ASTM B 862 REV A Standard Specification for Titanium and Titanium Alloy Welded Pipe

Purchase Information

Use this form to request purchase information on ASTM online subscriptions.

First Name:

Last Name:

Email address:

Document ASTM B 862 REV A is offered by IHS as part of an online subscription. This subscription contains many documents on the same topic.

You may also purchase this document alone from the IHS Standards Store.

ASTM B 862 REV A Document Information:

Title
Standard Specification for Titanium and Titanium Alloy Welded Pipe

ASTM International

Publication Date:
Aug 1, 2008

Scope:

This specification covers the requirements for 33 grades of titanium and titanium alloy welded pipe intended for general corrosion resisting and elevated temperature service as follows:

Grade 1—Unalloyed titanium, low oxygen,

Grade 2—Unalloyed titanium, standard oxygen,

Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS),

Grade 3—Unalloyed titanium, medium oxygen,

Grade 5—Titanium alloy (6 % aluminum, 4 % vanadium),

Grade 7—Unalloyed titanium plus 0.12 to 0.25 % palladium, standard oxygen,

Grade 7H—Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS),

Grade 9—Titanium alloy (3 % aluminum, 2.5 % vanadium),

Grade 11—Unalloyed titanium plus 0.12 to 0.25 % palladium, low oxygen,

Grade 12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),

Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium), low oxygen,

Grade 14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium), standard oxygen,

Grade 15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium), medium oxygen,

Grade 16—Unalloyed titanium plus 0.04 to 0.08 % palladium, standard oxygen,

Grade 16H—Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS),

Grade 17—Unalloyed titanium plus 0.04 to 0.08 % palladium, low oxygen,

Grade 18—Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.04 to 0.08 % palladium),

Grade 19—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),

Grade 20—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 to 0.08 % palladium,

Grade 21—Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),

Grade 23—Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI),

Grade 24—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 to 0.08 % palladium,

Grade 25—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 to 0.8 % nickel and 0.04 to 0.08 % palladium,

Grade 26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

Grade 26H—Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),

Grade 27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

Grade 28—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,

Grade 29—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements (ELI)) plus 0.08 to 0.14 % ruthenium,

Grade 33—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

Grade 34—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

Grade 35—Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),

Grade 37—Titanium alloy (1.5 % aluminum), and

Grade 38—Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron).

NOTE 1—H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum UTS, and may always be certified as meeting the requirements of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are intended primarily for pressure vessel use.

The H grades were added in response to a user association request based on its study of over 5200 commercial Grade 2, 7, 16, and 26 test reports, where over 99 % met the 58 ksi minimum UTS.

Pipe 8 in. NPS (nominal pipe size) and larger is most frequently custom made for an order. In such cases, the purchaser carefully should consider the applicability of this specification. Since the pipe is custom made, the purchaser may choose a wall thickness other than those in Table 1 to meet specific operating conditions. The purchaser may also be better served to specify only the portions of this specification that are required to meet the operating conditions (for example, annealing, flattening test, chemistry, properties, etc.).

Optional supplementary requirements are provided for pipe where a greater degree of testing is desired. These supplementary requirements may be invoked by the purchaser, when desired, by specifying in the order.

The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Keywords:

pipe
titanium
titanium alloy
welded pipe

About IHS
IHS (NYSE: IHS) is a leading global provider of critical technical information, decision-support tools and related services in a number of industries including aerospace and defense, automotive, construction, electronics, and energy. IHS serves customers ranging from large governments and multinational corporations to smaller companies and technical professionals in more than 100 countries. IHS been in business for more than 45 years and employ more than 2,300 people around the world.