IHS Inc. The Source for Critical Information and Insight
All Industries |  Change  

Go
 
 

Wind Energy Standards & Documents

Updated September 24, 2008

Wind energy standards address turbines, gearboxes, power station equipment, certification, WECS, offshore structures, interconnection and other topics.

A selected list of wind energy standards is displayed below.

These standards were developed by the American Gear Manufacturers Association (AGMA), British Standards Institution (BSI), Canadian Standards Association (CSA), Deutsches Institut für Normung e.V (DIN), Danish Standards Association (DS), International Electrotechnical Commission (IEC) and Institute of Electrical and Electronics Engineers Inc. (IEEE).

Wind Energy Standards
AGMA 6006-A03
Standard for Design and Specification of Gearboxes for Wind Turbines - Supersedes AGMA 921-A97
BSI BS EN 45510-5-3
Guide for Procurement of Power Station Equipment - Part 5-3: Wind Turbines
BSI BS EN 50308
Wind turbines Protective measures Requirements for design, operation and maintenance
BSI PD CLC/TR 50373
Wind turbines Electromagnetic compatibility
BSI BS EN 61400-12
Wind Turbine Generator Systems - Part 12: Wind Turbine Power Perfomance Testing - IEC 61400-12: 1998;
BSI PD IEC WT 01
IEC System for Conformity Testing and Certification of Wind Turbines - Rules and Procedures
CSA F417-M91-CAN/CSA
Wind Energy Conversion Systems (WECS) - Performance - General Instruction No 1
DIN DIN EN 61400-25-4
(DRAFT) Wind turbines - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to XML based communication profile (IEC 88/241/CDV:2005); German version prEN 61400-25-4:2005, text in English
DS DS/EN 61400-12-1
Wind turbines - Part 12-1: Power performance measurements of electricity producing wind turbines
DNV DNV-OS-J101
Design of Offshore Wind Turbine Structures - Incorporates Amendment: 10/2007
GOST R 51237
Nontraditional power engineering. Wind power engineering. Terms and definitions
IEC 60050-415
International Electrotechnical Vocabulary - Part 415: Wind Turbine Generator Systems
IEC 61400 SET
Wind turbine generator systems - ***Contains All IEC 61400 Standards***
IEC 61400-1
Wind turbines – Part 1: Design requirements-Edition 3
IEC 61400-2
Wind turbines – Part 2: Design requirements for small wind turbines-Edition 2.0
IEC 61400-11
Wind turbine generator systems – Part 11: Acoustic noise measurement techniques-Edition 2.1; Consolidated Reprint
IEC 61400-12
Wind Turbine Generator Systems - Part 12: Wind Turbine Power Performance Testing-First Edition
IEC 61400-12-1
Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbines-Edition 1; Supersedes IEC 61400-12: 1998
IEC 61400-21
Wind turbines – Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines-Edition 2.0
IEC 61400-25-1
Wind turbines – Part 25-1: Communications for monitoring and control of wind power plants – Overall description of principles and models-Edition 1.0
IEC 61400-25-2
Wind turbines – Part 25-2: Communications for monitoring and control of wind power plants – Information models-Edition 1.0
IEC 61400-25-3
Wind turbines – Part 25-3: Communications for monitoring and control of wind power plants – Information exchange models-Edition 1.0
IEC 61400-25-4
Wind turbines – Part 25-4: Communications for monitoring and control of wind power plants – Mapping to communication profile-Edition 1.0
IEC 61400-25-5
Wind turbines – Part 25-5: Communications for monitoring and control of wind power plants – Conformance testing-Edition 1.0
IEC TR 61400-24
Wind Turbine Generator Systems - Part 24: Lightning Protection-First Edition
IEC TS 61400-13
Wind Turbine Generator Systems - Part 13: Measurement of Mechanical Loads-First Edition
IEC TS 61400-14
Wind turbines Part 14: Declaration of apparent sound power level and tonality values-Edition 1
IEC TS 61400-23
Wind Turbine Generator Systems - Part 23: Full-Scale Structural Testing of Rotor Blades-First Edition
IEEE 1547
IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems

To view more standards, regulations and documents, please visit the IHS standards store.

ENGINEERING STANDARDS NEWS
November 18, 2009
ANSI/ASSE Z359.0 Revises Workplace Fall Protection Guidelines
The American Society of Safety Engineers (ASSE) revised American National Standards Institute (ANSI)/ASSE Z359.0-2009 - Definitions and Nomenclature ... more
November 5, 2009
ISO, ILAC, IAF Streamline Quality Mgmt. Requirements for Medical Labs
In a joint communiqué by the International Organization for Standardization (ISO), the International Laboratory Accreditation Cooperation (ILAC) ... more
October 30, 2009
ASTM D7558 Addresses Medical Glove Allergens
ASTM International issued a standard that allows rubber glove manufacturers to monitor the level of residual chemicals in their end products ... more
October 30, 2009
ANSI Begins Accreditation Under Toy Safety Certification Program
The American National Standards Institute (ANSI) accredited five certification bodies under the new Toy Industry Association (TIA) Toy Safety ... more
October 23, 2009
EU-China Standards Information Platform Launched
The European Committee for Standardization (CEN) announced the official launch of the new EU-China Standards Information Platform, a project ... more
Show All..