SAE J2134

(R) Luminous Reflectance in Safety Glazing Materials for Road Vehicles

SAE J220

Crane Boomstop

SAE J2203

SAE 17.6 Cubic Inch Spark Plug Rating Engine

SAE J2226

Internal Combustion Engines - Piston Rings - Steel Rectangular Rings

SAE J2237

Heavy-Duty Starter Remanufacturing Procedures, Recommended Practice-February 1995

SAE J2238

Airbag Inflator Ballistic Tank Test Procedure Gas Generators Used in Inflatable Restraint Systems

SAE J2246

Antilock Brake System Review, Information Report-June 1992

SAE J2255

Antilock Brake Systems Energy Consumption Test Procedure for Air-Braked-Equipped Truck Tractors, Buses, Trailers, and Dollies, Recommended Practice-May 1996

SAE J2266

Location Referencing Message Specification (LRMS)

SAE J2313

On-Board Land Vehicle Mayday Reporting Interface

SAE J232

Industrial Rotary Mowers

SAE J2378

Test Procedure for Trailer Air Reservoir Fill and Parking Brake Release Times

SAE J2418

Occupant Restraint System EvaluationFrontal Impact Component-Level Heavy Trucks

SAE J2420

COE Frontal Strength Evaluation - Dynamic Loading Heavy Trucks

SAE J2453

Manual Transmission and Transaxle Efficiency and Parasitic Loss Measurement

SAE J2517

Hybrid III Family Chest Potentiometer Calibration Procedure

SAE J253

Headlamp Switch

SAE J2542

Self-Propelled Sweepers and Scrubbers Fuel Consumption of Non-Propulsion Auxiliary Engines

SAE J2545

Test Procedures for Non-SAE Hydraulic Hoses

SAE J2584

Headlamp Mounting Height for Passenger and Pickup Truck Vehicles

SAE J2592

Carbon Steel Tubing for General Use Understanding Nondestructive Testing for Carbon Steel Tubing

SAE J2649

Strain-Life Overload Fatigue Data File Format

SAE J278

Snowmobile Stop Lamp

SAE J292

Snowmobile and Snowmobile Cutter Lamps, Reflective Devices, and Associated Equipment

SAE J418

Grain Size Determination of Steels- 5/1999

SAE J551-2

Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles, Motorboats, and Spark-Ignited Engine-Driven Devices

SAE J68

Tests for Snowmobile Switching Devices and Components

SAE J693

Truck Overall Widths Across Dual Tires, Information Report-April 1989

SAE J811

Surface Rolling and Other Methods for Mechanical Prestressing of Metals, Information Report;-August 1981

SAE J860

Test Method for Measuring Mass (Weight) of Organic Trim Materials

SAE J900

Crankcase Emission Control Test Code, Standard;

SAE J949

(R) Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates

SAE J972

Moving Rigid Barrier Collision Tests

SAE MS 1001

Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems -- Specification

SAE J1016

Component Nomenclature - Dumpers, Standard;- 6/2000,

SAE J102

SQUARE HEAD SETSCREWS- 1/1990

SAE J1026

Braking Performance - Crawler Tractors and Crawler Loaders, Standard- 2/2000,

SAE J1035

TECHNICAL PUBLICATION FOR AGRICULTURAL EQUIPMENT

SAE J1036

Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors, Standard;- 3/2001,

SAE J1040

Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry, and Mining Machines

SAE J1041

Braking System Test Procedures and Braking Performance Criteria for Agricultural Tractors, Standard- 7/1996

SAE J1047

Tubing - Motor Vehicle Brake System Hydraulic, Recommended Practice- 11/1998,

SAE J1055

SERVICE PERFORMANCE REQUIREMENTS FOR SIGNAL FLASHER- ,

SAE J1056

SERVICE PERFORMANCE REQUIREMENTS FOR VEHICULAR HAZARD WARNING FLASHERS- ,

SAE J1076

Backup Lamp Switch, Standard-March 1990

SAE J1092

Nomenclature Industrial Tractors (General Purpose Wheel)

SAE J1094

Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report-June 1992

SAE J1110

Specification Definitions - Articulated Rubber- Tired Log Skidder, Standard;

SAE J1137

Hydraulic Valves for Motor Vehicle Brake Systems - Performance Requirements

SAE J1146

THE AUTOMATIC LUBRICANT PERFORMANCE AND SERVICE CLASSIFICATION MAINTENANCE PROCEDURE- 5/1994,

SAE J1152

Braking Performance - Rubber-Tired Construction Machines, Recommended Practice- 12/1994,

SAE J1164

Labeling of ROPS and FOPS and OPS, Standard- 2/2000,

SAE J1203

Light Transmittance of Automotive Windshields Safety Glazing Materials, Recommended Practice- 4/1999,

SAE J1223

Marine Carburetors and Fuel Injection Throttle Bodies

SAE J1224

BRAKING PERFORMANCE-NEW OFF-HIGHWAY DUMPERS

SAE J1250

In-Service Brake Performance Test Procedure - Vehicles over 4500 kg (10 000 lb), Recommended Practice- 9/2000,

SAE J1270

Measurement of Passenger Car, Light Truck, and Highway Truck and Bus Tire Rolling Resistance

SAE J1271

TECHNICAL COMMITTEE GUIDEPOSTS- 1/1992

SAE J1275

TESTING METHODS FOR AUDIO CASSETTES- ,

SAE J1285

Powershift Transmission Fluid Classification, Recommended Practice- 12/1999,

SAE J1354

Nomenclature - Forwarder

SAE J1388

Personnel Protection - Skid Steer Loaders

SAE J1389

Corrosion Test for Insulation Materials

SAE J1395

Front and Rear Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width, Standard- 8/1996,

SAE J1430

(R) Retardation Capability of Off- Highway Dumpers and Scrapers, Standard- 10/2000,

SAE J1464

Identification Terminology of Loaders/Tractors with Forks and Rough Terrain Forklifts- 10/2004,

SAE J1466

Passenger Car and Light Truck Tire Dynamic Driving Traction in Snow, Recommended Practice- 2/2001,

SAE J1473

Brake Performance - Rubber-Tired Earthmoving Machines, Standard- 05/1999

SAE J1500

UNIVERSAL SYMBOLS FOR OPEATOR CONTROLS- 1/1987

SAE J1512

Manual Slack Adjuster Performance Requirements

SAE J1513

External Automatic Slack Adjuster Performance Requirements

SAE J1548

(R) Draebars-Agricultural Wheel Tractors- 7/1996,

SAE J1554

IDENTIFYING AND REPAIRING HIGH STRENGTH STEEL VEHI.- 12/1993,

SAE J158

Automotive Malleable Iron Castings

SAE J1621

Engine Retarder Dynamometer Test and Capability Rating Procedure

SAE J1634

(R) Electric Vehicle Energy Consumption and Range Test Procedure- 10/2002,

SAE J166

MINIMUM PERFORMANCE CRITERIA FOR BRAKE SYSTEMS FOR OFF-HIGHWAY TRUCKS AND WAGONS- 1/1977,

SAE J1662

Compatibility of Retrofit Refrigerants with Air-Conditioning System Materials

SAE J1669-2

SAE Passenger Compartment Air Filter Test Code - Test Method for Gas Removing Filters

SAE J1698

(R) Vehicle Event Data InterfaceVehicular Output Data Definition

SAE J1702

Self-Propelled Sweepers Sweep-Ability Performance

SAE J1761

Information Report on ITS Terms and Definitions

SAE J178

(R) Music Steel Spring Wire and Springs, Recommended Practice- 6/1998,

SAE J1789

Self-Propelled Sweepers and Scrubbers Braking Performance

SAE J1791

Self-Propelled Sweepers and Scrubbers Dual Position Driving Controls and Displays

SAE J1792-1

Self-Propelled Sweepers - Air Flow Performance Part 1: Suction Air Volume Performance

SAE J1794

SAE Restraint Systems Effluent Test Procedure

SAE J1800

Method for Evaluating the Paintable Characteristics of Automotive Sealers, Recommended Practice-April 1987

SAE J1813

A VEHICLE NETWORK PROTOCOL WITH A FAULT TOLERANT MULTIPLEX SIGNAL BUS- 12/1994,

SAE J1864

Method for Evaluating Material Separation in Automotive Sealers under Pressure in Static Conditions, Recommended Practice

SAE J1882

METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)- 12/1994

SAE J1981

Road Hazard Impact Test for Wheel and Tire Assemblies (Passenger Car, Light Truck, and Multipurpose Vehicles)

SAE J1988

Residual Aligning Moment Test, Recommended Practice-August 1994

SAE J1990

Recovery and Recycle Equipment for Mobile Automotive Air-Conditioning Systems

SAE J2056/2

Survey of Known Protocols, Information Report- 2/2000,

SAE J2058

Chrysler Sensor and Control (CSC) Bus Multiplexing Network for Class 'A' Applications- 7/2002,

SAE J2068

Combination Turn Signal Hazard Warning Signal Flashers, Recommended Practice- 7/1999,

SAE J209

Instrument Face Design and Location for Construction and Industrial Equipment

SAE J211

INSTRUMENTATION FOR IMPACT TEST

SAE J2119

Manual Controls for Mature Drivers

SAE J2124

Numbering System for Single Diameter and Taper Reamers

SAE J2132

Manual Transmissions and Transaxle High-Speed Lubrication, Unbalance, and Seizure Evaluation

SAE J2201

Universal Interface for OBD II Scan, Recommended Practice- 7/1999,

SAE J2214

Vehicle Electronic Programming Stations (VEPS) System Specification for Programming Components at OEM Assembly Plants- 06/2004,

SAE J2276

Numbering System for Multiple Diameter Cutting Tools

SAE J2319

Low-Speed Impact Bumper System Test Procedure for Passenger Vehicles

SAE J233

MARINE ENGINE MOUNTINGS DIRECT DRIVE TRANSMISSION- ,

SAE J2330

Walk-Along Work MachinesBraking SystemsPerformance Requirements and Test Procedures

SAE J234

Electric Windshield Washer Switch-October 1977

SAE J2354

Message Sets for Advanced Traveler Information System (ATIS)

SAE J2365

Calculation of the Time to Complete In-Vehicle Navigation and Route Guidance Tasks

SAE J2366-1L

ITS Data Bus - Low Impedance Stereo Audio (LISA)

SAE J2372

Field Test Analysis Information Report

SAE J2388

Secondary Control Modifications

SAE J2419

Occupant Restraint System EvaluationFrontal Impact System-Level Heavy Trucks

SAE J2423

Cab Roof Strength Evaluation - Dynamic Loading Heavy Trucks

SAE J2424

Free Motion Headform Impact Tests of Heavy Truck Cab Interiors

SAE J242A

METRIC THREAD FUEL INJECTION TUBING CONNECTIONS- ,

SAE J243

Methods of Tests for Automotive-Type Sealers, Adhesives, and Deadeners-October 1971

SAE J2494

Push-to-Connect Tube Fittings for use in the Piping of Vehicular Air Brake- 08/2004

SAE J2540-1

RDS Phrase Lists

SAE J2549

Single Conductor Cable for Heavy-Duty Applications—Truck and Bus

SAE J2560

Forward Lighting Halogen Bulb Performance Requirements for Motor Vehicles

SAE J2566

Personal WatercraftDisplay of Persons Capacity Information

SAE J2583

Directional Drilling Planning and Mapping Nomenclature

SAE J259

Ignition Switch-June 1971

SAE J2591

Adaptive Forward Lighting System

SAE J2603

(R) Recommended Practice for Powered Gas Brake Control Systems

SAE J2708

(R) Agricultural Tractor Test Code (OECD)- 8/2002,

SAE J2743

Air Compressor Size Rating Recommended Practice—Truck and Bus

SAE J277

Maintenance of Design Voltage - Snowmobile Electrical Systems

SAE J2779

Low Speed Thorax Impact Test Procedure for the HIII 50th Male Dummy

SAE J280

Snowmobile Headlamps

SAE J2808

Road/Lane Departure Warning Systems: Information for the Human Interface

SAE J2809

Honda Diagnostic Serial Data Link Protocol—ABS/VSA System

SAE J2819

TP2.0 Vehicle Diagnostic Protocol

SAE J29

PLASTIC MATERIAL FOR USE IN HOUSINGS OF MTR. VEHI.- ,

SAE J3046-1

Reciprocating Internal Combustion EnginesPerformance Part 1: Standard Reference Conditions, Declarations of Power, Fuel and Lubricating Oil Consumptions, and Test Methods- 04/2005,

SAE J388

Dynamic Flex Fatigue Test for Slab Polyurethane Foam, Recommended Practice- 6/1998,

SAE J416

Tensile Test Specimens- 5/1999

SAE J439A

Sintered Carbide Tools-February 1977

SAE J475A

Screw Threads- 1/1989

SAE J478A

SLOTTED AND RECESSED HEAD SCREWS- 1/1990

SAE J521B

FUEL INJECTION TUBING CONNECTIONS- 1/1987,

SAE J551

PERFORMANCE LEVELS AND METHODS OF MEASUREMENT OF ELECTROMAGNETIC RADIATION FROM VEHICLES AND DEVICES (30 TO 1000 MHz)- 7/1995,

SAE J551-4

Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles and Devices, Broadband and Narrowband, 150 kHz to 1000 MHz

SAE J555A

TRUCK, TRUCK-TRACTOR, TRAILER, & MOTOR COACH WIRING- 1/1981

SAE J557

HIGH TENSION IGNITION CABLE- 1/1990

SAE J589B

Turn Signal Switch-October 1977

SAE J64

Vehicle Identification Numbers - Snowmobiles

SAE J660

BRAKE LININGS- ,

SAE J688

Truck Ability Prediction Procedure, Recommended Practice- 2/1997

SAE J690

Certificates of Maximum Net Horsepower for Motor Trucks and Truck Tractors- 5/1999,

SAE J708

Agricultural Tractor Test Code

SAE J749

(R) Drawbars-Crawler Tractor, Standard- 2/2002,

SAE J76

HANDLING AND DISPENSING OF MOTOR VEHICLE BRAKE FLUID- 1/1989,

SAE J772

Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs

SAE J869

Component Nomenclature - Construction Two- and Four-Wheel Tractors, Standard;- 6/2000,

SAE J872

Drawbar Test Procedure for Construction, Forestry, and Industrial Machines-Superseded by SAE J/ISO 7464

SAE J877

Properties of Low Carbon Sheet Steel and Their Relationship to Formability, Information Report- 9/1997,

SAE J909

(R) Three-Point Hitch, Implement Quick- Attaching Coupler, Agricultural Tractors- 7/1996,

SAE J913

Test Method for Wicking of Automotive Fabrics and Fibrous Materials

SAE J943

Slow-Moving Vehicle Identification Emblem, Standard;- 6/2000; Same as ANSI B114.1

SAE J944

STEERING CONTROL SYSTEM - PASSENGER CAR - LABORATORY TEST PROCEDURE, RECOMMENDED PRACTICE- 1/1992,

SAE J950

Gradeability Test Code- 6/1993,

SAE J954

Urethane for Automotive Seating, Recommended Practice- 7/1998,

SAE J962

Formed Tube Ends for Hose Connections, Standard- 3/1997

SAE J983

Crane and Cable Excavator Basic Operating Control Arrangements

SAE TSB 002

(R) Preparation of SAE Technical Reports-June 1992; Superseding J 1159

SAE TSB 004

Technical Committee Guidelines

SAE J 2641

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues

SAE J1098

Ton Kilometer per Hour Application, Standard;

SAE J1145

(R) Emissions Terminology and Nomenclature, Recommended Practice

SAE J1159

PREPARATION OF SAE TECHNICAL REPORTS - SURFACE VEHICLE AND MACHINES; STANDARDS, RECOMMENDED PRACTICES, INFORMATION REPORTS, RECOMMENDED PRACTICE- 1/1992

SAE J117

SEAT BELT ASSEMBLIES- 6/1993,

SAE J1170

(R) Front and Rear Power Take-Off for Agricultural Tractors- 7/1996

SAE J1222

Speed Control Assurance for Snowmobiles

SAE J1230

Minimum Requirements for Wheel-Slip Brake-Control System Malfunction Signals, Recommended Practice- 11/1998,

SAE J1261

Agricultural Tractor Tire Dynamic Indices, Information Report;

SAE J1279

Snowmobile Drive Mechanisms

SAE J1280

Determination of Sulfur Compounds in Automotive Exhaust, Information Report

SAE J1305

Two-Block Warning and Limit Systems in Lifting Crane Service

SAE J1338

Open Field Whole-Vehicle Radiated Susceptibility 10 kHz-18 GHz, Electric Field, Information Report;- 7/1995,

SAE J1363

Capacity Rating Dumper Body and Trailer Body

SAE J1437

Lead-Free Replacement Paints- 12/2001,

SAE J1440

(R) Off-Road Tire and Rim Classification- Forestry Machines, Recommended Practice-September 1993

SAE J1506

Emission Test Driving Schedules, Information Report;

SAE J157

Oil-Tempered Chromium—Silicon Alloy Steel Wire and Springs

SAE J1600

Method for Evaluating the Adhesion Characteristics of Automotive Sealers, Recommended Practice- 1/2001,

SAE J1618

Continuously Variable Transmission Test Code for Passenger Cars

SAE J1652

Dynamometer Effectiveness Characterization Test for Passenger Car and Light Truck Caliper Disc Brake Friction Materials, Recommended Practice

SAE J1679

Peel Strength of Soft Trim Adhesives, Recommended Practice-April 1994

SAE J1709

European Brake Fluid Technology- 7/2006,

SAE J1712

Reporting on Emission Testing for In-Use Light -Duty Trucks and Passenger Vehicles, Recommended Practice- 6/2001,

SAE J172

HARD DRAWN CARBON STEEL VALVE SPRING QUALITY WIRE AND SPRINGS- 8/1994,

SAE J1754-3

Hose Assemblies, Hydraulic, J517 100R Series Hose—Part 3: Procurement and Ordering Information

SAE J1793

Self-Propelled Sweepers and Scrubbers Tank and Hopper Capacity Rating

SAE J1824

Specification Definitions - Clam Bunk Skidder

SAE J1827

UNIBODY WELD QUALITY TESTING- 4/1994,

SAE J19

Latex-Dipped Goods and Coatings for Automotive Applications

SAE J1945

Cross-Tooth Companion Flanges, Type T

SAE J1954

Guide to the Application and Use of Passenger Car Air- Conditioning Compressor Face Seals

SAE J1980

(R) Guidelines for Evaluating Out-of-Position Vehicle Occupant Interactions with Deploying Airbags

SAE J2037

Off-Board Diagnostic Message Formats, Information Report- 06/2001;

SAE J2075

Alternator Remanufacturing/Rebuilding Procedures Includes Passenger Car, Heavy Duty, Industrial, Agricultural, and Marine

SAE J2092

Testing of Wheelchair Lifts for Entry to or Exit from a Personally Licensed Vehicle

SAE J2096

Categorization of Low Carbon Automotive Sheet Steel, Recommended Practice- 9/1997

SAE J2106

Token Slot Network for Automotive Control- 7/2002,

SAE J2116

Two-Stroke-Cycle Gasoline Engine Lubricants Performance and Service Classification

SAE J214

Hydraulic Cylinder Test Procedure

SAE J2233

Bus Body Heating System Test

SAE J2245

Recommended Practice for Splash and Spray Evaluation

SAE J2267

Minimum Performance Criteria for Operator Front Protective Structure (OFPS) for Certain Equipment

SAE J2284

High-Speed CAN (HSC) for Vehicle Applications at 500 KBPS- 5/2001,

SAE J2306

Automobile and Light Truck Engine Coolant Concentrate Propylene Glycol Type, Recommended Practice- 10/2000,

SAE J2312

Automatic Transmission Intake Filter Test Procedure

SAE J2350

Electric Blower Motor SwitchTrucks, Buses, and Multipurpose Vehicles

SAE J2353

Data Dictionary for Advanced Traveler Information Systems (ATIS)

SAE J2364

Navigation and Route Guidance Function Accessibility While Driving

SAE J2366-7

ITS Data BusApplication Message Layer

SAE J2393

Swing Performance And Rating Procedure, Material Handlers, Knuckle Boom Log Loaders And Certain Forestry Equipment

SAE J2421

COE Frontal Strength Evaluation - Quasi-Static

SAE J2469

Clutch Application Powertrain Startability Rating Requirements for Truck and Bus Applicatons

SAE J2474

Self Propelled Sweepers and Scrubbers Battery Run-Time

SAE J2540-2

(R) ITIS Phrase Lists (International Traveler Information Systems)

SAE J255

Diesel Engine Smoke Measurement

SAE J2579

Technical Information Report for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles

SAE J260

(R) Rear Underride Guard Test Procedure, Recommended Practice- 9/1997,

SAE J2604

Recommended Test Procedure for Powered Gas Brake Control Systems

SAE J2615

Testing Performance of Fuel Cell Systems for Automotive Applications

SAE J2617

Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications

SAE J2745

Categorization and Properties of Advanced High Strength Automotive Sheet Steels

SAE J2785

Standardization of Color and Verbiage for Fuel Inlet Closures

SAE J351

(R) Oil-Tempered Carbon-Steel Valve Spring Quality Wire and Springs, Recommended Practice- 6/1998,

SAE J367

Passenger Car Door System Crush Test Procedure

SAE J410

High Strength, Low Alloy Steel- 1992

SAE J43

Axle Application Load Rating for Industrial Wheel Loaders and Backhoe Loaders

SAE J495

Straight Pins (Solid)- 05/2004,

SAE J496

Spring Type Straight Pins- 04/2004,

SAE J498B

INVOLUTE SPLINES, SERRATIONS, AND INSPECTION

SAE J559

SEVEN CONDUCTOR JACKETED CABLE FOR TRUCK & TRAILER CONNECTIONS- ,

SAE J579

Sealed Beam Headlamp Units for Motor Vehicles- 3/1992,

SAE J582

Auxiliary Low Beam Lamps

SAE J607

Small Spark Ignition Engine Test Code- 8/1988,

SAE J654

(R) Static and Reciprocating Elastomeric Transmission Seals

SAE J686

Motor Vehicle License Plates

SAE J721

(R) Operating Requirements for Tractors and Power Take-Off Driven Implements- 7/1996

SAE J729

Nomenclature and Specification Definitions - Dozers, Standard- 2/2002,

SAE J737

Hole Spacing for Scraper and Dozer Cutting Edges

SAE J752B

MAINTENANCE INTERVAL - CONSTRUCTION EQUIPMENT- 1/1991

SAE J780

Engine Coolant Pump Seals

SAE J784A

Residential Stress Measurement by X-Ray Diffraction

SAE J841

Operator Controls for Agricultural Wheeled Tractors, Standard- 1/1999

SAE J859

Numbering System for Designating Grades of Cast Ferrous Materials, Recommended Practice- 7/2000,

SAE J868

Large Size Radiator Filler Caps and Necks, Recommended Practice- 5/1993,

SAE J882

Test Method for Measuring Thickness of Automotive Textiles and Plastics

SAE J921B

MOTOR VEHICLE INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURES - HEAD AREA- 1/1981,

SAE J938

DROP TEST FOR EVALUATING LAMINATED SAFETY GLASS FO...- 1/1992,

SAE J945

(R) Vehicular Hazard Warning Flashers, Standard- 7/1999,

SAE J947

Glossary of Fiberboard Terminology

SAE J958

Nomenclature and Dimensions for Crane Shovels

SAE J992

Brake System Performance Requirements - Truck, Bus, and Combination of Vehicles, Recommended Practice- 12/1998,

SAE J1002

(R) Seals - Evaluation of Elastohydrodynamic

SAE J1003

Diesel Engine Emission Measurement Procedure, Recommended Practice

SAE J1028

Mobile Crane Working Area Definitions

SAE J1034

(R) Automobile and Light Truck Engine Coolant Concentrate Ethylene Glycol Type, Recommended Practice- 6/2000,

SAE J104

SQUARE AND HEX NUTS- 1/1990

SAE J1045

Instrumentation and Techniques for Vehicle Refueling Emissions Measurement, Recommended Practice

SAE J1048

Symbols for Motor Vehicle Controls, Indicators and Tell-Tales, Standard- 8/1997,

SAE J1054

Warning Lamp Alternating Flashers, Recommended Practice- 7/1999,

SAE J1057

Identification Terminology of Earthmoving Machines, Standard- 5/1999

SAE J1082

Fuel Economy Measurement Road Test Procedure, Standard

SAE J1083

Unauthorized Starting or Movement of Machines

SAE J1108

Truck and Truck Tractor Vehicle Identification Number Systems- 05/2006,

SAE J1112

Specification DefinitionsSkidderGrapple- 10/2003,

SAE J1113-25

Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsImmunity to Radiated Electromagnetic Fields, 10 KHz to 1000 MHzTri-Plate Line Method

SAE J1129

OPERATOR CAB ENVIRONMENT FOR HEATED, VENTILATED,

SAE J1140

Filler Pipes and Openings of Motor Vehicle Fuel Tanks, Recommended Practice- 4/2000,

SAE J1157

MEASUREMENT PROCEDURE FOR EVALUATION OF FULL - FLO- ,

SAE J1160

Operator Ear Sound Level Measurement Procedure for Snow Vehicles- 09/2004

SAE J1195

CYLINDER ROD WIPER SEAL INGRESSION TEST- 8/1993,

SAE J1221

HEADLAMP-TURN SIGNAL SPACING- 1/1988,

SAE J1234

Specification Definitions Off-Road Work Machines

SAE J1245

Guide to the Application and Use of Engine Coolant Pump Face Seals

SAE J1246

Measuring the Radius of Curvature of Convex Mirrors

SAE J1255

Specification Definitions - Feller/ Buncher

SAE J1256

Fuel Economy Measurement - Road Test Procedure - Cold Start and Warm-Up Fuel Economy, Recommended Practice

SAE J1265

Capacity Rating Dozer Blades

SAE J1282

Snowmobile Brake Control Systems

SAE J1371

(R) Hydraulic Excavator Swing Minimum Performance and Rating Procedure, Standard- 2/2002,

SAE J1380

THE MEASUREMENT OF HIGHWAY TRUCK AND BUS TIRE- 1/1988,

SAE J1385

Classification of Earthmoving Machines for Vibration Tests of Operator Seats

SAE J1419

Tapers for Shaft Ends and Hubs for Fuel Injection Pumps

SAE J1424

(R) Cargo Lamps for Use on Vehicles Under 5443 kg (12 000 lb) GVWR

SAE J1447

Fire-Resistant Fluid Usage in Hydraulic Systems of Off-Road Work Machines, Information Report-May 1986

SAE J1448

Electromagnetic Susceptibility Measurements of Vehicle Components Using TEM Cells (14 kHz-200 MHz), Information Report;- 7/1995,

SAE J1449

Small CraftGraphic Symbols

SAE J1489

(R) Heavy Truck and Bus Retarder Downhill Performance Mapping Procedure-May 2000

SAE J1491

(R) Vehicle Acceleration Measurement

SAE J1496

REPLACEABLE BULBS FOR HEADLAMPS- 1/1992,