9633 |
Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS 4967, .190-32 UNJF-3A |
|
SAE AS 9679A |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A |
|
SAE AS 9772 |
Packing, Preformed - AMS 3617, |
|
SAE AS 9890A |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CRES UNS S41800, .5000-20 UNJF-3A |
|
SAE MA 1759A |
Center Hole, Metric |
|
SAE MA 1806 |
Spring Clips and Cushion Selection for Metal Tube Support, Metric-FSC 5340 |
|
SAE MA 2110A |
Port, Ring Locked Design Standard Dimensions for-FSC 4730 |
|
SAE MA 2521 |
Nut, Plain, Hexagon, Port Fitting Connector, AMS 5639, MJ Thread, Metric-FSC 5310 |
|
SAE MA 3275 |
NUT - SELF-LOCKING, CLINCH, SERRATED SHANK, 650 °C, SILVER PLATED, UNS S66286, MJ THREAD, METRIC-FSC 5310 |
|
SAE MA 3294 |
Clip - Spring, Tension, Outer 5.5 mm Bolt Hole, AMS 5525, Metric-FSC 5340 |
|
SAE MA 3354A |
Nut, Plain Hex - Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric-FSC 5310; UNS G87400; Reaffirmed Non-current May 2006 |
|
SAE MA 3433 |
Nut, Self Locking - Shank UNS N07001, Silver Plate, MJ Thread, Metric-FSC 5310; UNS N07001 |
|
SAE MA 3438 |
Spacer, Sleeve - for 6mm Bolt, AMS4901 or AMS4921, Metric-FSC 5365 |
|
SAE MA 3441 |
Washer-Key, Cup Lock, AMS 5510, Metric-FSC 5310 |
|
SAE MA 4035 |
Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specification For, Metric |
|
SAE MA 4044 |
Nut, Spanner - End Slots, Cupwasher Locked, UNS S66286, Silver Plated, MJ Thread, Metric-FSC 5310 |
|
SAE MA 4811 |
Insert - Thin Wall, Self-Locking, Metric Short and Long Length Installation and Removal of |
|
SAE AIR 1076 |
Aircraft Fire Protection for Reciprocating and Gas Turbine Engine Installations |
|
SAE AIR 1116A |
Fluid Properties |
|
SAE AIR 1151 |
Flight Compartment Glare |
|
SAE AIR 1221 |
Electromagnetic Compatibility (EMC) System Design Checklist |
|
SAE AIR 1336A |
Vehicle Electrical Systems |
|
SAE AIR 1660B |
Fuel Level Control Valves/Systems |
|
SAE AIR 171D |
Glossary of Technical and Physiological Terms Related to Aerospace Oxygen Systems |
|
SAE AIR 1749 |
Aircraft Engine Fuel Feed and Transfer Component Pressure Definitions |
|
SAE AIR 1811A |
Liquid Cooling Systems |
|
SAE AIR 1823A |
(R) Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS |
|
SAE AIR 1850A |
Twin Engine Helicopter Power Requirements |
|
SAE AIR 4172 |
HELICOPTER ENGINE MOUNTING |
|
SAE AIR 4394 |
Vacuum Investment Cast PH13-8Mo Corrosion Resistant Steel |
|
SAE AIR 4827 |
Modeling Techniques for Jet Engine Test Cell Aerodynamics |
|
SAE AIR 4964 |
Titanium Alloy Bars, Wire, Forgings, and Rings 4.5Al - 3V - 2Fe - 2Mo Annealed |
|
SAE AIR 5464 |
Metal Clad Fibers for Electrical Shielding & Harness Overbraid |
|
SAE AIR 787A |
(R) Filter-Element Cleaning Methods |
|
SAE ARD 4461 |
ASSEMBLY AND SOLDERING CRITERIA FOR HIGH QUALITY/HIGH RELIABILITY SOLDERED WIRE AND CABLE TERMINATION IN AEROSPACE VEHICLES |
|
SAE ARP 1088A |
Aircraft Indicating Systems |
|
SAE ARP 1107B |
Tail Bumpers for Piloted Aircraft |
|
SAE ARP 1287A |
SAE Standards for Use in the Design of Aerospace Vehicular Ground Equipment |
|
SAE ARP 1315D |
(R) Safety Considerations for Airplane Lavatories |
|
SAE ARP 1323A |
Type Measurements of Airplane Interior Sound Pressure Levels During Cruise |
|
SAE ARP 1350 |
Installation and Mounting of Singlehole Mount, Cylindrical, Electrical Connectors, Procedure for |
|
SAE ARP 1372B |
Minimum Requirements for Air Cargo Unit Load Device Ground Handling and Transport Systems |
|
SAE ARP 159A |
Dielectric Testing of Spark Plugs |
|
SAE ARP 4101/3 |
Crew Rest Facilities |
|
SAE ARP 4102/3 |
Flight Deck Tire Pressure Monitoring System (TPMS) |
|
SAE ARP 4102/9A |
Flight Management System (FMS) |
|
SAE ARP 4104/1 |
Flight Envelope Awareness/Protection |
|
SAE ARP 4769A |
Crew Rest Container for Main Deck or Lower Deck |
|
SAE ARP 4791A |
Human Engineering Recommendations for Data Link Systems |
|
SAE ARP 4865 |
GAS TURBINE ENGINE FUEL NOZZLE TEST PROCEDURES |
|
SAE ARP 5021 |
Oxygen Cylinder Installation Guide |
|
SAE ARP 5257 |
Tire Overspeed Landing Test |
|
SAE ARP 5298 |
Aircraft Fueling Adapter Wear Limits |
|
SAE ARP 5430 |
Human Interface Criteria for Vertical Situation Awareness Displays |
|
SAE ARP 5621 |
Electronic Display of Aeronautical Information (Charts) |
|
SAE ARP 583H |
Flight Attendant Stations |
|
SAE ARP 5890 |
Guidelines for Preparing Reliability Assessment Plans for Electronic Engine Controls |
|
SAE ARP 711A |
Illuminated Signs |
|
SAE ARP 726A |
Universal Leak Detector |
|
SAE ARP 731C |
(R) General Requirements for Application of Vapor Cycle Refrigeration Systems for Aircraft |
|
SAE ARP 798A |
(R) Design Criteria for White Incandescent Lighted Aerospace Instruments |
|
SAE ARP 846 |
Low Tension Spark Igniter Sparking Voltage Test |
|
SAE AS 10380 |
Coupling Installations, Standard Conduit, Electrical-FSC 5975 |
|
SAE AS 1065 |
Quality & Serviceability Requirements for Aircraft Cylinder Assemblies Charged with Aviator´s Breathing Oxygen |
|
SAE AS 1130F |
Air and Air/Surface (Platform) Cargo Pallets |
|
SAE AS 125851 THRU AS 125875B |
(R) PLUG - PIPE, CADMIUM PLATED, STEEL UNS G87400, COUNTERSUNK HEX |
|
SAE AS 1426A |
Standard Galley System Specification Part I, Performance, Design, Development |
|
SAE AS 15532 |
Data Word and Message Formats |
|
SAE AS 1560A |
Modules and Basic Racks of Metric Spur and Helical Gears |
|
SAE AS 1585C |
FITTING, REDUCER, INTEGRAL WELD RING, 3000 PSI-FSC 4730 |
|
SAE AS 1831A |
Electrical Power, 270 V DC, Aircraft, Characteristics and Utilization of |
|
SAE AS 1974 |
Clamps, Support, Comparative Fatigue Strengths, Test Method |
|
SAE AS 21432A |
(R) BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL STUD, TYPE VII, ANTIFRICTION, INCH |
|
SAE AS 22074 |
CIRCUIT BREAKER, RECYCLING, TRIP-FREE, PUSH-PULL, 1/2 THRU 5 AMPERE, TYPE I-FSC 5925 |
|
SAE AS 25435A |
TERMINAL-LUG, CRIMP STYLE, STRAIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1-FSC 5940 |
|
SAE AS 25481 |
Cable Assemblies, Electric Power, for Portable Ground Support Test Equipment |
|
SAE AS 3083 |
Insert - CRES Helical Coil Fine Thread, Straight Stud Locking, 3 Dia Nom Length-FSC 5340 |
|
SAE AS 3109 |
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, CRES AMS 5731, .3125-24 UNJF-3A-FSC 5306 |
|
SAE AS 31371A |
CONNECTOR, PLUG, ELECTRIC, SOLDER TYPE, PUSH-PULL COUPLING SERIES 1 (CLASS E, P AND J)-FSC 5935 |
|
SAE AS 3139A |
STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS 5731 .250-28 UNJF-3A X .190-32 UNJF-3A-FSC 5307; Reaffirmed Noncurrent July 2004 |
|
SAE AS 3179 |
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CL TOL SHANK, AMS 5643, .500-20, UNJF-3A |
|
SAE AS 3180 |
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CL TOL SHANK, AMS 5643, .5625-18 UNJF-3A |
|
SAE AS 3246B |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A |
|
SAE AS 34561 |
Connectors, Plug, Electrical, Rear Release, Crimp Contact, AN Type-FSC 5935 |
|
SAE AS 3550 |
Assembly Nut, Plate, Removable Self-Locking Nut-FSC 5310 |
|
SAE AS 38386/1A |
(R) CONNECTOR, AIR DUCT HOSE, GROUND COOLING, MALE |
|
SAE AS 39029/108 |
Contacts, Electrical Connector, Pin, Crimp Removable, Socket, Single Wire-FSC 5935 |
|
SAE AS 39029/51 |
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (for MIL-C-83733 Connectors)-FSC 5935 |
|
SAE AS 4112 |
Production Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals |
|
SAE AS 4202A |
Adapter - Port Connection, Ring Locked Design, Installation and Removal of 8000 psi Systems |
|
SAE AS 4341 |
Wire, Retaining for Retained Nut |
|
SAE AS 4346 |
Union Assembly, Adjustable End |
|
SAE AS 4542 |
Elbow, 90 Degrees, Beam Seal, Male 4000 psi, Hydraulic-FSC 4730 |
|
SAE AS 4625B |
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F, 3000 psi Flareless, Titanium Fittings, Including Jump Size, Straight to 45 Degrees-FSC 4720 |
|
SAE AS 4642 |
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 4000 psi, FLARED, STRAIGHT TO STRAIGHT, CRES FITTINGS-FSC 4720 |
|
SAE AS 4669A |
Fitting, Elbow, 90 Degrees, Bulkhead, Short Flareless-FSC 4730 |
|
SAE AS 4677A |
Fitting, Tee, Bulkhead on Run, Boss on Side, Short Flareless-FSC 4730 |
|
SAE AS 4706B |
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to 90° Male |
|
SAE AS 483B |
Skid Control Equipment |
|
SAE AS 4984 |
Coating Requirements for Aerospace Hand Tools |
|
SAE AS 50151 |
Connectors, Electrical, Circular Threaded, AN Type, General Specification For-FSC 5935 |
|
SAE AS 5072/1A |
Coupling Assembly, .375 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Disconnect for Ethylene/Glycol/ Water |
|
SAE AS 5072C |
Coupling Assemblies, Non-Locking Probe Style, Miniature Self-Aligning, Self-Sealing Disconnects |
|
SAE AS 50861/3 |
Wire, Electrical, Polyvinyl Chloride Insulated, PVC-Glass-PVC-Nylon, Tin-Coated Copper Conductor, 600-Volt, 105°C |
|
SAE AS 5258/2 |
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle |
|
SAE AS 5419/1 |
WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREES C |
|
SAE AS 5419/5 |
WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN), THERMOCOUPLE EXTENSION, 200 DEGREES C |
|
SAE AS 5461A |
HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45 DEGREE TO 45 DEGREE |
|
SAE AS 5531 |
UNION, SHORT FLARELESS TUBE FITTING, INTERNALLY SWAGED-FSC 4730 |
|
SAE AS 5973 |
FITTING ASSEMBLY, CROSS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI-FSC 4730 |
|
SAE AS 632C |
HOSE ASSEMBLY, 3000 psi, PTFE, FLARED, 90° TO 90°, HEAVYWEIGHT-FSC 4720 |
|
SAE AS 640 |
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, STRAIGHT TO STRAIGHT |
|
SAE AS 648B |
(R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO 45° |
|
SAE AS 650B |
(R) Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 45 Degrees to 45 Degrees |
|
SAE AS 654 |
Cable, Special Purpose, Electrical: Wire, Electrical (Ignition, High-Tension) |
|
SAE AS 7110/10A |
National Aerospace and Defense Contractors Accreditation Program Requirements for Foundry In-Process Welding of Castings |
|
SAE AS 7234 |
Rivets, Blind, Corrosion Resistant Alloy 67Ni - 31Cu Procurement Specification For-FSC 5320; UNS N04405; Supersedes AMS 7234D |
|
SAE AS 7365 |
Duct Assembly, Ground, Conditioned Air, Metallic Reinforced, Low Pressure, 350 Degrees F |
|
SAE AS 7974/4 |
CABLE ASSEMBLY, EXTERNAL ELECTRIC POWER, AIRCRAFT, SINGLE-JACKETED 115/200 VOLT, 400 HERTZ-FSC 6150 |
|
SAE AS 8015B |
Minimum Performance Standards for Parachute Assemblies and Components, Personnel |
|
SAE AS 8027 |
Crew Member Oxygen Regulators, Demand |
|
SAE AS 8040A |
Heater, Aircraft Internal Combustion Heat Exchanger Type |
|
SAE AS 8045 |
Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self- Powered) |
|
SAE AS 81582/6 |
CONNECTOR, ADAPTER ASSEMBLY, UMBILICAL CABLE TO STORES INTERFACE LANYARD RELEASE-FSC 5935 |
|
SAE AS 81659/35 |
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (DUAL INSERT, TYPE II, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935 |
|
SAE AS 81714/30 |
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Sizes 20-3, 20-4, 20-5 Vertical Mounting with Integral Bracket, Series I-FSC 5940 |
|
SAE AS 85049/121A |
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935 |
|
SAE AS 85352 |
Inflator Assembly and Gage Elements, Pneumatic Pressure, Remote Control, Direct Reading-FSC 4920 |
|
SAE AS 85449/5 |
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FIRE RESISTANCE, LOW SMOKE DENSITY AND TOXICITY |
|
SAE AS 8662 |
Knife, Hunting, Sheathed, Survival, Pilot´s-FSC 7340; Should Be Used Instead of MIL-K-8662E(1), Which Was Cancelled on 30 August 1999 |
|
SAE AS 9144A |
(R) Gasket - Type XX Engine Accessory Drive-FSC 5330 |
|
SAE AS 91721A |
(R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 KSI MIN .3750-24 UNF-3A |
|
SAE AS 9312A |
(R) STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A-FSC 5307 |
|
SAE AS 94A |
Snap Ring, Non-Controllable Propeller Hub |
|
SAE AS 9587A |
(R) Bolt, Machine-Hexagon Head, Drilled 6 Holes, Full Shank, UNS S66286, 130 ksi Min, .4375-20 UNJF-3A |
|
SAE AS 9599A |
(R) BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .375 BOLT-FSC 5340 |
|
SAE AS 965B |
Drive-Studded, Accessory, (203.2) 8.000 BC Round, Design Standard For |
|
SAE AS 971B |
Drive-Accessory, (254) 10.000 BC Round, QAD, Design Standard for |
|
SAE AS 9761 |
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Titanium AMS 4967, .3125-24 UNJF-3A-FSC 5306 |
|
SAE AS 9786 |
Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .375-24 UNJF-3A-FSC 5306 |
|
SAE AS 9928A |
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A |
|
SAE JA1004 |
Software Supportability Program Standard |
|
SAE MA 1508 |
Undercuts for Straight Screw Threads - Metric |
|
SAE MA 2002A |
Impulse Testing of Hydraulic Hose, Tubing and Fitting Assemblies |
|
SAE MA 2036A |
Cap Assembly, Pressure Seal, Flareless Tube, Metric-FSC 4730 |
|
SAE MA 2150/5 |
CLAMP, LOOP STYLE, WITH INSERT, HYDROCARBON FLUID RESISTANT, METRIC |
|
SAE MA 2151/1 |
Clamp, Saddle Type, Cushioned, Hydrocarbon Fluid Resistant, Metric-FSC 5340 |
|
SAE MA 3304A |
Bolt-Machine, Hex Head, Drilled, PD Shank, MJ Thread, AMS 6322, Cadmium Plate, Metric-FSC 5306 |
|
SAE MA 3449 |
Bolt, Spline Drive Extended Washer Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric-FSC 5306 |
|
SAE MA 3520 |
Insert - Thin Wall, Short Self-Locking, 550 Degrees C, Silver Plated UNS N07718, MJ Thread, Metric-FSC 5340; UNS N07718 |
|
SAE MA 4187 |
BOLT, MACHINE, SPLINE DRIVE, SPECIAL EXTENDED WASHER, REDUCED HEAD, PD SHANK, AMS 5662, METRIC-FSC 5305; UNS N07718 |
|
SAE AIR 1069A |
Crew Oxygen Requirements Up to a Maximum Altitude of 45,000 Ft. |
|
SAE AIR 1087B |
Aircraft Accessory Drag Torque During Engine Starts |
|
SAE AIR 1266A |
Fault Isolation in Environmental Control Systems of Commercial Transports |
|
SAE AIR 1276A |
Aircraft Flashtube Anticollision Lighting Systems |