 |
| Purchase Information |
| Use this form to request purchase information on SAE online subscriptions. |
|
|
Document SAE J516 is offered by IHS as part of an online subscription. This subscription contains many documents on the same topic.
You may also purchase this document alone from the IHS Standards Store.
SAE J516 Document Information:
Title
(R) Hydraulic Hose Fittings
SAE International
Publication Date:
Sep 1, 2009
Scope:
This SAE Standard provides general and dimensional
specifications for the most common hose fittings used in
conjunction with hydraulic hoses specified in SAE J517 and utilized
in hydraulic systems on mobile and stationary equipment.
The general specifications contained in Sections 1 through 15
are applicable to all hydraulic hose fittings and supplement the
detailed specifications for the 100R-series fittings contained in
the later sections of this document.
This document shall be utilized as a procurement document only
to the extent agreed upon by the manufacturer and user.
Refer to SAE J517 for specifications of hose and information on
hose assemblies. SAE J1273 contains information on application
factors affecting hose fittings, hose, and hose assemblies.
THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE
J516 FITTINGS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE
TWO WORKING PRESSURE RATED VALUES.
The following are hose fitting types contained in this
document:
a. Male dryseal pipe thread hose fittings shall be as shown in
Figure 2 for the respective styles, and in Table 2 for the
applicable hoses and sizes.
b. Male straight thread O-ring hose fittings shall be as shown
in Figure 3 or the respective styles, and in Table 3 for the
applicable hoses and sizes.
c. Male 37° flare hose fittings shall be as shown in Figure 4
for the respective styles, and in Table 4 for the applicable hoses
and sizes.
d. Female 37° flare hose fittings shall be as shown in Figures 5
to 5B for the respective styles and shapes, and in Tables 5 to 5B
for the applicable hoses and sizes.
e. Male 45° flare hose fittings shall be as shown by the 37°
figures and tables.
f. Female 45° flare hose fittings shall be as shown by the 37°
figures and tables.
g. Male flareless 24° cone hose fittings shall be as shown in
Figure 6 and in Table 6 for the applicable hoses and sizes.
h. Female flareless 24° cone hose fittings shall be as shown in
Figure 7 and in Table 7 for the applicable hoses and sizes.
i. 4-bolt split flange hose fittings shall be as shown in
Figures 8 to 8F for the respective styles and shapes, and in Tables
8 to 8F for the applicable hoses and sizes.
j. Male O-ring face seal hose fittings shall be as shown in
Figure 9 for the respective styles, and in Table 9 for the
applicable hoses and sizes.
k. Female O-ring face seal hose fittings shall be as shown in
Figures 10 to 10B for the respective styles, and Tables 10 to 10B
for the applicable hoses and sizes.
It is recommended that where step sizes or additional types of
fittings are required, they be designed to conform with the
specifications of this document insofar as they may apply. The
following general specifications shall supplement the dimensional
data contained in the tables with respect to all unspecified
detail.
About IHS
IHS (NYSE: IHS) is a leading global provider of critical technical information, decision-support tools and related services in a number of industries including aerospace and defense, automotive, construction, electronics, and energy. IHS serves customers ranging from large governments and multinational corporations to smaller companies and technical professionals in more than 100 countries. IHS been in business for more than 45 years and employ more than 2,300 people around the world.
