 |
| Purchase Information |
| Use this form to request purchase information on SAE online subscriptions. |
|
|
Document SAE AMS-S-8802B is offered by IHS as part of an online subscription. This subscription contains many documents on the same topic.
You may also purchase this document alone from the IHS Standards Store.
SAE AMS-S-8802B Document Information:
Title
Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion
SAE International
Publication Date:
Mar 1, 2005
Scope:
Form:
This specification covers temperature resistant, two-component
synthetic rubber compounds of the
polysulfide type for sealing and repairing integral fuel tanks and
fuel cell cavities, for
continuous service use from −65 to +250 °F (−54 to 121
°C).
Application:
This sealing compound has been used typically for fuel tank sealing,
cabin pressure sealing, and
aerodynamic smoothing, but usage is not limited to such applications.
It can be used for faying
surface sealing, for wet-installation of fasteners, for overcoating
fasteners, and for sealing
joints and seams. The sealing compound can be used in fuel areas as
well as in non-fuel areas. It
may in some cases be used as a non-structural adhesive. It cures at
room temperature and the cure
can be accelerated by higher temperatures.
AMS 3100 adhesion promoter can be applied prior to application of the
sealant.
Classification:
Sealing compounds covered by this specification are classified as
follows:
Type 1 - Dichromate Cured Sealant. Material with a dichromate curing
agent.
Type 2 - Manganese Dioxide Cured Sealant. Material with a manganese
dioxide curing agent.
Both Type 1 and Type 2 sealing compounds shall be supplied in the
following classes:
Class A - Suitable for application by brush. Available in the
following application times in hours:
A-1/2
A-1
A-2
Class B - Suitable for application by extrusion gun, spatula, brush,
or roller. Available in the
following application times in hours:
B-1/2
B-1
B-2
B-4
Class C - Suitable for extrusion gun or spatula. Available in the
following application times in
hours:
Notation: ( ) Assembly time in hours:
C-8(20)
C-24(80)
Safety - Hazardous Materials:
Shall be in accordance with AS5502 (1.1).
Keywords:
- Sealant
- polysulfide
- integral fuel tanks
- fuel cell
- high adhesion
About IHS
IHS (NYSE: IHS) is a leading global provider of critical technical information, decision-support tools and related services in a number of industries including aerospace and defense, automotive, construction, electronics, and energy. IHS serves customers ranging from large governments and multinational corporations to smaller companies and technical professionals in more than 100 countries. IHS been in business for more than 45 years and employ more than 2,300 people around the world.
