| Electronics & Telecommunications Standards |
ATIS T1.113
Telecommunications - Signalling System No. 7 (SS7) - Integrated Services Digital Network (ISDN) User Part - Supplement A and B Incorporated |
BSI EN 50155
Railway applications - Electronic equipment used on rolling stock |
CEA-2014-A ERTA
Web-Based Protocol and Framework for Remote User Interface on UPnP (TM) Networks and the Internet (Web4CE) |
CEA 2017.1
Serial Communication Protocol for Portable Electronic Devices |
CEA 2033
OpenEPG (TM) – A Specification for Electronic Program Guide Data Interchange |
GEIA STD 0005-2
Standard for Mitigating the Effects of Tin Whiskers in Aerospace and High Performance Electronic Systems |
ICEA S-84-608
Telecommunications Cable Filled, Polyolefin Insulated, Copper Conductor - Fourth edition |
ICEA S-85-625
Telecommunications Cable Aircore, Polyolefin Insulated, Copper Conductor Technical Requirements - Fourth edition |
IEC 60065
Audio, video and similar electronic apparatus – Safety requirements - Edition 7.1; Consolidated Reprint |
IEC 60068-2-64
Environmental Testing - Part 2-64: Tests - Test Fh: Vibration, Broadband Random and Guidance |
IEC 60529
Degrees of Protection Provided by Enclosures (IP Code) |
IEC 60571
Electronic Equipment Used on Rail Vehicles - Edition 2.1; Consolidated Reprint |
IEC 60950-1
Information Technology Equipment - Safety - Part 1: General Requirements |
IEC 61010-1
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements |
IEC TR 61340-5-2
Electrostatics – Part 5-2: Protection of electronic devices from electrostatic phenomena – User guide - Edition 1.0 |
IEC 61508 SET
Functional Safety of Electrical/Electronic/Programmable Electronic Safety - Related Systems Set |
IEC 61508 SET
Functional Safety of Electrical/Electronic/programmable Electronic Safety - Related Systems Set - Contains IEC 61508-1 Through IEC 61508-7 |
IEC CISPR 22
Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement |
IEEE 315
Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Class Designation Letters) - CSA Z99-75; Includes supplement to ANSI Y32.2-75 and IEEE 315-75 |
IEEE C63.4
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz - Revision of ANSI C63.4-2001 |
IEEE 1100
Recommended Practice for Powering and Grounding Electronic Equipment - IEEE Emerald Book (Color Book Series) |
IEEE 802.3
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements. Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer |
IPC A 610
Acceptability of Electronic Assemblies |
IPC J-STD-006B
Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications |
IPC 7711A/7721A
Rework, Modification and Repair of Electronic Assemblies |
ISO 802.11R
Information technology— Telecommunications and information exchange between systems— Local and metropolitan area networks— Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: Fast Basic Service Set (BSS) Transition - IEEE Computer Society |
ISO 13239
Information Technology - Telecommunications and Information Exchange between Systems - High-Level Data Link Control (HDLC) Procedures - Third Edition; Replaces ISO/IEC 3309, 7809, 8471, and 8885 |
ISO 16750-3
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads - Second Edition |
ISO 7779
Acoustics - Measurement of Airborne Noise Emitted by Information Technology and Telecommunications Equipment - Second Edition; Amendment 1: 3/01/2003 |
NEMA 250
Enclosures for Electrical Equipment (1000 Volts Maximum) |
NEMA HP 3
Electrical and Electronic PTFE (Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire; Types ET (250 Volts), E (600 Volts), and EE (1000 Volts) - Errata: 10/04/2002 |
NEMA MG 1
Motors and Generators. |
RTCA DO-254
Design Assurance Guidance for Airborne Electronic Hardware |
TIA 41.000-E-4
Introduction to Mobile Application Part (MAP) - Addendum 4 to TIA-41.000-E |
TIA/EIA 41-D-1
Cellular Radiotelecommunications Intersystem Operations Addendum 1 - Addendum No. 1 to TIAIEIA-41-D |
TIA 102.BACA-3
Project 25 Inter-RF Subsystem Interface Messages and Procedures for Voice Services and Mobility Management Services |
TIA/EIA 568 SET
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard - Revision B; Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.1-7, B.2-1, B.2-2, B.2-3, B.2-4, B.Errata, B.2-5, B.2-6, B.2-9, B.2-11, and B.3-1 12/02/2005 |
TIA 569
Commercial Building Standard for Telecommunications Pathways and Spaces |
TIA 570
Residential Telecommunications Infrastructure Standard |
TIA 603
Land Mobile FM or PM - Communications Equipment - Measurement and Performance Standards |
TIA J-STD-607-A
Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications |
TIA 758-A
Customer-owned Outside Plant Telecommunications Infrastructure Standard |
TIA 942-1
Data Center Coaxial Cabling Specifications and Application Distances |
TIA/EIA 568 SET
Commercial Building Telecommunications Cabling Standards Set - Part 1: General Requirements; Part 2: Balanced Twisted-Pair Cabling Components; Part 3: Optical Fiber Cabling Components Standard (Includes all Addenda and Errata) |
TIA 810-B
Telecommunications Telephone Terminal Equipment Transmission Requirements for Narrowband Digital Telephones |
TIA 968-A-5
Telecommunications Telephone Terminal Equipment Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 5 to TIA-968-A |
TIA 920
Telecommunications Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones TIA-920 |
TIA 1063
Telecommunications User Premises Equipment Analog Telephone Port Requirements for Packet-based User Premises Terminal Adapters |
TIA 1096-A
Telecommunications Telephone Terminal Equipment Connector Requirements for Connection of Terminal Equipment to the Telephone Network |
UL 1642
UL Standard for Safety Lithium Batteries |