| Building Codes, Standards & Documents |
AASHTO HB
Standard Specifications For Highway Bridges |
AASHTO LRFD-CONS AMD
AASHTO LRFD Bridge Construction Specifications-Second Edition |
ACI 318M
Metric Building Code Requirements for Structural Concrete and Commentary |
AISC 326
Detailing for Steel Construction |
AISE TR NO. 13
Guide for the Design and Construction of Mill Buildings |
ASCE 7-05
Minimum Design Loads for Buildings and Other Structures |
ANSI A117.1
Accessible And Usable Buildings And Facilities |
ANSI A14.3
American National Standard For Fixed Ladders - Safety Requirements |
ANSI Z97.1
Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test |
API RP 1595
Design, Construction, Operation, Maintenance, and Inspection of Aviation Pre-Airfield Storage Terminals-First Edition |
ASHRAE 62.1
Ventilation For Acceptable Indoor Air Quality |
ASHRAE 62.2
Ventilation And Acceptable Indoor Air Quality In Low-Rise Residential Buildings |
ASHRAE 90.1 I-P
Energy Standard for Buildings Except Low-Rise Residential Buildings |
ASME A112.18.1
Plumbing Supply Fittings |
ASME A17.2
Guide For Inspection Of Elevators, Escalators, And Moving Walks - Includes Inspection Procedures For Electric Traction And Winding Drum Elevators, Hydraulic Elevators, And Escalators And Moving Walks |
ASME B16.11
Forged Fittings, Socket-Welding And Threaded |
ASSE 1010
Performance Requirements For Water Hammer Arresters |
ASSE A1 0.4
Personnel Hoists and Employee Elevators on Construction and Demolition Sites American National Standard for Construction and Demolition Operations |
ASSE A10.8
Safety Requirements For Scaffolding - American National Standard For Construction And Demolition Operations |
ASTM 01.03
Steel-Plate, Sheet, Strip, Wire; Stainless Steel Bar |
ASTM 01.05
Steel - Bars, Forgings and Billets, Bearing Chain, Tool |
ASTM 04.07
Building Seals And Sealants; Fire Standards; Dimension Stone |
ASTM 04.11
Building Constructions (I): E 72 - E 1670 |
ASTM E 1300
Standard Practice for Determining Load Resistance of Glass in Buildings |
AWS D1.5M
Bridge Welding Code |
Battelle MMPDS-04
Metallic Materials Properties Development and Standardization (MMPDS) |
BSI BS 5502-25
Buildings and Structures for Agriculture |
BSI BS 5588-8
Fire precautions in the design, construction and use of buildings Part 8: Code of practice for means of escape for disabled people-AMD 14992:December 8, 2004; Supersedes BS 5588-8:1998 |
BSI BS 5950-1
Structural Use Of Steelwork In Building - Part 1: Code Of Practicefor Design - Rolled And Welded Sections |
BSI BS 6399-2
Loading for Buildings - Part 2: Code of Practice for Wind Loads- |
BSI BS 7608
Code Of Practice For Fatique Design And Assessment Of Steel Structures |
BSI BS 8200
Code of Practice for Design of Non-Load Bearing External Vertical Enclosures of Buildings |
BSI NA TO BS EN 1991-1-1
UK National Annex to Eurocode 1: Actions on structures — Part 1-1: General actions — Densities, self-weight, imposed loads for buildings |
BSI NA TO BS EN 1992-1-1
UK National Annex to Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings |
BSI NA TO BS EN 1998-1
UK National Annex to Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings |
CSA A23.1-04/A23.2-04-CAN/CSA UPD 3
Concrete Materials and Methods of Concrete Construction/ Methods of Test and Standard Practices for Concrete |
IAPMO PLUMBING CODE
Uniform Plumbing Code |
ICC IBC
International Building Code |
ICC IRC
International Residential Code |
ICC IEBC
International Existing Building Code |
ICC IMC
International Mechanical Code |
ICC IPC
International Plumbing Code |
ICC PCBF
International Performance Code for Building and Facilities |
ICC ICC/ANSI 2.0
Manufactured Housing Construction and Safety Standards (MHCSS) |
IEC 60364-5-51
Electrical installations of buildings – Part 5-51: Selection and erection of electrical equipment – Common rules-Edition 5 |
IEC 60364-5-52
Electrical Installations of Buildings - Part 5-52: Selection and Erection of Electrical Equipment - Wiring Systems-Second Edition; Compiled from and Replaces IEC 60364-5-523(1999) |
IEC 60364-5-53
Electrical Installations of Buildings - Part 5-53: Selection and Erection of Electrical Equipment - Isolation, Switching and Control |
IEC 60364-5-54
Electrical Installations of Buildings - Part 5-54: Selection and Erection of Electrical Equipment - Earthing Arrangements, Protective Conductors and Protective Bonding Conductors |
IESNA RP 7
Practice For Industrial Lighting |
IHS DRM
Drawing Requirements Manual (bound) - Eleventh Edition |
ISO 10137
Bases for design of structures — Serviceability of buildings and walkways against vibrations-Second Edition |
ISO HDBK TECH DRAWINGS V2
Technical Drawings - Volume 2: Mechanical Engineering Drawings - Construction Drawings - Drawing Equipment |
NBBPVI NB 23
National Board Inspection Code |
NEMA TC 3
Polyvinyl Chloride (Pvc) Fittings For Use With Rigid PVC Conduit And Tubing |
NEMA TC 6 & 8
Polyvinyl Chloride (PVC) Plastic Utilities Duct For Underground Installations |
NEMA TC 9
Fittings For Polyvinyl Chloride (PVC) Plastic Utilities Duct For Underground Installation |
NFPA 13 SET
Automatic Sprinkler Systems Standard and Handbook Set |
NFPA 70 HDBK CD SET
National Electrical Code |
NFPA 72
National Fire Alarm Code |
NFPA 90A
Standard For The Installation Of Air-Conditioning And Ventilating Systems |
SBCCI SBC
Standard Building Code |
SMACNA 1520
Round Industrial Duct Construction Standards-Second Edition |
SMACNA 1922
Rectangular Industrial Duct Construction Standards-Second Edition; IP Version; Errata |
TIA-862
Building Automation Systems Cabling |
UL 263
UL Standard for Safety Fire Tests of Building Construction and Materials-Thirteenth Edition; Reprint with revision through and including October 24, 2007 |