IEEE 1313.2: Guide for the Application of Insulation Coordination
SDO: IEEE: The Institute of Electrical and Electronics Engineers, Inc.
DOD Adopted ANSI Approved Approved
The insulation coordination standard and guide apply to three-phase ac systems above 1 kV and are divided into two parts.
IEEE Std 1313.1-1996 (Part 1) specifies the procedure for selection of the withstand voltages [basic lightning impulse insulation level (BIL) and basic switching impulse insulation level (BSL)] for equipment phase-ground and phase-phase insulation systems. It also identifies a list of standard insulation levels. Although the principles of this standard also apply to transmission line insulation systems, the insulation levels may be different from those identified as standard insulation levels.
This guide (Part 2) is an application guide with practical examples, intended to provide guidance in the determination of the withstand voltages and to suggest calculation methods and procedures. The insulation coordination examples for selected equipment are designed to explain the principles of Part 1. The guide is intended for air-insulated ac systems; caution should be exercised in the case of gas-insulated systems (GIS).
- protective margin
- atmospheric correction factor
- ground fault factor
- protective radio
- standard withstand voltages
- phase-to-ground insulation configuration
- insulation design
- insulation coordination
- voltage stress
- basic switching impulse insulation level (BSL)
- phase-to-phase insulation configuration
- shielding failures
- basic lightning impulse level (BIL)
- crest value
Buy this Standard Now
Or if you answer yes to any of these questions:
- Do you purchase more than $3000 in standards per year?
- Do you purchase many different kinds of standards?
- Do you have multiple employees accessing the same standards?
You may save money by purchasing more comprehensive online access.
* Required field