|
SAE J934 |
Vehicle Passenger Door Hinge Systems-Reissued |
|
SAE JA1004 |
Software Supportability Program Standard |
|
SAE J1053 |
(R) Steel Stamped Nuts of One Pitch Thread Design - Inch Series, Standard-August 1996 |
|
SAE J1067 |
Seven Conductor Cable Truck and Bus |
|
SAE J1197 |
Rated Operating Load for Loaders Equipped with Log or Material Forks without Vertical Mast |
|
SAE J1288 |
Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies |
|
SAE J1460-1 |
Human Mechanical Impact Response Characteristics - Dynamic Response of the Human Abdomen |
|
SAE J1470 |
(R) Measurement of Noise Emitted by Accelerating Highway Vehicles |
|
SAE J1601 |
(R) Rubber Cups for Hydraulic Actuating Cylinders |
|
SAE J1660 |
Fittings and Labels for Retrofit of CFC-12 (R-12) Mobile Air-Conditioning Systems to HFC-134a (R-134a) |
|
SAE J1729 |
(R) Parking Brake Drawbar Pull Test Procedure - Commercial Vehicle |
|
SAE J1757-1 |
Standard Metrology for Vehicular Displays |
|
SAE J1922 |
Powertrain Control Interface for Electronic Controls Used in Medium and Heavy-Duty Diesel On-Highway Vehicle Applications |
|
SAE J1994 |
Laboratory Testing of Vehicle and Industrial Heat Exchangers for Heat Transfer Performance |
|
SAE J2287 |
Recommended Design and Performance Standard for Seats with Integrated Lap and Shoulder Restraints |
|
SAE J2376 |
New-Vehicle Collision Repair Information |
|
SAE J2450 |
Translation Quality Metric |
|
SAE J2494-1 |
Dimensional Specifications for Metallic Body Push-to-Connect Fittings Used on a Vehicular Air Brake System-Superseding J2494 |
|
SAE J2544 |
Plug-In Relay Test Methods |
|
SAE J2727 |
(R) HFC-134a Mobile Air Conditioning System Emission Chart |
|
SAE J747 |
Control Valve Test Procedure, Standard-May 1990 |
|
SAE J753 |
Maintenance Interval Chart |
|
SAE J1052 |
(R) Motor Vehicle Driver and Passenger Head Position |
|
SAE J1123 |
Leaf Springs for Motor Vehicle Suspension - Made to Metric Units, Standard; |
|
SAE J1342 |
Test Method for Determining Power Consumption of Engine Cooling Fan Drive Systems |
|
SAE J1535 |
Performance Test for Windshield Defrosting Systems for Off-Road, Self-Propelled Work Machines, Standard-August 1996 |
|
SAE J1541 |
Fuel Injection Nomenclature - Spark Ignition Engines |
|
SAE J1671 |
Outboard Mounted Brake Drum/Disc Wheel Hub Interface DimensionsTruck and Bus |
|
SAE J1754-2 |
Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced Part 2: Ordering Information |
|
SAE J1843 |
Accelerator Pedal Position Sensor for Use with Electronic Controls in Medium- and Heavy-Duty Vehicle Applications, Recommended Practice-April 1993 |
|
SAE J1941 |
Coolant Concentrate (Low Silicate, Ethylene Glycol Type Requiring an Initial Charge of Supplemental Coolant Additive) for Heavy-Duty Engines |
|
SAE J2289 |
Electric Driver Battery Pack System Functional Guidelines |
|
SAE J2417 |
Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment |
|
SAE J2546 |
Model Specification Process Standard |
|
SAE J284 |
Safety Alert Symbol for Agricultural, Construction and Industrial Equipment |
|
SAE J286 |
SAE No. 2 Clutch Friction Test Machine Guidelines |
|
SAE J451 |
Aluminum Alloys - Fundamentals-March 1976 |
|
SAE J532 |
(R) Automotive Straight Thread Filler and Drain Plugs-June 1993 |
|
SAE J674 |
(R) Safety Glazing Materials - Motor Vehicles and Motor Vehicle Equipment |
|
SAE J712 |
Industrial and Agricultural Disc Wheels |
|
SAE J829 |
Fuel Tank Filler Cap and Cap Retainer |
|
SAE J924 |
Thrust Washers - Design and Application, Standard; |
|
SAE J108 |
Brake System Road Test Code Motorcycles |
|
SAE J1113-26 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields |
|
SAE J1177 |
Hydraulic Excavator Operator Controls |
|
SAE J1493 |
Shielding of Starter System Energization |
|
SAE J1737 |
Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation |
|
SAE J182 |
Motor Vehicle Fiducial Marks and Three-dimensional Reference System |
|
SAE J1982 |
(R) Nomenclature - Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles |
|
SAE J2024 |
Contaminants for Testing Air Brake Components and Auxiliary Pneumatic Devices Truck and Bus |
|
SAE J2027 |
(R) Standard for Protective Covers for Gasoline Fuel Line Tubing |
|
SAE J2047 |
Tire Performance Technology |
|
SAE J2177 |
Chassis Dynamometer Test Procedure - Heavy-Duty Road Vehicles |
|
SAE J2190 |
Enhanced E/E Diagnostic Test Modes, Recommended Practice-June 1993 |
|
SAE J2284-1 |
High Speed CAN (HSC) for Vehicle Applications at 125 Kbps |
|
SAE J2293-2 |
Energy Transfer System for Electric Vehicles - Part 2: Communication Requirements and Network Architecture |
|
SAE J2380 |
Vibration Testing of Electric Vehicle Batteries |
|
SAE J2492 |
Considerations for Suspension Modification |
|
SAE J2606 |
Drain and Fill Plug for use on Engines, Transmissions, and Axles |
|
SAE J264 |
Vision Glossary |
|
SAE J2707 |
Wear Test Procedure on Inertia Dynamometer for Brake Friction Materials |
|
SAE J283 |
Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch |
|
SAE J428 |
Ultrasonic Inspection-March 1991 |
|
SAE J503 |
Woodruff Key Slots and Keyways-May 1959 |
|
SAE J551-12 |
Vehicle Electromagnetic Immunity - On-Board Transmitter Simulation |
|
SAE J663 |
Rivets for Brake Linings and Bolts for Brake Blocks Truck and Bus |
|
SAE J765 |
Crane Load Stability Test Code-October 1990 |
|
SAE J919 |
(R) Sound Measurement - Off-Road Work Machines - Operator - Singular Type, Standard-April 1995 |
|
SAE J971 |
Brake Power Rating Test Code - Commercial Vehicle Inertia Dynamometer |
|
SAE J1097 |
Hydraulic Excavator Lift Capacity Calculation and Test Procedure-Reissued |
|
SAE J134 |
Brake System Road Test Code - Passenger Car and Light-Duty Truck-Trailer Combinations |
|
SAE J139 |
Ignition System Nomenclature and Terminology |
|
SAE J1533 |
Operator Enclosure Air Filter Element Test Procedure, Recommended Practice-June 1993 |
|
SAE J1617 |
Body Corrosion - A Comprehensive Introduction, Information Report-November 1993 |
|
SAE J1697 |
Recommended Practices for Design and Evaluation of Passenger and Light Truck Coolant Hose Clamped Joints |
|
SAE J1812 |
Function Performance Status Classification for EMC Immunity Testing |
|
SAE J1832 |
Low Pressure Gasoline Fuel Injector |
|
SAE J1862 |
(R) Fuel Injection System Fuel Pressure Regulator and Pressure Damper |
|
SAE J2031 |
High Tension Ignition Cable |
|
SAE J212 |
(R) Brake System Dynamometer Test Procedure - Passenger Car |
|
SAE J2223-1 |
Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 1: Single-Pole ConnectorsFlat Blade Terminals Dimensional Characteristics and Specific Requirements |
|
SAE J2359 |
Lubricating Oil, Internal Combustion Engine, Military Combat/Tactical Service |
|
SAE J2403 |
Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature Truck and Bus |
|
SAE J254 |
(R) Instrumentation and Techniques for Exhaust Gas Emissions Measurement-September 1993 |
|
SAE J2558 |
Classification System for Thermoplastic Elastomers |
|
SAE J2599 |
Fuel Filler Pipe Assembly Design Practice to Meet Low Evaporative Emission Requirements |
|
SAE J2724 |
Measurement of Disc Brake Friction Material Underlayer Distribution |
|
SAE J339 |
(R) Seat Belt Hardware Webbing Abrasion Test Procedure-June 1994 |
|
SAE J626 |
Diesel Fuel Injection - End-Mounting Flanges for Fuel Injection Pumps |
|
SAE J671 |
(R) Vibration Damping Materials and Underbody Coatings |
|
SAE J697 |
Safety Chain of Full Trailers or Converter Dollies, Recommended Practice-May 1988 |
|
SAE J702 |
(R) Brake and Electrical Connection Locations - Truck-Tractor and Truck-Trailer |
|
SAE J755 |
Marine Propeller-Shaft Ends and Hubs, Standard; |
|
SAE J881 |
Lifting Crane Sheave and Drum Sizes, Standard; |
|
SAE J948 |
Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth |
|
SAE J965 |
Abrasive Wear, Information Report-August 1966 |
|
SAE J1088 |
(R) Test Procedure for the Measurement of Gaseous Exhaust Emissions from Small Utility Engines, Recommended Practice-February 1993 |
|
SAE J109 |
Service Brake System Performance Requirements - Motorcycles and Motor-Driven Cycles |
|
SAE J1124 |
Glossary of Terms Related to Fluid Filters and Filter Testing, Recommended Practice-March 1987 |
|
SAE J1153 |
Hydraulic Master Cylinders for Motor Vehicle Brakes - Test Procedure, Standard-June 1991 |
|
SAE J1283 |
Electrical Connector for Auxiliary Starting of Construction, Agricultural, and Off-Road Machinery |
|
SAE J1409 |
(R) Air Brake Valves Test Procedure |
|
SAE J1463 |
Pull-Type Clutch Transmission Installation Dimensions |
|
SAE J1574-1 |
Measurement of Vehicle and Suspension Parameters for Directional Control Studies |
|
SAE J1625 |
Heavy-Duty Circuit Breakers-April 1996 |
|
SAE J1630 |
Driver or Passenger Airbag Module Deployment Test Procedure |
|
SAE J1780/ HRP 4382 |
Hydraulic System Diagrams and Associated Tables for Marine Vehicles |
|
SAE J1865 |
Dimensional Compatibility for Commercial Vehicles Fitment of Complete Wheels in Drum Brake Applications - Truck and Bus |
|
SAE J1877 |
Recommended Practice for Bar-Coded Vehicle Identification Number Label, Recommended Practice |
|
SAE J1888 |
High Current Time Lag Electric Fuses, Standard-November 1990 |
|
SAE J1892 |
(R) Recommended Practice for Bar-Coded Vehicle Emission Configuration Label |
|
SAE J1940 |
(R) Small Engine Power and Torque Rating Procedure |
|
SAE J2162 |
Spark Plug Heat Rating Classifications-FSC 5330 |
|
SAE J2236 |
Standard Method for Determining Continuous Upper Temperature Resistance of Elastomers |
|
SAE J2402 |
Road Vehicles - Symbols for Controls, Indicators, and Tell-Tales-ISO 2575 |
|
SAE J2486 |
Tension Indicating Washer Tightening Method for Fasteners |
|
SAE J2602-2 |
LIN Network for Vehicle Applications Conformance Test |
|
SAE J272 |
(R) Vehicle Identification Number Systems |
|
SAE J312 |
Automotive Gasolines-February 2001 |
|
SAE J469 |
Zinc Die Casting Alloys |
|
SAE J47 |
Maximum Sound Level Potential for Motorcycles |
|
SAE J656 |
Automotive Brake Definitions and Nomenclature-April 1988 |
|
SAE J711 |
Tire Selection Tables for Agricultural Tractors of Future Design, Recommended Practice-March 1991 (ASAE S220.4) |
|
SAE J940 |
Glossary of Carbon Steel Sheet and Strip Terms, Information Report-October 1994 |
|
SAE J985 |
Vision Factors Considerations in Rearview Mirror Design |
|
SAE J1138 |
(R) Design Criteria - Driver Hand Controls Location for Passenger Cars, Multipurpose Passenger Vehicles, and Trucks (10 000 GVW and under) |
|
SAE J1399 |
Electric Tachometer Specification, Recommended Practice-June 1984 |
|
SAE J1529 |
Overlap Shear Test for Automotive Type Sealant for Stationary Glass Bonding, Recommended Practice-May 1986 |
|
SAE J1532 |
(R) Transmission Oil Cooler Hose |
|
SAE J1696 |
Standard Fuel Filter Test Fluid |
|
SAE J1726 |
(R) Air-to-Air Charge Air Cooler (CAC) Internal Cleanliness |
|
SAE J1727 |
Injury Calculations Guidelines, Information Report-August 1996 |
|
SAE J1849 |
(R) Emergency Vehicle Sirens |
|
SAE J1944 |
Truck and Bus Multipurpose Vehicle Windshield Washer System |
|
SAE J1949 |
Road Vehicles - High Pressure Fuel Injection Pipe End-Connections with 60 Degree Female Cone, Standard;-October 1988 (ISO/DIS 2974) |
|
SAE J2009 |
(R) Discharge Forward Lighting System and Subsystems |
|
SAE J2020 |
Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus |
|
SAE J2521 |
(R) Disc and Drum Brake Dynamometer Squeal Noise Matrix |
|
SAE J2535 |
Setting Preload in Heavy-Duty Wheel Bearings |
|
SAE J2548 |
Test Method to Obtain Lug-Up Torque Data for Heavy-Duty Truck and Bus Engines |
|
SAE J2580 |
Identification and Installation of Air Brake System Components |
|
SAE J2614 |
Welded and Cold-Drawn, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring |
|
SAE J427 |
Penetrating Radiation Inspection-March 1991 |
|
SAE J46 |
Wheel-Slip Brake-Control System Road Test Code |
|
SAE J539 |
Voltages for Diesel Electrical Systems-November 1993 |
|
SAE J638 |
Motor Vehicle Heater Test Procedure |
|
SAE J641 |
Hydrodynamic Drives Terminology |
|
SAE J1012 |
(R) Operator Enclosure Pressurization System Test Procedure, Recommended Practice-June 1993 |
|
SAE J1278 |
SI (Metric) Synchronous Belts and Pulleys, Standard; |
|
SAE J1317 |
Electrical Propulsion Rotating Equipment - Off-Road Dumper, Recommended Practice-June 1982 |
|
SAE J1360 |
Product Identification Numbering System of Off-Road Work Machines |
|
SAE J1717 |
Interior Automotive Plastic Part Testing |
|
SAE J1776 |
(R) Marine VehiclesHydraulic PumpsDesign and Specification Guide-Superseding J1776/HIR1514A |
|
SAE J189 |
Power Steering Return Hose - Low Pressure |
|
SAE J193 |
Ball Stud and Socket Assembly - Test Procedures |
|
SAE J2028 |
Front-Wheel-Drive Constant Velocity Joint Boot Seals |
|
SAE J2056-3 |
Selection of Transmission Media |
|
SAE J2185 |
Life Test for Heavy-Duty Storage Batteries |
|
SAE J225 |
Brake Force Distribution Field Test Procedure for Truck and Bus |
|
SAE J2315 |
Wheel Nut Seat Strength |
|
SAE J2379 |
Performance Engine Building Recommended Practices |
|
SAE J2396 |
Definitions and Experimental Measures Related to the Specification of Driver Visual Behavior using Video Based Techniques |
|
SAE J2624 |
Draft Comprehensive Lining Evaluation - Vehicle |
|
SAE J3000 |
Thermoplastic Elastomer Classification System |
|
SAE J397 |
Deflection Limiting VolumeProtective Structures Laboratory Evaluation |
|
SAE J891 |
Spring Nuts |
|
SAE J892 |
(R) Push-On Spring Nuts Inch Series - General Specifications, Standard-August 1996 |
|
SAE J101 |
(R) Hydraulic Wheel Cylinders for Automotive Drum Brakes |
|
SAE J107 |
Operator Controls and Displays on Motorcycles |
|
SAE J1174 |
Operator Ear Sound Level Measurement Procedure for Small Engine Powered Equipment, Recommended Practice |
|
SAE J1467 |
(R) Clip Fastener Fitting, Standard-June 1993 |
|
SAE J1767 |
Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials, Recommended Practice-January 1995 |
|
SAE J1806 |
(R) Clutch Dimensions for Truck and Bus Applications |
|
SAE J213 |
Motorcycle Classifications |
|
SAE J2219 |
(R) Mobile Air Conditioning Industry Criteria and Guidelines, Information Report-October 1994 |
|
SAE J2284-2 |
High Speed CAN (HSC) for Vehicle Applications at 250 Kbps |
|
SAE J2468 |
(R) Road Vehicles - Brake Linings - Compressibility Test Procedure |
|
SAE J2600 |
Compressed Hydrogen Surface Vehicle Refuelling Connection Devices |
|
SAE J285 |
(R) Dispenser Nozzle Spouts for Liquid Fuels Intended for Use with Spark Ignition and Compression Ignition Engines |
|
SAE J293 |
(R) Truck And Bus Grade Parking Performance Requirements |
|
SAE J474 |
Electroplating and Related Finishes |
|
SAE J647 |
(R) Transmissions - Schematic Diagrams |
|
SAE J782B |
Motor Vehicle Seating Manual, Recommended Practice |
|
SAE J853 |
Vehicle Identification Numbers, Standard-December 1981 |
|
SAE J858 |
Electrical Terminals Blade Type |
|
SAE J875 |
(R) Trailer Axle Alignment |
|
SAE J1053M |
(R) Steel Stamped Nuts of One Pitch Thread Design - Metric Series, Standard-August 1996 |
|
SAE J1063 |
(R) Cantilevered Boom Crane Structures - Method of Test, Standard-November 1993 |
|
SAE J1093 |
(R) Latticed Crane Boom Systems - Analytical Procedure, Information Report |
|
SAE J1105 |
(R) HornForward WarningElectricPerformance, Test, and Application |
|
SAE J1134 |
(R) SAE Nodal Mount |
|
SAE J1308 |
Fan Guard for Off-Road Machines |
|
SAE J1325 |
Test Method for Measuring the Relative Drapeability of Flexible Insulation Materials |
|
SAE J1416 |
Generator Terminal Labeling |
|
SAE J1555 |
Recommended Practice for Optimizing Automobile Damageability |
|
SAE J1588 |
Internal Combustion Engines - Piston Rings - Vocabulary |
|
SAE J1589 |
Internal Combustion Engines - Piston Rings - Inspection Measuring Principles |
|
SAE J1590 |
Internal Combustion Engines - Piston Rings - Material Specifications |
|
SAE J1596 |
Automotive V-Ribbed Belt Drives and Test Methods, Recommended Practice-June 1989 |
|
SAE J167 |
Overhead Protection for Agricultural Tractors Test Procedures and Performance Requirements |
|
SAE J1731 |
Pilot Bearings for Truck and Bus Applications |
|
SAE J1748 |
Methods for Determining Physical Properties of Polymeric Materials Exposed to Hydrocarbon Fuels or Their Surrogates and Their Blends with Oxygenated Additives |
|
SAE J2013 |
Military Tire Glossary, Recommended Practice-May 1991 |
|
SAE J2039 |
Side Turn Signal Lamps for Long Vehicles |
|
SAE J2073 |
Autmotive Starter Remanufacturing Procedures |
|
SAE J228 |
Airflow Reference Standards |
|
SAE J2283 |
Mechanical and Material Requirements for One Piece Wheel Nuts |
|
SAE J2349 |
Electric Windshield Wiper SwitchTrucks, Buses, and Multipurpose Vehicles |
|
SAE J2461 |
Vehicle Electronic Programming Stations (VEPS) System Specification for Win32 |
|
SAE J2470 |
Hydraulic Fluid PowerValvesMethod for Assessing the Lock Sensitivity to Contaminants |
|
SAE J2564 |
Automotive Stability Enhancement Systems |
|
SAE J2627 |
Commercial Vehicle Braking System Definitions |
|
SAE J2654 |
Hardness of Brake Lining |
|
SAE J2665 |
Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method |
|
SAE J2719 |
Information Report on the Development of a Hydrogen Quality Guideline for Fuel Cell Vehicles |
|
SAE J2748 |
VHDL-AMS Statistical Analysis Packages |
|
SAE J308 |
(R) Axle and Manual Transmission Lubricants |
|
SAE J554 |
Electric Fuses (Cartridge Type)-August 1987 |
|
SAE J593 |
Backup Lamps (Reversing Lamps) |
|
SAE J595 |
(R) Directional Flashing Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles |
|
SAE J852 |
(R) Front Cornering Lamps for Use on Motor Vehicles |
|
SAE J935 |
High-Strength Carbon and Alloy Die Drawn Steels |
|
SAE J1029 |
Lighting and Marking of Construction, Earthmoving Machinery |
|
SAE J1142 |
(R) Towability Design Criteria and Equipment Use - Passenger Cars, Vans, and Light-Duty Trucks, Recommended Practice-February 1994 |
|
SAE J1154 |
Hydraulic Master Cylinders for Motor Vehicle Brakes - Performance Requirements, Standard-June 1991 |
|
SAE J1169 |
Measurement of Light Vehicle Exhaust Sound Level under Stationary Conditions |
|
SAE J1242 |
Acoustic Emission Test Methods, Information Report-March 1991 |
|
SAE J1247 |
Simulated Mountain-Brake Performance Test Procedure |
|
SAE J1252 |
SAE Wind Tunnel Test Procedure for Trucks and Buses, Recommended Practice-July 1981 |
|
SAE J1326 |
Test Method for Measuring Wet Color Transfer Characteristics, Recommended Practice-February 1985 |
|
SAE J1394 |
Metric Nonmetallic Air Brake System Tubing |
|
SAE J1528 |
Fatigue Testing Procedure for Suspension -Leaf Springs, Recommended Practice-June 1990 |
|
SAE J1540 |
Manual Transmission Efficiency and Parasitic Loss Measurement |
|
SAE J1651 |
Metric Yoke Type Rod Ends, Standard |
|
SAE J1775/ HIR 1559A |
Bleed-Air Pneumatic Systems for Gas Turbine Equipped Marine and Amphibious Craft |
|
SAE J1847 |
Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping, Recommended Practice-June 1989 |
|
SAE J1887 |
Automotive Compacted Graphite Iron Castings |
|
SAE J1975 |
Case Hardenability of Carburized Steels |
|
SAE J2174 |
(R) Heavy-Duty Wiring Systems for Trailers 2032 mm or More in Width |
|
SAE J2234 |
Equivalent Temperature Truck and Bus |
|
SAE J2265 |
Diesel Engines - Diesel Fuel - Performance Requirement and Test Method for Assessing Fuel Lubricity, Standard;-June 1995 |
|
SAE J2452 |
Stepwise Coastdown Methodology for Measuring Tire Rolling Resistance |
|
SAE J2672 |
Reduced Effort Power Steering and Power Steering Backup Systems |
|
SAE J310 |
Automotive Lubricating Greases |
|
SAE J326 |
Nomenclature-Hydraulic Backhoes-March 1986 |
|
SAE J380 |
(R) Specific Gravity of Friction Material |
|
SAE J4000 |
Identification and Measurement of Best Practice in Implementation of Lean Operation |
|
SAE J551-13 |
(R) Vehicle Electromagnetic Immunity - Bulk Current Injection |
|
SAE J600 |
(R) Headlamp Aim Test Machines-February 1993 |
|
SAE J621 |
Industrial Power Take-Offs with Driving Ring-Type Overcenter Clutches-April 1989 |
|
SAE J631 |
Radiator Nomenclature |
|
SAE J748 |
Hydraulic Directional Control Valves, 3000 psi Maximum, Recommended Practice |
|
SAE J843 |
Brake System Road Test Code - Passenger Car and Light-Duty Truck |
|
SAE J879B |
Motor Vehicle Seating Systems, Recommended Practice-July 1968 |
|
SAE J932 |
Definitions for Macrostrain and Microstrain |
|
SAE J1315 |
Off-Road Tire and Rim Selection and Application, Standard-January 1991 |
|
SAE J1368 |
Child Restraint Anchorages and Attachment Hardware |
|
SAE J1405 |
Optional Test Procedures for Hydraulic Hose Assemblies |
|
SAE J1450 |
Air Brake Actuator Diaphragm Test Procedure |
|
SAE J1472 |
Braking Performance - Rollers |
|
SAE J17 |
Latex Foam Rubbers |
|
SAE J1807 |
Hydraulic Power Assist Brake Booster Test Procedure |
|
SAE J1958 |
Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing) |
|
SAE J2000 |
Internal Combustion Engines - Piston Rings - Keystone Rings |
|
SAE J2200 |
Passenger Car and Light Truck Axles |
|
SAE J2293-1 |
Energy Transfer System for Electric Vehicles - Part 1: Functional Requirements and System Architectures |
|
SAE J2567 |
Measurement of Exhaust Sound Levels of Stationary Snowmobiles |
|
SAE J2623 |
Standard Rainflow File Format |
|
SAE J2662 |
Torque Ratings for Power Take-off Mounting Pads |
|
SAE J2669 |
Voltage Regulators for Automotive-Type Generators |
|
SAE J2717 |
Tests to Define Tire Size (Geometry), Mass, and Inertias |
|
SAE J323 |
Test Method for Determining Cold Cracking of Flexible Plastic Materials |
|
SAE J371 |
Drain, Fill and Level Plugs for Off-Road, Self-Propelled Work Machines |
|
SAE J464 |
Magnesium Alloys-April 1979 |
|
SAE J75 |
Motor Vehicle Brake Fluid Container Compatibility |
|
SAE J815 |
Load Deflection Testing of Urethane Foams for Automotive Seating |
|
SAE J817-1 |
Engineering Design Serviceability Guidelines - Construction and Industrial Machinery - Serviceability Definitions - Off-Road Work Machines, Information Report-March 1991 |
|
SAE J851 |
Dimensions - Wheels for Demountable Rims, Demountable Rims, and Spacer Bands - Commercial Vehicles |
|
SAE J892M |
(R) Push-On Spring Nuts Metric Series - General Specifications, Standard-August 1996 |
|
SAE J96 |
Flashing Warning Lamp for Industrial Equipment |
|
SAE MS 1007 |
Lubricants, Industrial Oils, and Related Products Type G Slideway Lubricants - Specification |
|
SAE J1119 |
Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS) |
|
SAE J1200 |
Blind Rivets - Break Mandrel Type |
|
SAE J1229 |
Truck Identification Terminology, Recommended Practice-December 1981 |
|
SAE J1341 |
Test Method for Measuring Power Consumption of Hydraulic Pumps for Trucks and Buses |
|
SAE J1352 |
Compression and Recovery of Insulation Paddings |
|
SAE J1400 |
(R) Laboratory Measurement of the Airborne Sound Barrier Performance of Automotive Materials and Assemblies, Recommended Practice |
|
SAE J1406 |
Application of Hydraulic Brake Hose to Motor Vehicles Wheel End and Axle |
|
SAE J1522 |
Truck Driver Stomach Position |
|
SAE J1526 |
Joint TMC/SAE Fuel Consumption In-Service Test Procedure Type III, Recommended Practice-June 1987 |
|
SAE J1646 |
Glossary of TermsLubricated Friction Systems |
|
SAE J1751 |
Lubrication Components and Systems Used on Machine Tools and Equipment for the Automotive Industry, Recommended Practice-December 1995 |
|
SAE J1826 |
Turbocharger Gas Stand Test Code, Recommended Practice; |
|
SAE J192 |
(R) Maximum Exterior Sound Level for Snowmobiles |
|
SAE J2071 |
Aerodynamic Testing of Road Vehicles - Open Throat Wind Tunnel Adjustment, Information Report-June 1994 |
|
SAE J2082 |
Cooling Flow Measurement Techniques, Information Report-June 1992 |
|
SAE J2264 |
Chassis Dynamometer Simulation of Road Load Using Coastdown Techniques, Recommended Practice-April 1995 |
|
SAE J2288 |
Life Cycle Testing of Electric Vehicle Battery Modules |
|
SAE J2316 |
Wheel Nut Seat System Test Procedures and Performance Requirements for Passenger Cars and Light Trucks |
|
SAE J2455 |
Drivetrain Systems Vibration Analysis Data Requirements |