|
SAE J1442 |
(R) High-Strength, Hot-Rolled Steel Bars |
|
SAE J1677 |
(R) Tests and Procedures for Steel and Copper Nickel Tubing |
|
SAE J1681 |
(R) Gasoline, Alcohol, and Diesel Fuel Surrogates for Material Testing |
|
SAE J2030 |
Heavy-Duty Electrical Connector Performance Standard |
|
SAE J2178-1 |
Class B Data Communication Network Messages Detailed Header Formats and Physical Address Assignments |
|
SAE J673 |
(R) Automotive Safety Glasses |
|
SAE J1603 |
Rubber Seals for Hydraulic Disc Brake Cylinders, Standard-January 1995 |
|
SAE J1699-2 |
OBD-II Related SAE Specification Verification Test Procedures |
|
SAE J1903 |
(R) Automotive Adaptive Driver Controls, Manual |
|
SAE J422 |
Microscopic Determination of Inclusions in Steels-December 1983 |
|
SAE J462 |
Cast Copper Alloys |
|
SAE J959 |
Lifting Crane, Wire-Rope Strength Factors-May 1991 |
|
SAE J1131 |
Performance Requirements for SAE J844 Nonmetallic Tubing and Fitting Assemblies Used in Automotive Air Brake Systems |
|
SAE J1238 |
Rating Lift Cranes on Fixed Platforms Operating in the Ocean Environment |
|
SAE J1570 |
(R) Rubber Dust Boots for the Hydraulic Disk Brake Piston |
|
SAE J1610 |
Test Method for Evaluating the Sealing Capability of Hose Connections with a PVT Test Facility |
|
SAE J1684 |
Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials |
|
SAE J1868 |
(R) Restricted Hardenability Bands for Selected Alloy Steels, Standard-September 1993 |
|
SAE J2178-3 |
Class B Data Communication Network MessagesPart 3 Frame IDs for Single-Byte Forms of Headers |
|
SAE J2422 |
Cab Roof Strength Evaluation - Quasi-Static Loading Heavy Trucks |
|
SAE J599 |
(R) Lighting Inspection Code |
|
SAE J1050 |
(R) Describing and Measuring the Driver's Field of View |
|
SAE J1165 |
Reporting Cleanliness Levels of Hydraulic Fluids, Recommended Practice |
|
SAE J1699-3 |
OBD II Compliance Test Cases |
|
SAE J2178-4 |
Class B Data Communication Network Messages Message Definitions for Three Byte Headers |
|
SAE J267 |
Wheels/Rims Performance Requirements and Test Procedures Truck and Bus |
|
SAE J643 |
Hydrodynamic Drive Test Code |
|
SAE J645 |
Automotive Transmission Terminology |
|
SAE J849 |
Connection and Accessory Locations for Towing Multiple Trailers |
|
SAE J377 |
Vehicular Traffic Sound Signaling Devices (Horns) |
|
SAE J510 |
Leaf Springs for Motor Vehicle Suspension - Made to Customary U.S. Units |
|
SAE J585 |
(R) Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less than 2032 mm in Overall Width |
|
SAE J896 |
Mounting Flanges for Engine Accessory Drives, Recommended Practice-May 1983 |
|
SAE J2006 |
Marine Exhaust Hose |
|
SAE J885 |
Human Tolerance to Impact Conditions as Related to Motor Vehicle Design |
|
SAE J1095 |
Spoke Wheels and Hub Fatigue Test Procedures |
|
SAE J1113-21 |
(R) Electronmagnetic Compatibility Measurement Procedure for Vehicle Components Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber |
|
SAE J114 |
(R) Seat Belt Hardware Webbing Abrasion Performance Requirements-June 1994 |
|
SAE J2254 |
Fluid Power Piping Cleaning Process, Information Report-September 1995 |
|
SAE J680 |
Location and Operation of Instruments and Controls in Motor Truck Cabs, Recommended Practice |
|
SAE J866 |
Friction Coefficient Identification System for Brake Linings |
|
SAE J89 |
Dynamic Cushioning Performance Criteria for Snowmobile Seats |
|
SAE J1516 |
Accommodation Tool Reference Point |
|
SAE J361 |
(R) Procedure for Visual Evaluation of Interior and Exterior Automotive Trim |
|
SAE J471D |
Sintered Powder Metal Parts: Ferrous-August 1973 |
|
SAE J583 |
(R) Front Fog Lamp-: 2006 |
|
SAE J618 |
Flywheels for Single-Plate Spring-Loaded Clutches-January 1991 |
|
SAE J1163 |
Determining Seat Index Point |
|
SAE J1173 |
Size Classification and Characteristics of Glass Beads for Peening, Recommended Practice-September 1988 |
|
SAE J1240 |
(R) Flywheel Spin Test Procedure |
|
SAE J1830 |
Size Classification and Characteristics of Ceramic Shot for Peening, Recommended Practice-May 1987 |
|
SAE J2139 |
Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width |
|
SAE J2575 |
Standardized Dent Resistance Test Procedure |
|
SAE J1469 |
Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers |
|
SAE J1574-2 |
Measurement of Vehicle and Suspension Parameters for Directional Control Studies - Rationale |
|
SAE J1615 |
Thread Sealants |
|
SAE J1857 |
Flywheel Dimensions for Truck and Bus Applications |
|
SAE J2329 |
Categorization and Properties of Low-Carbon Automotive Sheet Steels |
|
SAE J2430 |
Dynamometer Effectiveness Charactrization Test for Passenger Car and Light Truck Brake Friction Products |
|
SAE J835 |
Split Type Bushings - Design and Application, Standard; |
|
SAE J994 |
AlarmBackupElectric Laboratory Performance Testing |
|
SAE J1284 |
Blade Type Electric Fuses, Standard-April 1988 |
|
SAE J1393 |
(R) Heavy Duty Vehicle Cooling Test Code R-Supersedes SAE J819 |
|
SAE J2221 |
Standardized Symbols for Electrical Circuit Diagrams |
|
SAE J373 |
Housing Internal Dimensions for Single- and Two-Plate Spring-Loaded Clutches |
|
SAE J384 |
(R) Motor Vehicle Seat Belt Anchorages - Test Procedure-June 1994 |
|
SAE J586 |
(R) Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width |
|
SAE J678 |
Speedometers and Tachometers - Automotive, Recommended Practice |
|
SAE J732 |
Specification Definitions Loaders |
|
SAE J1019 |
Tests and Procedures for High Temperature Transmission Oil Hose, Engine Lubricating Oil Hose, and Hose Assemblies |
|
SAE J1113-12 |
Electrical Interference by Conduction and CouplingCapacitive and Inductive Coupling via Lines Other than Supply Lines |
|
SAE J1171 |
External Ignition Protection of Marine Electrical Devices |
|
SAE J2188 |
Commercial Truck and Bus SAE Recommended Procedure for Vehicle Performance Prediction and Charting |
|
SAE J2337-2 |
Connections for Fluid Power and High Pressure Use Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 2: Stud End Requirements, Dimensions, Design, and Test Methods |
|
SAE J420 |
Magnetic Particle Inspection-March 1991 |
|
SAE J501 |
Shaft Ends-May 1948 |
|
SAE J726 |
Air Cleaner Test Code- 6/2002, |
|
SAE J1384 |
Vibration Performance Evaluation of Operator Seats |
|
SAE J1699-1 |
SAE J1850 Verification Test Procedures |
|
SAE J2435 |
Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, and Beading |
|
SAE J2610 |
Serial Data Communication Interface |
|
SAE J4002 |
(R) H-Point Machine (HPM-II) Specifications and Procedure for H-Point DeterminationAuditing Vehicle Seats |
|
SAE J445 |
Metallic Shot and Grit Mechanical Testing |
|
SAE J485 |
Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins |
|
SAE J700 |
Upper Coupler Kingpin - Commercial Trailers and Semitrailers |
|
SAE J759 |
(R) Lighting Identification Code |
|
SAE J840 |
(R) Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining Assemblies |
|
SAE TSB 003 |
Rules for SAE Use of SI (Metric) Units |
|
SAE J1259 |
METRIC SPHERICAL ROD ENDS |
|
SAE J1312 |
Procedure for Mapping Engine Performance - Spark Ignition and Compression Ignition Engines, Standard; |
|
SAE J1488 |
Emulsified Water/Fuel Separation Test Procedure |
|
SAE J180 |
(R) Electrical Charging Systems for Off Highway Work Machines |
|
SAE J1946 |
Companion Flanges, Type A (External Pilot) and Type S (Internal Pilot) |
|
SAE J1953 |
Brake-Stroke Indicator Design Guideline for Cam or Disc Air-Brake Actuators |
|
SAE J2394 |
Seven Conductor Cable for ABS Power Truck and Bus |
|
SAE J415 |
(R) Definition of Heat Treating Terms-July 1995 |
|
SAE J56 |
(R) Road Vehicles - Alternators with Regulators - Test Methods and General Requirements |
|
SAE J1166 |
(R) Sound Measurement Off-Road Self-Propelled Work Machines Operator-Work Cycle |
|
SAE J1559 |
Measurement of Solar Heating Effect-July 1995 |
|
SAE J1889 |
L.E.D. Signal and Marking Lighting Devices |
|
SAE J2045 |
(R) Performance Requirements for Fuel System Tubing Assemblies |
|
SAE J2534-2 |
Optional Pass-Thru Features |
|
SAE J2670 |
Stability and Compatibility Criteria for Additives and Flushing Materials Intended for Use in Vehicle Air-Conditioning Systems Using R-134a |
|
SAE J457 |
Chemical Compositions, Mechanical Property Limits, and Dimensional Tolerances of SAE Wrought Aluminum Alloys-February 1991 |
|
SAE J551-11 |
Vehicle Electromagnetic Immunity - Off-Vehicle Source |
|
SAE J1102 |
(R) Mechanical and Material Requirements for Wheel Bolts, Standard-February 1995 |
|
SAE J1176 |
External Leakage Classifications for Hydraulic Systems, Recommended Practice |
|
SAE J1194 |
Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors |
|
SAE J1227 |
Assessing Cleanliness of Hydraulic Fluid Power Components and Systems |
|
SAE J1287 |
Measurement of Exhaust Sound Levels of Stationary Motorcycles |
|
SAE J1505 |
Brake Force Distribution Test ProcedureTrucks and Buses |
|
SAE J2578 |
Recommended Practice for General Fuel Cell Vehicle Safety |
|
SAE J2711 |
Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles |
|
SAE J383 |
(R) Motor Vehicle Seat Belt Anchorages - Design Recommendations-June 1995 |
|
SAE J448A |
Surface Texture-June 1963 |
|
SAE J466 |
Magnesium Wrought Alloys-April 1979 |
|
SAE J551-5 |
Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles, Broadband, 9 kHz to 30 MHz |
|
SAE J646 |
Planetary Gear(s) - Terminology-October 1969 |
|
SAE J670 |
(R) Vehicle Dynamics Terminology |
|
SAE J928 |
Electrical Terminals - Pin and Receptacle Type |
|
SAE J1122 |
Helical Springs: Specification Check Lists |
|
SAE J1487 |
Rating Air-Conditioner Evaporator Air Delivery and Cooling Capacities |
|
SAE J1497 |
Design Guide for Formed-In-Place Gaskets, Recommended Practice |
|
SAE J160 |
(R) Dimensional Stability of Friction Materials When Exposed to Elevated Temperatures |
|
SAE J1781 |
(R) Ship Systems and Equipment – Materials for Fluid Systems |
|
SAE J328 |
WheelsPassenger Car and Light Truck Performance Requirements and Test Procedures |
|
SAE J4004 |
Positioning the H-Point Design Tool Seating Reference Point and Seat Track Length |
|
SAE J576 |
Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices |
|
SAE J745 |
Hydraulic Power Pump Test Procedure |
|
SAE J98 |
Personnel Protection for General Purpose Industrial Machines |
|
SAE J1692 |
Valve Seat Insert Information Report, Information Report-Supersedes Ford ESE-M1A106-A, ESE-M1A122-A |
|
SAE J2181 |
Steady-State Circular Test Procedure for Trucks and Buses |
|
SAE J2223-2 |
(R) Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 2: Tests and General Performance Requirements |
|
SAE J942 |
(R) Passenger Car Windshield Washer Systems |
|
SAE J1013 |
Measurement of Whole Body Vibration of the Seated Operator of Off-Highway Work Machines |
|
SAE J1060 |
Subjective Rating Scale for Evaluation of Noise and Ride Comfort Characteristics Related to Motor Vehicle Tires |
|
SAE J1172 |
Engine Flywheel Housings with Sealed Flanges, Recommended Practice |
|
SAE J1580 |
Metric Countersunk Holes for Cutting Edges and End Bits, Standard-December 1989 |
|
SAE J1839 |
Coarse Droplet Water/Fuel Separation Test Procedure |
|
SAE J2180 |
Tilt Table Procedure for Measuring the Static Rollover Threshold for Heavy Trucks |
|
SAE J2318 |
Air Brake Actuator Test Performance Requirements Truck and Bus |
|
SAE J2321 |
Ship Systems and EquipmentGeneral Specification for Filter ElementsHydraulic and Lube Oil Service |
|
SAE J240 |
Life Test for Automotive Storage Batteries |
|
SAE J2501 |
Round, Screened and Unscreened, 60 V and 600 V Multi-Core Sheathed Cables |
|
SAE J2512 |
Towing Equipment Ratings and Practices |
|
SAE J2522 |
Dynamometer Global Brake Effectiveness |
|
SAE J2613 |
Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending |
|
SAE J2650 |
Performance Requirements for Light Emitting Diode (LED) Road Illumination Device Systems |
|
SAE J2791 |
HFC-134a Refrigerant Electronic Leak Detectors, Minimum Performance Criteria |
|
SAE J378 |
(R) Marine Propulsion System Wiring |
|
SAE J551-16 |
Electromagnetic ImmunityOff-Vehicle Source (Reverberation Chamber Method) Part 16Immunity to Radiated Electromagnetic Fields |
|
SAE J986 |
Sound Level for Passenger Cars and Light Trucks |
|
SAE J1113-4 |
(R) Immunity to Radiated Electromagnetic FieldsBulk Current Injection (BCI) Method |
|
SAE J1454 |
Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines |
|
SAE J1772 |
(R) SAE Electric Vehicle Conductive Charge Coupler |
|
SAE J313 |
Diesel Fuels |
|
SAE J365 |
Method of Testing Resistance to Scuffing of Trim Materials |
|
SAE J387 |
(R) Terminology - Motor Vehicle Lighting |
|
SAE J390 |
(R) Dual Dimensioning Engineering Drawings |
|
SAE J544 |
(R) Electric Starting Motor Test Procedure |
|
SAE J701 |
Truck Tractor Semitrailer Interchange Coupling Dimensions, Information Report-August 1984 |
|
SAE J817-2 |
Engineering Design Serviceability Guidelines - Construction and Industrial Machinery - Maintainability Index - Off-Road Work Machines, Information Report-March 1991 |
|
SAE J90 |
Standard Classification System for Nonmetallic Automotive Gasket Materials |
|
SAE J1144 |
Towed Vehicle Drivetrain Test Procedure Passenger Cars, Vans, and Light-Duty Trucks |
|
SAE J1343 |
(R) Information Relating to Duty Cycles and Average Power Requirements of Truck and Bus Engine Accessories |
|
SAE J1490 |
Measurement and Presentation of Truck Ride Vibrations, Recommended Practice-January 1987 |
|
SAE J2302 |
Thermal Effectiveness of Sleeve Insulation |
|
SAE J2602-1 |
LIN Network for Vehicle Applications |
|
SAE J863 |
Methods of Determining Plastic Deformation in Sheet Metal Stampings, Recommended Practice |
|
SAE J1817 |
Long-Stroke Air-Brake Actuator Marking |
|
SAE J2202 |
(R) Heavy-Duty Wiring Systems for On-Highway Trucks |
|
SAE J2271M |
Ship Systems and Equipment - Part Standard for Studs - Continuous and Double End (Metric) |
|
SAE J2301 |
Universal Joint End Yoke Connection (Earwork) |
|
SAE J379 |
(R) Gogan Hardness of Brake Lining |
|
SAE J548-1 |
(R) Spark Plugs |
|
SAE J847 |
Trailer Tow Bar Eye and Pintle Hook/ Coupler Performance, Recommended Practice-November 1987 |
|
SAE J930 |
(R) Storage Batteries for Off-Road Self-Propelled Work Machines, Standard-June 1995 |
|
SAE J1044 |
(R) World Manufacturer Identifier |
|
SAE J1309 |
Travel Performance and Rating Procedure, Crawler Mounted Hydraulic Excavators, Material Handlers, Knuckle Boom Log Loaders, and Certain Forestry Equipment |
|
SAE J133 |
(R) Fifth Wheel Kingpin PerformanceCommercial Trailers and Semitrailers |
|
SAE J1452 |
Trailer Grade Parking Performance Test Procedure |
|
SAE J151 |
Pressure Relief for Cooling System |
|
SAE J1637 |
Laboratory Measurement of the Composite Vibration Damping Properties of Materials on a Supporting Steel Bar |
|
SAE J1648 |
Protective Coatings for Fasteners, Information Report-August 1996 |
|
SAE J2321-3 |
Disposable Hydraulic Filter Elements - 21 MPa Collapse Pressure, Filtration Ratio = 75 at 10 um, 75 to 175 L/Min |
|
SAE J2609 |
Multi-Dimensional Thermal Properties of Insulated Heat Shield Material Systems |
|
SAE J4003 |
H-Point Machine (HPM-II)Procedure for H-Point DeterminationBenchmarking Vehicle Seats |
|
SAE J541 |
(R) Voltage Drop for Starting Motor Circuits-October 1996 |
|
SAE J800 |
(R) Motor Vehicle Seat Belt Assembly Installation, Recommended Practice-June 1994 |
|
SAE J1008 |
Sound Measurement - Self- Propelled Agricultural Equipment - Exterior |
|
SAE J1113-24 |
Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz Crawford TEM Cell and 10 kHz to 5 GHzWideband TEM Cell |
|
SAE J1367 |
Performance Test Procedure - Ball Joints and Spherical Rod Ends, Standard-September 1981 |
|
SAE J2175 |
Specifications for Low Carbon Cast Steel Shot, Recommended Practice-June 1991 |
|
SAE J2411 |
Single Wire CAN Network for Vehicle Applications |
|
SAE J2503 |
Drawbar Pull Performance Criteria |
|
SAE J257 |
(R) Brake Rating Horsepower Requirements-Commercial Vehicles |
|
SAE J2616 |
Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System |
|
SAE J266 |
Steady-State Directional Control Test Procedures for Passenger Cars and Light Trucks |
|
SAE J294 |
Service Brake Structural Integrity Test ProcedureVehicles Over 4500 kg (10 000 lb) GVWR |
|
SAE J426 |
Liquid Penetrant Test Methods-March 1991 |
|
SAE J449A |
Surface Texture Control-June 1963 |
|
SAE J468 |
Zinc Alloy Ingot and Die Casting Compositions-December 1988 |
|
SAE J49 |
Specification Definitions - Hydraulic Backhoes-April 1980 |
|
SAE J551-15 |
(R) Vehicle Electromagnetic Immunity - Electrostatic Discharge (ESD) |
|
SAE J845 |
(R) Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles |
|
SAE J1102M |
Mechanical and Material Requirements for Metric Wheel Bolts |
|
SAE J1213-1 |
(R) Glossary of Vehicle Networks for Multiplexing and Data Communications |
|
SAE J1524 |
(R) Method of Viscosity Test for Automotive Type Adhesives, Sealers, and Deadeners, Recommended Practice-August 1995 |
|
SAE J156 |
Fusible Links |
|
SAE J169 |
Design Guidelines for Air Conditioning Systems for Off-Road Operator Enclosures-March 1985 |
|
SAE J1704 |
Borate Ester Based Brake Fluids |
|
SAE J1802 |
Brake Block Effectiveness Rating |
|
SAE J1810 |
(R) Electrical Indicating System Specification |
|
SAE J1842 |
(R) Disc Wheel Hub/Spoke Wheel and Axle Interface DimensionsCommercial Vehicles |
|
SAE J2337-3 |
Connections for Fluid Power and High Pressure UsePorts, Stud Ends, and Plugs with ISO 261 Threads and O-Ring SealingPart 3: Port Plug Requirements, Dimensions, Design, and Test Methods |
|
SAE J619 |
Flywheels for Two-Plate Spring-Loaded Clutches-December 1993 |
|
SAE J810 |
(R) Classification of Common Surface Imperfections in Sheet Steel, Information Report-March 1996 |
|
SAE J848 |
Fifth Wheel Kingpin, Heavy-Duty - Commercial Trailers and Semitrailers |
|
SAE J1291 |
(R) Automotive Hydraulic Brake SystemMetric Banjo Bolt Connections |
|
SAE J1374 |
Hydraulic Cylinder Rod Seal Endurance Test Procedure, Recommended Practice-May 1985 |
|
SAE J1434 |
Wrought Aluminum Applications Guidelines, Information Report;-June 1983 |
|
SAE J1475 |
Hydraulic Hose Fitting for Marine Applications |
|
SAE J1814 |
Operator ControlsOff-Road Machines |
|
SAE J184 |
(R) Qualifying a Sound Data Acquisition System |
|
SAE J1938 |
(R) Design/Process Checklist for Vehicle Electronic Systems |
|
SAE J2412 |
Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus |
|
SAE J2497 |
Power Line Carrier Communications for Commercial Vehicles |
|
SAE J2788 |
HFC-134a (R-134a) Recovery/Recycling Equipment and Recovery/Recycling/Recharging for Mobile Air-Conditioning Systems |
|
SAE J2797 |
Power Cylinder Blow-By: Blow-By Mechanisms |
|
SAE J592 |
Sidemarker Lamps for Use on Road Vehicles Less Than 2032 mm in Overall Width |
|
SAE J855 |
Test Method of Stretch and Set of Textiles and Plastics |
|
SAE J927 |
Flywheels for Engine-Mounted Torque Converters, Recommended Practice |
|
SAE J1339 |
(R) Test Method for Measuring Power Consumption of Engine Cooling Fans |
|
SAE J1495 |
Test Procedure for Battery Flame Retardant Venting Systems |
|
SAE J1562 |
Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited) Coated Steel Sheet |
|
SAE J1811 |
Power Cable Terminals |
|
SAE J1996 |
Internal Combustion Engines - Piston Rings - Quality Requirements |
|
SAE J2042 |
Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width |
|
SAE J2057-2 |
Class A Multiplexing Actuators |
|
SAE J211-2 |
(R) Instrumentation for Impact Test - Part 2: Photographic Instrumentation |
|
SAE J2409 |
(R) Strain-Life Fatigue Data File Format |
|
SAE J287 |
(R) Driver Hand Control Reach |
|
SAE J447 |
(R) Prevention of Corrosion of Motor Vehicle Body and Chassis Components-July 1995 |
|
SAE J490 |
(R) Ball Joints-September 1996 |
|
SAE J491 |
Steering Ball Studs and Socket Assemblies-November 1987 |
|
SAE J581 |
Auxiliary Upper Beam Lamps |
|
SAE J689 |
(R) Curbstone Clearance, Approach, Departure, and Ramp Breakover Angles - Passenger Car and Light Truck, Recommended Practice-June 1996 |
|
SAE J974 |
Flashing Warning Lamp for Agricultural Equipment |
|
SAE J987 |
Lattice Boom CranesMethod of Test |
|
SAE J1042 |
Operator Protection for General-Purpose Industrial Machines |
|
SAE J1139 |
Direction-Of-Motion Stereotypes for Automotive Hand Controls |
|
SAE J1149 |
Metallic Air Brake System Tubing and Pipe |
|
SAE J1213-2 |
Glossary of Reliability Terminology Associated with Automotive Electronics, Information Report-October 1988 |
|
SAE J1530 |
(R) Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding of Automotive Carpet Materials |
|
SAE J1690 |
Flashers, Recommended Practice-08 1996 |
|
SAE J222 |
Parking Lamps (Front Position Lamps) |
|
SAE J2321-2 |
Disposable Hydraulic Filter Element - 190 L/Min Flow, 21 Mpa Collapse Pressure, Filtration Ratio = 75 at 7 um |
|
SAE J350 |
Spark Arrester Test Procedure for Medium Size Engines-January 1991 |
|
SAE J563 |
Six- and Twelve-Volt Cigar Lighter Receptacles |
|
SAE J682 |
Rear Wheel Splash and Stone Throw Protection |
|
SAE J740 |
Countersunk Square Holes for Cutting Edges and End Bits |
|
SAE J760 |
Dimensional Specifications for General Service Sealed Lighting Units |
|
SAE MS 1010 |
Lubricants, Industrial Oils, and Related Products Type T Turbine Oils -- Specification |
|
SAE J1318 |
(R) Gaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles |
|
SAE J135 |
Service Brake System Performance Requirements - Passenger Car-Trailer Combinations |
|
SAE J1410 |
(R) Air Brake ValvePerformance Requirements |
|
SAE J1432 |
Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width |
|
SAE J1835 |
Fastener Hardware for Wheels for Demountable Rims |
|
SAE J2077 |
Miniature Blade Type Electrical Fuses, Standard-November 1990 |
|
SAE J2183 |
60 V and 600 V Single-Core Cables |
|
SAE J2332 |
Marking of Rubber Parts |
|
SAE J2587 |
Optimized Fuel Tank Sender Closure |
|
SAE J2716 |
SENT Single Edge Nibble Transmission for Automotive Applications |
|
SAE J2798 |
Power Cylinder Blow-by: Problem Solving |
|
SAE J385 |
Motor Vehicle Seat Belt Anchorages - Performance Requirements-March 1995 |
|
SAE J473A |
Solders-June 1962 |
|
SAE J914 |
Side Turn Signal Lamps for Vehicles Less Than 12 m in Length |
|
SAE J922 |
Turbocharger Nomenclature and Terminology, Recommended Practice |
|
SAE MS 1006 |
Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches -- Specification |
|
SAE MS 1008 |
Lubricants, Industrial Oils and Related Products Type M (Metal Removal Fluids) Specification |
|
SAE J1051 |
Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines |
|
SAE J1113-27 |
(R) Electromagnetic Compatibility Measurements Procedure for Vehicle Components Part 27Immunity To Radiated Electromagnetic FieldsMode Stir Reverberation Method |
|
SAE J1113-3 |
Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power |
|
SAE J1148 |
(R) Engine Charge Air Cooler (CAC) Nomenclature |
|
SAE J1321 |
Joint TMC/SAE Fuel Consumption Test Procedure - Type II, Recommended Practice |
|
SAE J1375 |
Starter Motor Application Considerations |
|
SAE J1390 |
Engine Cooling Fan Structural Analysis, Recommended Practice |
|
SAE J1715 |
(R) Hybrid Electric Vehicle (HEV) & Electric Vehicle (EV) Terminology |
|
SAE J1754-1 |
Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced Part 1: Procurement Document |
|
SAE J2490 |
SAE No.2 Friction Test Machine uPvt Test |
|
SAE J2494-3 |
Performance Requirements for SAE J844 Non-metallic Air Brake Tubing and Push to Connect Fitting Assemblies Used in Vehicular Air Brake Systems |
|
SAE J2723 |
Engine Power Test Code Engine Power and Torque Certification |
|
SAE J299 |
Stopping Distance Test Procedure |
|
SAE J31 |
Hydraulic Backhoe Lift Capacity |
|
SAE J567 |
Lamp Bulb Retention System |
|
SAE J594 |
Reflex Reflectors |
|
SAE J616 |
Engine Foot Mounting (Front and Rear) |
|
SAE J831 |
Electrical Definitions-Reissued |
|
SAE J839 |
Passenger Car Side Door Latch Systems |
|
SAE J88 |
(R) Sound Measurement - Off-Road Work Machines - Exterior |