|
SAE J154 |
Operator Space Envelope Dimensions for Off-Road Machines |
|
SAE J1556 |
Stationary Safety Glazing Replacement- 05/2004, |
|
SAE J1567 |
COLLISION DETECTION SERIAL DATA COMMUNICATIONS MUL- , |
|
SAE J1606 |
Headlamp Design Guidelines for Mature Drivers |
|
SAE J1624 |
Fuel Crossover Line |
|
SAE J1663 |
Truth-in-Labeling Standard for Navigation Map Databases, Standard-August 1995 |
|
SAE J1666 |
Electric Vehicle Acceleration, Gradeability, and Deceleration Test Procedure |
|
SAE J1683 |
MS-DOS Interface for SAE J1708 Communications- 06/2004, |
|
SAE J1685 |
Classification System for Automotive Acrylonitrile/Butadiene/Styrene (ABS) and ABS + Polycarbonate Blends (ABS+PC) Based Plastics- 03/2005, |
|
SAE J1691 |
Plastic Motor Vehicle Safety Glazingâ€â€Tolerances and Fabrication Details |
|
SAE J1700 |
Softening Point of Interior Trim Adhesives, Recommended Practice-April 1994 |
|
SAE J171 |
Measurement of Fuel Evaporative Emissions from Gasoline Powered Passenger Cars and Light Trucks Using the Enclosure Technique- 12/2000, |
|
SAE J1713 |
Structural Testing of Passenger Car and Truck Disc Brakes |
|
SAE J173 |
SPECIFICATION DEFINITIONS - DOZERS |
|
SAE J1735 |
(R) Harmonized Vehicle Headlamp Performance Requirements |
|
SAE J1746 |
ISP-Vehicle Location Referencing Standard |
|
SAE J1747 |
Recommended Methods for Conducting Corrosion Tests in Hydrocarbon Fuels or Their Surrogates and Their Mixtures with Oxygenated Additives |
|
SAE J1760 |
Data Security Services |
|
SAE J177 |
(R) Measurement of Carbon Dioxide, Carbon Monoxide, and Oxides of Nitrogen in Diesel Exhaust |
|
SAE J1784/ HIR 4544 |
Specifications and Standards for Marine Hydraulic Systems and Components- 8/2000, |
|
SAE J1805 |
Sound Power Level Measurements of Work Machines Static and In-Place Dynamic Methods |
|
SAE J1823 |
Specification DefinitionsArticulated Rubber-Tired Forwarder |
|
SAE J1852 |
Properties of Galvanized Low Carbon Sheet Steels and Their Relation to Formability, Information Report- 9/1997 |
|
SAE J1853 |
Hand Winches - Boat Trailer Type |
|
SAE J1863 |
Coach Joint Fracture Test, Recommended Practice-April 1987 |
|
SAE J1884 |
Vehicle Jack Requirements and Test Procedure-Supersedes J978 and J979: January 1967; 02/2005, |
|
SAE J1901 |
Lip Force Measurement - Radial Lip Seals |
|
SAE J1918 |
(R) Method for the Determination of Expansion and Water Absorption of Automotive Sealers |
|
SAE J1936 |
Chemical Methods for the Measurement of Nonregulated Diesel Emissions, Recommended Practice- 10/2002, |
|
SAE J1967 |
Retroreflective Materials for Vehicle Conspicuity |
|
SAE J1971 |
Radial Lip Seal TorqueMeasurement Method and Results |
|
SAE J2026 |
Recommended Practice for the Selection of Engineering Workstations, Recommended Practice- 7/1997, |
|
SAE J2043 |
Nonmetallic Fuel System Tubing, Standard- 11/1996, |
|
SAE J2054 |
E/E Diagnostic Data Communications, Information Report- 06/2001; |
|
SAE J2055 |
Identification Terminology and Component Nomenclature Knuckle Boom Log Loader- 06/2004 |
|
SAE J2056-1 |
Class C Application Requirement Considerations, Recommended Practice-No Replacement |
|
SAE J2094 |
(R) Vehicle and Control Modifications for Drivers with Physical Disabilities Terminology |
|
SAE J2129 |
Guidelines for Requests Received from Outside Sources for the Conag Council to Originate or Review Technical Reports, Information Report-November 1990 |
|
SAE J215 |
Continuous Hydrocarbon Analysis of Diesel Emissions |
|
SAE J216 |
(R) Motor Vehicle Glazing - Electrical Circuits |
|
SAE J2179 |
A Test for Evaluating the Rearward Amplification of Multi-Articulated Vehicles- 9/2000, |
|
SAE J2205 |
Expanded Diagnostic Protocol for OBD II Scan Tools, Recommended Practice- 7/1999, |
|
SAE J2211 |
Recommended Service Procedure for the Containment of HFC-134a (R-134a) |
|
SAE J2305 |
Hazard Reduction for Horizontal Earthboring Machines |
|
SAE J231 |
Minimum Performance Criteria for Falling Object Protective Structure (FOPS)- 3/1999 |
|
SAE J235 |
Electric Blower Motor Switch-May 1971 |
|
SAE J2366-4 |
ITS Data BusThin Transport Layer |
|
SAE J2374 |
Location Referencing Message Specification referencing Meassage Specification |
|
SAE J2384 |
Air Dryer Test Procedure |
|
SAE J2400 |
Human Factors in Forward Collision Warning Systems: Operating Characteristics and User Interface Requirements |
|
SAE J2437 |
Air Starter Motor Test Procedures |
|
SAE J2473 |
Self-Propelled Sweepers and Scrubbersâ€â€Maximum Gradient Rating During Hopper Discharge |
|
SAE J2496 |
Transport Area Network Cabling |
|
SAE J2510 |
Harmonized Front Fog Lamp- 01/2006,:2005 |
|
SAE J2531 |
Impulse Noise from Automotive Inflatable Devices |
|
SAE J2555 |
Vehicle Idle Gear Rattle Evaluation Procedure |
|
SAE J2556 |
Radiated Emissions (RE) Narrowband Data Analysis - Power Spectral Density (PSD) |
|
SAE J2633 |
Wheel and Wheel Trim Weathering Testing for Paint Coatings |
|
SAE J2683 |
Refrigerant Purity and Container Requirements for Carbon Dioxide (CO2 R-744) Used in Mobile Air-Conditioning Systems |
|
SAE J2695 |
Heavy Duty Vehicle Lubricating Greases |
|
SAE J2698 |
Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Designâ€â€Truck and Bus |
|
SAE J2739 |
Absorptive and Interference Coatings Applied on Replaceable Headlamp Bulbs |
|
SAE J274 |
Rated Suspension Spring Capacity- 10/2004, |
|
SAE J2810 |
HFC-134a (R-134a) Refrigerant Recovery Equipment for Mobile Automotive Air-Conditioning Systems |
|
SAE J296 |
(R) Excavator, Mini-Excavator, and Backhoe Hoe Bucket Volumetric Rating |
|
SAE J316 |
(R) Oil-Tempered Carbon- Steel Spring Wire and Springs, Recommended Practice- 6/1998, |
|
SAE J348 |
(R) Wheel Chocks-June 1990 |
|
SAE J35 |
Diesel Smoke Measurement Procedure |
|
SAE J362 |
Vehicle Hood Latch Systems, Recommended Practice- 06/1997; |
|
SAE J370 |
Bolt and Capscrew Sizes for Use in Construction and Industrial Machinery- 04/2006, |
|
SAE J382 |
(R) Windshield Defrosting Systems Performance Requirements - Trucks, Buses, and Multipurpose Vehicles- 09/2000; |
|
SAE J453C |
CHEMICAL COMPOSITIONS AND MECHANICAL AND PHYSICAL |
|
SAE J500 |
Serrated Shaft Ends- 11/2000, |
|
SAE J528 |
Seamless Copper Tube- 06/2006 |
|
SAE J538 |
Grounding of Storage Batteries, Standard;- 11/1998, |
|
SAE J580 |
Sealed Beam Headlamp Assemble- 1992, |
|
SAE J590 |
Turn Signal Flashers- 7/1999, |
|
SAE J598 |
Sealed Lighting Units for Construction, Industrial, and Forest Machinery- 12/1998, |
|
SAE J623 |
AUTOMOTIVE CARBURETOR FLANGES- , |
|
SAE J624 |
Tapped and Flanged Exhaust Connections for Small Engines- 7/2001, |
|
SAE J629 |
Diesel Fuel Injector Assembly - Flange Mounted Types 5 and 6 |
|
SAE J63 |
Hole Placement on Dozer End Bits, Recommended Practice- 6/1998, |
|
SAE J667 |
Brake Test Code - Inertia Dynamometer, Recommended Practice- 2/2002, |
|
SAE J71 |
CENTRAL FLUID SYSTEMS- 2/1988, |
|
SAE J715 |
Three-Point Free-Link Hitch Attachment of Implements to Agricultural Wheeled Tractors, Standard- 7/1996 |
|
SAE J716 |
Application of Hydraulic Remote Control to Agricultural Tractors and Trailing Type Agricultural Implements |
|
SAE J727 |
Nomenclature - Crawler Tractor- 2/2002, |
|
SAE J733 |
Nomenclature-Rippers and Scarifiers, Standard- 2/2002, |
|
SAE J734 |
Component Nomenclature - Dumper Trailer, Standard;- 6/2000, |
|
SAE J763 |
Aging of Carbon Steel Sheet and Strip, Information Report- 7/1997 |
|
SAE J764 |
Loading Ability Test ProcedureScrapers |
|
SAE J774 |
(R) Emergency Warning Device and Emergency Warning Device Protective Container |
|
SAE J821 |
Electrical Wiring Systems for Construction, Agricultural, and Off-Road Machines |
|
SAE J856 |
Connectors and Plugs, Standard- 1/1999, |
|
SAE J870 |
Component Nomenclature - Graders, Standard- 6/2000, |
|
SAE J966 |
(R) Test Procedure for Measuring Passenger Car Tire Revolutions per Mile-November 2000 |
|
SAE J980A |
Bumper Evaluation Test Procedure-Passenger Cars, Recommended Practice- 4/1997, |
|
SAE TSB 001 |
SAE Technical Standards Board Rules and Regulations, Technical Report;- 07/1998; |
|
SAE J1018 |
RECREATIONAL TRAILER VEHICLE IDENTIFICATION NUMBER SYSTEM- , |
|
SAE J103 |
LAG SCREWS- 1/1990 |
|
SAE J1030 |
Maximum Sound Level for Passenger Cars and Light Trucks, Recommended Practice |
|
SAE J1043 |
Performance Criteria for Falling Object Protective Structure (FOPS) for Industrial Machines, Standard- 3/1999 |
|
SAE J105 |
HEX BOLTS- 1/1990 |
|
SAE J1062 |
Snowmobile Passenger Handgrips |
|
SAE J1079 |
Overcenter Clutch Spin Test Procedure, Recommended Practice |
|
SAE J110 |
Seals - Testing of Radial Lip |
|
SAE J1104 |
SERVICE PERFORMANCE REQUIREMENTS FOR WARNING LAMP- 1/1989, |
|
SAE J111 |
Seals - Terminology of Radial Lip |
|
SAE J1113-23 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method, Recommended Practice |
|
SAE J1141 |
Air Cleaner Elements, Information Report- 10/1996, |
|
SAE J1150 |
Terminology for Agricultural Equipment |
|
SAE J1193 |
Nomenclature and Dimensions for Hydraulic Excavators, Recommended Practice- 3/2001, |
|
SAE J1209 |
Identification Terminology of Mobile Forestry Machines- 06/2004, |
|
SAE J1213 |
Glossary of Automotive Electronic Terms- 7/1996, |
|
SAE J1214 |
Tire to Body Clearance Check for Recreational Vehicles |
|
SAE J1215 |
PERFORMANCE PREDICTION OF DROLL9OVER PROTECTIVE STRUCTURES (ROPS) DTHROUGH ANALYTIDCAL METHOD- 6/1993, |
|
SAE J1216 |
Test Methods for Metric Threaded Fasteners, Standard- 7/1999, |
|
SAE J1243 |
(R) Diesel Emission Production Audit Test Procedure, Recommended Practice |
|
SAE J1254 |
Component Nomenclature - Feller Buncher |
|
SAE J1262 |
Sound Measurement - Trenching Machines, Standard- 7/1999, |
|
SAE J1274 |
PERFORMANCE REQUIREMENTS FOR THE AUTOMOTIVE AUDIO- 1/1991, |
|
SAE J1295 |
Identification Terminology and Specification Definitions Pipelayers and Side Booms, Tractor or Loader Mounted-Superseded by SAE J/ISO 7136 |
|
SAE J132 |
(R) Oil-Tempered Chromium-Vanadium Valve Spring Quality Wire and Springs, Recommended Practice- 6/1998, |
|
SAE J1322 |
PREFERRED CONVERSION VALUES FOR DIMENSIONS IN LIGHTING - INCH POUND UNITS/SI- 9/1993, |
|
SAE J1329 |
Minimum Performance Criteria for Braking Systems for Specialized Rubber-Tired, Self- Propelled Underground Mining Machines, Recommended Practice;- 2/2002, |
|
SAE J1347 |
(R) Guide to Manifold Absolute Pressure Transducer Representative Specification |
|
SAE J1376 |
Fuel Economy Measurement Test (Engineering Type) for Trucks and Buses, Recommended Practice- 11/1997, |
|
SAE J1379 |
ROLLING RESISTANCE MEASURMENT PROCEDR/TRK & BUS TIRE- 1/1988, |
|
SAE J1382 |
Classification, Nomenclature, and Specification Definitions for Trenching Machines, Standard-Supreseded by SAE JISO 13539 |
|
SAE J1398 |
Stop Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width, Standard- 8/1996, |
|
SAE J1423 |
(R) Classification of Energy-Conserving Engine Oil for Passenger Cars, Vans, Sport Utility Vehicles, and Light-Duty Trucks |
|
SAE J1446 |
On-Machine Alarm Test and Evaluation Procedure for Construction and General Purpose Industrial Machinery |
|
SAE J1461 |
Manual Slack Adjuster Test Procedure |
|
SAE J1507 |
Anechoic Test Facility Radiated Susceptibility 20MHz to 18GHz Electromagnetic Field, Information Report;- 7/1995, |
|
SAE J1538 |
(R) Glossary of Automotive Inflatable Restraint Systems |
|
SAE J1544 |
Revolutions per Mile and Static Loaded Radius for Off-Road Tires, Standard-January 1988 |
|
SAE J155 |
Service Brake System Performance Requirements - Light-Duty Truck- 1989, |
|
SAE J1553 |
(R) Cross Peel Test for Automotive-Type Adhesives for Fiber- Reinforced Plastic (FRP) Bonding, Recommended Practice-April 1995 |
|
SAE J1583 |
Controller Area Network (CAN), An In-Vehicle Serial Communication Protocol, Information Report- 7/1995, |
|
SAE J1635 |
SAE Cold Start and Driveability Procedure- 10/2002, |
|
SAE J1642 DRAFT |
Medium- and Heavy-Duty Truck Converter/Muffler Configuration, Technical Report- 11/2001, |
|
SAE J1668 |
Diesel Engines - Fuel Injection Pump Testing |
|
SAE J1669 |
Passenger Compartment Air Filter Test Code, Recommended Practice |
|
SAE J170 |
MEASUREMENT OF FUEL EVAPORATIVE EMMISSIONS-TRAP ME- , |
|
SAE J1725 |
Structural Modification for Personally Licensed Vehicles to Meet the Transportation Needs of Persons with Disabilities |
|
SAE J1752-2 |
(R) Measurement of Radiated Emissions from Integrated CircuitsSurface Scan Method (Loop Probe Method) 10 MHz to 3 GHz |
|
SAE J1763 |
A Conceptual ITS Architecture: An Atis Perspective |
|
SAE J1770 |
Automotive Refrigerant Recovery/Recycling Equipment Intended for Use with Both R12 and R134a, Standard-October 1995 |
|
SAE J1790 |
Self-Propelled Sweepers and Scrubbers Steering Requirements Single-Circuit Hydraulic Servo-Assisted Systems |
|
SAE J1858 |
Full Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance, Standard |
|
SAE J1881 |
Initial Graphics Exchange Specification, Recommended Practice- 11/2001, |
|
SAE J1900 |
Seals - Bond Test Fixture and Procedure |
|
SAE J1947 |
O.D. Coatings for Radial Lip-Type Shaft Seals |
|
SAE J2022 |
Classification, Nomenclature, and Specification Definitions for Horizontal Earthboring Machines |
|
SAE J2023 |
Operating Precautions for Horizontal Earthboring Machines |
|
SAE J2038 |
(R) Engine Weight, Dimensions, Center of Gravity, and Moment of Inertia- 6/2000, |
|
SAE J2057-1 |
Class A Application/Definition |
|
SAE J2131 |
Front-Mounted Linkage for Agricultural Wheeled Tractors, Standard- 7/1996 |
|
SAE J2224 |
Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging |
|
SAE J2296 |
Retest of Refrigerant Container |
|
SAE J2352 |
Mayday Industry Survey Information Report |
|
SAE J2355 |
ITS Data Bus Architecture Reference Model Information Report |
|
SAE J2356 |
A Graphical Model for Interactive Distributed Control |
|
SAE J2366-1 |
ITS Data Bus - IDB-C Physical Layer |
|
SAE J2366-2 |
Link Layer |
|
SAE J2395 |
ITS In-Vehicle Message Priority |
|
SAE J2429 |
Free-Rolling Cornering Test for Truck and Bus Tires |
|
SAE J2540 |
Messages for Handling Strings and Look-Up Tables in ATIS Standards |
|
SAE J2576 |
Blade Fuses - 42 V System |
|
SAE J258 |
Circuit Breaker - Internal Mounted - Automatic Reset |
|
SAE J2594 |
Recommended Practice To Design For Recycling Proton Exchange Membrane (PEM) Fuel Cell Systems |
|
SAE J2630 |
Converting ATIS Message Standards From ASN.1 to XML |
|
SAE J2635 |
Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim |
|
SAE J273 |
Passenger Car Vehicle Identification Number System- 05/2006, |
|
SAE J2735 |
Dedicated Short Range Communications (DSRC) Message Set Dictionary |
|
SAE J2758 |
Determination of the Maximum Available Power from a Rechargeable Energy Storage System on a Hybrid Electric Vehicle |
|
SAE J2784 |
FMVSS 135 Inertia Dynamometer Test Procedure |
|
SAE J2799 |
70 MPa Compressed Hydrogen Surface Vehicle Fueling Connection Device and Optional Vehicle to Station Communications |
|
SAE J2818 |
Keyword Protocol 1281 |
|
SAE J311 |
Fluid for Passenger Car Type Automatic Transmissions |
|
SAE J332 |
Testing Machines for Measuring the Uniformity of Passenger Car and Light Truck Tires |
|
SAE J363 |
Filter-Base Mounting |
|
SAE J389B |
UNIVERSAL SYMBOLS FOR OPERATOR CONTROLS- 1/1987 |
|
SAE J391 |
Definition for Particle Size |
|
SAE J408 |
Methods of Sampling Steel for Chemical Analysis- 5/1999 |
|
SAE J421 |
CLEANLINESS RATING OF STEELS BY THE MAGNETIC PARTICLE METHOD- , |
|
SAE J53 |
Minimum Performance Criteria for Emergency Steering of Wheeled Earthmoving Construction Machines- 7/1993 |
|
SAE J57 |
Sound Level of Highway Truck Tires |
|
SAE J687 |
Nomenclature - Truck, Bus, Trailer, Standard;- 12/1998, |
|
SAE J717 |
Auxiliary Power Take-Off Drives for Agricultural Tractors- 7/1996 |
|
SAE J725 |
Mounting Brackets and Socket for Warning Lamp and Slow-Moving Vehicle (SMV) Identification Emblem, Standard; |
|
SAE J728 |
Component Nomenclature - Scrapers, Standard- 6/2000, |
|
SAE J742 |
Capacity Rating-Loader Bucket, Standard;- 2/2000, |
|
SAE J756 |
Marine Propeller-Shaft Couplings- 04/2005 |
|
SAE J833 |
(R) Human Physical Dimensions |
|
SAE J895 |
Five Conductor Electrical Connectors for Automotive Type Trailers, Recommended Practice- 1/1999, |
|
SAE J897 |
Machine Slope Operation Test Code |
|
SAE J916 |
RULES FOR SAE USE OF SI (METRIC) UNITS- 1/1992 |
|
SAE J929A |
PISTON RINGS AND PISTONS- 1/1990, |
|
SAE J937B |
Service Brake System Performance Requirements - Passenger Car, Recommended Practice- 1/1989, |
|
SAE J984 |
BODYFORMS FOR USE IN MOTOR VEHICLE PASSANGER COMPARTMENT IMPACT DEVELOPMENT- , |
|
SAE J996 |
INVERTED VEHICLE DROP TEST PROCEDURE- 12/1998, |
|
SAE J998 |
MINIUM REQURMNTS, MOTOR VEHICLE LININGS- , |